i5 build - will these work together?


Recommended Posts

Goals,

1. PC that would last four years or so (with upgrades).

2. General use, development, and gaming (GW2 & Witcher 2).

3. Should run cool, be very stable, and have some room for OC (later).

4. Strictly Intel for CPU and NVIDIA for GPU. (i7 is too expensive)

5. Sweet spot @ ~1000 USD

6. Everything will be ordered Friday

Concerns,

1. Difficulty of build (never done this before).

2. Components not fitting together and/or not being compatible with each other.

3. Bottlenecking performance somewhere.

4. Forgetting some important component.

With help of Newegg, Google, and YT, I have made the following selection,

CPU,

Intel Core i5-3570K Ivy Bridge 3.4GHz (3.8GHz Turbo) LGA 1155 77W Quad-Core Desktop Processor Intel HD Graphics 4000 BX80637I53570K

Motherboard,

ASUS P8Z77-V LK LGA 1155 Intel Z77 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard with UEFI BIOS

CPU cooler,

COOLER MASTER Hyper 212 Plus RR-B10-212P-G1 "Heatpipe Direct Contact" Long Life Sleeve 120mm CPU Cooler Compatible with Intel 1366/1155/775 and AMD FM1/FM2/AM3+

Case,

Rosewill CHALLENGER Black Gaming ATX Mid Tower Computer Case, comes with Three Fans-1x Front Blue LED 120mm Fan, 1x Top 140mm Fan, 1x Rear 120mm Fan, option Fans-2x Side 120mm Fan

PSU,

Rosewill HIVE Series HIVE-650 650W Continuous @40?C, 80 PLUS BRONZE Certified, Modular Design, Single +12V Rail, ATX12V v2.31/EPS12V v2.92, SLI Ready, CrossFire Ready, Active-PFC Power Supply

RAM,

G.SKILL Ripjaws X Series 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-1600C9D-16GXM

GPU,

EVGA SuperClocked 02G-P4-2662-KR GeForce GTX 660 2GB 192-bit GDDR5 PCI Express 3.0 x16 HDCP Ready SLI Support Video Card

SSD (OS),

Kingston HyperX 3K SH103S3/120G 2.5" 120GB SATA III MLC Internal Solid State Drive (SSD) (Stand-Alone Drive)

HDD (Storage),

Western Digital WD Black WD1002FAEX 1TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive

BD,

LITE-ON Black 4X BD-ROM 8X DVD-ROM 32X CD-ROM SATA Internal 4X Blu-ray Reader Model iHOS104-06 - OEM

Link to comment
https://www.neowin.net/forum/topic/1132120-i5-build-will-these-work-together/
Share on other sites

personally I'd switch out the PSU with one that's at least silver certified, but besides that everything else looks fine

you shouldn't really have any spacing issues with a standard ATX size build and the parts your choosing

personally I'd switch out the PSU with one that's at least silver certified, but besides that everything else looks fine

you shouldn't really have any spacing issues with a standard ATX size build and the parts your choosing

Alright, will take advice on the PSU.

One more thing, what about noise?

How bearable would it be to, say, have such a PC at high load in your bedroom overnight? (Although a more likely situation would be to download steam games overnight doing nothing else)

Alright, will take advice on the PSU.

One more thing, what about noise?

How bearable would it be to, say, have such a PC at high load in your bedroom overnight? (Although a more likely situation would be to download steam games overnight doing nothing else)

the better PSU will be worth it, every little bit helps with the power efficiency IMO. your electric bill will thank you in the long run

and as far as the noise goes, it all depends on a few things, 1. the noise rating on the psu (the psu is usually the biggest factor, usually it will say if it's a super quiet PSU). 2. your CPU fan (and it looks like the one you have chosen will be just fine in that regard). 3. the fans in the gpu

over all if looks like the build you have laid out will be pretty quiet so you shouldn't have to worry too much (and honestly if you're anything like me, a little white noise at night is soothing :p)

