Recommended Posts

Hello! I've recently bought a new GPU but to my awe I found that I got some unexplainable crashes from it!

I can't seem to figure out the problem, after much testing and configuring - I'm beginning to think it's this individual card that is broken or just doesn't go well at all with my build.

My problem is: After approx. 10-15 min of playing a game my computer freezes and crashes. The sound is stuttering and screen is black. I have tested three games, Guild Wars 2, Far Cry 3 and Minecraft. I do not experience the problem on minecraft, I'm figuring it escapes the problem since it uses Open GL and not DirectX, could be wrong though.

Everything worked fine on my old graphics card.

What I have tried:

  • I have tried to change to a better power supply (to the one I'm currently using in the list)
  • I have tried to under-clock my GPU
  • I have tried to lowering the fan-speed and power usage of the GPU
  • I have tried to install the beta catalyst drivers (12.11)
  • I have tried to make a clean driver install following this guide.
  • The temperature of the card is never exceeding 56 degrees celsius.
  • I only experience a crash when playing a game with DirectX, like guild wars 2 of Far Cry 3.

My old graphics card was a Sapphire Radeon HD 5670, 1GB.

My new graphics card is a Sapphire Radeon HD 7850, 2GB.

My current computer specs is:

Thanks for taking a look! :) If you need any more info I'll be happy to supply it.

There are a few problems with the 7xxx series cards, CCC 12.11 Beta 11 are the best drivers atm but still in Beta so hopefully more fixes will come

From everything I've read, DX9 game give the most problems

Some cards are thought to be faulty by some who also experience crashes, but I say wait until the drivers reach WHQL ,

For now, use the Beta Driver report form on this Beta download page and explain in detail your problem

Also is your motherboard BIOS up to date ?

do a stress test http://www.ozone3d.net/benchmarks/fur/ by what you've explained in your post i'm betting it'll fail, and if it does I'd get the card RMA'd

Ok. I'll try that tomorrow.

There are a few problems with the 7xxx series cards, CCC 12.11 Beta 11 are the best drivers atm but still in Beta so hopefully more fixes will come

From everything I've read, DX9 game give the most problems

Some cards are thought to be faulty by some who also experience crashes, but I say wait until the drivers reach WHQL ,

For now, use the Beta Driver report form on this Beta download page and explain in detail your problem

Also is your motherboard BIOS up to date ?

OK. I'll report my problem tomorrow. And no, i haven't updated my bios since I've bought the motherboard, do you think it might contribute to the problem?

OK. I'll report my problem tomorrow. And no, i haven't updated my bios since I've bought the motherboard, do you think it might contribute to the problem?

It wouldn't hurt to try, BIOS updates generally add support for new hardware, mainly CPUs its never a bad thing to keep it updated

do a stress test http://www.ozone3d.net/benchmarks/fur/ by what you've explained in your post i'm betting it'll fail, and if it does I'd get the card RMA'd

I ran it for 5 minutes and it did not fail.

As I suspected it must be related to DirectX - that benchmark was in OpenGL.

If the stress test ran fine your card isn't failing but probably it's the drivers that are causing the problem.

Remove the current drivers and download the 12.10 from AMD homepage.

Also, I am not sure about this, it just popped into my head but it might have to do something with corrupt directx files aswell, try reinstalling those as well.

Already tried making a clean driver install but it didn't help.

I also thought about that my directX install might be corrupt but it worked fine on my old GPU and wouldn't really explain why I can play a while and then suddenly crash.

There isn't by chance anywhere I can find a log?

Well you can check Event viewer for some information. If it's an directx or driver related crash it usually stores the info there.

My own 6790's had this problem but for me it was that they were overheating too quick but since you ran the stress test it can't really be that and should still be something directx related.

There are also couple of other things that I could think of (If someone thinks I'm wrong please correct me), one thing you can try is to update the Graphics BIOS (If there is any update for it) secondly the PSU seems to be pretty weak, this doesn't consern the gpu a bit but I wouldn't suggest putting 2 different company RAM's in the same build, those might cause other crashes, if all else fails you did you do an clean Windows install after swapping the card? Windows sometimes has a strange way of hooking itself to a specific hardware in your system, don't know why but I've seen it do that.

Well you can check Event viewer for some information. If it's an directx or driver related crash it usually stores the info there.

My own 6790's had this problem but for me it was that they were overheating too quick but since you ran the stress test it can't really be that and should still be something directx related.

There are also couple of other things that I could think of (If someone thinks I'm wrong please correct me), one thing you can try is to update the Graphics BIOS (If there is any update for it) secondly the PSU seems to be pretty weak, this doesn't consern the gpu a bit but I wouldn't suggest putting 2 different company RAM's in the same build, those might cause other crashes, if all else fails you did you do an clean Windows install after swapping the card? Windows sometimes has a strange way of hooking itself to a specific hardware in your system, don't know why but I've seen it do that.

Where do I find the event viewer?

I thought a 500W psu was decent, but it held up during stress test with fan at 56%.

And the problem occurred when I only had one of the rams as well, I was worried when I bought more but I ran a memory test and it seemed to be ok. I bought the 8gb recently and thought it'd be a nice bonus to keep my old as well.

I'll maybe try reinstall the system, I think win8 has a nice way doing this keeping all software and files.

Where do I find the event viewer?

I thought a 500W psu was decent, but it held up during stress test with fan at 56%.

And the problem occurred when I only had one of the rams as well, I was worried when I bought more but I ran a memory test and it seemed to be ok. I bought the 8gb recently and thought it'd be a nice bonus to keep my old as well.

