Server + HTPC combined - What do you think?


Recommended Posts

I currently have a WHS 2011 serving a small HTPC. I was thinking of moving from WHS 2011 to Windows 8 and using my server as an HTPC. These are my server specs...

Intel Q6600

8GB RAM

Asus Formula board

ATI 5570

I used the board, cpu and RAM from an old PC build. Lately I've been thinking that this is way overkill for a server and because the server is always on whenever the HTCP is on I figured it might make sense to combine them.

About the only drawbacks I can think of are that the server is a bigger box and a little noisy. The former I can deal with but the latter I'll have to figure out how to quite things down.

Can you guys think of any other drawbacks?

It will simplify dvr funcitionality (getting rid of cable boxes and using Silicon Dusts 3 tuner) as well since I won't have to worry about how to set the htpc to record and drop onto the server for viewing elsewhere.

Thinking of also...

Continue using Drivebender for storage

WHS 2011 running within Virtualbox for pc backups

Server+HTPC combined is a great combo. one I run myself.

I use a bigger silverstone HTPC case with room for a ton of HDD's. and with a good silent PSU and a passive graphics card you won't need to worry about sound, the HDD mount also came with rubber rings to use between the disks and frame for dampening vibration. they've kind of "rotted" up pretty fast though, but could be replaces by any rubber washer anyway, and well, the HDD's don't make any noise on my rig anyway. One suggestion to improve

One suggestion for improvement though, make one auto logon acount for the actual media center, with Media Portal or Plex(plex is easier, but Media Portal is more powerful and is faster to update the libraries with live scans of the folders, and it has folder browsing for videos as well as the movie and tv series libraries). And another Account for remote management and server and potential legal download duties. To make this work you need to google a registry hack that allows you to have multiple simultaneous logons. that way you can log on to your server part and manage that without disrupting the media center.

Oh since you'll also be using a tv tuner and using it as a sat/cable box with PVR, You'll be using Media Portal over Plex anyway.

I have a very similar setup with almost the same machine specs, except I have a Radeon HD 5770 and run CentOS. I love it! Also, I vote for XBMC as your media center.

He's lookingfor a HTPC not a Media Center. XBMC has no tuner so it's useless. also XBMC's absolutely useless requirements for how to set up series in folders and naming for the library to show them properly makes all the other good things about it invalid.

He's lookingfor a HTPC not a Media Center. XBMC has no tuner so it's useless.

My mistake. I interpreted HTPC as media center. According to Wikipedia its more of a superset of what I was thinking of:

A Home Theater PC (HTPC) or Media Center computer is a convergence device that combines some or all the capabilities of a personal computer with a software application that supports video, photo, music playback, and sometimes video recording functionality.

also XBMC's absolutely useless requirements for how to set up series in folders and naming for the library to show them properly makes all the other good things about it invalid.

This I definitely disagree with. Library setup and naming convention is personal preference, but even if I disliked the way XBMC handles that aspect, its other features would still make it by far the best media center I've ever used.

Well except that Media Portal does everything XBMC does, and in some aspect better, especially the fact you can just dump all files for different series in a folder, the XBMC will instantly add them to the library with folder watching, and ad them to the correct series, with the correct season and episode and with fan art and all that. Plex, is easier to set up than MP, though it requires use of the Web interface, is a little bit slower with updating the library, but handles series just as fine from a single folder, as a bonus it has mobiel and tablet apps that can stream from your media server. of course plex doesn't have TV tuner capability so it loses out.

as such both MP And Plex are better alternatives than XBMC that does everything else just as good and handles series far far better. Not having to spend a lot of time organizing series into special folders would be a deciding factor even if both these alternatives where in some way worse than XBMC

either way, OT.

Thanks for the feedback guys!

