Reinstalling Windows with seperate RAID 5 Array


Recommended Posts

Hi all,

I'm in need of little help here as I'm not entirely comfortable with RAID arrays and their foibles.

Currently in my desktop I have:

1x OCZ Vertex 2

5x Samsung 1TB drivers running in RAID5 controlled by:

ASUS P67 Rev 3.1

The Vertex 2 was used as a C drive, with al programs etc running off of it, and the RAID array being used for general storage use.

My Vertex 2 has just totally died, and I've got a Samsung 840 Pro to replace it with.

However I'm wondering what steps I should take when reinstalling the OS?

Should I disconnect the RAID array? Disable it in BIOS and re-enable it after I'm done installing Windows 8 onto the 840?

And finally, I'm assuming that all of my data on the RAID array is still there and secure? My top priority is of course maintaining that data!

Thanks for any help you can offer, I'm happy to provide any more info you may need.

Cheers.

Windows shouldn't touch the array as far as I know? Once the driver loads it should detect there is an existing filesystem on there and do nothing with it.

My guess based on the size variances between the RAID and the "C Drive" - The OS is not configured to be hot swappable and thus re-installing as long as the RAID is running within the same setup - everything should be fine.

Of-course, IF this is not a production enviroment - You could do as you described and simple disable the RAID. Might be over-kill but it is a sure-fire way of making sure nothing happens to the data.

So far I have done nothing regarding install, the 840 is in, and I'm ready to go but a bit worried by these conflicting answers!

Will having them unplugged have any negative effect?

Also, should I have SATA mode set to AHCI or RAID in my BIOS, it was previously set to RAID.

My two options as far as I can tell:

1. SATA Mode to RAID, all drives connected and fresh install on to the 840, or

2. SATA Mode to RAID, RAID array disconnected, and then plugged back in after install.

My priority is protecting the data on the RAID array, formatting and playing around with the C drive is of course now of no concern to me.

I'll be installing Win 8 64 Pro, the same OS as was on there prior to failure, with no other hardware changes.

Thanks for the help so far everyone!

Also, the RAID array is hardware controlled, not software.

Like so:

Unplug the power on the RAID array.

Install Windows. Get into Windows and fully set up.

Power down, replug the power for the RAID array.

Power up, enjoy your raid.

Even if I am wrong (and I'm not) this is the safest way to do it, and if anyone has objections to this idea other than it's a waste of time, feel free to pipe up.

I lost a RAID array to the issue I described. I made a topic on this forum, but I can't find it (might have been trimmed?). I lost my Windows install to a USB3 driver issue that corrupted the install. Reinstalled with the RAID array driver present. It read my disks, and then overwrote parts of the drive setting up an install (due to not finding a file system). Just like what we are talking about here.

I'm legitimately asking people to pipe up if I am wrong.

2. SATA Mode to RAID, RAID array disconnected, and then plugged back in after install.

That will work and you can also make sure the SATA ports are connected back in the same order but thats not really important for a working array.

Disconnecting the array first because installing the OS on another drive with SATA set to RAID insures windows don't installs the OS boot on the array with windows on the other drive.

Excellent, all done following articuno's instructions, here's my steps so far:

Unplugged all drives.

Installed Win 8 with just the SSD connected, fully updated through Windows Update, and installed all drivers etc from the ASUS download page

Replugged all drives in exactly the same order, booted into Intel RST and seen the following: http://i.imgur.com/inf769z.jpg Which all looks good, so my data is still sat there.

However when I boot into Windows I do not see the array as a drive, and neither do I see the disks in Device Manager, is there something I need to do for Windows to 'Discover' them?

if the data on the array is life and death data, disconnect them while installing windows, reboot, enable the array/controller and let W8 load up drivers for the new controller/raid array and off you go.

I leave my RAID0 array enabled any time I reformat, but its just game data n cache, user files are on my NAS.

in device manager, do you see the RAID controller? if not re-run Scan for hardware changes from the Action menu.

you should see something similar to below (but 5 RAID5 devices)

devmgr.jpg

Excellent, all done following articuno's instructions, here's my steps so far:

Unplugged all drives.

