Recommended Posts

Hi,

I work for a local government agency and we support both Police and Fire. We're currently having issues with people at the fire stations bringing in their own hotspots to bypass our proxy.

I'm wondering if there's a program that will scan for new wifi SID's and notify us via email when one pops up. These buildings are big and we rarely see any external wifi network show up so we know if a wifi SID pops up; it'll be from within the building.

Anybody know of a program that will give us that ability?

I've looked at a few but most don't have notifications of new networks. Cost isn't an issue.

All help is appreciated!!

Link to comment
https://www.neowin.net/forum/topic/1125638-monitor-wifi-access-points/
Share on other sites

The simple answer is no. The more explained answer is you are asking a system to monitor the air waves for any new ssids that pop up. These can come from anywhere. The best you can do is lock down your computers to a certain ssid and do not allow them to connect to anything else. Their computers and phones are their problems and you do not support them. I worked at local government on the municipality level as it support. You have absolutely no right to stop someone from bringing in their equipment and using their equipment. You have absolutely every right to lock your computers down so tight that if they sneeze on it you get notified.

You can write a very easy script for that because there's the "netsh wlan show networks mode=bssid" command that returns all the data about the detected networks (also useful for knowing the wifi channels of nearby networks in case you need to avoid interference). There are many powershell examples that show how to parse the result of the command, you only need to add some conditions to exclude your own known wifis and a few commands to send the email (both very easy tasks for which you can find plenty of examples on the web).

Cisco CleanAir can automatically tag and isolate rouge AP's. Though you're looking at a WLAN controller and Enterprise level AP's

Won't work, they are bringing in their own hotspots, not access points connected to the local network.

Actually what this guy wants to do is impossible, pretty much anyone with a phone these days can connect DIRECTLY to their own personal internet bypassing any proxy these guys are trying to use to filter THEIR corporate internet. Most smartphones will also allow their own broadband connection to be used as a hotspot too, or even using the USB port as a modem without broadcasting anything.

I work for a local government agency and we support both Police and Fire. We're currently having issues with people at the fire stations bringing in their own hotspots to bypass our proxy.

I doubt you can do what you want, but even if you tried to no doubt the staff would tell you to bugger off and mind your own business/network. You can't stop them using their own network on their own phones/devices.

You could always introduce some wireless interference so their hotspots won't work. Bit on the dodgy side perhaps...

that would be illegal :)

and would affect their own Access Points as well (if they are using them)

It isn't the staffs choice. First the the township manager signs off (everybody in the municipalities boss) then the chief of police signs off. Fire chief has no pull against their wishes nor does any other director. Then I push policies using ad group policies, I don't touch their computers at all and the default image only gives users user rights, no power user or admin level access.

There is a hierchy that needs to be followed and the end users have no say in the matter, even the patrolmen. The patrolmen had access to about 30 approved government sites, they were ****ed and tried to get that lifted...that got them a big can of shut the hell up from management.

I doubt it was possible but the IT Director asked that I pursue this per the request of the Fire Chief.

I guess we'll just have to update our IT policy forbidding the use of wireless devices not approved for use by the I.T. Department.

I doubt it was possible but the IT Director asked that I pursue this per the request of the Fire Chief.

I guess we'll just have to update our IT policy forbidding the use of wireless devices not approved for use by the I.T. Department.

Not my business, but what's wrong with people using their own devices? Like pointed above, any smartphone can function as a hotspot :/ Are you going to forbid smartphones?

(Don't mean to sound like a jerk, just curious is all).

Not my business, but what's wrong with people using their own devices? Like pointed above, any smartphone can function as a hotspot :/ Are you going to forbid smartphones?

(Don't mean to sound like a jerk, just curious is all).

From the sound of things, it sounds as if they are using their own hotspots with work-issued devices.

Not my business, but what's wrong with people using their own devices? Like pointed above, any smartphone can function as a hotspot :/ Are you going to forbid smartphones?

(Don't mean to sound like a jerk, just curious is all).

Are you kidding? on a corporate laptop or computer, it could be a huge security risk, not to mention any confidential data on the computers..