TPreston - I live in an apartment. I did think of moving the server to my 2nd bedroom but it really isn't a big deal to leave it in my living room

Hawkman - I don't personally distinguish between HTPC and Media Center. And I actually used both WMC and XBMC in Windows 7. With Windows 8, I only really need WMC for TV viewing. I've also never really had any issues with setting up XBMC for metatags. I do use Metabrowser for tagging / media info though which I think makes a huge difference

Current beta of XBMC also supports tuners but I'll more than likely stick with WMC till it's final

So looks like I have a project to work on this weekend :) But first, I need to image my current setup in case I decide to go back

I use the following for mine:

  • Server 2012 Standard (Hyper-V Enabled)
  • Silverstone Grandia GD06 case in black
  • AMD Phenom X4 2.2Ghz / 8GB DDR2
  • 2x 1Gbit LAN (1x onboard, 1x PCI)
  • GeForce 650 GTX 1GB
  • 2xWD 3TB
  • 2xSamsung 1.5TB
  • 1x Samsung 1TB
  • Fortuna MCE Remote
  • Xbox 360 Wireless Controller Adapter

Used for Media File Server, XBMC (Hooked up to 42" Toshiba LCD TV), Hyper-V (running Linux, XP, Win7, Win8, Server2012), web server, domain controller, active directory, DNS, DHCP, backups, file server, software repository, ISO library, LogMeIn, RDP/RDS, media transcoding, audio encoding, Steam (Big Picture Mode).

Sits next to the Xbox 360 under the TV and isn't too loud at all (certainly a lot less noisy than starting up the Xbox).

I recommend Silverstone cases if you want it to look great in the living room whilst providing a good balance between noise and cooling.

Not to hijack this thread, but is there a way to get a tuner to run on a Windows 2012 Server Essentials VM (with WMC addon, haven't attempted to install it yet) that is hosted on ESXi 5.1?

I'm not clear on what you're trying to do. You're trying to install WMC to 2012 Server Essentials? I don't think you can

I use the following for mine:

  • Server 2012 Standard (Hyper-V Enabled)
  • Silverstone Grandia GD06 case in black
  • AMD Phenom X4 2.2Ghz / 8GB DDR2
  • 2x 1Gbit LAN (1x onboard, 1x PCI)
  • GeForce 650 GTX 1GB
  • 2xWD 3TB
  • 2xSamsung 1.5TB
  • 1x Samsung 1TB
  • Fortuna MCE Remote
  • Xbox 360 Wireless Controller Adapter

Used for Media File Server, XBMC (Hooked up to 42" Toshiba LCD TV), Hyper-V (running Linux, XP, Win7, Win8, Server2012), web server, domain controller, active directory, DNS, DHCP, backups, file server, software repository, ISO library, LogMeIn, RDP/RDS, media transcoding, audio encoding, Steam (Big Picture Mode).

Sits next to the Xbox 360 under the TV and isn't too loud at all (certainly a lot less noisy than starting up the Xbox).

I recommend Silverstone cases if you want it to look great in the living room whilst providing a good balance between noise and cooling.

I actually have 4 2TB drives with intentions of adding more at some point

Hyper V - why do you have all those OS's?

My server is in this case...

http://www.lian-li.c...=38&ss_index=95

In Black. Aesthetically I think it's fine. Just that it's a full tower

EDIT - didn't realize you have 5 drives. Do you have room for more? I should have room for about 8 drives I think

Thanks for the feedback guys!

TPreston - I live in an apartment. I did think of moving the server to my 2nd bedroom but it really isn't a big deal to leave it in my living room

Hawkman - I don't personally distinguish between HTPC and Media Center. And I actually used both WMC and XBMC in Windows 7. With Windows 8, I only really need WMC for TV viewing. I've also never really had any issues with setting up XBMC for metatags. I do use Metabrowser for tagging / media info though which I think makes a huge difference

Current beta of XBMC also supports tuners but I'll more than likely stick with WMC till it's final

So looks like I have a project to work on this weekend :) But first, I need to image my current setup in case I decide to go back

Honestly, while WMC works great, I would suggest you give MP a go. it works as a server/client solution as well so you can connect to it with other computers running the client, you can have a far better EPG experience by setting up WebEPG to download the EPG as far ahead as you want instead of the cable/satellite epg. it's also fully skinnable with great skins, and has been a round since XBMC (it started as a fork, but has hardly any XBMC code left now) so it's solid and stable. And of course it gives you everything in one system that can be fully navigated with a remote. also WMC is pretty much standing still and has been still since win7 release.

