• 0

Is there a free software that can join Mpeg-2 videos without re-encoding?


Question

I use a DVD recorder to record shows from TV and I'm trying to edit out the commercials. I have many softwares that can snip out parts of the video and I use it to snip out the parts of the videos that I want and I would like to piece it together to make it commercial-free.

So let's say I record an episode of a TV show and the half-hour show goes something like this...

Beginning

Commercial Break

Middle

Commercial Break

End

So, I have many softwares that will clip the parts that I want. So, I clip the parts that I want, i.e. Beginning, Middle and End, because I don't want the commercials. However, I have three separate clips (Beg, Mid, End) and would now like to simply piece them together without re-encoding since it results in quality loss. I have tried many softwares, such as Mpeg2Cut2, and many of these softwares just screw up the video. It does a horrendous job! It will not piece together a video without causing any sort of weird side effect.

I don't understand. It's a simple thing.... I just want to join these mpeg videos together and make it one mpeg video! That's it!!

Is there any free software out there than can perform this simple thing without any problems?

Thanks!

Recommended Posts

  • 0

There is a thread on a similar topic here, but there is no polished solution posted. However, you could probably create your own script without too much hassle based on the information posted in the aforementioned thread, if you're so inclined.

  • 0

Im pretty sure you can copy them into one file copy /b this how I recall doing it in the past

copy /b snip1.mpg+snip2.mpg+snip3.mpg newfile.mpg

When I get a chance I can verify that -- but I thought you were going to go the digital route.. Converting the files to h.264 should not in any way degrade the quality, if it is - your doing it wrong ;)

  • Like 2
  • 0

When I get a chance I can verify that -- but I thought you were going to go the digital route.. Converting the files to h.264 should not in any way degrade the quality, if it is - your doing it wrong ;)

It is.

And the digital route is WAY too time consuming. Takes over an hour to convert a 45 minute show to h.264. Formatting to DVD and burning will take less than 20 minutes....

And is this what you're talking about?

http://txpress.blogspot.com/2007/01/join-multiple-video-mpg-files-in.html

I just googled it now and saw that link. I can try it when I get home. I hope it's that simple.

  • 0

Well let me fire up my dvd recorder tonight and to a little testing of my own. So I can get mpeg2 file to work with.

But you could also just use the mpg files as your digital copy - burning it to DVD is the part I don't understand.

So did you try out the copy /b command..

edit: I have some titus and seinfeld dvd's -- might just grab an episode off those to do the test with so I don't have to bother spending the recording time on dvd recorder to get a file to work with. I doubt the older dvds are encrypted? So should be able to just copy the vob off and change convert it to h264.

  • 0

Well let me fire up my dvd recorder tonight and to a little testing of my own. So I can get mpeg2 file to work with.

But you could also just use the mpg files as your digital copy - burning it to DVD is the part I don't understand.

So did you try out the copy /b command..

I'm not at home now. I'll try tonight.

I burn to DVD so I don't have to store on my hard drive and also, I can play the files on a DVD player. Extracting mpg files from formatted DVDs is very easy. So, I can always take the DVDs I burn and turn them back into video files in no time.

  • 0

Ok I just grabbed a vob off one of my titus dvds

Complete name : D:\testmpeg2\VTS_01_2.VOB

Format : MPEG-PS

File size : 1 024 MiB

Overall bit rate mode : Variable

Video

ID : 224 (0xE0)

Format : MPEG Video

Format version : Version 2

Format profile : Main@Main

Format settings, BVOP : Yes

Format settings, Matrix : Custom

Format settings, GOP : M=3, N=15

Bit rate mode : Variable

Maximum bit rate : 8 802 Kbps

Width : 720 pixels

Height : 480 pixels

Display aspect ratio : 4:3

Frame rate : 29.970 fps

Standard : NTSC

Color space : YUV

Chroma subsampling : 4:2:0

Bit depth : 8 bits

Scan type : Interlaced

Scan order : Top Field First

Compression mode : Lossy

Fired up handbrake - picked normal as the preset and 2 minutes later

post-14624-0-43354600-1359115481.png

Now have MUCH smaller file only 325MB vs 1024 MB of the VOB

Complete name : D:\testmpeg2\test.m4v

Format : MPEG-4

Format profile : Base Media / Version 2

Codec ID : mp42

File size : 318 MiB

Duration : 21mn 15s

Overall bit rate mode : Variable

Overall bit rate : 2 092 Kbps

Encoded date : UTC 2013-01-25 11:53:03

Tagged date : UTC 2013-01-25 11:55:25

Writing application : HandBrake 0.9.8 2012071700

Video

ID : 1

Format : AVC

Format/Info : Advanced Video Codec

Format profile : [email protected]

