PSU dying?


Recommended Posts

I was playing a game last night and the whole system suddenly shutdown on me. Not a BSOD, but a complete shutdown. The only thing I know of that can do that is when the system gets too hot, and it has to shutdown to protect itself. I do not think it is due to this, I have my suspicions that the PSU is going bad due to a fairly new HDD suddenly failing. Could I be correct in my theory that the PSU could be causing this? I am plugged into a UPS, and it did not shut off when the system did, so I know that the issue is isolated to the PC alone.

Link to comment
https://www.neowin.net/forum/topic/1127944-psu-dying/
Share on other sites

That is a strange one! How old is the existing PSU? What size PSU is it? (Watts) I have seen this happen and it has been the PSU at fault, so you are correct in guessing it could be this, Have you put any new hardware in recently? or replaced any? - If you go into the BIOS, does it show how many watts your using at all? Or does it show the other possible issue, temperature?

Link to comment
https://www.neowin.net/forum/topic/1127944-psu-dying/#findComment-595417828
Share on other sites

Run a CPU testing program, available on the internet.

http://www.computerh...es/ch001089.htm

To test whether this is an overheating problem, leave the case open, and blow air in with a floor fan.

If the computer does not shut down, while you are running a game, then it is a heat problem.

Then work on a better cooling system, starting with regooping your CPU with new thermal paste.

The only test for a PSU problem, is to put in a new one. :/

Link to comment
https://www.neowin.net/forum/topic/1127944-psu-dying/#findComment-595417968
Share on other sites

If you have the slightest doubt in the psu I would consider replacing it asap before it dies completely and takes other things with it You said "I have my suspicions that the PSU is going bad due to a fairly new HDD suddenly failing", I would constantly backup new information you cannot replace till you nail this problem down as a precaution Good luck ...................... In addition a new psu is relatively inexpensive...same brand about $90 on Newegg

Link to comment
https://www.neowin.net/forum/topic/1127944-psu-dying/#findComment-595417976
Share on other sites

What is your ambient room temp? If that Aida SS was for idle temps, I would be concerned about what temps you would be hitting after running at 80%+ load for 30+ mins

~70F (This is Florida still! :))

If that was idle, that chipset looks awefully high. Run some Prime95 and see how those temps look. Check your fans, clean your case of all dust (remove case front face plate and clear out dust), and then clear up any heatsinks of dust).

Sorry, at the time those were not idle temps, I have included a new screenshot.

Even your GPU is high for being idle :/

...assuming that's idle temps.

Again, those were not idle temps, my fault! :/

Are you overclocking? Your sig says Phenom II X4 @ 3.5ghz.

Yes, by a half ghz, have been for over 4 years, with no real problems.

If you have the slightest doubt in the psu I would consider replacing it asap before it dies completely and takes other things with it You said "I have my suspicions that the PSU is going bad due to a fairly new HDD suddenly failing", I would constantly backup new information you cannot replace till you nail this problem down as a precaution Good luck ...................... In addition a new psu is relatively inexpensive...same brand about $90 on Newegg

Indeed, I have two cloud backup programs running to keep all important data from the windows drive, I also have 3 other HDD's that I have some stuff stored on. I plan on getting a new PSU within the next month or so, should I stick with OCZ or is there any better companies?

New temp screenshot from idle now!

post-243659-0-71311200-1356647823.png

Link to comment
https://www.neowin.net/forum/topic/1127944-psu-dying/#findComment-595418652
Share on other sites

It depends what brand OEM OCZ use to rebrand as their PSU's. They had a pretty bad record until they came out with the Mod Xtreme range. As comparison, my Corsair PSU has done a similar 5 year service to the your PSU without skipping a beat. Sadly your out of luck with 3 year warranty.

