Issue with formatting a secondary drive in Windows 8


Recommended Posts

Hi all,

i'm having a small issue with formatting a secondary drive in Windows 8.

I have been experiencing sluggish performance with this drive which was being used as a software backup, I backed up all the data on the drive a proceeded to format the drive in computer management, but the drive in question is listed as a system partition and won't let me format it for obvious reasons.

I no idea why a secondary drive has been selected as the system partition, what I would like to know is there a way to move the system partition or do I have to reinstall Windows 8.

As you can see from the screenshot, the F drive is shown as System (Active) this is the drive I cannot format

post-149938-0-15539900-1357756091.png

If that drive is set as 1st disk (Disk 0 ) in the BIOS / SATA port, then no matter which drive you install windows on, it will always use disk 0 for the MBR

No, My primary drive is on the 1st SATA port and always has been, there is no way to configure the drive in the bios other than choosing which device boots first which was my Blu-Ray drive then my primary HDD.

No, My primary drive is on the 1st SATA port and always has been, there is no way to configure the drive in the bios other than choosing which device boots first which was my Blu-Ray drive then my primary HDD.

I would physically unplug it from the board and see if you can boot

If you can. just use disk management to delete the partition and format the drive

I would physically unplug it from the board and see if you can boot

If you can. just use disk management to delete the partition and format the drive

I can't use disk management to format the drive, when I attempt to do this it says "Windows cannot format the system partition on this disk"

You can use Diskpart to do it.

1. Type "diskpart" on the Start screen, then right-click it in the results and run it as an administrator.

2. Type "list disk" to get a list of the drives on your system, then find the one you want to erase. (Double-check this!)

3. Type "select disk X" where X is the drive number from the previous command output.

4. Double-check TWICE that you selected the right drive as Diskpart will not ask for confirmations.

5. Type "list partition" and verify again it's the right drive.

6. Repeat step 4. :)

7. Type "clean"

This will wipe all the partition information from the drive and you should be able to partition and format it in Disk Management.

You might want to switch to the proper disk before step 5 and use the "active" command to mark it so.

With your primary system partition showing as F it is possible you may find your system in an unbootable state so make sure you have a way to recover if necessary.

"You have to delete the partition before formatting"

what?? You format a partition, you can not format a non partitioned disk.

Now he may will delete the partition, and then just create a new one and then format that. But your wording is odd if that was what you meant to say.

Follow greywolf instructions and you should be good.

"You have to delete the partition before formatting"

what?? You format a partition, you can not format a non partitioned disk.

Now he may will delete the partition, and then just create a new one and then format that. But your wording is odd if that was what you meant to say.

Follow greywolf instructions and you should be good.

Yea, well he is saying he can't format the system partition, so he would have to delete it first if it won't let him format it, and yea then make a new one

Yea I see what you are saying, if he deleted it he would have no need to format it after creating a new one - should have excluded the formatting thing and just left "You need to delete the partition"

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Instagram just got "a long-requested feature" by Hamid Ganji Instagram has finally added a new feature that has been "long-requested" and it allows users to write an individual caption for each image or video in a carousel. The feature will start rolling out this week, and it’ll be available to all users. Previously, Instagram only allowed a single caption for all regular posts and carousels. This made it harder for content creators to describe every scene in a carousel and often forced them to write longer captions. However, with this new feature, every slide in a carousel can have its own caption, which can be viewed by swiping left or right. To use the feature, when writing a caption for your post, select “Multiple captions” from the dropdown menu in the caption area. You can then write unique captions for each slide. By swiping through the carousel and selecting individual slides, a dedicated space for writing captions will appear. Instagram says the feature will help audiences get the right context at the right moment. The ability to assign a unique caption to each slide in a carousel could be particularly useful for content creators and brands on the platform. Instagram says the feature will begin rolling out this week. The new feature appears to have been well received by Instagram users, many of whom have been requesting it for a long time. However, users are now asking for additional features, such as the ability to add new slides to a carousel after it has been published. Instagram has been introducing several useful features lately, but users who want access to additional tools and perks can subscribe to the platform’s Instagram Plus offering. Priced at $3.99 per month, Instagram Plus includes exclusive features such as 48-hour Stories, more detailed post analytics, and the ability to tailor posts or Stories to specific audiences. The subscription includes 11 new features in total.
    • "Learning" and "starting" are fine uses of AI. The moment that crap falls into the final game? Lost a sale from me.
    • Don't worry, the majority of its members still suffer from heavy TDS, so these White House simping posts will continue being few and far between.
    • If you're using a webcam for Zoom calls, then any 720p or 1080p cam will do. If on the other hand you want high quality video for streaming or recording, then consider using a DSLR or mirrorless camera, because 99% of 4k webcams will have a tough time achieving same results.
  • Recent Achievements

    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
    • One Month Later
      eurospharma62 earned a badge
      One Month Later
    • Week One Done
      With What earned a badge
      Week One Done
    • Week One Done
      Harris Gilbert earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      581
    2. 2
      +Edouard
      169
    3. 3
      PsYcHoKiLLa
      73
    4. 4
      Michael Scrip
      66
    5. 5
      ATLien_0
      64
  • Tell a friend

    Love Neowin? Tell a friend!