Format settings, CABAC : Yes

Format settings, ReFrames : 4 frames

Codec ID : avc1

Codec ID/Info : Advanced Video Coding

Duration : 21mn 15s

Bit rate mode : Variable

Bit rate : 1 927 Kbps

Width : 720 pixels

Height : 480 pixels

Display aspect ratio : 4:3

Original display aspect ratio : 4:3

Frame rate mode : Variable

Frame rate : 29.970 fps

Minimum frame rate : 9.785 fps

Maximum frame rate : 29.970 fps

Standard : NTSC

Color space : YUV

Chroma subsampling : 4:2:0

Bit depth : 8 bits

Scan type : Progressive

Bits/(Pixel*Frame) : 0.186

Stream size : 293 MiB (92%)

Writing library : x264 core 120

Encoding settings : cabac=1 / ref=1 / deblock=1:0:0 / analyse=0x1:0x111 / me=hex / subme=2 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=0 / me_range=16 / chroma_me=1 / trellis=0 / 8x8dct=0 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=0 / threads=6 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=1 / b_bias=0 / direct=1 / weightb=1 / open_gop=0 / weightp=1 / keyint=300 / keyint_min=30 / scenecut=40 / intra_refresh=0 / rc_lookahead=10 / rc=crf / mbtree=1 / crf=20.0 / qcomp=0.60 / qpmin=3 / qpmax=69 / qpstep=4 / ip_ratio=1.40 / aq=1:1.00

Encoded date : UTC 2013-01-25 11:53:03

Tagged date : UTC 2013-01-25 11:55:25

Color primaries : BT.601 NTSC

Transfer characteristics : BT.709

Matrix coefficients : BT.601

As to quality - I am not seeing any loss in it.. Maybe I am not as tuned to video quality of DVD video at max 720x480 from the source resolution on my HD TV or my computer monitor that runs at 1280x1024 resolution?

Lets say there some loss in quality - at only 1/3 of the size.. I can live with it ;)

edit: BTW got me wanting my titus on my server - not sure why I had never bothered to rip it before. So fired up makemkv - which is using mpeg2 in the mkv container so they are HUGE.. But makes it real easy to pull off the episodes as titles and only grab the audio you want if there is other lang, commentary, tracks.

Then just popped those files into a handbrake queue. First 2 disks done without even really thinking about it. Just click a few buttons when I think about it as I go about my morning surfing, etc. Takes longer to copy the video off the dvd then it does for handbrake to convert them to smaller size and better format. I will get a few more of the dvds copied over before I head out to work - and then just let handbrake convert them while gone.

My point of this - is who really cares if takes 2 minutes or 20? Just queue it up and let run when your sleeping or away from the house, etc.

  • 0

Im pretty sure you can copy them into one file copy /b this how I recall doing it in the past

copy /b snip1.mpg+snip2.mpg+snip3.mpg newfile.mpg

Ok, just tested it. The good news is, it joined the files. The bad news is that it had the same side effect as the other softwares I tried. I tried to remove the commercials from a 60 minute show. After I snipped the videos and joined them, the commercials that I removed are gone (which is what I wanted, of course), but the timer still clocks at 60 minutes!!! When I formatted it to DVD, it still clocks at 60 minutes. When I tried playing the DVD file on the computer, it plays fine but the timer just gets messed up because the video is less than 60 minutes, but the timer on the video is insisting it's 60 minutes. Now, when I tried playing on a DVD player, the player gets stuck on the edited parts. I hope I'm not confusing anyone, but I can't help it because it is a very confusing problem.

But long story short, this did not merge successfully. It merged, but it's obviously badly merged together since the timer got messed up and the DVD players freak out at the edited parts. Sigh! It doesn't look like this simple thing can be done. I'm just going to give up, leave the videos the way they are, and just add chapter stops after the commercial breaks. That way I can just press "skip" on the remote to easily bypass the commercials when I rewatch these videos.