Installed Win 8 with just the SSD connected, fully updated through Windows Update, and installed all drivers etc from the ASUS download page

Replugged all drives in exactly the same order, booted into Intel RST and seen the following: http://i.imgur.com/inf769z.jpg Which all looks good, so my data is still sat there.

However when I boot into Windows I do not see the array as a drive, and neither do I see the disks in Device Manager, is there something I need to do for Windows to 'Discover' them?

Excellent, all done following articuno's instructions, here's my steps so far:

Unplugged all drives.

Installed Win 8 with just the SSD connected, fully updated through Windows Update, and installed all drivers etc from the ASUS download page

Replugged all drives in exactly the same order, booted into Intel RST and seen the following: http://i.imgur.com/inf769z.jpg Which all looks good, so my data is still sat there.

However when I boot into Windows I do not see the array as a drive, and neither do I see the disks in Device Manager, is there something I need to do for Windows to 'Discover' them?

Go into Disk Manager and see if they are there, they might be 'offline' or need a drive letter assigning to the array.

if the data on the array is life and death data, disconnect them while installing windows, reboot, enable the array/controller and let W8 load up drivers for the new controller/raid array and off you go.

I leave my RAID0 array enabled any time I reformat, but its just game data n cache, user files are on my NAS.

People don't really need to do this, he could of easily just left the driver part out of it and installed Windows 8 to the new SSD then installed the drivers. As long as he isn't booting off the RAID array itself, it's fine. You only need to install the drivers during setup if your going to install to the array itself.

Go into Disk Manager and see if they are there, they might be 'offline' or need a drive letter assigning to the array.

People don't really need to do this, he could of easily just left the driver part out of it and installed Windows 8 to the new SSD then installed the drivers. As long as he isn't booting off the RAID array itself, it's fine. You only need to install the drivers during setup if your going to install to the array itself.

Sorry should have been a bit more precise, I didn't mean in windows install start up, I meant if he had controller disabled in bios before installing W8. Once W8 was fully installed and he rebooted n enabled it.

I personally would have left it all enabled and let W8 setup see it in initial install time, what I always do on my own rig and exactly what I do with LUN mapped drives on SAN arrays presented as RAID volumes on rebuilds of servers. Never been an issue yet.

the raid config data is held and owned by the controller, same with the volumes in the raid container, windows will read it form that and not mess it up.

Indeed, I didn't install any drivers during Win 8 installation, allowed it to do it's regular thing seeing as I only had the one drive enabled.

I have the latest Intel RAID drivers installed, and also the latest Marvell SASA controller drivers, I'm a bit perplexed as to why it's not just appearing as I had anticipated!

(This is my first build using RAID in case you couldn't guess :p)

Indeed, in BIOS I see the 5 separate individual drives, in Intel RST I see the complete array, is there another time during boot I should see the array listed?

Here are the only two screens I see during the actual boot process:

http://i.imgur.com/OxysUeV.jpg

http://i.imgur.com/ySBdKxW.jpg

"Unplugged all drives.

Installed Win 8 with just the SSD connected"

So you booted the computer and powered on the array controller with ALL the drives unplugged - don't you think the array controller might notice that it booted up and all its disk were offline? I am quite sure it would mark them OFFLINE when that happens, and your array is not valid any longer.

Now you should be able to go into the controller and get them back online again.. But there would of been no freaking reason to unplug them in the first place.. You might do that with single drives if you your not sure you could tell which one is which on an install. But I would be pretty sure you could tell the difference between a SSD and a raid 5 array to which one you wanted to install too.

Good luck - its quite possible you blew up the array when you unplug all its drive and then boot the controller -- what do you think its going to think happened to its disks??

  • Like 1

I doubt it blew up lol - you might of meant this as a dramatic way of saying uninitialized. It can take quite some time for the re-initialization process to complete. If I pull a hot swappable disk on one of the older units - it could take up to 3 hours before the new one is back online. A flashing light indicates the drives status.

The controller should be able to re-init off of the disks based on the fact it's identified them as being disk members.

It ought just read the damn thing in theory. I've done it before with Intel controllers.

