Recommended Posts

so I can play sc2 in the morning but then the same day at night it lags really bad.Now it is not my pc because my pc would have the same problems all the time so I ask around and I am told that my 3g may be trottled.What does that mean?My 3g is the cheapest in the country I get lots of MB's for very litle money.

why is it that 3g connection can be fast in morning but later that same day your ping is suddenly higher and can your ping be higher because of peek times?

Link to comment
https://www.neowin.net/forum/topic/1126778-3g-unstable/
Share on other sites

Mobile broadband based on UMTS, HSPA, LTE etc are all shared. You can't fit an infinite amount into data into a specific spectrum.

Wired connection is superior if you're looking for low latencies and consistent quality.

Wired is shared much further away from you and is more stable due to travelning in metal wires and fiber optics.

I would never settle for a mobile connection at home.

Your connection gets a specific amount of time to send and recieve. When the wireless network has a high amount of users, then latencies will increase and your maximum speed will decrease.

Think of it like sharing a wired connection with other people. You're all trying to use the same cable and once the cable is saturated, everyone will suffer. The air between your computer and the nearest tower is one cable and everyone wants to use that single cable.

Barely anyone uses their home connection in the morning. People go to work in the middle of the week, they sleep longer and chill on weekends and don't use their connection until they come home from work or have done their daily chores.

Internet usage peeks when the general population is free from work and other things.

Cheaper means that the carrier has more users per slice of capacity.

Companies pay a lot of money but that's due to them paying for a higher capacity, a guarantee of how much capacity they can get at any given time and how stable it is.

So the cheap service you pay for is on the other side of the spectrum where the corporate services are on the opposite end.

You get what you pay for.

Also, mobile connections are bad for gaming where latencies are relevant to the performance of the game.

Link to comment
https://www.neowin.net/forum/topic/1126778-3g-unstable/#findComment-595403908
Share on other sites

OK can one ISP be a lot faster perhaps 1 that is not so cheap.And adsl is a lot slower that 3g right?I have a family member that uses another ISP but it is also 3g so I am thinking why that it maybe be a good idea to randomly test its ping several times and then compare it to mine.It is a lot more expensive so hopefully it works better.I am not even sure what other tecnologies are avaible in south-africa or my general area in the middle of nowhere.But a adsl connection should be a lot worse for gaming than any 3g right?

Link to comment
https://www.neowin.net/forum/topic/1126778-3g-unstable/#findComment-595403946
Share on other sites

ADSL is NOT slower.

Maximum speed might be lower, but the overall average speed and latency is very likely to be superior to cheap 3G.

Don't look purely on the maximum speed advertised.

I'm not in any way, shape or form familiar with internet services in South Africa.

But here, in Sweden, ADSL is superior to mobile broadband, hands down, even if you have a lower maximum speed over an ADSL service.

Mobile broadband speeds that are advertised are what's possible to achieve under perfect conditions.

Get ADSL, it's worth a try, trust me. However, if the phone lines where you live are bad, then ADSL is bad. But it's worth a true. Give it a shot, maybe you can get a few weeks or months of testing before you sign up for a long period.

Link to comment
https://www.neowin.net/forum/topic/1126778-3g-unstable/#findComment-595403960
Share on other sites

  • 2 weeks later...

Playing video games on 3G isn't the best anyway. As your broadband package is cheap, are you sure your ISP doesn't have peak times where you just get throttled. The fact that 3G is shared too may be the answer to your question of why it lags so much during the day.

What kind of speeds are you getting on 3G to be able to game on it? It would drive me mad with the fluctuating pings.

Link to comment
https://www.neowin.net/forum/topic/1126778-3g-unstable/#findComment-595423146
Share on other sites

You get what you pay for. The less you pay for more likely it is that your provider will attract other customers also looking to pay as little as possible.

When cost is the main driving force, this makes it more likely that the ISP are also looking to cut their own costs resulting in lesser quality product (eg: spend less to get inferior networking equipment, spend less to have less backhaul that connects all their customers to the internet, spend less on staff and get less knowledgeable employees in the pool).

Even if you have an ADSL connection, your connection between you and your ISP will be fast, but then the connection between your ISP and the internet can be very slow at peak times if they are a budget ISP because all the ISP's customers will be sharing the same internet connection which goes from your ISP to the internet (this is called Backhaul).

A good ISP would buy a fast enough connection between themselves and the internet to ensure that even at peak times, it's still going to be enough for everyone, even if it is still probably going to be shared.

I would look at reviews for ISPs in your area for your area to see which are the good ones.

Generally ADSL, particularly ADSL2, ADSL2+, VDSL2, Fibre, etc. or other fixed services are going to be faster, because this speed is mostly constant between you and the ISP regardless of other users, it's just a matter if the ISP can handle the speed from their end with THEIR internet suppliers. With Wireless solutions, as said above, it is completed shared with all the other users connecting to the same radio tower in your area, regardless of how great the backhaul is from the Tower to the internet there is still this bottleneck.