  • 0

If the time is messed up - hmmm idx for mpeg is at the end of the file? So ok its possible that some stand alone player that does not reindex the file on load might have issues. You would have to reindex the file I would think

Stand alone players for DVD are old school ;)

I would think avidemux could prob reindex the file for you. Or prob mencoder -forceidx

  • 0

If you can live with mkv files mkvtoolnix can mux mpeg files and have a nice gui. Just add the first file and append the rest and they should play without issue. I didn't try with split files but i downloaded samples from here and they played fine in mpc-hc when joined.

You should also have a look at ffmpeg if you are not afraid to use the command line . Here are instructions for splitting and joining.

  • 0

He doesn't want to use any sort of modern container for his files, nor does he want to use a modern codec. He wants to write the files to DVD so he can play them in his dvd player.

Think of it of 1999, and he is partying there ;)

He says that converting the files to h264 messes up the quality of his recorded to a dvd files which then pulls off creates a menu for and then reburns to dvd. Problem he is having now if he edits the file to pull out the commercials he is left with 3 or 4 snips of video that he wants to rejoin. But the index would be off when done this way and standalone players are not going to reindex on the fly like many software players do to forgive the issues in the file.

So he needs to join them back together and create a new index for the now shorter file. I would assume ffmpeg would do that - but he doesn't want to spend any processing time on the file ;)

  • 0

Apparently you guys don't care about quality loss, but I do. Even if it's just a little, I don't like it. That's one of the reasons why I'd rather buy a movie on Blu-ray and why I upgrade some of my DVD movies to Blu-ray. I want to watch my movies and shows in the best quality I can.

And my friend, if you're insisting that DVD is out and h264 is in, you're wrong. BLU-RAY is the new thing!! And as far as I'm concerned, all Blu-ray players play DVDs. So as long as Blu-ray players are around, then my DVDs are playable.

So, if you want to "get with the times," then ditch h254 and buy Blu-ray instead. :rolleyes:

  • 0

Stand alone players for DVD are old school ;)

My friend, everything today is old school. You buy one thing and few months later, something new comes out which renders your item obsolete, or "old school." And like I said, the new thing today is Blu-ray, not h264. Blu-ray delivers the BEST 1080p picture and audio quality. So, buy Blu-ray and ditch h264.

And I don't buy standalone players anymore. All my standalone players are my older players that I bought over a decade ago. Apparently, DVD players don't break down as easily as VCRs, so while all of my VCRs are gone, all my DVD players are still alive... even my 15 year old Sony DVD player.

  • 0

Dude Blu-ray is not the new thing today. It's only a matter of time until all media is digital on a hard drive on some server somewhere. It won't be too long until all physical media is obsolete.

After all what are the benefits of having Blu-ray over all your movies in a digital format on your computer hooked up to your TV? There isn't one. Not sure why you are moaning that digital formats provide worse quality than Blu-ray, because they simply don't. After all Blu-ray is just a DVD with a bigger capacity that allows for larger digital files (meaning better quality) to be put on them

  • 0

Dude Blu-ray is not the new thing today. It's only a matter of time until all media is digital on a hard drive on some server somewhere. It won't be too long until all physical media is obsolete.

After all what are the benefits of having Blu-ray over all your movies in a digital format on your computer hooked up to your TV? There isn't one. Not sure why you are moaning that digital formats provide worse quality than Blu-ray, because they simply don't. After all Blu-ray is just a DVD with a bigger capacity that allows for larger digital files (meaning better quality) to be put on them

Physical media will not die. Blu-ray sales keep rising, which means it's a very successful format. Just because a few of you go all-digital, it doesn't mean everyone else it doing the same. And it's hard to go all digital because it makes it easy for people to copy and share files with others. With Blu-ray and DVDs, the formats are encrypted to prevent such a thing.

And people told me not to hook up a computer to the TV. Everyone told me to buy a media player instead. To be honest, a computer makes more sense because you can always install softwares to play any type of video file you want.

And yes, converting any file to another format will also result in quality loss, maybe not noticeable to you, but it's there. Just like MP3 files have lower quality than CDs.. yet people dance away listening to MP3s on their Ipod. Most people don't care, but many audiophiles will not listen to MP3s, only CDs, because CDs sound significantly better!

  • 0

No, CD's are not better quality than all MP3's. The problem is that there are a load of bad quality <100kbps MP3's out there that yes do sound awful. Better so many now are 320kpbs+ which sound considerably better than any CD will.

Not sure who told you not to connect your computer up to you TV, but all I can say is they obviously don't know what they are talking about.

