Additional Internet Connection Required


Recommended Posts

Hi All,

I have my main PC in the conservatory and the modem is connected to a wireless router and then i have 4 x outputs from the router, one of which runs via ethernet to my main PC, and the other runs via ethernet around the outside of my house to my lounge (i don't like using wireless).

I have the lounge ethernet connection connected to my Media Streamer, however the PS3 also required internet and at the the moment i'm constantly pulling out of the streamer and into the ps3.

My question is this:

Can i purchase another router to plug the lounge ethernet end into a router and then have another 4 x outputs so i can run another ethernet from the new lounge router into the PS3 even though the lounge end comes out of a router already in the conservatory? Otherwise it means i will need to run another ethernet from the conservatory pc wireless router and drill through walls again to get it around the house and into the lounge.....

So you are going to buy a new router to get 4 more Ethernet ports ? Get an end of life switch like the Cisco Catalyst 2948G-GE-TX (48 Gigibit Ethernet ports) for 80 bucks or a lame unmanaged 8 port one for 20.

Wire everything into that

As stated you don't need a "router" if what you want to do is add wired ports then you need a switch. Plug your lan cable from your 1st router into this new switch and there you go more lan ports. Depending on the switch you buy it might be 3 more ports, 4 more ports, 7 more ports, 15, etc..

Since you were thinking you could buy a router - I doubt you have any use of a smart or managed switch ;) So the GS108T is not really required - any dumb 10/100 or 10/100/1000 switch should work for you. They can be had for $10-? depending on how many ports you want, other features, etc. Here is like 67 of them all under $25

http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100010066%204093&IsNodeId=1&name=%2410%20-%20%2425

Hi Guys many thanks for your reponses.

Im in the uk, so would the attached provide me with what I need even though im splitting the signall after its gone into and come out of a netgear wireless router?

Edit: meant to post this link

https://www.google.c...wAQ#hsec:online

You should be looking for gigabit 10/100/1000 ports

Hi Guys many thanks for your reponses.

Im in the uk, so would the attached provide me with what I need even though im splitting the signall after its gone into and come out of a netgear wireless router?

Edit: meant to post this link

https://www.google.c...wAQ#hsec:online

Yes, it'll work fine.

Any network switch will be fine for what you want. Streaming devices or PS3 will be fine on 10/100 network and doesn't need gigabit. Chances are your router isn't anyway so there is no point in spending the extra on something you have no need for. However, look around you should be able to pickup a cheap TP link switch or other lesser known brands that'll be more then enough for what you want, for cheap. 10/100 base switches are next to given away on the likes of ebay.

http://www.scan.co.u...ethernet-switch for example, ?6.59

http://www.ebuyer.co...100-switch-s105 or ?3.99

http://www.overclock...rodid=NW-040-TP ?6.49

You'll plug your existing Ethernet cable from your router into one of them switch. Then two new cables from the switch into your streamer and ps3. Job done. Those I've linked don't even care what type of cable you use either, so just buy the cheapest cat5 cable (that's long enough for what you need) to go with it.

Hi Guys, many thanks for the responses, very much appreciated.

My router is a Netgear WNR2000 Wireless N Router, do you know if that is a Gigabit or a 10/100?

What is the difference? The Gigabit is faster i assume?

Unfortunately your router doesn't support gigabit (Standards - Five (5) 10/100 [1 WAN and 4 LAN] Ethernet ports with auto-sensing technology), but having a gigabit switch, with your devices connected through it would give you gigabit transfer speeds on your network just through the switch (by-passing the router). That's if you need gigabit speeds to begin with, which it looks like you wouldn't as you're just after switching a single cable on your current network for your PS3. You can pick up a 100Mb switch for even cheaper! But the choice is yours...

And to answer your question, yes gigabit (1000Mb/s) is faster than 100Mb/s :)

Even if his current router does not support it, why not buy the switch that does support it just in case he gets a new router that does one day?

That is my thinking at least.

Even if his current router does not support it, why not buy the switch that does support it just in case he gets a new router that does one day?

That is my thinking at least.

