Reinstalling Windows with seperate RAID 5 Array


Recommended Posts

Hi all,

I'm in need of little help here as I'm not entirely comfortable with RAID arrays and their foibles.

Currently in my desktop I have:

1x OCZ Vertex 2

5x Samsung 1TB drivers running in RAID5 controlled by:

ASUS P67 Rev 3.1

The Vertex 2 was used as a C drive, with al programs etc running off of it, and the RAID array being used for general storage use.

My Vertex 2 has just totally died, and I've got a Samsung 840 Pro to replace it with.

However I'm wondering what steps I should take when reinstalling the OS?

Should I disconnect the RAID array? Disable it in BIOS and re-enable it after I'm done installing Windows 8 onto the 840?

And finally, I'm assuming that all of my data on the RAID array is still there and secure? My top priority is of course maintaining that data!

Thanks for any help you can offer, I'm happy to provide any more info you may need.

Cheers.

Windows shouldn't touch the array as far as I know? Once the driver loads it should detect there is an existing filesystem on there and do nothing with it.

My guess based on the size variances between the RAID and the "C Drive" - The OS is not configured to be hot swappable and thus re-installing as long as the RAID is running within the same setup - everything should be fine.

Of-course, IF this is not a production enviroment - You could do as you described and simple disable the RAID. Might be over-kill but it is a sure-fire way of making sure nothing happens to the data.

So far I have done nothing regarding install, the 840 is in, and I'm ready to go but a bit worried by these conflicting answers!

Will having them unplugged have any negative effect?

Also, should I have SATA mode set to AHCI or RAID in my BIOS, it was previously set to RAID.

My two options as far as I can tell:

1. SATA Mode to RAID, all drives connected and fresh install on to the 840, or

2. SATA Mode to RAID, RAID array disconnected, and then plugged back in after install.

My priority is protecting the data on the RAID array, formatting and playing around with the C drive is of course now of no concern to me.

I'll be installing Win 8 64 Pro, the same OS as was on there prior to failure, with no other hardware changes.

Thanks for the help so far everyone!

Also, the RAID array is hardware controlled, not software.

Like so:

Unplug the power on the RAID array.

Install Windows. Get into Windows and fully set up.

Power down, replug the power for the RAID array.

Power up, enjoy your raid.

Even if I am wrong (and I'm not) this is the safest way to do it, and if anyone has objections to this idea other than it's a waste of time, feel free to pipe up.

I lost a RAID array to the issue I described. I made a topic on this forum, but I can't find it (might have been trimmed?). I lost my Windows install to a USB3 driver issue that corrupted the install. Reinstalled with the RAID array driver present. It read my disks, and then overwrote parts of the drive setting up an install (due to not finding a file system). Just like what we are talking about here.

I'm legitimately asking people to pipe up if I am wrong.

2. SATA Mode to RAID, RAID array disconnected, and then plugged back in after install.

That will work and you can also make sure the SATA ports are connected back in the same order but thats not really important for a working array.

Disconnecting the array first because installing the OS on another drive with SATA set to RAID insures windows don't installs the OS boot on the array with windows on the other drive.

Excellent, all done following articuno's instructions, here's my steps so far:

Unplugged all drives.

Installed Win 8 with just the SSD connected, fully updated through Windows Update, and installed all drivers etc from the ASUS download page

Replugged all drives in exactly the same order, booted into Intel RST and seen the following: http://i.imgur.com/inf769z.jpg Which all looks good, so my data is still sat there.

However when I boot into Windows I do not see the array as a drive, and neither do I see the disks in Device Manager, is there something I need to do for Windows to 'Discover' them?

if the data on the array is life and death data, disconnect them while installing windows, reboot, enable the array/controller and let W8 load up drivers for the new controller/raid array and off you go.