Firstly that's a sweet looking build right there. You will be able to easily overclock that to 4.5GHz but not with the cooler in your spec there. The Noctua NH-D14 air cooler should easily give you temps of 60-70 under max load:

http://www.newegg.co...N82E16835608018

A little pricey but your other option would be water cooling. With the above cooler, those GSkills will not have enough clearance under the fan so switch them out for the following Corsair low profile DIMMs (don't be put off by the 2 x 2 egg reviews, seems like those idiots didn't set their BIOS settings for the DIMMs to X.M.P profile):

http://www.newegg.co...N82E16820233388

Lastly as Brando mentioned switch that PSU with something more reliable:

http://www.newegg.co...N82E16817207017

I've been through a fair few PSU's in my time including noisy PSU's with coil whine issues. I'd avoid Corsair/Seasonics new range as they seem to be plagued with coil whine issues. The XFX PSU above, although double your current specced PSU's price, will last you a good while. It's innards are made by Seasonic but from a range not affected by coil whine noise issues.

You shouldn't really hear that machine above the case fans/GPU fan when its under load. I've never looked into Rosewill cases before but that one seems to have decent reviews so I wouldn't assume you'd have anything to worry about on the noise side.

Firstly that's a sweet looking build right there. You will be able to easily overclock that to 4.5GHz but not with the cooler in your spec there.

O.o

I never was planning on going that far.

I didn't mean 'none at all'

no, what he means is the models with K don't overclock very well if you don't have the right mobo

you'll want this version of the CPU if you plan to overclock at all http://www.newegg.co...N82E16819115233

no, what he means is the models with K don't overclock very well if you don't have the right mobo

you'll want this version of the CPU if you plan to overclock at all http://www.newegg.co...N82E16819115233

I'm confused Brando...You linked the 3570 if he wants to overclock but isn't it the 3570k with the unlocked multipliers for overclocking?

I'm confused Brando...You linked the 3570 if he wants to overclock but isn't it the 3570k with the unlocked multipliers for overclocking?

idk, I might be mixing up the two, i don't know much about over clocking to be honest

Your BD drive doesn't have the ability to burn DVDs or CDs which could possibly be an issue. I very rarely do it, but if you're going to have the drive you should probably get one that can burn DVDs and CDs at least. $25 more gets you one that can burn BD, DVD, and CD.

Also, check if you live near a Microcenter. They have the 3570K for $40 less than Newegg and you also get $40 off a compatible motherboard. I believe most managers will match Newegg's prices, too. They have a 60 day return policy (that in my experience has been no questions asked) in case anything goes wrong.

You also don't have an OS listed. If you plan on using Windows don't forget to take that into consideration.

The 3570k is fine. The k denotes the CPU has an unlocked multiplier thus allowing overclocking. Non k processors cannot be overclocked.

If your not planning on overclocking it by much, I'd stick the the stock cooler & your original choice of ram but my suggestion was based on you wanting something that'd be competitive and give your decent performance for a few years.

Some other questions,

I take it I will have to set the proper memory speed manually (reading up on it - seems like the answer is 'yes')?

Now the i series CPUs have the intel graphics chip on them - and it gets turned off if a PCIe GPU is detected?

What would I expect the temp of the CPU to be (vanilla - as to check that I mounted everything OK)?

JJ is right, though. Any amount of overclocking you do, you want to keep your CPU as cool as possible.

EDIT: Answered as I was writing post

I'm confused Brando...You linked the 3570 if he wants to overclock but isn't it the 3570k with the unlocked multipliers for overclocking?

That confused me too.

Your BD drive doesn't have the ability to burn DVDs or CDs which could possibly be an issue. I very rarely do it, but if you're going to have the drive you should probably get one that can burn DVDs and CDs at least. $25 more gets you one that can burn BD, DVD, and CD.

Also, check if you live near a Microcenter. They have the 3570K for $40 less than Newegg and you also get $40 off a compatible motherboard. I believe most managers will match Newegg's prices, too. They have a 60 day return policy (that in my experience has been no questions asked) in case anything goes wrong.

You also don't have an OS listed. If you plan on using Windows don't forget to take that into consideration.

Noted.

I already have the OS - will be Win 8 x86_64 professional - legal.

There doesn't seem to be one in my state. =(

If your not planning on overclocking it by much, I'd stick the the stock cooler & your original choice of ram but my suggestion was based on you wanting something that'd be competitive and give your decent performance for a few years.

I think, I will skip on the HDD & BD (for the time - I have been living w/ external ones and a netbook problem free anyway) and will go with your suggestion.