Wireless radios work on different "frequencies" so that the wireless signals from other wireless radios do not interfere with each other. There is a finite amount of frequencies available for use because wireless radios are so common, from Radio Stations, Walky Talkies, CB Radio, Cordless Phones, Wi-Fi internet, Mobile Phones, TV, Radio, Military uses, Police/Emergency services, it is endless. A continuous group of frequencies is called spectrum (eg: all frequencies between 850mhz & 890mhz could be one spectrum).

The spectrum is auctioned off by the government to the highest bidder, and if it is your Wireless ISP who won it, then they only have between 850mhz and 890mhz to support all the Wireless internet connections in your area at once. In this example, 40mhz of spectrum (890mhz - 850mhz = 40mhz) can only possibly support a certain amount of users at maximum speed.

If you have more users than the 40mhz can handle, there are going to be slow downs unless your Wireless ISP can get new spectrum, which is a very long and expensive process to get the winning bid from the next government auction, and these auctions don't happen very often.

This is why fixed connections will always win over wireless. With a fixed connection, if the cable is not fast enough, the ISP can just dig up the ground and put in another. There is practically no speed limit (just have to pay for more digging and more cables) With Wireless, it is not so easy to add spectrum because there isn't much available to use, and when there is, it is an expensive long process to get it. You can't just start using someone else's spectrum without asking, because it will cause interference to their signals, it is extremely illegal and most likely would be hunted down by the government for doing it (Wireless radios can easily be traced to where they are coming from, just keep going in the direction where the signal is getting stronger).