Its hard to go all digital because of all the sharing? No, thats what makes it so easy!!

No physical media will never die completely, but it will get closer and closer. Blu-ray sales may be on a slight increase in sales, but not even close to the increase in digital sales or the uptake in streaming services like Netflix. Add to that the slump in DVD sales and physical media is on the downturn. Thats not the case for digital though. Not saying its all a good thing, but its happening.

  • 0

No, CD's are not better quality than all MP3's. The problem is that there are a load of bad quality <100kbps MP3's out there that yes do sound awful. Better so many now are 320kpbs+ which sound considerably better than any CD will.

Actually, there is still some quality loss. I used to not be able to hear the difference, but I finally got convinced when I spoke to a few audiophile nuts. They made me listen to the difference on their high-end equipment and you can notice it when listening there. But on the average equipment that non-audiophile nuts own, you really can't hear the difference. And believe me, I call them "audiophile nuts" because they can hear the difference so well that they swear LPs sound better than CDs and MP3s that they actually still buy them.

Not sure who told you not to connect your computer up to you TV, but all I can say is they obviously don't know what they are talking about.

I'm glad I can just do that because I have a laptop and a PC in port on my TV. I can just hook it up and enjoy the files. I know that there are some cheap media players that people referred me to, but after reading those reviews at Amazon, I can see that they are problematic and I'll just get what I pay for. In short, they're cheap for a reason. If I want something good and problem-free, I need to spend a couple of hundred dollars. At least a laptop is guaranteed to play ANY digital file without any issue. If I do encounter a problem, I can simply install a better software. A laptop is the most future-proof route than a digital media player, since a media player is limited.

Its hard to go all digital because of all the sharing? No, thats what makes it so easy!!

Easy for you, but hard for the studios financially since people are not obtaining their movies legally. That is why studios are fighting to keep physical media alive.

No physical media will never die completely, but it will get closer and closer. Blu-ray sales may be on a slight increase in sales, but not even close to the increase in digital sales or the uptake in streaming services like Netflix. Add to that the slump in DVD sales and physical media is on the downturn. Thats not the case for digital though. Not saying its all a good thing, but its happening.

What about 3D Blu-ray? Seems like that's another new thing and what has made my 2D HDTV and 2D Blu-ray player obsolete. If anything, 3D Blu-ray and 3D TVs are going to take over, not digital files. Frankly, the thought of 3D home entertainment makes me sick, but it's the new fad that I've been hearing about a lot lately!

  • 0

By the way, I need clarification here. Since you guys are telling me to ditch DVDs and go all-digital, does that mean I should not buy DVDs anymore? There are many DVDs out there (and more to come) that you can't find anywhere else. So, does that mean I should not buy them? Or are guys saying that it's ok to buy them, but just rip and convert them to h264?

  • 0

Definitely keep buying DVD's. They're not anywhere near gone yet and they are much cheaper at the moment. But yeah when you buy them, rip them to your computer using a good codec, and you should end up with your own home media centre if you hook it up to your tv.

Thats pretty much what I have going on at the moment. Bought a 2TB drive and everytime I buy a new DVD I rip it and shove it on their. I still buy a lot of cheap DVDs and the 2tb drive is pretty much full already, so I may have to buy another in the near future. It makes it so much easier for me though. Instead of trawling through all by discs. I just browse my whole library on my computer and hit play. I wouldn't say they are full HD quality, but thats only because they are DVDs. They still look the same coming out of my tv as they would playing on my dvd player.

  • 0

Good, that puts me more at ease. I'm a big classic movie and TV show fan and they're getting harder to find nowadays. It's a miracle that a lot of them made it to DVD, but sadly, I don't think they would get released on any other format, physical or digital.

  • 0

Just at a complete loss to how you think a conversion means loss of quality - comes down to how your converting it.. That dvd of your yours is just digital file on a optical media vs a digital file on a hdd or a ssd, or a br or a compact flash or whatever the next form of storage is.

You do understand that some of your BR are in h264 - br players must support 3 format h262 mpeg2, and h264 mpeg4 and smpte VC-1 and the producer of the br can use which ever one they want. If they go the mpeg4 avc or VC-1 route they can get about twice the run time on the same br single layer 25GB bd-rom.

I understand what your doing, I understand the recording to the dvd of your input, and even keeping this copy as backup. What I don't understand is the re burning to disk again.. When you could just use the digtial media file on larger storage and access it like a library vs having to swap in disks back and forth.