At the very worst it might require a resync.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Helium Browser 0.13.4.1 by Razvan Serea Helium is a private, fast, and honest Chromium-based web browser — built for people, with love. It offers the best privacy by default, unbiased ad-blocking, and a clean experience free from bloat and noise. Proudly based on Ungoogled-Chromium, Helium removes Google’s clutter while keeping a fast, efficient development pipeline. With thoughtful touches like native !bangs and split view, Helium is a people-first, fully open-source browser that puts control back in your hands. Privacy, security, and control come first. Ads, trackers, and third-party cookies are blocked automatically, HTTPS is enforced everywhere, and all Chromium extensions work seamlessly — while Google can’t track your activity. Helium’s 13,000+ offline-ready !bangs let you jump straight to sites or AI tools like ChatGPT instantly. Open-source, people-first, and unbiased, Helium delivers a browsing experience that’s fast, secure, and free from noise, ads, and compromises. Helium Browser key features: Performance Fast, efficient, and lightweight — built on Chromium’s optimized engine. Energy-saving and consistent — stays fast over time without slowing down. No bloat — stripped of unnecessary components for maximum speed. Minimalist interface — compact, clean, and distraction-free. Customizable toolbar — hide elements you don’t need. Smooth and stable — no flicker, lag, or animation glitches. Comfort-focused experience — intuitive and unobtrusive. Privacy & Security Best privacy by default — blocks ads, trackers, phishing, and third-party cookies. Unbiased ad-blocking — powered by community filters and uBlock Origin. No telemetry or analytics — zero background web requests on first launch. Strict HTTPS enforcement — warns for insecure sites. Passkeys supported — modern authentication made simple. No built-in password manager or cloud sync — your data stays yours. Extension Compatibility Full Chromium extension support — including MV2 extensions. Anonymized Chrome Web Store requests — Google can’t track extension installs. Extended MV2 support — maintained for as long as possible. Smart Features Native !bangs — browse faster using 13,000+ offline-ready shortcuts. AI integration — use !chatgpt and others directly from the address bar. Offline functionality — bangs work without an Internet connection. Philosophy People-first design — open source, transparent, and community-driven. No ads, no noise, no bias — privacy and honesty over profit. Helium Browser 0.13.4.1 changelog: 0a4f1149 revision: bump to 4 (#1969) 4848de1f helium/core: enable the chromium screenshot feature (#1968) e0dec3f5 onboarding: integrate strings to i18n system (#1948) 417fa5bc i18n: fix newline parsing for onboarding 7a339b39 i18n: add foraged translations for onboarding 4f090cff i18n/generate: add handling for onboarding strings bfe48d58 i18n_apply: manually override parent grd logic for onboarding strings ab214e3c onboarding: bump in deps, wire up grdp afa6a059 helium/core: disable pdf infobar feature (#1965) eba585e7 helium/ui/vertical: fix new tab button alignment and icon size (#1964) 6ecfc9e0 helium/ui/tabs: fix horizontal tab hover background color (#1963) 3db87dc0 helium/ui/tabs: fix new tab button hover/press colors (#1962) 6bbdcc3e helium/ui: improve tab group UI in all layouts (#1961) 53deb314 helium/ui/tabs: enable tab group hover cards e93aece7 helium/ui/vertical: fix tab group appearance, prevent line overlap 629f5495 helium/ui/tabs: restore solid group header colors, enable new colors 961c962e helium/ui/tabs: move horiz tab group underline to bottom, make it thick c96deab6 merge: update to chromium 149.0.7827.155 (#1959) 36db56b4 i18n: update source.gen.json 5ce006ae patches: refresh for chromium 149.0.7827.155 b4c1ea62 merge: update ungoogled-chromium to 149.0.7827.155 4e5e8671 Update to Chromium 149.0.7827.155 08a3e7da helium/ui/layout: disable mute on collapsed vertical tabs (#1778) a0a5bbaf helium/core: simplify context menu and prevent huge widths (#1951) c4732aac devutils/i18n: add forage command (#1944) 11d16986 devutils/i18n: add an option to translate using local CLI tools (#1942) d820c3a2 i18n/prompt: tighten translation rules to prevent common errors (#1940) cf827007 Update to Chromium 149.0.7827.114 6e3d5164 Update to Chromium 149.0.7827.102 Download: Helium 64-bit | Portable 64-bit |~100.0 MB (Open Source) Download: Helium ARM64 | Portable ARM64 Links: Helium Home Page | macOS | Linux | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Glow 26.10 by Razvan Serea Glow provides detailed reporting on every hardware component in your computer, saving you valuable time typically spent searching for CPU, motherboard, RAM, graphics card, and other stats. With Glow, all the information is conveniently presented in one clean interface, allowing you to easily access and review the comprehensive hardware details of your system. Glow provides detailed information on various system aspects, including OS, motherboard, processor, memory, graphics card, storage, network, battery, drivers, and