Weird glitch with static electricity


Recommended Posts

So apparently I had built up quite a bit of static electricity when I touched my mouse and it zapped. Normally I wouldn't care too much about that (that hasn't happened before though) but, when that happened, for a split second all my peripherals got disconnected and then reconnected, e.g., unplug the keyboard and then plug it back in. Since my knowledge about things like this is very bad, my question is - has my motherboard been damaged? Can stuff like this damage my motherboard/anything connected to it? If so, how to check that? So far everything seems to be working fine (*knock on wood*) but I'm still kinda paranoid.

Sounds like a strange situation that all your peripherals would cut out like that. I'm assuming your mouse has some metal on it which triggered you to discharge into it. And then your mouse must be wired, which sent the discharge into the USB port of your PC. It's definitively possible, I guess, but pretty unlucky.

Anyways, regarding static charge, it definitely can cause damage. It can sometimes cause things to burn out, but most of the time, the effects will be transparent. In most cases, static discharge will reduce the lifespan of the circuitry. Whether or not that makes any noticeable difference depends on the lifespan of those components in the first place.

To answer your question. As long as everything works, you should be fine. Just be more careful. :) If you have big issues with being staticy all the time, you can get a dehumidifier and it will pretty much solve the problem. Or find something else metal to discharge yourself with.

So apparently I had built up quite a bit of static electricity when I touched my mouse and it zapped. Normally I wouldn't care too much about that (that hasn't happened before though) but, when that happened, for a split second all my peripherals got disconnected and then reconnected, e.g., unplug the keyboard and then plug it back in. Since my knowledge about things like this is very bad, my question is - has my motherboard been damaged? Can stuff like this damage my motherboard/anything connected to it? If so, how to check that? So far everything seems to be working fine (*knock on wood*) but I'm still kinda paranoid.

We ordered these tiny INTEL pcs to use on the back of large display monitors. Kinda like thin clients where you need to install a flash and memory module but it runs fill windows. I set one up and logged in to windows. Went back to my desk and then back to the PC and when I touched it, it shocked the intel box. The whole system lost power right then. The intel PC turned back on and has been running fine for months with no problems.

So like Astra said, if everything works...I wouldnt worry about it.

It's simply your usb controller that detected a voltage peak and therefore shut down. That in turn caused all peripherals attached to that controller to become unavailable. You shouldn't worry about it. It's the exact reason why usb controllers have resettable fuses.

  • Like 3

Sounds like a strange situation that all your peripherals would cut out like that. I'm assuming your mouse has some metal on it which triggered you to discharge into it. And then your mouse must be wired, which sent the discharge into the USB port of your PC. It's definitively possible, I guess, but pretty unlucky.

Well, that's exactly what happened. :D I have a G500 and its scroll wheel is metallic + it's wired as well.

It's simply your usb controller that detected a voltage peak and therefore shut down. That in turn caused all peripherals attached to that controller to become unavailable. You shouldn't worry about it. It's the exact reason why usb controllers have resettable fuses.

Thank you for the information! I really hope it's like you said and no harm has been done. Either way, my mind is much more calm now. I upgraded recently so anything like this and I'm getting very nervous as I don't feel like spending even more money. :D

To answer your question. As long as everything works, you should be fine. Just be more careful. :) If you have big issues with being staticy all the time, you can get a dehumidifier and it will pretty much solve the problem. Or find something else metal to discharge yourself with.

You actually want a humidifier, not a dehumidifier. Dehumidifiers take moisture out of the air. This would cause static electricity to be easier to build due to the drier conditions. See here.

You actually want a humidifier, not a dehumidifier. Dehumidifiers take moisture out of the air. This would cause static electricity to be easier to build due to the drier conditions. See here.

Doh! :pinch: Yup, you're right. Thanks for catching that.

