Recommended Posts

I just started having this problem today but first some background;

I live 3 doors up from my Grandmother and we both have wifi routers. Our internet is faster than hers but its throttled at peak times, so I bought a long range WIFI adapter which has a little satellite type thing for an ariel. It works great and picks up about 10 networks! Where as the one I had before picked up 2.

What I usually do is at 5PM (start of peak time) I connect to my Grannys router to use her internet as ours is down to 1MB.

Last time I used it was 2 nights ago and it worked fine, got downstream of 7mbit.

However, since then I cannot connect anymore. I can connect to my own router fine though (with signal as low as 50%, however its usually 100%)

If I point the adapter the right way, I can get 100% signal quality and 84% signal strength to her router but its always limited connectivity (no internet).

when I leave IP settings as default, its assigning me an IP of something like 70.264.30.22 but when it was working 2 days ago, my IP was 192.168.1.8

The subnet is 255.255.255.0 and the gateway is empty. It also says unkown network

When I set the IP to manual and force myself an IP of 192.168.1.8 (or 192.168.1.X) and the gateway to 192.168.1.1 (which i know is correct, its also in my browser history) it now picks up the network name but still limited connectivity.

When I manually set the IP's I can ping the router and get 4 replies all under 6ms. However I still can't connect.

I cant even open the routers config in browser at 192.168.1.1 It just says error, server never replied any data.

Not sure whats wrong here, it was working fine before and with signal at 84% (100% quality) I thought it should connect no problem.

she isn't at home justnow so I cant reset the router either.

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/
Share on other sites

verify your grandmothers settings on her router, check the IP on her computer and see if she can get out. then check your settings.

yeah thats my next plan, unfortunately shes not home but will do this as soon as she is.

Just dont understand why it connected fine before on auto IP but now im having to manually set the IP to even get a connection.

It could be her router crapped out, some third party routers do that and are fine after a reboot. Or perhaps your gran enabled mac filtering :D

haha could be the first one. Definitely not the second! haha she can get to facebook thats about it! I've seen her type google into google! rofl!

Also, even if it were MAC filtering, i would get an error or something rather than just no IP or SSID until i manually set an IP.

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423574
Share on other sites

I've seen her type google into google!

Heh I think that's a trait with old people. To come to think of it, you're right if mac filtering was enabled, you wouldn't be able to connect to the network. Try the following commands in elevated command prompt:

ipconfig/release

ipconfig/flushdns

Then disable your wired adapter if you are wired leaving only the wireless adapter enabled enter these in command prompt:

ipconfig/renew

ipconfig/registerdns

Now connect to her network after and see if there's any change:

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423586
Share on other sites

Heh I think that's a trait with old people. To come to think of it, you're right if mac filtering was enabled, you wouldn't be able to connect to the network. Try the following commands in elevated command prompt:

ipconfig/release

ipconfig/flushdns

Then disable your wired adapter if you are wired leaving only the wireless adapter enabled enter these in command prompt:

ipconfig/renew

ipconfig/registerdns

Now connect to her network after and see if there's any change:

No still no change :(

Dont get this at all. When I leave it at auto, the router assigns me no IP which Is why I dont get connectivity obviously

when I manually do it, all I can do is ping the router

I was just thinking that her router has one of those connect buttons, you know you press it and then connect to it. Maybe thats why I can't connect?

However, I've never had a problem before :s

setup remote access like teamviewer or logmein free so that you can troubleshoot when she isn't home.

Thats a great idea :) I will definitely do that in the future

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423602
Share on other sites

Hmm that's odd. Does your gran have an ADSL or Cable connection?

ADSL

Cant figure this out at all, don't think she will be home till atleast tomorrow either.

looks like I may just have to put up with throttling for a day or two :(

I would put it down to the distance, had I not connected before and have signal of 84%

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423628
Share on other sites

Is it possible to sign into the router and check logs? I know with mine there is an option (though depending on the modem) this sometimes can only be checked when connected directly to it.

That may shed some light - on what is going on.

afraid not, once I manually set IP, the network ID comes up (rather than unidentified network) and I can ping 192.168.1.1 but can't visit in browser :(

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423634
Share on other sites

I have seen this once a while ago- you may want to check to see for example if the device is set to hibernate on the computer it is attached to... In other words let us say your grann'ys computer goes to sleep so it will tell the modem to hibernate as well (it didn't before because you were using it) Just a thought.