I'll maybe try reinstall the system, I think win8 has a nice way doing this keeping all software and files.

Pull the new memory out. You need to start eliminating variables in order to narrow down the problem.

I'm very dubious about that power supply.

Edit : Actually i'm surprised nobody has pointed it out. I'd try and get a hold of a decent (reads: "Known brand") power supply and try it.

The brand I have is well know here in Sweden and have to my experience been very good.

I thought the power supply was my problem at first (which did not have nearly the same output wattage as this one have) and therefore changed to this - it was the first thing I tried (my old power supply was a corsair, I think). Turned out my problem wasn't the power supply, the crash did still occur.

Also the PSU can't be the problem since it didn't crash when I did the OpenGL stress test, which forced the fan of the GPU go very fast.

This topic is now closed to further replies.
  • Posts

    • Simple answer is yes, you will still get the Windows updates and as long as browser is up to date, you will be good. Only thing secure boot does is protect you against boot level threats and make it harder to install other OS's. I've been looking into this pretty thoroughly lately myself as wifes computer has secure boot disabled plus my other, older computers that run Linux, don't have secure boot enabled. Have seen all kinds of questions about this on the Linux Mint and MX Linux forums. Just don't suddenly enable secure boot now.
    • How many other companies will follow Ford's lead? Or, have they already gotten lazy and become enslaved to AI--and now can't figure out how to get out of that mess.
    • Why would any self-respecting intelligent person follow any recommendation by Donald's GOP administration? With almost two years of fabrications, deceit, and blatantly illegal behavior, why believe them now? They had best be gone after the November 2026 election, so we'll wait and see.
    • AltSendme 0.4.1 by Razvan Serea AltSendme is a minimal, cross-platform application designed for fast, secure, and private peer-to-peer file transfers. It allows users to send files or entire directories directly between devices without relying on cloud servers, accounts, or any personal information. Everything is encrypted end-to-end using modern protocols like QUIC and TLS 1.3, ensuring both strong security and low-latency performance. Transfers are verified with BLAKE3 for data integrity, and interrupted downloads automatically resume, making the experience reliable even on unstable connections. You can transfer anything—images, videos, documents, and more. Integrity checks are performed on both ends, so your files are automatically verified for correctness during both sending and receiving. AltSendme works seamlessly across local networks or long-distance links, capable of saturating multi-gigabit connections for extremely fast delivery. With built-in NAT traversal and encrypted relay fallback, it connects devices almost anywhere. The app integrates with the Sendme CLI and will soon support mobile and web platforms. Fully free and open-source, AltSendme offers a lightweight, privacy-first alternative to traditional cloud-based services, removing size limits, upload costs, and unnecessary data exposure. AltSendme 0.4.1 changelog: Release Highlights Self-hosted relays: Run your own iroh relay so transfers don't rely on public infrastructure. Includes a full deployment template in deploy/relay/ with Docker Compose for a VPS and configuration examples for production use. Fly.io support: One-click deploy template for Fly.io, including a quick-start config (fly.dev.toml) for testing without a custom domain, plus production setup with Let's Encrypt and your own hostname. Relay settings UI: New Settings → Network panel to choose how AltSendme connects: automatic public relays, custom self-hosted URLs (with optional auth token), or disabled. Test connections, verify latency, and see live relay status in the footer. Disable relays: Turn off relay servers entirely when you only need same-network transfers (e.g. LAN). Direct connections only. No relay hop required when devices can reach each other. Android graduates from beta: Android is now part of the regular release cycle alongside desktop. APKs ship with each version (universal, arm64, and armv7). Other improvements Private relay access control via shared auth token Relay fallback notifications when a custom relay is unreachable Broadcast mode toggle in sharing settings Android release build fixes (split-per-ABI APKs, universal APK preservation) UI polish: mobile safe-area insets, dropzone layout, transfer progress animation Bug fixes for minification-related serialization issues and system tray icon loading What's Changed feat(relay): add relay status functionality and settings UI (a120cdf) feat(relay): implement custom relay server configuration and verification (51276c7) feat(relay): add configuration for private relay access and enhance observability features (48fbabf) feat(relay): enhance relay URL validation, display connection status (d4fffa0) feat(relay): add RelayChangeGuard component and enhance relay-related translations (16ba514) feat(broadcast): add toggle setting for broadcast mode in sharing UI (ca6d977) fix(relay): correct QUIC discovery port, pin image, templatize fly.dev (52a2ba5) fix: More broken serialization due to minification (67491a9) fix(android): preserve true universal APK across per-ABI builds (e9f256f) fix(ui): conditional safe-area insets padding on mobile (1182f0e) refactor(transfer): CircularRing component animation fix (944572b) chore(android): drop x86 and x86_64 release APKs, keep universal+arm64+armv7 (34ada0b) Download: AltSendme 0.4.1 | ARM64 | ~9.0 MB (Open Source) Download: AltSendme for MacOS | Android Links: AltSendme Home Page | GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • You are mostly right about the ephemeral nature of it. As I mention in the article, if you dont add a second device or take a backup of your account before uninstalling it, then yes you will lose access to your account. That said, in terms of actual user experience when you sync multiple devices your message history carries across and there's also a Saved Messages chat like there is on Telegram to send messages and attachments between your installs. But yh, what you point out are correct and its not trying to emulate Messenger or Telegram.
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      495
    2. 2
      +Edouard
      225
    3. 3
      PsYcHoKiLLa
      150
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!