Here's some reading on securing your airwaves.

http://www.arubanetw...al_security.pdf

Here are some solutions to your problem.

http://www.arubanetworks.com/solutions/msp/

Are you kidding? on a corporate laptop or computer, it could be a huge security risk, not to mention any confidential data on the computers..

Here's some reading on securing your airwaves.

http://www.arubanetw...al_security.pdf

Here are some solutions to your problem.

http://www.arubanetw.../solutions/msp/

Yeah i'm probably "desensitized" on sensitive information... :p

BUTT that said, disabling wifi is easy, installing group policies as well. Eg email SHOULDn'T if not in same domain. Most desktops shouldn't have admin. privileges to install a wifi dongle (seeing as how most desktop don't come with built in wifi) etc...

"You could always introduce some wireless interference so their hotspots won't work. Bit on the dodgy side perhaps..."

that would be illegal :)

and would affect their own Access Points as well (if they are using them)

Not sure about in the US but it's illegal in the UK...

Unless you're part of the government or a government service (which includes fire and police) in which case it's legal :p

Also working for a local government LE agency I can tell you the BEST way to handle this type of situation is through policy with strict warnings/actions. And as to the comment above saying that introducing wireless interference is not illegal simply because you are part of the government or government service is incorrect.

Not my business, but what's wrong with people using their own devices? Like pointed above, any smartphone can function as a hotspot :/ Are you going to forbid smartphones?

(Don't mean to sound like a jerk, just curious is all).

We know that we can't control what people do on their phones/tablets/personal pc's. The issue is when these people use city owned equipment along with their personal hotspots/smart phones to bypass security we have in place to protect our network.

^ exactly, its not that they can browse porn (example) on their smartphone. Its that they are bypassing the company internet filtering, connecting the work device to an unsecured network, etc.

Your best bet is to lock down the work devices to only be able to connect to specific wifi APs and not allow the users to change these settings.

As to warning of these hotspots popping up, yeah the netsh script should be easy enough to setup so that you get a warning and details about the hotspot that is around.

The solution to the problem is a cell phone jammer. But that creates issues on a whole different level.

Everyone relies on their cellphones to communicate. Using a cell phone jammer would probably lead to a revolt...

We know that we can't control what people do on their phones/tablets/personal pc's. The issue is when these people use city owned equipment along with their personal hotspots/smart phones to bypass security we have in place to protect our network.

Firstly, it'd be very easy to create a simply bit of software that'll monitor the airwaves for new networks that show up and report them back. You can setup applications such as netstumbler that'll log the time and date of the networks as they come and go. That could be sent off at the end of the day for example.

A better bet would be to use something the common Linux wireless air* tools, usually used to crack networks, to monitor the active networks, including networks that do not broadcast their SSID and you'll also be able to see what devices are connecting to what network, by their MAC address. This would be proof that such dept hardware is connecting to say a Nokia cell phone acting as a access point.

However, its unlikely that you'll be able to block or do anything about people using their own devices to setup access points if they really wanted to.

What I would suggest is looked at enforcing a network policy on the dept machines so they can't join additional networks. That'd be the best option as even if the employees setup their own AP, they wouldn't be able to use the dept machines to connect to them (without a lot of spoofing, but that is possible anyway)

Hi,

We're currently having issues with people at the fire stations bringing in their own hotspots to bypass our proxy.

Are you sure they are bringing their own and not using a program like ultrasurf or such?

Anyway, I don't believe there is anything you can do other than install a key logger to see who's typing in a blocked address. Give every firefighter and officer their own account so they can't point fingers, etc.

The best you can do is lock down your computers to a certain ssid and do not allow them to connect to anything else.

Your best bet is to lock down the work devices to only be able to connect to specific wifi APs and not allow the users to change these settings.

What I would suggest is looked at enforcing a network policy on the dept machines so they can't join additional networks. That'd be the best option as even if the employees setup their own AP, they wouldn't be able to use the dept machines to connect to them (without a lot of spoofing, but that is possible anyway)

all of this, then you can stop playing games with trying to monitor crap. Know that they can't connect vs trying to bring the hammer down when they do connect.

all of this, then you can stop playing games with trying to monitor crap. Know that they can't connect vs trying to bring the hammer down when they do connect.