The CPU idle temps still concern me. When was the last time you applied paste to your CPU and how is the airflow in your case? I have 4 case fans with a similar ambient room temp and here are my temps

2QRMs.jpg

Save yourself forking out for a new PSU because it might not be at fault. Take your PC apart and give it a good clean. Put your ear next to the PSU and make sure it isn't making any odd sounds. Check your paste and if its old and rotten, clean it and re-apply. It could really be anything but I suspect your CPU turned off after hitting Tj. Max. Not sure but your GPU may also be overheating however I might be wrong as you would normally see a BSOD if it did

Link to comment
https://www.neowin.net/forum/topic/1127944-psu-dying/#findComment-595419036
Share on other sites

This topic is now closed to further replies.
  • Posts

    • Now comes with a money back guarantee instead of a replacement! Hah
    • Rufus 4.15.2391 Beta by Razvan Serea Rufus is a small utility that helps format and create bootable USB flash drives, such as USB keys/pendrives, memory sticks, etc. Despite its small size, Rufus provides everything you need! Oh, and Rufus is fast. For instance it's about twice as fast as UNetbootin, Universal USB Installer or Windows 7 USB download tool, on the creation of a Windows 7 USB installation drive from an ISO (with honorable mention to WiNToBootic for managing to keep up). It is also marginally faster on the creation of Linux bootable USBs from ISOs. A non-exhaustive list of Rufus supported ISOs is available here. It can be especially useful for cases where: you need to create USB installation media from bootable ISOs (Windows, Linux, UEFI, etc.) you need to work on a system that doesn't have an OS installed you need to flash a BIOS or other firmware from DOS you want to run a low-level utility Rufus 4.15.2391 Beta changelog: Improve the guards for using the "silent" option Improve the ability to cancel during write retries Fix unrestricted XML entity expansion and integer overflow in ezxml parser (courtesy of @esadowski4) [GHSA-55r2-34wg-8mv9] Fix "silent" Windows installation failing at 75% in most cases [#2960] Fix a crash during boot when using UEFI:NTFS on Snapdragon X based ARM64 platforms [#2934] Fix the first WUE option always being checked by default [#2965] Fix an infinite loop when using Windows ISOs that contain multiple WIMs Fix "Enable runtime UEFI media validation" checkbox not always being properly enabled Other WUE improvements/fixes for OneDrive removal and username validation (with thanks to @christian8641) [#2984, #2991] Download: Rufus 4.15 Beta | 1.9 MB (Open Source) Links: Rufus Home Page | Project Page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Media Player Classic - Home Cinema 2.7.3 by Razvan Serea Media Player Classic - Home Cinema (MPC-HC) is a free and open-source video and audio player for Windows. MPC-HC is based on the original Guliverkli project (which is no longer maintained) and contains many additional features and bug fixes. As the continuation of the original Media Player Classic, MPC-HC isn’t flashy but it works with nearly any media format. MPC-HC uses DXVA technology to pass decoding operations to your modern video card, enhancing your viewing experience. And MPC-HC supports both physical and software DVDs with menus, chapter navigation, and subtitles. Overview of features A lot of people seem to be unaware of some of the awesome features that have been added to MPC-HC in the past years. Here is a list of useful options and features that everyone should know about: Dark interface Menu > View > Dark Theme When using dark theme it is also possible to change the height of the seekbar and size of the toolbar buttons. Options > Advanced Video preview on the seekbar Options > Tweaks > Show preview on seek bar Adjust playback speed Menu > Play > Playback rate The buttons in the player that control playback rate take a 2x step by default. This can be customized to smaller values (like 10%): Options > Playback > Speed step Adjusting playback speed works best with the internal audio renderer. This also has automatic pitch correction. Options > Playback > Output > Audio Renderer MPC-HC can remember playback position, so you can resume from that point later Options > Player > History You can quickly seek through a video with Ctrl + Mouse Scrollwheel. You can jump to next/previous file in a folder by pressing PageUp/PageDown. You can perform automatic actions at end of file. For example to go to next file or close player. Options > Playback > After Playback (permanent setting) Menu > Play > After