Your like the guy that didn't want to get away from floppy and go hard when hard could store so much more! ;) You have everything arranged in your stacks and stacks of floppies and could not understand that its much easier to just put all those files on 1 disk vs many and be able to access anything instant.

This is the point I have been trying to make the whole thread. Your file is digital on your DVD or on your BR, I am just suggesting that store then on one big disk vs a bunch of little ones. As to the container your mpeg be it 2 or 4 file is in -- how does that change the quality?? It DOESN'T unless you tell it to - if you want to continue to use mpeg 2 --- go for it. You just might want to put it in a different container - say mkv vs some container meant to be understood by standalone players.

The container can store the video or audio streams in whatever format or quality you desire. Now myself change over to mpeg4 vs mpeg2 because its a more efficient compression format. You do understand that mpeg2 is lossy compression as well.. mpeg4 is just more efficient at it than that older format.

If you loosing quality in converting the stream from mpeg2 to mpeg4 it in how your doing the conversion and what settings you pick for the new file. Sure if you pick a lower bitrate its quite possible to see loss of quality, not the process in general or the new format that is causing the loss in quality.

btw: I am a huge fan of the classics myself. I have few jack benny and burns and allen and some abbot and costello dvds I picked up on the bargin bin at walmart. Have then sitting here on my desk waiting to be ripped.. Because I sure an the hell am not going to go looking for these disks when I want to play them. Get up off my couch find the things, open up the container and then put them in some player then back to the couch, etc. When I can simply browse my library and click play on the file I want to watch ;)

And I have a growing collection of humphrey bogart films, some of which are not that good of quality because they were ripped from vhs copies that were recorded off tv. So yes I would be happy to pick them up in a remastered br if it was available, etc. But then I would rip it and put in my library for ease of access.