I leave my RAID0 array enabled any time I reformat, but its just game data n cache, user files are on my NAS.

in device manager, do you see the RAID controller? if not re-run Scan for hardware changes from the Action menu.

you should see something similar to below (but 5 RAID5 devices)

devmgr.jpg

Excellent, all done following articuno's instructions, here's my steps so far:

Unplugged all drives.

Installed Win 8 with just the SSD connected, fully updated through Windows Update, and installed all drivers etc from the ASUS download page

Replugged all drives in exactly the same order, booted into Intel RST and seen the following: http://i.imgur.com/inf769z.jpg Which all looks good, so my data is still sat there.

However when I boot into Windows I do not see the array as a drive, and neither do I see the disks in Device Manager, is there something I need to do for Windows to 'Discover' them?

Excellent, all done following articuno's instructions, here's my steps so far:

Unplugged all drives.

Installed Win 8 with just the SSD connected, fully updated through Windows Update, and installed all drivers etc from the ASUS download page

Replugged all drives in exactly the same order, booted into Intel RST and seen the following: http://i.imgur.com/inf769z.jpg Which all looks good, so my data is still sat there.

However when I boot into Windows I do not see the array as a drive, and neither do I see the disks in Device Manager, is there something I need to do for Windows to 'Discover' them?

Go into Disk Manager and see if they are there, they might be 'offline' or need a drive letter assigning to the array.

if the data on the array is life and death data, disconnect them while installing windows, reboot, enable the array/controller and let W8 load up drivers for the new controller/raid array and off you go.

I leave my RAID0 array enabled any time I reformat, but its just game data n cache, user files are on my NAS.

People don't really need to do this, he could of easily just left the driver part out of it and installed Windows 8 to the new SSD then installed the drivers. As long as he isn't booting off the RAID array itself, it's fine. You only need to install the drivers during setup if your going to install to the array itself.

Go into Disk Manager and see if they are there, they might be 'offline' or need a drive letter assigning to the array.

People don't really need to do this, he could of easily just left the driver part out of it and installed Windows 8 to the new SSD then installed the drivers. As long as he isn't booting off the RAID array itself, it's fine. You only need to install the drivers during setup if your going to install to the array itself.

Sorry should have been a bit more precise, I didn't mean in windows install start up, I meant if he had controller disabled in bios before installing W8. Once W8 was fully installed and he rebooted n enabled it.

I personally would have left it all enabled and let W8 setup see it in initial install time, what I always do on my own rig and exactly what I do with LUN mapped drives on SAN arrays presented as RAID volumes on rebuilds of servers. Never been an issue yet.

the raid config data is held and owned by the controller, same with the volumes in the raid container, windows will read it form that and not mess it up.

Indeed, I didn't install any drivers during Win 8 installation, allowed it to do it's regular thing seeing as I only had the one drive enabled.

I have the latest Intel RAID drivers installed, and also the latest Marvell SASA controller drivers, I'm a bit perplexed as to why it's not just appearing as I had anticipated!

(This is my first build using RAID in case you couldn't guess :p)

Indeed, in BIOS I see the 5 separate individual drives, in Intel RST I see the complete array, is there another time during boot I should see the array listed?

Here are the only two screens I see during the actual boot process:

http://i.imgur.com/OxysUeV.jpg

http://i.imgur.com/ySBdKxW.jpg

"Unplugged all drives.

Installed Win 8 with just the SSD connected"

So you booted the computer and powered on the array controller with ALL the drives unplugged - don't you think the array controller might notice that it booted up and all its disk were offline? I am quite sure it would mark them OFFLINE when that happens, and your array is not valid any longer.

Now you should be able to go into the controller and get them back online again.. But there would of been no freaking reason to unplug them in the first place.. You might do that with single drives if you your not sure you could tell which one is which on an install. But I would be pretty sure you could tell the difference between a SSD and a raid 5 array to which one you wanted to install too.

Good luck - its quite possible you blew up the array when you unplug all its drive and then boot the controller -- what do you think its going to think happened to its disks??