services. The well-organized format ensures easy access to the required information. You can export all the gathered data to a plain text file, facilitating sharing with others for troubleshooting purposes. No installation needed. Just decompress the archive, launch the executable, and access computer-related information. Glow runs on Windows 11 and Windows 10 64-bit versions. Glow 26.10 changelog: New Features The bootstrapping algorithm has been completely redesigned. The software can now launch directly without requiring TS Preloader. As part of this change, the startup splash screen displayed during initialization has been removed. In addition, spikes in CPU usage have been eliminated, resulting in a more stable architecture with significantly lower memory consumption. The Microsoft Office detection infrastructure within the Operating System section has been enhanced. Additional detection support has been added for Office C2R (Click-to-Run) installations. Furthermore, the license status evaluation system has been improved, and the priority order has been revised as follows: Licensed > Grace Period > Other (NOTIFICATIONS, EVALUATION, etc.). Glow now includes preliminary support for Wi-Fi 8 technology, allowing more detailed information to be displayed for Wi-Fi 8-compatible network adapters. Glow now provides full support for Bluetooth 6.2. Adapters supporting Bluetooth 6.2 can be analyzed in greater detail and with improved accuracy. The disk distribution view in the Disk section has been modernized, replacing the traditional table layout with a new 2×2 card-based design. The TS Custom Controls module has been updated to v26.7. Thanks to the new custom controls, all Türkaysoft applications now offer a more modern and consistent user interface aligned with Windows 11 design standards. Bug Fixes Potential line-ending handling issues in the Office detection code within the Operating System section have been resolved. Additionally, the output format has been standardized to UTF-8 to prevent character encoding issues and ensure consistent data processing. Several stability and file management issues within the Debugging infrastructure have been addressed. Problems that prevented new log files from being created after Debugging was disabled, as well as issues causing debug records to be lost, have been fixed. File deletion and reaccess issues that occurred after file locks were released have also been resolved. In addition, a bug that caused newly recreated log files to remain locked after deletion has been eliminated. Unnecessary blank lines within debug logs and the extra empty line that could appear at the end of log files have also been corrected. A shortcut key conflict caused by assigning identical hotkeys to both the DNS Test Tool and the Donation page has been fixed. The DNS Test Tool can now be accessed using CTRL + Shift + D, while the Donation page is available via CTRL + Alt + D. Changes The service responsible for providing the Public IP Address and Internet Service Provider information in the Network section has been updated to use the ipinfo.io infrastructure. This change improves the accuracy and consistency of the displayed data. (No external requests are made while Hiding Mode is enabled.) Some terms in the Dutch and Korean language files have been updated to make them clearer and more user-friendly. [TS Updater] Before the update process begins, users are now prompted to choose whether they would like to view the release notes. Note: Always unzip the program before using it. Otherwise you may get an error. Download: Glow 26.10 | 1.8 MB (Open Source) Links: Glow Homepage | Screenshot | Github Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Maradona if hydration breaks had existed in Mexico 86.
    • The quantum search for Time's origin had an equally mind-boggling conclusion by Sayan Sen Image by Steve Johnson via Pexels A theoretical study from researchers at the University of Surrey suggested that the direction of time may not be fundamentally fixed in certain quantum systems. The work, published in Scientific Reports, examined how the “arrow of time” could emerge from microscopic physics and found that time-reversal symmetry can remain intact even in models used to describe processes such as energy loss and thermalisation. The arrow of time refers to the observed one-way direction from past to future in everyday life. In macroscopic processes, this is easy to see. Spilled milk spreads across a table and does not gather back into a glass, and heat flows from hotter objects to colder ones. These processes shape the common sense idea that time moves in a single direction. However, at the level of fundamental physics, many equations do not prefer a direction of time. Time-reversal symmetry means that the same physical laws can describe a system whether time moves forward or backward. This has made it difficult to explain why irreversible behaviour appears in the large-scale world even when the underlying rules do not require it. Dr Andrea Rocco, Associate Professor in Physics and Mathematical Biology at the University of Surrey, described this