Rebuild compatibility


Recommended Posts

Hey all,

I'm looking to rebuild my system and I've noticed newegg has some good deals right now on things i've been looking at.

RAM:

http://www.newegg.co...N82E16820233186

Video Card:

http://www.newegg.com/Product/Product.aspx?Item=N82E16814150656

CPU:

http://www.newegg.co...N82E16819103960

I'm also looking at this motherboard:

http://www.newegg.co...N82E16813130657

My case is a micro-atx case, so I'm some what limited unless I get a new case, but I'd like to avoid that.

I was hoping to get a mobo that supports atleast that speed of ram (preferably without overclocking) and has usb 3.0 but I am having a hard time finding one.

Does anyone see any problems with this components? Anyone have any suggestions on a motherboard?

Thanks,

HC

Link to comment
https://www.neowin.net/forum/topic/1131296-rebuild-compatibility/
Share on other sites

That MSI board is fine. I've used MSI before and they run nice. Looks like you have a decent set of components. They should all be compatible, however I would look up the MSI board on MSI's website and ensure compatibility with the memory and CPU you're planning to get. What is your main intended use for this system? If it's gaming, then an AMD FX will do just as well as an i5 or i7 + or - a few fps here or there.

I'm not sure why those links aren't working for some of you, so i'll just list out the pieces below.

CPU: AMD FX-8150

RAM: Corsair vengeance 2x4gb 1600

VGA: XFX radeon 7850 1gb

PSU: CORSAIR Builder Series CX600 600W

Case: Antec Mini P180 Black Steel

I found this mobo as well.

http://www.asrock.co...=Specifications

I didn't realize MSI was so crummy.

My budget isn't real large, so I'm trying to keep it around $400-$450, but I'm still open to suggestions.

No SATA 3 on that MSI board and not a lot of good AMD Micro ATX layouts to go for.

This would be the best layout but no SATA 3.

http://www.newegg.co...N82E16813128565

I agree that not having SATA 3 could be a bummer. It could be bad if you wanted to upgrade to an SSD at some point in the future. I've been out of the hardware game for only a few months, but man has the micro-ATX market diminished!

@HouseCookie, that mobo you mentioned doesn't have USB3 as you requested :)

May I ask why you want the ddr1600? Would you notice any real world speed improvements? Or is it because it's in a sale?

I found a motherboard with SATA 6Gb/s and USB 3 with DDR1333 support - SATA6 is good, has USB3 but no DDR1600 support

Or your one you listed in the OP SATA 3Gb/s and USB2 with DDR1600 support - SATA3 is bad (if wanting ssd in future), has USB2 but a PCIe card can fix that, and has DDR1600 support

Or... you could get an ATX case and a new ATX motherboard :p

Yeah I was going to add that almost all RAM, at least to my knowledge, is natively 1333MHz. The 1600MHz sets are just tested and rated to run at 1600MHz, and therefore using it at that speed is overclocking. Someone correct me if I am wrong.

You are right, it doesn't. I like your suggestion about an additional card. I'm having a hard time finding a mobo that has usb 3.0 and supports ddr3 1600 :/

AMD CPU may or may not run at that ram speed they list here as Supports up to DDR3-18662 but the 2 then reads.

"1866 supported with 1 DPC (DIMM per Channel) in single memory slot motherboard designs"

http://www.amd.com/u...l-features.aspx

The modo I listed listed above does have USB 3 but not SATA 3 and this one has both if you can get it but some of the SATA ports may be blocked if the GPU card is too long.

