Recommended Posts

Hey Neowin^^

As a new owner of a Galaxy Tab 2 which comes with a very short USB-cable I wondered if it's safe to use a regular USB 2.0 extension cable with the wall-charger? I'm not sure because a wall-outlet obviously provides more power than the usual USB 2.0 port so I figured I would ask first before I fry something :pinch:

Thanks for any answers in advance :)

I just recently tried to do this on my iPad but it didn't work. It said it wasn't charging, but it was doing a trickle charge as if it was plugged into the PC. I was just using a little 3 foot USB 2.0 extender, but again doesn't work with the iPad

Whoa that was quick, thanks for the fast replies everyone^^

Just don't use it after midnight.

And Hum but but... okay :( I guess wall-chargers need their sleep too :rofl:

Or get it wet!

Awww there goes my idea of watching anime underwater while exploring a coral-reef :(

I just recently tried to do this on my iPad but it didn't work. It said it wasn't charging, but it was doing a trickle charge as if it was plugged into the PC. I was just using a little 3 foot USB 2.0 extender, but again doesn't work with the iPad

Oh okay that is interesting, I guess I just have to try and see what happens :/

EDIT: And that reminds me, could I somehow trick my PC's USB 3.0 ports to provide the Galaxy Tab 2 with USB 3.0 power even though it's only a 2.0 device?

To the dude who commented on his iPad not charging - not all pins were connected. That would have been a sync cable not a sync'n'charge cable. On Android, it's usually a more common usb cable so no such worries.

Ah yeah that would also explain why my iPhone 4 would sometimes switch to "Charger not supported" when I used a old, beat-down iPod cable before, I guess due to the nature of the connection-port Apple devices are a bit more sensitive with that :/

My dog ate my charger cord, and I had some spare 3 or 4 feet (not sure which, it's been a while back) usb 2.0 extension cables laying around....so I ended up soldering together an extension into my factory USB cable, which made it around 6 feet long or so, and works like a charm! Then, I thought...well, this could work...so I plugged in another 3 foot extension into my wall wart, plugged my droid into the "franken-cable", if you will, and now I have about 9~ish feet of cord for when I can't be right beside a plug in, for example. It works without any problems. (Y)

  • Like 2

My dog ate my charger cord, and I had some spare 3 or 4 feet (not sure which, it's been a while back) usb 2.0 extension cables laying around....so I ended up soldering together an extension into my factory USB cable, which made it around 6 feet long or so, and works like a charm! Then, I thought...well, this could work...so I plugged in another 3 foot extension into my wall wart, plugged my droid into the "franken-cable", if you will, and now I have about 9~ish feet of cord for when I can't be right beside a plug in, for example. It works without any problems. (Y)

Whoa okay if even such a franken-cable works I'm not scared of issues anymore^^ Nice job with this! :D

If you have to buy one you might consider a USB 3.0 cable so that it will work with many different devices. As a example the ASUS TF requires a 3.0 cable due to a special charging design.

Well I still have a ton lying around but thanks for the suggestion as that might be a good future-proof advice :)

Don't charge it with a RED SHIRT!!!! I WARN YOU!!!

But but does that even apply when I'm not in Starfleet Captain Remixedcat? D:

This topic is now closed to further replies.
  • Posts

    • Tidal won't monetize AI slop music, company says by David Uzondu Image via Tidal Tidal has announced an AI policy aimed at protecting artists and their crafts, as AI music generation tools continue to improve both in speed and quality. According to the music streaming platform, AI-generated music will be accepted, but these tracks will be held to a "higher standard" of content integrity. Next month, the company plans to auto-identify and tag these uploads. Listeners will spot a special icon next to content that algorithms flag as 100% AI-generated starting mid-July, and the platform hopes to expand this tag to partially generated songs as detection tech improves. Any AI music that exploits an artist's voice or likeness will be taken down, and Tidal will immediately block tracks associated with fraudulent activity, which includes artificial streaming and deceptive content that interferes with real creators. And finally, music that's 100% AI-generated will not be monetized. Tidal said there is "ongoing debate" about whether certain licensed synthetic models deserve payouts, so it's possible that this part will change in the future. Streaming platforms are absolutely getting flooded with AI-generated music because of how easy it is to pump out endless tracks every minute. To give you an idea of how "bad" it is, Deezer alone reported that synthetic uploads now make up about 44% of its daily intake, which translates to roughly 75,000 automated tracks hitting its servers every single day. Interestingly, Deezer found most people cannot tell the difference between human and machine creations, with an Ipsos study revealing that 97% of listeners failed to spot the AI-generated tracks. Spotify's CEO recently pushed back against listeners who call AI music "slop," urging people to stop using the term and instead embrace the creative potential of AI music. The Swedish platform partnered with Universal Music Group to test "legal and controlled" generative AI tools that let subscribers remix songs with AI.
    • According to Microsoft, Cause: One of the drivers controlling the device notified the operating system that the device failed in some manner.   https://support.microsoft.com/en-us/topic/error-codes-in-device-manager-in-windows-524e9e89-4dee-8883-0afa-6bca0456324e
    • This looks awesome, I will request access via Steam later this afternoon!
    • Personally, I’ve found that it’s usually worth investing in the infrastructure you don’t want to replace later, especially cabling. Running Cat6A (or better, depending on your needs) during an upgrade is relatively inexpensive compared to having to re-cable a few years down the road. For switches I try to balance current specs with realistic growth. If my budget allows it Ill choose switches with higher uplink speeds which leaves room for expanding later on, but I don’t necessarily overspend on access ports if the endpoints won’t benefit from them anytime soon. One lesson I’ve learned is that planning for scalability pays off. It’s much easier to add devices, VLANs, or higher-bandwidth workloads when your network infrastructure already supports it than to replace hardware later.  What is your budget like?
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      539
    2. 2
      +Edouard
      269
    3. 3
      PsYcHoKiLLa
      154
    4. 4
      Steven P.
      99
    5. 5
      macoman
      66
  • Tell a friend

    Love Neowin? Tell a friend!