The CPU & Motherboard are most difficult to upgrade and in as much getting good ones from the start will save me trouble. =)

Edited by _Alexander

Firstly that's a sweet looking build right there. You will be able to easily overclock that to 4.5GHz but not with the cooler in your spec there.

Of course you can. I've been using the Hyper 212+ to overclock my 2500k to similar clock speeds and very comfortably so, and I'm far from the only one doing it. It's diminutive price tag isn't representative of its performance, really.

I would recommend an Antec HCG620M PSU, Antec uses solid caps in thier PSUs so you don't get dodgy chinese caps.

Also the modular ones are way nice for cable mgmt and air movement.

Excellent CPU cooler. I have the 212 EVO and it's HUGE but very nice. My temps never go above 55C in Skyrim on pretty much max settings.

Normal ops is 38C on the CPU (i5 3570K) and 25C for the GPU (EVGA GF650Ti SSC)

On the SSD:

Avoid Sandforce controllers. Those have lots of problems and are very unstable and have the shortest life span. TONS of people with less then 6 m.o. drives that died.

I recommend a Samsung 830 or 840 pro.

GPU:

Excellent choice. I got the EVGA 650Ti SSC and it's pretty nice.

Got it working together today.

I am very much surprised by how much physical force was necessary to shove things where they belong.

I mean, for all intensive purposes the CPU is under the force of a thousand suns right now.

Some hard points were,

Figuring out how to plugin reset, power, and HDD led

Stuffing the GPU in there, the showing part and the moving all cords out of the way part.

The PSU cords are a pain they are not that bendable.

I don't know where to shove cords - for now they are dangerously close to the fans (The main mobo power plug and the noctua fans plug).

CPU, Memory, and Primary HD: 7.8

Graphics and Gaming Graphics are at 7.9

RAM is in single channel as otherwise I would have needed to remove that hell of earth of a cooler (when upgrading) - so I can improve some of those numbers in the long run.

This is a nice breath of air compared to my netbook's 2.3 for the CPU.

I mean I am transitioning from a primary of a netbook connected to an HDMI monitor to this.

Been running prime95 for half an hour (vanilla 100x38),

Min C / Max C

21 / 49

28 / 55

27 / 55

24 / 49

room tem is 74 farenheit - ~23.3 C says bing

Not sure why Core 1 and Core 2 are hotter than Core 0 and Core 4

W8x64 boots under 3sec

I mean, for all intensive purposes the CPU is under the force of a thousand suns right now.

comic2-1852.png

... hem, anyway, back to the topic. For cords you can tie then together with tie-wraps or whatever you have, those that tend to be loose in the case I just tape them to a nearby side. People who do it properly route them through the back of the case so there are no cables at all hanging around, but it's not really necessary.