edit: Its been mentioned already I do believe but makemkv is one example of just changing the container. It pulls the mpeg2 stream and audio streams from your dvd and puts then in the mkv container. It doesn't alter the streams in anyway. Just puts them in a different container. If you think there is loss of quality in that process your not understanding the process.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Go for a Echo Dot or Pop instead. These Echo shows just advertise to you.
    • NetSpeedTray 1.3.3 by Razvan Serea NetSpeedTray is a lightweight, open-source Windows network monitor that shows live upload and download speeds directly on the Taskbar. Designed for efficiency, it quietly sits in the system tray, conserving CPU and battery with dynamic updates. It blends seamlessly with Windows 10/11, adapts to light/dark themes, and auto-positions to avoid overlaps. Features include accurate interface detection, customizable display, optional mini-graph, color coding, granular font and unit control, detailed per-interface history graphs, safe data management, and easy CSV export—bringing the network monitoring Windows forgot. NetSpeedTray key features: Lightweight & Efficient Runs quietly in your system tray without consuming resources. Features a "Dynamic Update Rate" that lowers refresh frequency when the network is idle to save CPU and battery life. Native Look & Feel Blends seamlessly with Windows 10/11 UI. Smart detection for light and dark taskbar themes ensures text is always visible. Intelligent & Adaptive Positioning Automatically finds empty space next to your system tray and shifts to make room for new icons, preventing overlaps. Seamless OS Integration Behaves like a native Windows component. Hides instantly with auto-hiding taskbar Hides when a fullscreen app is active Smart Network Monitoring Accurate by Default: Auto mode identifies your main internet connection and ignores noise from VPNs or virtual adapters. Easy Interface Selection: Switch effortlessly between Auto, All, or Selected network interfaces via intuitive radio buttons. Total Visual Customization Free Move Mode: Unlock and place the widget anywhere on your screen. Optional Mini-Graph: Real-time graph of recent network activity with adjustable opacity. Color Coding: Customize colors and speed thresholds to quickly see network status. Granular Display Control Text & Font: Adjust font family, size, weight, and alignment. Units: Automatic (B/s, KB/s, MB/s) or fixed Mbps display. Precision: Set decimal places and always show them for uniform appearance. Detailed & Intelligent History Graph Smart Scale: Logarithmic scale shows low-level traffic and large spikes clearly. Per-Interface Filtering: View speed history for specific adapters (Wi-Fi, Ethernet, VPN). Safe & Efficient Data Management: Adjustable retention, automatic cleanup, optimized database. Easy Data Export: Export raw data to .csv or save high-quality graphs for reports. NetSpeedTray v1.3.3: The Updater Fix A stabilization release that repairs a critical regression in v1.3.2: the app shipped without OpenSSL, which silently broke every HTTPS request — including the built-in update checker (the "Could not check for updates" error many of you hit). This release restores it, hardens the build so it can't happen again, and fixes a startup crash plus four other reported bugs. Changes: Fixed update checking — Resolved a critical issue that prevented the app from checking for updates ("Could not check for updates"). Fixed startup crash with Auto-Cycling — The app no longer crashes on launch after enabling Cycle display mode. Fixed incorrect network speeds on 10GbE adapters — Multi-gigabit network cards now display speeds correctly instead of being stuck at 0. Improved color coding — Default color is shown when idle, and color/threshold changes now apply immediately without restarting. Fullscreen visibility fix — The widget now correctly stays visible over fullscreen apps when Keep Visible is enabled. Improved AMD Ryzen temperature detection — More reliable CPU temperature monitoring for Ryzen processors. Cleaner upgrades — Installer now removes outdated application files during upgrades, preventing DLL/version conflicts while preserving user settings. Improved stability — Fixed potential DLL loading issues by excluding critical OpenSSL and NumPy components from UPX compression. Better settings window — Scrollbars removed and layout improved for a cleaner experience. Localization improvements — Updated translations and completed missing UI text across all supported languages. More reliable releases — Added regression tests covering recent critical fixes, bringing the test suite to 196 passing tests. [full release notes] Download: NetSpeedTray 1.3.3 | 87.9 MB (Open Source) Download: NetSpeedTray Portable | 101.0 MB View: NetSpeedTray Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Why Delta Chat is the best decentralized messenger you have probably never tried by Paul Hill There is no shortage of messaging apps out there; we have WhatsApp, Messenger, and Telegram, just to name a few. While Meta has taken steps to incorporate encryption into Messenger and WhatsApp, they still leave a lot to be desired. If you are in the market for a messaging app that promotes security, privacy, and optional anonymity, you'll want to read what I have to say about Delta Chat. For those not familiar with Delta Chat, rather than relying on centralized servers as you do with Facebook Messenger, it relies on email. Essentially, it is a chat interface that feels like a messaging app, but secretly in the background, it is firing off emails. In the past, you used to have to sign in with your email account. When you sent messages to people, it would just be sending encrypted messages to their inbox, which their Delta Chat client would decrypt. When I first learned about Delta Chat, it required users to sign in with an email account, but I was pleasantly surprised upon trying it in 2026 that this is no longer a requirement, or the preferred method was to use the app. Recently, I’ve tried UAD-ng on my old Nokia 3.4 to disable most of the Google apps because the bootloader is locked, and this is the next best option. While finding replacement apps in F-Droid, I came across Delta Chat again, and it has undergone quite a big change since I last used it, with its new chatmail relays, which no longer require you to sign in to your own email account, providing anonymity, and they offer greater security. Android and Desktop Delta Chat apps. Not only does it run on my de-googled phone, but it also works on desktop computers and iOS, making it truly ubiquitous. For me, Delta Chat is a wonderful alternative messenger because it gives you more control. It supports switching between different profiles, which you can set up super quickly; you don’t register a username, you don’t register a password. The only thing you do have is a random string email address on a chatmail relay (which you don’t have to memorize). To maintain access to your profile, you just need to add a second device to your