That is just a thought of something to check based upon the -- it was working -- then poof no internet.

also have this a look --

http://support.microsoft.com/kb/813827

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423640
Share on other sites

I have a sneaky suspicion her modem/router has lost its WAN connection or it may have a built in feature to auto disconnect from the ISP after a certain amount of time idle. When your nan gets back ask her to cycle power the modem/router's power and I'm sure you should be able to connect again without a problem

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423644
Share on other sites

Are you with virgin media?

One thing I don't understand about throttling is that their throttling gets the internet slow to a crawl when I download a certain amouth with a wired connection but itcs normal when downoading through a wireles connection... :s

Why is this? Anyone else experienced the same? :confused:

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423688
Share on other sites

Thanks for the further tips guys, I'm thinking you could be right, I haven't spoken to her for a few days but last time I was logged in I did notice she hadn't been connected for atleast a day before that and she is the only user.

I am with Sky but they have no hardware in our exchange so they are reselling BT. Therefore we can only get Sky Connect which is throttled between 5 and 1AM

BT don't throttle in my area as its their hardware, thats who Gran is with and who we will be switching to in a month when our Sky contract is up :)

EDIT:

Been doing some reading and the 169.254.x.x IP I am getting is a Link Local address. Its what windows assigns when the computer doesnt get an IP from the router.

So by me manually assigning the IP, thats why it seems a little better when infact it isn't. The router is still doing (or not doing) the same thing.

Guess I'll just need to wait until she is home to reboot it and like others have said, I suspect that will fix the problems.

(Or maybe I could somehow cut the power to her house to restart it :laugh: haha)

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423710
Share on other sites

Thanks for the further tips guys, I'm thinking you could be right, I haven't spoken to her for a few days but last time I was logged in I did notice she hadn't been connected for atleast a day before that and she is the only user.

I am with Sky but they have no hardware in our exchange so they are reselling BT. Therefore we can only get Sky Connect which is throttled between 5 and 1AM

BT don't throttle in my area as its their hardware, thats who Gran is with and who we will be switching to in a month when our Sky contract is up :)

EDIT:

Been doing some reading and the 169.254.x.x IP I am getting is a Link Local address. Its what windows assigns when the computer doesnt get an IP from the router.

So by me manually assigning the IP, thats why it seems a little better when infact it isn't. The router is still doing (or not doing) the same thing.

Guess I'll just need to wait until she is home to reboot it and like others have said, I suspect that will fix the problems.

(Or maybe I could somehow cut the power to her house to restart it :laugh: haha)

Definitely sounds like something has gone wrong her end, if shes not in the house atm, maybe shes unplugged a few things, you know how oaps are for worrying ;)

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423786
Share on other sites

its maybe only even 2 depending on how its counted

5-----7------9 -----11

^gran---------------^us

If there was a way to lay some Ethernet, I can't stress enough how wrong it would be for you to get a mate or two and a jimmy/crow bar (commonly called breaker bar from the local hardware stores) and lift the slabs outside your house to slip under some cable or even throw Ethernet cable up into the cutters (if you're in terraced houses). I certainly wouldn't advise taking a spade, sticking it in garden at the front or rear about a foot down to make a trench and then dropping the cable in and pressing it back so it doesn't look like you've been digging.. nope. I've never done anything like that and you shouldn't either! while these ideas and any others you can think of to get Ethernet connected between you and your gran are much better then wireless for connectivity you shouldn't do it. It might seem attractive for 30meters worth of cat5 for around ?8 to get gigabit (using cat6) connectivity when you only want to use her internet... hmm, at least you don't have to worry about lightning with wireless right.

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423894
Share on other sites

If there was a way to lay some Ethernet, I can't stress enough how wrong it would be for you to get a mate or two and a jimmy/crow bar (commonly called breaker bar from the local hardware stores) and lift the slabs outside your house to slip under some cable or even throw Ethernet cable up into the cutters (if you're in terraced houses). I certainly wouldn't advise taking a spade, sticking it in garden at the front or rear about a foot down to make a trench and then dropping the cable in and pressing it back so it doesn't look like you've been digging.. nope. I've never done anything like that and you shouldn't either! while these ideas and any others you can think of to get Ethernet connected between you and your gran are much better then wireless for connectivity you shouldn't do it. It might seem attractive for 30meters worth of cat5 for around ?8 to get gigabit (using cat6) connectivity when you only want to use her internet... hmm, at least you don't have to worry about lightning with wireless right.

