Coolermaster HAF case Replacement


Recommended Posts

I have a coolermaster HAF case, I have no idea which version it is, though for my question I think it does not matter.

You know those covers that are on the case before adding an optical drive? Well I threw mine out a long time ago when I built my system, thinking I will never need it again.

I am now moving forward into the future, I have 2 optical drives that I am selling because I never use it, all USB. (and i do have other ways in case I do need it).

But now I have a big hole in the front of my case.

Anyone know where I can get a part like that, I don't even know what to search for. How do I find out which version of the HAF case I have?

Link to comment
https://www.neowin.net/forum/topic/1129024-coolermaster-haf-case-replacement/
Share on other sites

Here it is, it's apart for other reasons at the moment. Hopefully they are good enough images for someone to know which version. Looking for the cover, and just based off how that looks, I think it's a 932.

eEAMG.jpg

k7oyx.jpg

EgYKN.jpg

That's the original version the 932. I can confirm that.

Yup, my brother has the same one too

I only have 1 x card reader in mine and all the rest are blanked and its been a few years since I bought the case so if I did have any spares, I have no idea where they would be, plus its the 922 not the 932, I expect they will fit but haven't tested it

I`ll have a look tomorrow but don't expect much, I haven't come across any for at least a year or more, ebay is your friend for this one

What about adding an usb3 front panel or some hard drive racks? The racks always useful and there are some which are screw-less (you just insert the 3.5 hard drive and close the bay and the connectors snap in place).

I am purchasing a new hard drive tomorrow, and the hard part is the power and sata cable is still up near where the blu-ray drive was, and it's going to take awhile to move it down to the buttom.

Do these hard drive racks have a cover for them too?

That's a good case with good internal layout; side loading 3.5" drives, bottom PSU, decent cable managment space, and decent air flow. You can contact coolermaster for replacement bay covers.

The only thing I don't like about this case, is it's not painted black on the inside.

On Coolermaster's website, they have a "Request Parts" page. I recall using it myself a while back, and I think they may have even sent it out for free IIRC. Worth a shot at least.

If I don't get any from here or other sites, then yea I will use that request page. Thanks guys.

That's a good case with good internal layout; side loading 3.5" drives, bottom PSU, decent cable managment space, and decent air flow. You can contact coolermaster for replacement bay covers.

The only thing I don't like about this case, is it's not painted black on the inside.

Yea, have had it for quite some time, it's an awesome case. But I agree, being painted black inside looks much better.

I have another question about the case.

My front 120mm Red LED fan has been dying. What I mean is first, the LED lights seem to be much dimmer now, also the bigger problem is that the fan will stop spinning randomly.

Not sure how long, but it stops 100%. I try to spin it to get it going and nothing happens, after awhile, not sure how long, I try again it starts spinning. Happens randomly.

Is this a problem with the fan, or is it a problem with the motherboard (its plugged into the motherboard).

I am hoping to find some in town near me from someone who doesn't want them (free).

If not thank you very much, that's everything I was looking for. I guess the 120mm fan I was talking about is actually 230mm.

The only problem might be, its the US store, I am in Canada. We will see.

*To my previous question, how do I know if it's my motherboard or fan that is problematic?

I am hoping to find some in town near me from someone who doesn't want them (free).

If not thank you very much, that's everything I was looking for. I guess the 120mm fan I was talking about is actually 230mm.

The only problem might be, its the US store, I am in Canada. We will see.

*To my previous question, how do I know if it's my motherboard or fan that is problematic?

i figured that much and i checked that before posting :) "We only ship to US and Canada Only." good luck.

  • 3 weeks later...

So I haven't tested the fan, because it's all done a way and I can't seem to find where the fan is plugged into.

Though my side case fan I had off for awhile, just plugged it back in to put the side door on, and it isn't spinning. There are only 2 spots to plug in a fan as far as I can see, so I test the other port and it's still not spinning.

So, would that indicate a problem with the motherboard, or could that still be the two fans now? They are old enough I suppose.

I just don't want to go by some fans, and have them still not work. Anyway I can test it...