contrast: "One way to explain this is when you look at a process like spilt milk spreading across a table, it's clear that time is moving forward. But if you were to play that in reverse, like a movie, you'd immediately know something was wrong – it would be hard to believe milk could just gather back into a glass. However, there are processes, such as the motion of a pendulum, that look just as believable in reverse. The puzzle is that, at the most fundamental level, the laws of physics resemble the pendulum; they do not account for irreversible processes. Our findings suggest that while our common experience tells us that time only moves one way, we are just unaware that the opposite direction would have been equally possible." The study focused on open quantum systems, which are quantum systems that interact with a surrounding environment. This environment, often described as a heat bath, can exchange energy and information with the system. The researchers used this framework to study how a direction of time might appear even when the underlying physics does not enforce one. A key part of the analysis involved the Markov approximation. This is a simplification used in many models where the system is assumed not to retain memory of its past states. The idea is that changes depend only on the current state, not on earlier history. This is commonly used when studying thermalisation, which is the process where a system settles into equilibrium with its environment. The study also used concepts such as master equations, including the Lindblad and Pauli equations, which describe how probabilities of different quantum states change over time. Another related model discussed was quantum Brownian motion, which describes the random-like movement of a quantum particle interacting continuously with its environment. In these descriptions, a “memory kernel” can appear, which is a mathematical term that accounts for how past states influence current behaviour. The researchers found that applying the Markov approximation did not break time-reversal symmetry. Even when the system interacted with an effectively infinite heat bath, the resulting equations of motion remained symmetric in time. This meant that the same mathematical description could, in principle, run forward or backward in time without contradiction. The study further showed that standard frameworks used in open quantum systems, including quantum Brownian motion and master equations like the Lindblad and Pauli forms, could be written in a time-symmetric way. These equations are typically used to describe processes that look irreversible, such as dissipation and thermalisation, but the results suggested they can also be interpreted as allowing evolution in both time directions. Thomas Guff, Research Fellow in Quantum Thermodynamics, said: "The surprising part of this project was that even after making the standard simplifying assumption to our equations describing open quantum systems, the equations still behaved the same way whether the system was moving forwards or backwards in time. When we carefully worked through the maths, we found that this behaviour had to be the case because a key part of the equation, the "memory kernel," is symmetrical in time. We also found a small but important detail which is usually overlooked – a time discontinuous factor emerged that kept the time-symmetry property intact. It’s unusual to see such a mathematical mechanism in a physics equation because it's not continuous, and it was very surprising to see it appear so naturally." The researchers also noted that deriving a one-way arrow of time from time-reversal symmetric microscopic dynamics remains an open problem across fields such as thermodynamics, statistical mechanics, particle physics, and cosmology. Their results suggested that some standard descriptions of irreversible behaviour in open quantum systems may be better understood using a time-symmetric formulation of Markovianity. According to the study, processes such as thermalisation, which are usually treated as irreversible, could in theory be described in a way that allows evolution in either time direction under the same rules. This does not imply that time reversal occurs in everyday life, but rather that the underlying equations do not strictly enforce a single direction. Overall, the findings suggested that the perceived direction of time may emerge from how physical systems are modelled and approximated, rather than from a fundamental asymmetry in the laws themselves. The researchers noted that this perspective could have implications for ongoing work in quantum mechanics, thermodynamics, and cosmology on the origin of time’s arrow. Source: University of Surrey, Nature This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing
  • Recent Achievements

    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
    • One Month Later
      eurospharma62 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      581
    2. 2
      +Edouard
      183
    3. 3
      PsYcHoKiLLa
      75
    4. 4
      Michael Scrip
      73
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!