I did think about putting a cable up in the guttering as it is terraced houses lol!

Not worth it now though as I have the long range wifi and we will be changing providers soon and wont have any more throttling to put up with :)

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595424548
Share on other sites

"its assigning me an IP of something like 70.264.30.22"

Well I highly doubt it was anything like to be honest, for starters 264 is not even a valid octet ;)

I would guess the IP was APIPA, and started with 169.254.x.x

This is the automatic random IP many OSes setup when set for DHCP and no dhcp server answers.

Nothing to be done until you can check the router - for all we know she turned on mac filtering ;) You say you can ping her router, can you access it via its remote console. This is quite often disabled via wireless in the first place as a security measure, etc. But you could try - if you can then you can verify it has wan connection and its dhcp server is on, etc.

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595424708
Share on other sites

"its assigning me an IP of something like 70.264.30.22"

Well I highly doubt it was anything like to be honest, for starters 264 is not even a valid octet ;)

I would guess the IP was APIPA, and started with 169.254.x.x

This is the automatic random IP many OSes setup when set for DHCP and no dhcp server answers.

Nothing to be done until you can check the router - for all we know she turned on mac filtering ;) You say you can ping her router, can you access it via its remote console. This is quite often disabled via wireless in the first place as a security measure, etc. But you could try - if you can then you can verify it has wan connection and its dhcp server is on, etc.

yeah sorry I didn't copy the IP down that was written from memory (only glanced at it). Yes you are correct it was 169.254 :) I realised my mistake when I posted later about the Link Local IP (169.254.x.x)

Yeah I will just have to wait until she is home.

I can ping 192.168.1.1 but if I visit that in browser then it just times out. Chrome gives me error of server didn't respond with any data (or words to that effect)

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595424808
Share on other sites

Its very bad practice to allow router admin gui access from wireless - I would hope most routers have this disabled by default..

Or it could be that just the router has crashed and all its really doing is answering pings. Which would explain why you can not get on the internet even if you setup an IP on its range and point to it as gateway. You sure that is the routers IP your pointing to for gateway and dns, and not some other IP on the network ;)

The most likely issue is router is just hosed/crashed/hung, etc. And a reboot will fix it up.

