• 0

Fedora 18 screwed pc (HELP!)


Question

So I never use any linix distros because I really don't like unix but a friend of mine asked me to download a copy of Fedora 18 and put the live cd version on a USB key.

I copied it using a program Unet something as I found on youtube. After rebooting to try it out my motherboard won't post anymore

P8P67 PRO

I've rebooted, shut down, reset the jumpers

Now I'm a bit ****ed how this happened?

Link to comment
https://www.neowin.net/forum/topic/1131354-fedora-18-screwed-pc-help/
Share on other sites

16 answers to this question

Recommended Posts

  • 0

So now a nice bright RED light is on the motherboard so something died kinda great it was working amazing up till I tried this POS.

Well seems like its the boot device LED that went off.

Known issue on the p8p67 PRO motherboards from what I read.

  • 0

So now a nice bright RED light is on the motherboard so something died kinda great it was working amazing up till I tried this POS.

Well seems like its the boot device LED that went off.

Known issue on the p8p67 PRO motherboards from what I read.

Unplug the computer from the power outlet and reset the BIOS either by using a jumper (look in you mobo's manual) or removing the battery for a few secons. Also try to power on the computer without the USB drive you prepared with Fedora.

If it posts and you can access the BIOS, see if ASUS has an update for it and update it.

  • 0

yeah defo not the fault of the download or Unetbootin, unless you told it to overwrite and install the image on the hard drive instead of the usb, i suppose that could stop your boot

  • 0

Seems someone else had the issue too over here: http://forums.overcl....php?p=14923555

What graphics card do you have?

(Once working again) I recommend using this instead (for making bootable Linux USB disks): http://www.pendrivel...-easy-as-1-2-3/ I have been for over a year, and it's brilliant. Also, try KNOPPIX (http://distrowatch.c...ibution=knoppix - preferably the DVD version) instead of Fedora. Using KNOPPIX is one of the best ways to start learning about/play around with Linux, because all the software is already there installed and configured for you.

  • 0

Seems someone else had the issue too over here: http://forums.overcl....php?p=14923555

What graphics card do you have?

(Once working again) I recommend using this instead (for making bootable Linux USB disks): http://www.pendrivel...-easy-as-1-2-3/ I have been for over a year, and it's brilliant. Also, try KNOPPIX (http://distrowatch.c...ibution=knoppix - preferably the DVD version) instead of Fedora. Using KNOPPIX is one of the best ways to start learning about/play around with Linux, because all the software is already there installed and configured for you.

Least he can get things going, me its dead in the water.

The device light is on I did pretty much everything to resolve it but its dead.

Gonna have to RMA and never touch linux again lol

Really ****ed off through didn't need this (so much work to do)

Anyways, new topic, recommend me a new motherboard that works with my specs other then Asus.

I always go with Asus boards and need a change. Price isn't an issue.

  • 0
  • 0

More of an underlying hardware issue - the software is a red herring.

I had to look up "red herring" on Urban Dictionary to understand what you meant: http://www.urbandictionary.com/define.php?term=red%20herring :laugh:

  • 0

Searching for "P8P67 pro recall" in Google comes up with info about a motherboard recall. Not good.

Here's more reading you can do about people having similar issues:

http://hardforum.com...d.php?t=1581590

http://hardforum.com...d.php?t=1633885

http://hardforum.com...d.php?t=1581490

http://hardforum.com...d.php?t=1580896

http://hardforum.com...d.php?t=1576509

My board was one of the ones that they fixed with the B3 stepping

so not exactly the same issue as those but thanks.

The board is going to have to be RMA'ed just really ticked off that it went like that since it was fine until I tried to put linux on a thumb drive.

Still looking for suggestions on another motherboard that will be good for what I already have.

So far i'm looking at MSI Z77A-GD55 and the GD65 series.

  • 0

Least he can get things going, me its dead in the water.

The device light is on I did pretty much everything to resolve it but its dead.