I actually have 4 2TB drives with intentions of adding more at some point

Hyper V - why do you have all those OS's?

My server is in this case...

http://www.lian-li.c...=38&ss_index=95

In Black. Aesthetically I think it's fine. Just that it's a full tower

EDIT - didn't realize you have 5 drives. Do you have room for more? I should have room for about 8 drives I think

Application development, testing, lab, compatability.

Windows 8 VM is used when I need to get to something running at home from a remote location (RDP or LogMeIn). I also use it for "Play To" to the other Xbox 360's in the house as it doesn't suffer from MCE lag and doesn't seem to care what format/resolution the media is. Windows 7 lives for MCE but doesn't get used a lot now. Server 2012 is used for my RDS Gateway & connection broker.

I have a 2.5" bay free for which I have a 640GB drive for but haven't installed it yet. Will move the host OS VHD onto it to free up read/writes to the 1TB drive. I don't have any more official bays unless I make my own drive cage CPU side of the case. I do have a USB 3.0 enclosure at my disposal but I don't have an USB3.0 card installed anymore due to the bloody huge GTX over hanging the PCI-E 1x slot.

The Lian-Li's are very nice cases. For my choice I did a lot of research as I wanted a purpose built HTPC case that could live under the TV in a living room environment.

This topic is now closed to further replies.
  • Posts

    • Onkyo Dolby Atmos AV receivers are really solid deals by Sayan Sen Recently we covered great deals on several soundbar models from the likes of Sony, JBL, Samsung and others for really good prices (the lowest in several months). Aside from that we also reported on the Edifier S3000MKII, a hi-fi two-way bookshelf monitor that's available for only $800. Today we bring a list of AV receivers from Onkyo that are available at great prices including the Onkyo NR7100, RZ30, and 8470 (purchase links under the specs table down below). The Onkyo TX-NR7100 and Onkyo TX-RZ30 are both 9.2-channel AV receivers designed for immersive home theater setups but they occupy slightly different tiers within Onkyo’s lineup with the RZ30 positioned as the more advanced model. The TX-NR7100 is a THX Certified 9.2-channel receiver offering up to 100 W per channel (8 ohms, 2 channels driven). It supports Dolby Atmos, DTS:X, and IMAX Enhanced formats, with flexible configurations such as 5.1.4 or 7.1.2 speaker layouts. A key highlight is its built-in Dirac Live Room Correction which should help optimize sound based on your room and its acoustics. In comparison, both models share several core capabilities though the RZ30 is geared toward enthusiasts seeking more precise calibration and system flexibility, while the NR7100 is positioned as a slightly more accessible, value-focused option with strong all-round performance. The technical specs of the RZ30 and NR7100 9.2 AVRs are given in the table below: Specification Onkyo TX-RZ30 Onkyo TX-NR7100 Power Output (FTC, 2ch driven) ~100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) 100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) Dynamic / Peak Power 9 × 170 W (6Ω, 1kHz, 1% THD, 1ch driven) 220 W/ch (6Ω, 1kHz, 10% THD, 1ch driven) Frequency Response 5 Hz – 100 kHz (+1/-3 dB) 10 Hz – 100 kHz (+1/-3 dB) THD 0.08% 0.08% Room Correction Dirac Live (full bandwidth) Dirac Live (with AccuReflex support) Immersive Audio Dolby Atmos, DTS:X, IMAX Enhanced Dolby Atmos, DTS:X, IMAX Enhanced Speaker Layout Support Up to 7.2.2 / 5.2.4 / 9.2 processing Up to 7.2.4 / 5.2.4 / 9.2 processing HDMI Inputs / Outputs 6 inputs / 2 outputs (eARC) 6 inputs / 2 outputs (Main + Sub/Zone 2) HDMI 2.1 Support 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC Video Formats HDR10+, Dolby Vision, HDCP 2.3 HDR10+, Dolby Vision, HDCP 2.3 Streaming / Network Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Get them at the links below: Onkyo TX-RZ30 9.2-Channel AV Receiver: $797.00 (Sold and shipped by Electronic Expo) Onkyo