  • Like 1

I doubt it blew up lol - you might of meant this as a dramatic way of saying uninitialized. It can take quite some time for the re-initialization process to complete. If I pull a hot swappable disk on one of the older units - it could take up to 3 hours before the new one is back online. A flashing light indicates the drives status.

The controller should be able to re-init off of the disks based on the fact it's identified them as being disk members.

It ought just read the damn thing in theory. I've done it before with Intel controllers.

At the very worst it might require a resync.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Ocenaudio 3.19.3 by Razvan Serea  Ocenaudio is a full featured, fast and easy to use audio and music editor. It is the ideal software for people who need to edit and analyze audio files without complications. Ocenaudio also has powerful features that will please more advanced users. To assist ocenaudio development, a powerful toolset of audio editing, analysis and manipulation called Ocen Framework was created. ocenaudio is also based on Qt framework, a well known library for cross-platform development. Cross-platform support ocenaudio is available for all major operating systems: Microsoft Windows, Mac OS X and Linux. Native applications are generated for each platform from a common source, in order to achieve excelent performance and seamless integration with the operating system. All versions of ocenaudio have a uniform set of features and the same graphical interface, so the skills you learn in one platform can be used in the others. VST plugins support Ocenaudio supports VST (Virtual Studio Technology) plugins, giving its users access to numerous effects. Like the native effects, VST effects can use real-time preview to aide configuration. Real-time preview of effects Applying effects such as EQ, gain and filtering is an important part of audio editing. However, it is very tricky to get the desired result by adjusting the controls configuration alone: you must listen the processed audio. To ease the configuration of audio effects, ocenaudio has a real time preview feature: you hear the processed signal while adjusting the controls. The effect configuration window also includes a miniature view of the selected audio signal. You can navigate on this miniature view in the same way as you do on the main interface, selecting parts that interest you and listening to the effect result in real time. Multiselection for delicate editions To speed up complex audio files editing, ocenaudio includes multi-selection. With this amazing tool, you can simultaneously select different portions of an audio file and listen, edit or even apply an effect to them. For example, if you want to normalize only the excerpts of an interview where the interviewee is talking, just select them and apply the effect. Eficient edition of large files With ocenaudio, there is no limit to the length or the quantity of the audio files you can edit. Using an advanced memory management system, the application keeps your files open without wasting any of your computer's memory. Even in files several hours long, common editing operations such as copy, cut or paste happen almost instantly. Fully featured spectrogram Besides offering an incredible waveform view of your audio files, ocenaudio has a powerful and complete spectrogram view. In this view, you can analyze the spectral content of your audio signal with maximum clarity. Advanced users will be surprised to find that the spectrogram settings are applied in real time. The display is updated immediately when altering features such as the number of frequency bands, window type and size and dynamic range of the display. Ocenaudio 3.19.3 changelog: Fixes issues with MP4 files with more than 8 channels Fixes incorrect VBR detection for some CBR MP3 files Other bug fixes and improvements Download: Ocenaudio 64-bit | Portable | ~40.0 MB (Freeware) Download: Ocenaudio for Linux and Mac OS View: Ocenaudio Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • DiskGenius 6.2.0.1829 - All Versions: Free, Lite & Portable by Razvan Serea DiskGenius is a full-featured partition manager, which is designed to optimize disk usage for Windows users. It will efficiently help you recover lost data, resize/split partition, backup files, edit hex data, check bad sectors, manage virtual disks, erase data, etc.. Create a system image backup for current Windows with simple clicks to keep the operating system under protection. DiskGenius key features: Partition Management - It can create format, resize, extend, backup, split, hide and