Probably won't ruin it. USB ports are designed for USB static surge, and grounds it appropriately (Desktop USB ports are earth grounded). One shock won't wreck anything. I've done a lot worse (I'm an electrical engineer at a major electronics firm. I was testing a new USB based product for static discharge protection while plugged in and powered on using an ESD gun that can generate up to +/-25kV. I've done over 300 discharges within a 3 hour timeframe repeatedly and the computer is still fine :p )

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Linux 7.2's first release candidate gets off to a good start by Paul Hill Credit: Larry Ewing It has been a few weeks since the release of Linux 7.1, and in that time, the Linux 7.2 merge window has been open, where developers can submit their features and patches ready for the upcoming release. That window is now shut, and the release candidate phase has begun so that new features can be tested and further fixes applied. According to the founder of Linux, Linus Torvalds, this week’s release candidate looks “reasonably normal”. Although we are super early in the release candidates, this is a good sign as it makes it more likely that an eighth release candidate will not be needed. Torvalds even mentioned that the update’s stats are only larger than they really are because there was another AMD header drop with a third of the patch just being AMD GPU register definitions, which aren’t big changes but make the code contributed look larger overall. In addition to this, he noted that just over half the patch is drivers, even when excluding the AMD register dump. The rest of the changes are spread out over architecture updates, tooling, documentation, and core kernel updates. In the next week, Torvalds says that he will be chilling out, taking the week “mostly off”. Despite this, he will be reading emails and keeping up with things, so if he is slow responding, now you know why. He said he is hoping for a calm week, but we will just have to see if the second release candidate is actually like that. We should expect seven or eight release candidates before Linux 7.2 is released, so expect it around the end of August. If you missed it a few weeks ago, be sure to check out our coverage of Linux 7.1's release.
    • Ridiculous claim that the labor cost difference of $6000 annually would increase cost per phone by $200. The employees produce 3 phones per month or what?
    • Sparkle 2.20.1 by Razvan Serea Sparkle is a free, open-source Windows optimization tool designed to make your PC faster, cleaner, and more private. With Sparkle, you can easily debloat Windows by removing unnecessary apps and services, disable Microsoft tracking to enhance privacy, and apply performance tweaks to boost speed. Its cleaner removes junk and temporary files, while every change is safe and fully reversible. Sparkle also features a modern, user-friendly interface with automatic updates, making system maintenance simple. Explore over 39 tweaks, from disabling telemetry and hibernation to optimizing network and game settings, all aimed at customizing and enhancing your Windows experience. Sparkle supports Windows 10 and 11. Sparkle 2.20.1 changelog: You can now change the Animation Direction from Up, Left, or Off. Added configurable animation direction (Up, Left, Off) for improved accessibility Added TTL caching to the system info backend Refactored tweak application flow to await NvidiaProfileInspector Improved IPC listener cleanup to correctly remove specific listeners Fixed online status not updating after successful network requests Updated system info tests to support backend caching Removed electron-toolkit utils dependency in favor of internal is.dev helper Fixed unwanted files and folders being included in application bundles Download: Sparkle 2.20.1 | Portable | ~100.0 MB (Open Source) Links: Sparkle Website | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Never used the G7 Pro, but I've never had a good experience with that style of d-pad and fighting games.
    • And I just bought a seat cushion for my mesh chair. The chair feels nice but the first time I sat in it with boxers, I realized I don't like the feel of mesh on my legs. 😂
  • Recent Achievements

    • One Month Later
      JKR earned a badge
      One Month Later
    • Dedicated
      Asgardi earned a badge
      Dedicated
    • Conversation Starter
      jessse3334 earned a badge
      Conversation Starter
    • Reacting Well
      JuvenileDelinquent earned a badge
      Reacting Well
    • One Month Later
      Excellence2025 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      496
    2. 2
      +Edouard
      247
    3. 3
      PsYcHoKiLLa
      154
    4. 4
      Steven P.
      86
    5. 5
      macoman
      65
  • Tell a friend

    Love Neowin? Tell a friend!