TX-NR7100 9.2-Channel AV Receiver: $699.00 (Sold and shipped by Adorma) Onkyo TX-8470 2 Ch Stereo Receiver: $449.00 (Sold and Shipped by Adorma) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links or authorized dealer links (at the time of article publishing); ensure that you purchase from such links only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • A different thing with Russia. When you say is it better, depends on things. It is better that we don't have the E.U making rules and laws that have nothing to do with them. Is the trading part better? No, that is really mucked up, but then we knew that was going to happen and we would have make agreements, like we do with other parts of the world. Freedom of movement is certainly better, but could be improved, we still need more control over our borders. do you live in the U.K?
    • So what am I quoting from them? I never listened to what Farage or his cronies said. I wanted the U.K to leave the E.u years before the referendum and it had nothing to do with Farage and his cronies. So what country do you live in? Did we work much better together? We were always at logger heads with the E.U because we disagreed with them so much. Maggie was always on at them. I would have thought the E.U was glad to get rid of us as we stopped the integration or made it a two tier. Now without us they can integrate more. I would not have voted out if it was just a trading block and we can still work together on somethings.
    • MPC-BE 1.9.0 by Razvan Serea Media Player Classic - BE is a free and open source audio and video player for Windows. Media Player Classic - BE is based on the original "Media Player Classic" project (Gabest) and "Media Player Classic Home Cinema" project (Casimir666), contains additional features and bug fixes. The BE mod (Black Edition Mod) is a skinned version of Media Player Classic Home Cinema, much better looking than the plain old MPC. MPC-BE 1.9.0 changelog: Splitters Fixed crashes in some situations. AudioSplitter Added support for the RF64 format. Fixed reading of channel layout for some WavPack files. Added support for ID3 tags for Wave64 files. Unknown Wave64 chunks are now ignored. AviSplitter Added support for 'y408' video. Improved support for 'HEVC' video. FLVSplitter Added support for VVC video. MP4Splitter Improved handling of corrupted files. MatroskaSplitter Expanded support for V_UNCOMPRESSED video codecs. Fixed support for frame rotation (ProjectionPoseRoll). Improved support for "V_MS/VFW/FOURCC / HEVC". MpcDvdVideoDecoder Fixed conversion to YUY2. Fixed display of menus for some DVD-Videos. RoQVideoDecoder Output in NV12 and YV12 formats is allowed. Full range is used. MPC Video Decoder RGB32 format will be output as a top-down bitmap by default. Added support for the "IID_MediaSideDataDOVIMetadataV2" interface. Removed support for the deprecated "IID_MediaSideDataDOVIMetadata" interface. Fixed retrieving the name of the video adapter when using NVDEC. Fixed crashes in some situations. MPC Video Converter Added support for AYUV video format. MpcAudioRenderer Improved input format validation. Optimized retrieval of supported formats for exclusive mode. Added the "Keep audio device active when paused" setting. Fixed crashes and freezes in various situations. Subtitles Added the ability to open the properties of an external subtitle renderer in the "Subtitles" settings panel. Fixed external subtitle connections for VSFilter. Fixed a crash when rendering PGS/SUP subtitles when using AVX2. YouTube Improved support for yt-dlp. The built-in YouTube parser is no longer used. Player The HTTP read strategy has been changed. If the playlist contains one entry, more key combinations can be used to control the player (jump through chapters, adjust volume). Improved support for reading ASX playlists. The translation of the MediaInfo report for Chinese, Korean and Japanese has been removed. Added blocking of 32-bit filter "PICVideo Lossless JPEG Decompressor" (pvljpg20.dll), because it crashes. Added blocking of the system filter "AVI Decompressor", which will eliminate the crash of VFW codecs. Fixed a rare crash when using the "/slave" key. Fixed a crash when getting a list of fonts for OSD. Added the ability to load an external audio file using hotkeys. Fixed opening a network path starting with \?