http://www.gigabyte....spx?pid=3817#ov

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Read this in Humor Simpson 's voice, "Out of my way Moe".
    • You still can, its just under the Transform flyout for WordArt now
    • Likely nothing will be done in corporate America, there have been countless Tesla self-driving incidents. Then again, there have also been countless human operated incidents. It's literally daily news here in Canada, to the extent that it's now odd if we get a day where a collision doesn't get announced on the radio throughout the day...
    • SKG Hand Massager with Heat OS500 hands on by Steven Parker I was offered the chance to test out the SKG Hand Massager with Heat OS500, and full disclosure, they let me keep it regardless of my findings. Anyway, I jumped at the chance due to my long hours sitting at my desk, mousing around. Apologies for the knife cut across the top of the box; that was my doing, being a bit too heavy-handed with opening up the outer packaging. First up, what's in the box: SKG Hand Massager with Heat OS500 1x Type-C charging cable User Manual 1-Year Warranty (card) In short, everything you need to get started. According to the official Amazon listing, here are the key features: Full-Hand Air Compression: OS500 wraps your fingers, palm, and wrist with multi-chamber air compression for a complete hand relaxation experience. The extended massage chamber helps cover more of the hand and wrist area than standard palm-only hand massagers Palm Kneading with 6 Modes & 6 Intensities: Built-in palm kneading rollers add a hands-on massage feel, while 6 preset modes and 6 pressure levels let you choose the comfort level that fits your day—from gentle relaxation to a firmer full-hand massage 3 Heat Levels with Cooling Fan: Choose from 104°F, 113°F or 122°F warmth to suit different seasons and comfort preferences. The built-in cooling fan helps reduce stuffiness during heated sessions, keeping your hand feeling fresh and comfortable Easy Visual Display & Smart Timer: The digital image display clearly shows massage area, mode, intensity, heat level, and remaining time at a glance. Select 10, 15, or 20-minute sessions for quick office breaks, evening relaxation, or everyday hand care Rechargeable, Cordless & Comfortable: A 3000mAh battery supports over 90 minutes of full-function use on a full charge, with convenient USB-C charging. The soft inner lining, smooth ABS/PU finish, and premium black-gold design make OS500 ideal for home, office, or gifting With all that out of the way, here are my own findings. I gave it a try on both left and right hands, and as you can maybe see from the above YouTube Short, (sorry for the shaky video), my whole hand fits in, but my wrist barely enters the Hand Massager. I was able to push through a bit more with my fingertips extending out the other end to get a bit of massaging on the start of my wrist. Usage For some reason, there is a strap that is very difficult to fasten to my wrist with one hand. I am not sure what function it has, and it isn't mentioned in the user manual. The only thing I could find was in the product images that claimed "wrist precision". Unlike the Bob and Brad Hand Massager, this device does not massage the wrist anyway, even though a "wrist mode" is mentioned, which must be for smaller hands than I have, as it is mainly intended for the hand and fingers. In addition, for its steeper price, there are no disposable gloves provided in the box, which is a bit of an issue considering the internal cover (which appears to be elasticated nylon) cannot be removed for washing; so you are left with only one choice: always thoroughly wash your hands before using it. I can imagine this thing getting a bit grimy after a period of use, and that is a bit of a shame. With that said, the buttons on the device, from left to right, do the following: Heat button: 3-level heat control at 104°F, 113°F, or 122°F Mode button: Auto mode Circular mode Soothing mode Relax mode Palm and fingers mode Palm and wrist mode Intensity button: from (First-time users) 15Ka, 25Ka, 35Ka, 45Ka, 55Ka, 60Ka (Intensive relief) Knead button: on or off (6 pressure levels) Power button: Long-press to turn on or off Cooling button: turn on or off the cooling fan Also, in the product imagery, it states there are 36 "custom modes," but nowhere is it listed what these modes are. I can only imagine that they mean a combination of all of the above settings in different intensity levels. The device itself seems to rely on a single "kneading" mechanism located at the palm area of the hand, which spins when in use, and the other massage features are mainly utilized through the air sacs, increasing and decreasing at various levels on the hand and fingers. I am not sure it offered too much relief for someone who is typing and operating a mouse for hours at a time; further testing may be required. It does feel nice, though. Finally, you may be wondering how this fits into the scope of a tech website? Well, let me tell you something: sometimes I sit for up to 15 hours working on Neowin, and although I take breaks in between, it takes a toll on my body. I think in the immediate absence of a partner to apply relief, a good massager like this Hand Massager can shed the strains of the day in just a couple of 15-minute bursts. On the official website, this has an MSRP of $99.99, but luckily for our readers, it is selling at $10 off for just $89.99 right now on Amazon. SKG Hand Massager with Heat OS500 for $89.99 (with $10 off coupon), $99.99 MSRP For me, this gets a thumbs hands(?) down. However, it could be improved by making it so that the protective covering could be removed and thrown into the washing machine, or get yourself some disposable gloves to use with it. As an Amazon Associate, we earn from qualifying purchases.
    • Thanks for the info, but I'm still not sure if I need this....
  • Recent Achievements

    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
    • First Post
      DrWankel earned a badge
      First Post
    • Reacting Well
      DrWankel earned a badge
      Reacting Well
    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      505
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      86
    4. 4
      Michael Scrip
      78
    5. 5
      Steven P.
      76
  • Tell a friend

    Love Neowin? Tell a friend!