Yeah I know; but I was told by my boss to go down this route...so down this route I go.

I tend to disagree with his way of going about things; I've learned that it's easier to just do what he asks and when then that doesn't pan out I can do what the right thing is...but that's another story for another day.

Thanks all!!!

This topic is now closed to further replies.
  • Posts

    • Linux 7.2's first release candidate gets off to a good start by Paul Hill Credit: Larry Ewing It has been a few weeks since the release of Linux 7.1, and in that time, the Linux 7.2 merge window has been open, where developers can submit their features and patches ready for the upcoming release. That window is now shut, and the release candidate phase has begun so that new features can be tested and further fixes applied. According to the founder of Linux, Linus Torvalds, this week’s release candidate looks “reasonably normal”. Although we are super early in the release candidates, this is a good sign as it makes it more likely that an eighth release candidate will not be needed. Torvalds even mentioned that the update’s stats are only larger than they really are because there was another AMD header drop with a third of the patch just being AMD GPU register definitions, which aren’t big changes but make the code contributed look larger overall. In addition to this, he noted that just over half the patch is drivers, even when excluding the AMD register dump. The rest of the changes are spread out over architecture updates, tooling, documentation, and core kernel updates. In the next week, Torvalds says that he will be chilling out, taking the week “mostly off”. Despite this, he will be reading emails and keeping up with things, so if he is slow responding, now you know why. He said he is hoping for a calm week, but we will just have to see if the second release candidate is actually like that. We should expect seven or eight release candidates before Linux 7.2 is released, so expect it around the end of August. If you missed it a few weeks ago, be sure to check out our coverage of Linux 7.1's release.
    • Ridiculous claim that the labor cost difference of $6000 annually would increase cost per phone by $200. The employees produce 3 phones per month or what?
    • Sparkle 2.20.1 by Razvan Serea Sparkle is a free, open-source Windows optimization tool designed to make your PC faster, cleaner, and more private. With Sparkle, you can easily debloat Windows by removing unnecessary apps and services, disable Microsoft tracking to enhance privacy, and apply performance tweaks to boost speed. Its cleaner removes junk and temporary files, while every change is safe and fully reversible. Sparkle also features a modern, user-friendly interface with automatic updates, making system maintenance simple. Explore over 39 tweaks, from disabling telemetry and hibernation to optimizing network and game settings, all aimed at customizing and enhancing your Windows experience. Sparkle supports Windows 10 and 11. Sparkle 2.20.1 changelog: You can now change the Animation Direction from Up, Left, or Off. Added configurable animation direction (Up, Left, Off) for improved accessibility Added TTL caching to the system info backend Refactored tweak application flow to await NvidiaProfileInspector Improved IPC listener cleanup to correctly remove specific listeners Fixed online status not updating after successful network requests Updated system info tests to support backend caching Removed electron-toolkit utils dependency in favor of internal is.dev helper Fixed unwanted files and folders being included in application bundles Download: Sparkle 2.20.1 | Portable | ~100.0 MB (Open Source) Links: Sparkle Website | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Never used the G7 Pro, but I've never had a good experience with that style of d-pad and fighting games.
    • And I just bought a seat cushion for my mesh chair. The chair feels nice but the first time I sat in it with boxers, I realized I don't like the feel of mesh on my legs. 😂
  • Recent Achievements

    • One Month Later
      JKR earned a badge
      One Month Later
    • Dedicated
      Asgardi earned a badge
      Dedicated
    • Conversation Starter
      jessse3334 earned a badge
      Conversation Starter
    • Reacting Well
      JuvenileDelinquent earned a badge
      Reacting Well
    • One Month Later
      Excellence2025 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      496
    2. 2
      +Edouard
      247
    3. 3
      PsYcHoKiLLa
      154
    4. 4
      Steven P.
      86
    5. 5
      macoman
      65
  • Tell a friend

    Love Neowin? Tell a friend!