clone partition, both MBR and GPT are supported. Disk and partition conversion - Convert dynamic disk to basic, convert virtual disk format and convert MBR to GPT, convert primary partition to logical. File recovery - It can recover files deleted or emptied form recycle bin, recover files from damaged partition or disk and recover files by file type and supports file preview and file filter. Partition recovery - It is the best partition recovery program in that it can recover files from damaged, corrupted and RAW partitions, search for lost partition and recover files from it, besides, it can fix partition table. RAID recovery - It can reconstruct Virtual RAID and recover files from it, and all RAID types are supported. Sector Editor - A Hex editor is embedded to help users edit raw hex data and recover data manually. Backup and Restore - It can backup and restore partition including system partition, hard disk and partition table. Bad Tracks - It can check and repair bad sectors for all storage devices; check hard disk S.M.A.R.T. information. Delete files permanently - It can delete files permanently so that they can't be recovered by any data recovery software. Virtual Disk - It supports virtual disks, including VMware, Virtual PC and Virtual Box. Create WinPE bootable disk and you can manage disk partition when system crashes or there is no operating system on your computer. Support FAT12/FAT16/FAt32/exFAT/NTFS/EXT2/EXT3/EXT4 file system format. DiskGenius 6.2.0.1829 changelog: Add the "Disk Speed Test" feature. Add the "Windows Boot Repair and Conversion" feature. Add the BMB21-2019 erase standard to the "Erase Sectors" feature. Add support for restoring an individual partition from a PMFX disk image file. Enhanced The "Verify Or Repair Bad Sectors/Blocks" feature displays disk read speed in the detection window during scanning. The "Quick Partition" dialog box allows users to quickly select the number of partitions by pressing the numeric keys 1, 2, 7, 8, or 9. The "Set Volume Name" dialog box supports selecting preset volume labels provided by the software. The "Copy Sectors" feature supports resuming copy tasks after modifying the number of skipped bad sectors. Add the "TRIM Optimization" option to the format dialog box. The "Clone Partition" and "Clone Disk" features perform TRIM optimization on target partitions or disks before cloning. Add support for Not Equal To search conditions (prefixed with "!") when searching hexadecimal data in the sector editor. Optimize the display of capacity values in the program interface to show two decimal places. Add a minimize button to dialogs that may require long processing time. Enhance support for the ReFS file system. Enhance support for newer HIF and MP4 formats when recovering files by type. Enhance support for the EXT4 file system. Enhance compatibility of the "File Recovery" feature with special data structures. Fixed Fixed the issue that the selected file system type automatically reverted to NTFS after changing it to exFAT or EXT4 in the "Quick Partition" dialog box. Fixed inaccurate Unicode string search results in the "Sector Editor" feature. Fixed the issue that exceptions might occur when adding multiple disks in the "Erase Sectors" feature. Fixed the issue that insufficient target disk space was incorrectly reported in some cases when cloning, backing up, or restoring disks. Fixed the issue that folder modification timestamps were not preserved when copying files from ReFS partitions. Fixed the issue that Excel-format reports generated by features such as file copying or bad sector checking could not be opened when the report contained more than one million rows. Fixed the issue that folders were not displayed in the exclude-folder dialog box when backing up partitions to image files. Fixed the issue that the "Erase Sectors" feature could not be executed in some cases. Download: DiskGenius 6.2.0.1829 | 63.9 MB (Freeware, paid upgrade available) Download: DiskGenius Portable 64-bit | 40.0 MB Download: DiskGenius Portable 32-bit | 36.0 MB Download: DiskGenius Lite 64-bit | 13.4 MB Download: DiskGenius Lite 32-bit | 11.6 MB View: DiskGenius Home Page | DiskGenius Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Really? Use a better search engine https://www.google.com/search?...ourceid=chrome&ie=UTF-8
  • Recent Achievements

    • Week One Done
      agatameier earned a badge
      Week One Done
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      183
    3. 3
      PsYcHoKiLLa
      143
    4. 4
      ATLien_0
      95
    5. 5
      Steven P.
      75
  • Tell a friend

    Love Neowin? Tell a friend!