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595424824
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • For some reason I suddenly have the urge to go shopping at Sears.
    • So I did a quick test based on 3+ different public instances from the litany at searx.space ... and it spins everything rather differently. It seems that SearXNG is a meta-search engine (queries multiple search indexes rather than only Google's or Bing's or Wikipedia's or Reddit's) that operates in two modes: > public instances ... each instance opens itself to outside users who piggyback on its cached search history; this instance's own identity becomes known/tracked but end-users are hidden similar to an anonymization proxy; this instance's querying of major search indexes may be API based [rated limited, blocked, etc.]). > private instances ... your private install/instance that itself queries multiple (configurable) search indexes of crawled web content; every major Search Engine associates all traffic to your private instance (so your traffic is tracked via network usages) but client-side tracking (your own browser/computer specs) is flushed because it's a "server" doing the querying rather than your browser. My test asked the same 1 question to the 3+ engines and they all returned vastly different results: some had CAPTCHA failures against Google, some had failures against Wikipedia, and the actual results were also different -- some had auto-complete enabled, others returned a wikipedia highlighted excerpt despite the Wikipedia failure (hinting at results being cached from previous keyword matching), and others just gave an Are-You-Human non-CAPTCHA loop before returning random results. So this begs the caveat: Search query results will vary based on which instance is used because every instance queries the other search indexes separate (and thus its results are influenced on that instance's aggregate search history and index-access limitations). The major distinctions for SearXNG versus DDG or Brave: > The search UI is 'untracked' since no UI trackers are baked-in which would phone home or lay cookies into your browser (for DDG/Brave usage stats), > There is no 'crawler' that canvasses the Internet to discover fresh content (it leaves that to the major search indexes), > Queries multiple search indexes ("meta-search engine") based on the configurations and usage history of the server instance, > Privacy-friendly due to its ability to shield user tracking via standing up a non-local server instance connectable to major VPN providers: queries would all appear to come from general VPN/Proxy providers rather than your private instance (whether installed locally or on your own VPS in the cloud). PS: I've previously come across specialized search engines of this nature that indexes searches across media assets like YT, OF, etc. SearXNG seems to be a good backbone...if the rate-limiting/captcha/etc. issues were resolved.
    • For a guy who claims to hate Farage and the ignorant, gullible, rightwing racist skinheads sponsored by Putin that his lies represent, you sure are quoting them time and time and time again, mate. I guess you're conveniently ignoring the fact that your country and commonwealth just happened to work much better when it was still part of the E.U.? Denial isn't just a river in Egypt.
    • Do you live in the U.K? Do any of the people here that are against the UK leaving the E.U, live in the U.K? If not then why are you bothered? If you do live here then it is a different thing . Brexit was a good idea, should have done it years before, it was done badly, but the idea was good. You are saying the same thing as remainers do, oh we did what Putin wanted, we listened to the lies and Farage. I hate Farage and never believed most of what he said, certainly did not believe the £350m a week for the NHS. But we did pay a lot of money to the E.U and yes some of it came back, but what is the point of paying it out for only some of it to come back? Get out of the E.U, no money to them and in theory we can use the money to do things in the country. I said in theory, but our governments are a total and complete waste of space. No matter what colour rosette they wear. You and others say it was a mistake and yet the two main parties in the U.K are not looking at rejoining the EU, I wonder why that is? I was not tricked by anyone. Makes no odds now, we are out and have been for 10 years, what we need is a decent government to run the country. All they do is shout at each other like a load of kids and seems to do nothing and make this country more into a police and nanny state. Getting more like China all the time.
    • 4TB TEAMGROUP MP44Q, 2TB T-Force G50, and 2TB WD My Passport SSDs drop to great prices by Fiza Ali Prime Day may be over, but there are still worthwhile storage deals available, including discounts on SSDs for shoppers who missed the event or are looking to upgrade their storage solution. Particularly, 2TB Western Digital My Passport, 2TB TEAMGROUP T-Force G50, and 4TB TEAMGROUP MP44Q SSD are selling at great prices with up to 23% off. The 2TB TEAMGROUP T-Force G50 is an M.2 2280 PCIe 4.0 x4 NVMe SSD with sequential read speeds of up to 5,000MB/s and sequential write speeds of up to 4,500MB/s. The drive has an endurance rating of 1,300 TBW (terabytes written) and features a DRAM-less design. The company specifies a mean time between failures (MTBF) of 3 million hours. The drive includes an "ultra-thin" graphene heat spreader that helps dissipate heat without significantly increasing the drive's thickness. It also supports S.M.A.R.T. monitoring, allowing compatible software to monitor drive health and operating status. The SSD is rated for operating temperatures from 0°C to 70°C, with a storage temperature range of -40°C to 85°C. The drive is backed by a five-year limited warranty as well. 2TB TEAMGROUP T-Force G50 SSD: $269.99 (Amazon US) The TEAMGROUP MP44Q is an M.2 2280 PCIe 4.0 x4 NVMe SSD that delivers sequential read speeds of up to 7,000MB/s and sequential write speeds of up to 5,900MB/s. It uses 3D QLC NAND flash memory to provide 4TB of storage capacity for games, applications, media files, and other data. The drive has an endurance rating of 2,000 TBW and an MTBF of 1.6 million hours. The SSD features a DRAM-less design and supports TEAMGROUP's S.M.A.R.T. monitoring software, allowing users to monitor drive health, temperature, and remaining lifespan. For thermal management, the MP44Q also includes an "ultra-thin" graphene heat spreader. It is designed to operate at temperatures between 0°C and 70°C and can be stored at temperatures ranging from -40°C to 85°C. The SSD is also backed by a five-year limited warranty. 4TB TEAMGROUP MP44Q SSD: $478.99 (Amazon US) The 2TB WD My Passport SSD connects via a USB-C port using the USB 3.2 Gen 2 interface. It delivers sequential read speeds of up to 1,050MB/s and sequential write speeds of up to 1,000MB/s through NVMe technology. In terms of security features, the drive includes password protection with 256-bit AES hardware encryption. The SSD is also designed to resist shock and vibration and is rated to withstand drops from heights of up to 6.5 feet. The recommended operating temperature range is 5°C to 35°C, while the non-operating temperature range is -20°C to 65°C. This drive is also backed by a five-year limited warranty. 2TB Western Digital My Passport SSD: $279.99 (Amazon US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      492
    2. 2
      +Edouard
      225
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!