This topic is now closed to further replies.
  • Posts

    • Microsoft admits one of the most crucial Outlook features is currently broken by Sayan Sen Microsoft is making some decent progress when it comes to Windows 11. Recently we have confirmed reports of some rather useful improvements landing in the next version of the OS, 26H2, wherein GPU driver TDR crashes may finally be fixed, plus the company is also allowing users to disable web content on the Search. On the Outlook front though things have not been so rosy. Last month in May we reported several problems affecting basic functionalities on the app. These included a problem where documents would open blank or corrupt themselves. Following that, Quick Steps, a very useful feature, would no longer work correctly, and finally, Microsoft acknowledged a problem wherein images would fail to load up properly inside the email. Microsoft had resolved those bugs later and almost exactly a month after we reported on them, the company has now admitted a new similarly basic issue, this time on Macs. Users recently started noticing that Outlook would no longer display email threads properly as the original message itself was not displayed. An affected user Tsoumpas, C (ngmb) nicely described the problem in a forum post they made on Microsoft's site. They wrote: "Description of the issue: After updating Outlook for Mac [Version 16.110 (26061317)] on 18/6/2026, replying to any email no longer includes the original message in the reply window. Prior to the update, replies correctly contained the original email text below my response. Expected behavior: The original message should be included in the reply, as in previous Outlook versions and according to the configured reply settings. Actual behavior: The reply window contains only a blank composition area (or only my response), with none of the original email text included." Obviously this must be a highly frustrating for users as noted by several in that thread. The post, at the time of writing, has also been upvoted by more than 40 users indicating that is a fairly widespread bug. Thankfully Microsoft seems to have acknowledged the problem right around that time as it opened a new issue on its official website. In the support article, the company recommends switching to Outlook for Mac from the legacy app, where the problem appears to be happening.
    • PotPlayer 260622 by Razvan Serea PotPlayer is an extremely light-weight multimedia player for Windows. It feels like the KMPlayer, but is in active development. Supports almost every available video formats out there. PotPlayer contains internal codecs and there is no need to install codecs manually. Other key features include WebCam/Analog/Digital TV devices support, gapless video playback, DXVA, live broadcasting. Distinctive features of the player is a high quality playback, support for all modern video and audio formats and a built DXVA video codecs. A wide range of subtitles are supported and you are also able to capture audio, video, and screenshots. A comprehensive video and audio player, that also supports TV channels, subtitles and skins. Its been described on the Internet as The KMPlayer redux, and it pretty much is. Daum PotPlayer 260622 (1.7.22963) changelog: Removed Kakao TV Added pause function when navigating via the navigation bar Significantly improved internal stability Fixed an issue where colors appeared strange during RGB24 processing Improved playback for some HTTP streams Improved sync processing for the built-in audio renderer Fixed an issue where certain MP4 files behaved abnormally during playback Download: Daum PotPlayer (64-bit) | 54.7 MB (Freeware) Download: Daum PotPlayer (32-bit) | 61.1 MB View: Daum PotPlayer Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Tixati 3.44 is out.
    • Speccy 1.34.084 by Razvan Serea Speccy will give you detailed statistics on every piece of hardware in your computer. Including CPU, Motherboard, RAM, Graphics Cards, Hard Disks, Optical Drives, Audio support. Additionally Speccy adds the temperatures of your different components, so you can easily see if there's a problem! Processor brand and model Hard drive size and speed Amount of memory (RAM) Graphics card Operating system At first glance, Speccy may seem like an application for system administrators and power users. It certainly is, but Speccy can also help normal users, in everyday computing life. If you need to add more memory to your system, for example, you can check how many memory slots your computer has and what memory's already installed. Then you can go out and buy the right type of memory to add on or replace what you've already got. Download: Speccy 1.34.084 | 20.5 MB (Freeware) View: Speccy Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • ImgDrive 2.2.7 by Razvan Serea ImgDrive is a CD/DVD/BD emulator - a tool that allows you to mount optical disc images by simply clicking on them in Windows Explorer. If you have downloaded an ISO image and want to use it without burning it to a blank disc, ImgDrive is the easiest way to do it. ImgDrive features: One-click mounting of iso, cue, nrg, mds/mdf, ccd, isz images Runs on 32-bit and 64-bit Windows versions Mount ape, flac, m4a, wav, wavpack, tta file as AUDIO CD (16-bit/44.1kHz) Mount a folder as DVD/BD Mount images in command line Does not require rebooting after installation Support up to 7 virtual drives at the same time Support multi session disc image (ccd/mds/nrg) A special portable version is available Translated to more than 10 languages Support File Type: .ccd - CloneCD image files .cue - Cue sheets files of ape/flac/m4a/tta/wav/wv/bin .iso - Standard ISO image files .isz - Compressed ISO image files .nrg - Nero image files .mds - Media descriptor image files ImgDrive 2.2.7 changelog: Added command line parameter to set number of drives Added AACS-Auth support for HD DVD Bumped kernel driver version to 2.2.7 Download: ImgDrive 2.2.7 | 692 KB (Freeware, paid upgrade available) Download: ImgDrive Portable 535 KB View: ImgDrive Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Dedicated
      tuben earned a badge
      Dedicated
    • Week One Done
      mnsgroup earned a badge
      Week One Done
    • Conversation Starter
      sumytbe earned a badge
      Conversation Starter
    • One Year In
      B4dM1k3 earned a badge
      One Year In
    • One Year In
      DarkWun earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      522
    2. 2
      +Edouard
      199
    3. 3
      PsYcHoKiLLa
      94
    4. 4
      Michael Scrip
      82
    5. 5
      neufuse
      69
  • Tell a friend

    Love Neowin? Tell a friend!