Gonna have to RMA and never touch linux again lol

Really ****ed off through didn't need this (so much work to do)

Anyways, new topic, recommend me a new motherboard that works with my specs other then Asus.

I always go with Asus boards and need a change. Price isn't an issue.

once again, it definitely wasn't linux or the unetbootin that caused the issue. just some really coincidental timing

but either way, it sucks and I hope your new mobo works out :)

  • 0

Lol @ blaming linux.

Anyways, my PC was doing this a couple nights ago. Wouldn't post and sat with a red light on. I unplugged it and cleaned the crap out of it (lots of dust). I re-applied some thermal paste as I figured it might of been heat problems. I put it all back together, and it took a bit for it to post the first time, however now it is running butter smooth, and am seeing quite the preformance increase just from the actions I took to clean it and cool it.

  • 0

I got a new motherboard and it did the samething turns out the SSD I have died. Fun fun, took the motherboard with it, it seems.

Lol @ blaming linux.

Anyways, my PC was doing this a couple nights ago. Wouldn't post and sat with a red light on. I unplugged it and cleaned the crap out of it (lots of dust). I re-applied some thermal paste as I figured it might of been heat problems. I put it all back together, and it took a bit for it to post the first time, however now it is running butter smooth, and am seeing quite the preformance increase just from the actions I took to clean it and cool it.

Yeah in my case everything is new, I always clean it every 2-3 weeks for dust so its spotless.

It was just an ill timed death of my SSD but I'm still scared to try my USB boot device, not in the mood to kill another pc.

Maybe I'll try it on my work laptop lol

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Payday TWO!! Is 13 years old man I feel old - I remember trying it out and if I did not know I would say 5-6 years ago or something
    • Payday 2 engine upgrade adds 64-bit and DX11 support, drastically shrinks install size by Pulasthi Ariyasinghe Payday 2, the most popular entry in the heisting game franchise, is getting a surprising update after all these years. This is slated to be a complete engine upgrade that will enhance almost every aspect of the 13-year-old title, targeting performance, loading times, file size, rendering backend, and more. Developer Sidetrack Games is planning a beta to test out the new version ahead of the full public launch. The development team today revealed that the long-awaited upgrade to the 64-bit architecture is happening with this Diesel 3.0 engine update. By letting the game use more ram than 4GB, it is said to improve stability and compatibility on most hardware. It should also help modders in the long term with implementing larger changes too. "While many of the changes are made on the backend and not everything will be visible to you guys because it is a massive rewrite of the entire codebase, there will be a lot of things that you can look forward to," Sidetrack explained. Payday 2 will also hop over from DirectX 9 to 11. Instead of visual improvements, this is slated to reduce the amount of VRAM used by the title, letting more lower-end hardware access the title and run it better. Since these changes would require a complete redownload of the game anyway, Sidetrack says it has revamped "the game's packaging and bundling system." This should reduce the installation size from 86GB to 32GB. "So, now it's time to finally move the game to your SSDs," added the studio. The Payday 2 Diesel Engine 3.0 update is entering open beta on June 30 for Steam users. No console release plans were announced today. Sidetrack Games says it has been working on this complete rewrite of the codebase for the last nine months. While these changes should break most mods, the studio encouraged modders to use the beta period to repair their creations with support from the development team.
  • Recent Achievements

    • Week One Done
      Scoobystu earned a badge
      Week One Done
    • Week One Done
      tuben earned a badge
      Week One Done
    • First Post
      OffsetAbs earned a badge
      First Post
    • Reacting Well
      OffsetAbs earned a badge
      Reacting Well
    • First Post
      Kolakid60 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      440
    2. 2
      +Edouard
      194
    3. 3
      PsYcHoKiLLa
      157
    4. 4
      FloatingFatMan
      71
    5. 5
      Steven P.
      68
  • Tell a friend

    Love Neowin? Tell a friend!