Link to comment
https://www.neowin.net/forum/topic/1126778-3g-unstable/#findComment-595423174
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Yup, that's a doozy right there 😄
    • It's a bundle of tools created by a variety of people, so things can go wrong sometimes. It's a great addition to Windows, and I use a lot of the tools on a daily basis. Also, it's still a 0.**** release so quick updates are to be expected 😉
    • Oh, I did. And it's even worse than I was hoping! Besides a lot of techno-babble jargon (yes I understand 100% of it but it's still all just techno-babble) there's 2 key points that make me super-weary about even considering testing this out. -- By default, after installation, a relay is automatically set up, so you do not need to care about that. * Non-chatmail apps use email servers as a long-term message archive while chatmail clients use email servers for ephemeral instant message relay. * Supporting the full variety of classic email setups would require considerable development and maintenance efforts, and complicate making chatmail-based messaging more resilient, reliable and fast. -- Basically, the end-user device is the 'server' (relay) so there is NO ARCHIVING whatsoever because every message is necessarily ephemeral. Great for techno-paranoia (and for illicit activities preferring no tracks to cover) but terrible for everybody else. It's also ironically contradictory to engineering principles of redundancies besides the transport layers due to the explicit absence of any persistent storage. Instead of 'classic email address' retaining multi-GB messaging archives on its server, now every device must retain 100% of those storage demands. (Email messages were originally meant to be short correspondences, not the multi-MB attachments boondoggle that now exists with unlimited spam engines flooding every potential recipient.) Any device swap or reset (or loss) makes the entire message history go bye-bye forever... lest there's an off-device auto-archival "relay" mechanism that's really a separate server that holds onto all transported messages (an email server) that utilizes 'chatmail email address' identities (like an email server) and its own persistent storage archive (like an email server). But... this solution is hoping to exist alongside real-world email address identities (based on the email server relay pathway) but simply render messages in chat thread format in an ephemeral manner (with contents being encrypted, and messages auto-expiring) ... In the end, it's a chat app/experience for the Web3/P2P-at-all-costs zealots. (I have accts on all sorts of federated web3 services so I understand the technical and non-technical alike.) For any practical users, however, it's just another service to download/install, register, cross-share id cards/qr codes, but know that there's no history/archive whatsoever (by design) so no account/message recovery whatsoever... update the device, install a bummed update patch, or dare upgrade your device... all history, poof, gone. Ya gotta start everything over again like they're a brand new person.
    • You've tried DuckDuckGo and Brave Search, now get serious with SearXNG by Paul Hill Over the last decade, it has become quite trendy to dump Google Search in favor of privacy-preserving alternatives such as DuckDuckGo, Startpage, and Brave Search. These search engines have done a very good job at highlighting dodgy practices by Google, such as adjusting search results based on what it thinks you’ll like (filter bubble) and stalking you around the web to advertise to you. While these search engines are good starting points when compared to non-private services like Google, there are still quite a few issues with them. For example, both DuckDuckGo and Brave Search require running non-free JavaScript in your web browser, which is comparable to running proprietary software on your computer, meaning you can be sure about what it’s actually doing in the background. Another issue is that these search engines are hosted on the respective companies’ servers, and you are using a service that you don’t control. Finally, DuckDuckGo, while offering privacy features, relies heavily on Microsoft’s infrastructure for its results and, in the past, has permitted Microsoft tracking scripts. If you are looking for a more private search solution than DuckDuckGo, Brave Search, and Startpage, then I recommend taking a look at SearXNG. It is a privacy-respecting metasearch engine that can be used via different public instances, which is useful for mobile users, or you can install it on your computer or server and run it locally with maximum control. Unlike Google, Bing, or Brave Search, which crawl the web and have their own search indexes, SearXNG is a metasearch engine, meaning it taps other search engines, stripping your identifying data, such as IP address, user agent, and cookies, in the process. Your search query is sent to the other search engines you enable before aggregating the results. SearXNG has deployment flexibility. If you are a casual user or a mobile user and don’t want to run SearXNG locally, you can use a public instance that is hosted by someone else. The main problem with this is that you are putting trust in the maintainer of the instance regarding stuff like logs that they may keep; good hosts should have a privacy policy explaining their policies. If you are trying to use SearXNG, you can also install the software on your device and then head to 127.0.0.1:8080 in your browser and search from there. While you don’t have to worry about a third-party admin like the public instances, search engines could ultimately block your IP address if they frown on you pulling in their search results locally. If you want to run it locally, it’s a good idea to use proxies or VPNs to hide your actual IP. You don’t have to worry about this with a public instance, as search engines never see your IP address. The main privacy benefit of using SearXNG is that it isolates your identity from the underlying engines that it’s capable of searching, such as Google and Bing. These search engines will only see requests coming from a generic server, so they can’t profile you and create a bubble filter that influences what results you see. This also ensures that your search engine doesn’t turn into an echo chamber that prevents you from reading alternative points of view. As a free software project, you are allowed to inspect SearXNG to make sure there are no negative features bundled inside. This sets it apart from the privacy search engines mentioned earlier because you can’t check their source code. As a meta search engine, you are not restricted to getting results from one source. Due to the fact that it scrapes content from other websites, your SearXNG instance will periodically get blocked from different providers, so it’s good to select a range of sources as a backup. While enabling all of the services will give you great results, this can make searching slower. I am personally happy with slower searches for the best results, but you can always check which providers are slowing down your search from the search results page and disable them to speed things up. If you want decent results quickly, enable the main search providers such as Google, Brave, DuckDuckGo, Qwant, Bing, and Yahoo. This way, you get wide coverage without the latency. On the Engines tab in Preferences, do note that there are different tabs, such as General, Images, and Videos, with their own providers that can be toggled and are not covered by "Enable all" while on the General tab, so be sure to dig into each. Just a note, if you want to enable everything, press "Enable all" in one tab, then hit save at the bottom of the page, then do the next tab, and so on. If you press "Enable all", then do that in each tab, and then save, nothing will stick. When I had just some of the search engines enabled, I searched “define nefarious” and results came back with the definition of “define” - obviously that was a sucky result. However, when I had everything enabled, it found dictionary pages for the word “nefarious” and even had an inline definition on the sidebar, which is quite nice too - that was delivered by WolframAlpha for anyone wondering! Probably the worst thing about this meta search engine is that the engines you select are saved with a cookie, so you must enable them on every new device you use SearXNG on, including if you decide to go into incognito mode with your web browser. Honestly, I would say this is the most annoying aspect, and perhaps if your browser lets you choose a separate private browsing search engine, then it would be best to use DuckDuckGo for this portion of your browsing. Another weakness of SearXNG is the random blocking of it by search providers. When you are on the results page, expand the “Response time” box, and it will show things like “Suspended: too many requests” or “access denied”. This is why it is good to enable several providers so that there is always a fallback to get results from. I won’t pretend SearXNG will be for everyone, however, if you enable all of the providers and put up with the slower response time, the results can be really amazing. Even if you don’t want to use it as your daily driver, keeping a bookmark handy that links to it is a good idea if you ever feel like doing a deep dive into a niche topic where other search engines are just failing to bring up any good result, due to the amount of sources it looks on. If you’re interested in radical user control over the software you use, installing SearXNG locally can also be a good idea, but be prepared to be temporarily blocked from sites if you trigger bot sensors without a VPN. Personally, I’ve opted to use a public instance, rather than install it myself. If you want to use it via a public instance, head over to searx.space to find a provider. Let us know in the comments if you have used SearXNG or its predecessor, Searx. What do you think about the quality of the results?
    • Dear Neowin, If it is not too much trouble, can you start using the new-ish designations for Insider Preview? "Experimental" is different than "former Dev" as it can apply to different models, eg 26H1 or 26H2 etc, right? No need to seed confusion IMHO. And, please "finally" update your graphics. OK?
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      503
    2. 2
      +Edouard
      226
    3. 3
      PsYcHoKiLLa
      158
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!