Playback (for current file only) A-B repeat - You can loop a segment of a video. Press [ and ] to set start and stop markers. You can rotate/flip/mirror/stretch/zoom the video Menu > View > Pan&Scan This is also easily done with hotkeys (see below). There are lots of keyboard hotkeys and mouse actions to control the player. They can be customized as well. Options > Player > Keys Tip: there is a search box above the table. You can stream videos directly from Youtube and many other video websites You can stream videos directly from Youtube and many other video websites Put yt-dlp.exe or youtube-dl.exe in the MPC-HC installation folder. Then you can open website URLs in the player: Menu > File > Open File/URL You can even download those videos: Menu > File > Save a copy Tip: to be able to download in best quality with yt-dlp/youtube-dl, it is recommended to also put ffmpeg.exe in the MPC-HC folder. Several YDL configuration options are found here: Options > Advanced This includes an option to specify the location of the .exe in case you don't want to put it in MPC-HC folder. Play HDR video This requires using madVR or MPC Video Renderer. After installation these renderers can be selected here: Options > Playback > Output Ability to search for and download subtitles, either automatically or manually (press D): Options > Subtitles > Misc Besides all these (new) features, there have also been many bugfixes and internal improvements in the player in the past years that give better performance and stability. It also has updated internal codecs. Support was added for CUE sheets, WebVTT subtitles, etc. Media Player Classic - Home Cinema 2.7.3 changelog: Updated LAV Filters to version 0.82 Updated MPC Video Renderer to version 0.10.4.2550 Updated MPC Audio Renderer A few crash fixes, bug fixes and small improvements. Download: MPC-HC 2.7.3 (x64) | Standalone | ~20.0 MB (Open Source) Download: MPC-HC 2.7.3 (x86) | Standalone Links: MPC-HC Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Microsoft will finally let you sign in to Edge with a Google account by Usama Jawad As things currently stand, Microsoft Edge only allows you to sign in to the browser with a Microsoft Account (MSA). This allows you to sync your browser settings and other data across other devices, as long as you sign in with the same account. However, Microsoft is now modifying this mechanism in a way that will likely please many users. In an update to its Microsoft 365 Roadmap, Microsoft has indicated that it will soon let users sign into Edge using a Google account from the profile menu and the Edge sign-in screen. This will be in addition to the MSA login option, and it opens up new doors for people who prefer using Edge, but cannot be bothered to configure a Microsoft account. This brings several advantages such as the ability to sync your data across devices using just a Google account. It may even facilitate flexible single sign-on (SSO) experiences where you can quickly login to websites and services through a single Google account that is presented as the preferred sign-in option. Up until now, Microsoft allowed customers to indirectly use a Google account, by configuring a Google account as a Microsoft account, or by setting up a one-way sync option between Edge and Chrome. This is a rather interesting development, especially considering that Google Chrome still limits you to a Google account sign-in, but it will be interesting to see if the company reciprocates Microsoft's gesture in the future. This is not the only recent instance in which Microsoft has extended a handshake to Google via Edge. In April 2026, it began tracking the development of a work search banner for Google Search queries, just like the one present in Edge. However, if we go back almost seven years, to January 2020, Microsoft had emphasized that it had no plans to "integrate Google services into Microsoft Edge by default", in response to people requesting Google sign-in services on Edge. Fast-forward to today, and Microsoft is planning to release this feature in July 2026, with IT admins having the option to control its availability on Windows and macOS through the NonMicrosoftAccountSignInEnabled policy.
    • If they ever come out and say the AI is no longer accessible to the gen pop people aren't going to know how to tie their own shoelaces.
  • Recent Achievements

    • One Month Later
      Vincian earned a badge
      One Month Later
    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      89
    4. 4
      Steven P.
      76
    5. 5
      neufuse
      69
  • Tell a friend

    Love Neowin? Tell a friend!