\UNC. The "Determine duration when adding" playlist setting now works for YouTube video URLs. The "Online media services" settings panel has been redesigned. Added a "Merge files using FFmpeg" option to the file saving dialog. This option is activated when playing multiple streams obtained using yt-dlp. Added loading of local .dpl playlists ("DAUMPLAYLIST"). Fixed a hang when the user closes the player during the URL opening process. Various interface fixes. Installer Updated MPC Video Renderer 0.10.5. Updated MPC Script Source 0.2.17. Added MPC Image Source 0.3.6. Translations Updated Japanese translation (by tsubasanouta). Updated Chinese (Traditional) and Dutch translation (by beter). Updated Romanian translation (by Andrei Miloiu). Updated Hungarian translation (by mickey). Updated Turkish translation (by cmhrky). Updated German translation (by Klaus1189). Updated Chinese (Simplified) translation (by wushantao). Updated Italian translation (by mapi68). Updated Korean translation (by Hackjjang). Updated Chinese (Traditional) (by udfbe). Updated libraries dav1d 1.5.3-6-g04b69f9; ffmpeg n8.2-dev-1857-g4653e68aab; libpng git-v1.6.55-9-g7d52a8087; Little-CMS git-lcms2.18-26-gf739cda; MediaInfo git-v26.05-38-g702c9b7fd; ZenLib git-v0.4.41-91-g073f297; zlib 1.3.2. Download: MPC-BE 64-bit | Portable MPC-BE 64-bit | ~20.0 MB (Open Source) Download: MPC-BE 32-bit | Portable MPC-BE 32-bit Link: Media Player Classic - BE Home Page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Apple reportedly looks to blacklisted Chinese memory chips as RAM prices climb by Karthik Mudaliar Image via Apple Apple is reportedly trying to get a clearance from the Trump administration to buy memory from ChangXin Memory Technologies (CXMT) to get some relief from soaring DRAM prices. As per a report by the Financial Times, Apple approached the Commerce Department more than a month ago and also spoke to other officials and allies in Washington. For starters, CXMT is a company that's already been placed on the Pentagon's list of Chinese military companies. The Chinese company is the country's top DRAM maker. For Apple, the timing is certainly awkward but not surprising. Tim Cook had recently warned that Apple would have to raise prices because AI companies are buying up large amounts of memory for data centers, and just like that, Apple raised MacBook and iPad prices. Micron also recently revealed that customers have committed billions of dollars to secure memory supply years in advance, which shows us how aggressive securing infrastructure has become. This gives suppliers such as Samsung, SK Hynix, and Micron more leverage, while pushing hardware makers to look for alternatives. CXMT is one of those alternatives, but not the simplest one. Apple has spent many years trying to diversify parts of its supply chain away from China, especially for final assembly, while still depending heavily on Chinese manufacturing and suppliers. Even domestic brands from China are moving towards CXMT and YMTC instead of relying on Samsung, Micron, and SK Hynix. For Apple, though, it would invite more scrutiny than local Chinese companies. For now, this is more like a lobbying effort rather than a confirmed supply deal. There's no official statement from either of the parties. What is clearer, though, is the pressure behind such a request. AI demand has certainly made hardware a bottleneck, and companies are trying everything they can to bring things back to normal, even if that means making politically sensitive choices. Source: Financial Times
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      493
    2. 2
      +Edouard
      227
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!