Well as BudMan pointed out, it's only ?16 for a GS105. Whether the OP wants 1000 or 100 I'm sure the price difference wouldn't break the bank. I too would go for / suggest gigabit.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • If someone chooses to continue using SB and therefore goes through the manual intervention in the thread, afterwards the BSOD problem is gone. Whether they then re-enable the task doesn't matter, they're done, though on such machines it might pay to keep it disabled in case the next update (if there is a next) causes the same problem. OTOH, if someone disables SB in the BIOS, the problem is also gone. Incidentally, I noticed that this task exists even on machines that don't support SB. It's just installed across the board...and runs. Doing what on such machines is a little hazy.
    • qBittorrent 5.2.2 by Razvan Serea The qBittorrent project aims to provide a Free Software alternative to µtorrent. qBittorrent is an advanced and multi-platform BitTorrent client with a nice user interface as well as a Web UI for remote control and an integrated search engine. qBittorrent aims to meet the needs of most users while using as little CPU and memory as possible. qBittorrent is a truly Open Source project, and as such, anyone can and should contribute to it. qBittorrent features: Polished µTorrent-like User Interface Well-integrated and extensible Search Engine Simultaneous search in most famous BitTorrent search sites Per-category-specific search requests (e.g. Books, Music, Movies) All Bittorrent extensions DHT, Peer Exchange, Full encryption, Magnet/BitComet URIs, ... Remote control through a Web user interface Nearly identical to the regular UI, all in Ajax Advanced control over trackers, peers and torrents Torrents queueing and prioritizing Torrent content selection and prioritizing UPnP / NAT-PMP port forwarding support Available in ~25 languages (Unicode support) Torrent creation tool Advanced RSS support with download filters (inc. regex) Bandwidth scheduler IP Filtering (eMule and PeerGuardian compatible) IPv6 compliant Available on most platforms: Linux, Mac OS X, Windows, OS/2, FreeBSD qBittorrent 5.2.2 changelog: FEATURE: Use D-Bus to show file in file managers (Chocobo1) #24340 BUGFIX: Fix friendlyUnitCompact precision calculation (vafada) #24323 BUGFIX: Remove all top-level folders (glassez) #24333 BUGFIX: Use proper API for checking exit status (Chocobo1) #24349 BUGFIX: Delete stale lockfile when hostname mismatch (TurboTheTurtle, glassez) #24363 BUGFIX: Fix wrong removal procedure of watched folder paths (Chocobo1) #24413 BUGFIX: Don't reannounce before interface changes are applied (glassez) #24447 BUGFIX: Use Latin script for Bosnian locale name (Andy Ye) #24342 WEBUI: Fix performance of global checkbox toggling (tehcneko) #24316 WEBUI: Fix Safari transfer list header misalignment (Piccirello) #24377 WEBUI: Fix error when submitting magnet before metadata loads (Piccirello) #24378 WEBUI: Use correct row id when updating Rss Downloader feed selection (Chocobo1) #24402 WEBUI: Use SameSite=Lax for session cookie to fix cross-site login (Piccirello) #24422 WEBUI: Bring back properties panel expand/collapse button (vafada) #24430 WEBAPI: Only use X-Forwarded-Host header when reverse proxy support is enabled (Chocobo1) #24457 RSSS: Fix "RSS Smart Episode Filter" RegEx (nathanon-akk, glassez) #24398 RSS: Fix previously matched episode format (glassez) #24452 WINDOWS: Fix Python fallback search path (TurboTheTurtle) #24325 WINDOWS: NSIS: Allow to install x64 binary on ARM64 (Chocobo1) #24358 Download: qBittorrent 5.2.2 | 41.1 MB (Open Source) Download: qBittorrent 64-bit installer (qt6) | 43.6 MB Links: qBittorrent Home page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Weechat. https://weechat.org/
    • they should stop making bad games that no one asked for
  • Recent Achievements

    • Veteran
      branfont went up a rank
      Veteran
    • Reacting Well
      Almohandis earned a badge
      Reacting Well
    • First Post
      Cosminus earned a badge
      First Post
    • One Year In
      ThatGuyOnline earned a badge
      One Year In
    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      483
    2. 2
      +Edouard
      183
    3. 3
      PsYcHoKiLLa
      123
    4. 4
      Steven P.
      87
    5. 5
      neufuse
      72
  • Tell a friend

    Love Neowin? Tell a friend!