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Read this in Humor Simpson 's voice, "Out of my way Moe".
    • You still can, its just under the Transform flyout for WordArt now
    • Likely nothing will be done in corporate America, there have been countless Tesla self-driving incidents. Then again, there have also been countless human operated incidents. It's literally daily news here in Canada, to the extent that it's now odd if we get a day where a collision doesn't get announced on the radio throughout the day...
    • SKG Hand Massager with Heat OS500 hands on by Steven Parker I was offered the chance to test out the SKG Hand Massager with Heat OS500, and full disclosure, they let me keep it regardless of my findings. Anyway, I jumped at the chance due to my long hours sitting at my desk, mousing around. Apologies for the knife cut across the top of the box; that was my doing, being a bit too heavy-handed with opening up the outer packaging. First up, what's in the box: SKG Hand Massager with Heat OS500 1x Type-C charging cable User Manual 1-Year Warranty (card) In short, everything you need to get started. According to the official Amazon listing, here are the key features: Full-Hand Air Compression: OS500 wraps your fingers, palm, and wrist with multi-chamber air compression for a complete hand relaxation experience. The extended massage chamber helps cover more of the hand and wrist area than standard palm-only hand massagers Palm Kneading with 6 Modes & 6 Intensities: Built-in palm kneading rollers add a hands-on massage feel, while 6 preset modes and 6 pressure levels let you choose the comfort level that fits your day—from gentle relaxation to a firmer full-hand massage 3 Heat Levels with Cooling Fan: Choose from 104°F, 113°F or 122°F warmth to suit different seasons and comfort preferences. The built-in cooling fan helps reduce stuffiness during heated sessions, keeping your hand feeling fresh and comfortable Easy Visual Display & Smart Timer: The digital image display clearly shows massage area, mode, intensity, heat level, and remaining time at a glance. Select 10, 15, or 20-minute sessions for quick office breaks, evening relaxation, or everyday hand care Rechargeable, Cordless & Comfortable: A 3000mAh battery supports over 90 minutes of full-function use on a full charge, with convenient USB-C charging. The soft inner lining, smooth ABS/PU finish, and premium black-gold design make OS500 ideal for home, office, or gifting With all that out of the way, here are my own findings. I gave it a try on both left and right hands, and as you can maybe see from the above YouTube Short, (sorry for the shaky video), my whole hand fits in, but my wrist barely enters the Hand Massager. I was able to push through a bit more with my fingertips extending out the other end to get a bit of massaging on the start of my wrist. Usage For some reason, there is a strap that is very difficult to fasten to my wrist with one hand. I am not sure what function it has, and it isn't mentioned in the user manual. The only thing I could find was in the product images that claimed "wrist precision". Unlike the Bob and Brad Hand Massager, this device does not massage the wrist anyway, even though a "wrist mode" is mentioned, which must be for smaller hands than I have, as it is mainly intended for the hand and fingers. In addition, for its steeper price, there are no disposable gloves provided in the box, which is a bit of an issue considering the internal cover (which appears to be elasticated nylon) cannot be removed for washing; so you are left with only one choice: always thoroughly wash your hands before using it. I can imagine this thing getting a bit grimy after a period of use, and that is a bit of a shame. With that said, the buttons on the device, from left to right, do the following: Heat button: 3-level heat control at 104°F, 113°F, or 122°F Mode button: Auto mode Circular mode Soothing mode Relax mode Palm and fingers mode Palm and wrist mode Intensity button: from (First-time users) 15Ka, 25Ka, 35Ka, 45Ka, 55Ka, 60Ka (Intensive relief) Knead button: on or off (6 pressure levels) Power button: Long-press to turn on or off Cooling button: turn on or off the cooling fan Also, in the product imagery, it states there are 36 "custom modes," but nowhere is it listed what these modes are. I can only imagine that they mean a combination of all of the above settings in different intensity levels. The device itself seems to rely on a single "kneading" mechanism located at the palm area of the hand, which spins when in use, and the other massage features are mainly utilized through the air sacs, increasing and decreasing at various levels on the hand and fingers. I am not sure it offered too much relief for someone who is typing and operating a mouse for hours at a time; further testing may be required. It does feel nice, though. Finally, you may be wondering how this fits into the scope of a tech website? Well, let me tell you something: sometimes I sit for up to 15 hours working on Neowin, and although I take breaks in between, it takes a toll on my body. I think in the immediate absence of a partner to apply relief, a good massager like this Hand Massager can shed the strains of the day in just a couple of 15-minute bursts. On the official website, this has an MSRP of $99.99, but luckily for our readers, it is selling at $10 off for just $89.99 right now on Amazon. SKG Hand Massager with Heat OS500 for $89.99 (with $10 off coupon), $99.99 MSRP For me, this gets a thumbs hands(?) down. However, it could be improved by making it so that the protective covering could be removed and thrown into the washing machine, or get yourself some disposable gloves to use with it. As an Amazon Associate, we earn from qualifying purchases.
    • Thanks for the info, but I'm still not sure if I need this....
  • Recent Achievements

    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
    • First Post
      DrWankel earned a badge
      First Post
    • Reacting Well
      DrWankel earned a badge
      Reacting Well
    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      505
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      86
    4. 4
      Michael Scrip
      78
    5. 5
      Steven P.
      76
  • Tell a friend

    Love Neowin? Tell a friend!