account via QR code or make a backup of your account, which you can restore later. Fail to do these, your account is gone - as it should be if you don’t want to leave accounts that could get hacked later on. My decision to block Google stuff on my Nokia was done for practical reasons; the device sucked when it launched, and it sucks even more now. The nice thing about F-Droid and the apps within is that they’re usually lightweight, free of bloat, and work well on that device. What was inconvenient for me was that it was hard to send messages from that device, say if I wanted to copy a code over to my main phone or send family members a link from that device. That’s when I decided to look at the available chat apps and saw Delta Chat. Another nice thing about Delta Chat is its notifications. Some messaging apps rely on Google’s ecosystem for notification transport on Android; however, with Delta Chat, it can use Google’s solutions if you have Play Services or MicroG installed. Otherwise, it is able to keep a background connection to the chatmail relay server so that you can get notified when you receive a message. As free software, the code of Delta Chat is open for all who want to take it and build upon it. In the future, if the developers of Delta Chat make a catastrophically bad decision and take the app in an undesirable direction, users can take the code and fork the project. This contrasts with closed-source apps from corporations that can take their products in any direction they like. By relying on free software instead of closed-source programs, you actually control your computing. I’ve spoken at length about how running this type of software is like owning your own home rather than renting it. The same applies here; if you use Delta Chat, you don’t need to worry about it going away in the future. Whether it is Telegram, WhatsApp, or Messenger, you are required to register a username and password to use these services. A major flaw in this design is that anyone can try various passwords and potentially break into your account with your complete chat history intact. Sure, there is encryption in Messenger, where you need a second PIN and two-factor authentication in Telegram, but breaches happen all the time. Unlike before, when you used to sign in to your email account to send and receive messages, the primary way to do it now is to create an account on a chatmail relay. The resulting email address is a random string followed by the name of the relay you pick. This means you can start and begin adding contacts Without a username and password, you either need to ensure you have a backup or at least one device running your Delta Chat profile. The primary way to log in on another device is to go to the settings and add a second device. Then, you’ll just scan a QR code with your new device, and it’ll log in to your account and sync all your chat history and contacts. To end users, Delta Chat just looks like any instant messenger; however, it is really sending your messages as encrypted emails to your contact. This is pretty cool from a censorship perspective, as it makes the service more difficult to block. Previously, the main way to use the app was by logging in with email, but nowadays, it’s recommended that you use chatmail relays. Chatmail relays temporarily hold messages in case your device is offline. They are cheap, simple servers that don’t store data as group states. Other information, like your name and avatar, only exists on your device and the devices of those you share your contact information with. The relays are also decentralized and operated by various groups and individuals. It is even possible to set up your own chatmail relay, but most people will want to use one hosted elsewhere. To keep your messages secure, Delta Chat uses a secure subset of the OpenPGP standard that gives you automatic end-to-end encryption. It also uses Secure-Join to exchange encryption setup information through QR-code scanning or invite links. Autocrypt is also used to automatically establish end-to-end encryption between contacts and all members of group chat, but sometime this year Autocrypt v2 will be rolled out, bringing post-quantum resistant encryption and forward secrecy. The Delta Chat FAQ is an interesting read that explains many more details about the app. Credit: Pexels Delta Chat is unique among messaging apps because it is built on email, a technology that’s decades old and isn’t going anywhere soon. What’s more is that email is not centralized either, so it’s far more difficult for any authoritarian regime to disrupt the Delta Chat app. I haven’t spoken too much about features yet, so I will do that now. Delta Chat allows you to do one-on-one chats, group chats, and create channels. It also supports file sharing and making audio and video calls when chatting one-to-one, but it’s not available for group chats right now. At the time of writing, the calling functionality is disabled and can be enabled in Settings > Advanced > Debug Calls. I have used the video calling feature, and the quality is excellent. It works over WebRTC, another open standard. The app also lets you send voice notes, enables disappearing messages, and has its own app ecosystem. I did try playing chess one time there, but it was a bit spotty; though, we did manage to complete the game with a victory for me. To add people to Delta Chat, you can either give them your Delta Chat link or your QR code to scan. These are the only ways to add users, so you won't have any spam bots bothering you. If the people you want to chat with don't have the app yet, just send them your link, and it will take them to a webpage where they can install the app and then add you. It's really quick for them to install it and get started, which is nice. Credit: Microsoft. The Majorana 2 quantum chip unveiled in 2026. I do not think quantum computers are too far out now, and I do hope that Delta Chat is able to push out Autocrypt v2 sooner, rather than later, so bad actors do not attempt to collect encrypted communications and then decrypt them in the future using quantum computers. By getting people’s messages post-quantum-safe now, users won’t have to worry when quantum computers start cracking legacy encryption. Overall, I would recommend this app to people who are already past WhatsApp and Messenger and have perhaps begun using apps like Telegram or Session. It shares a lot of characteristics with these apps and goes a lot further than Telegram in terms of security. By being based on email, it is also resistant to censorship, and the lack of a username and password makes you anonymous (if you want to be) and safe from brute force password cracking attempts. Let me know in the comments if you’ve tried Delta Chat recently. Do you think it's a good bulwark against governments that are tightening their grip on the internet?
  • Recent Achievements

    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
    • Week One Done
      tuben earned a badge
      Week One Done
    • First Post
      OffsetAbs earned a badge
      First Post
    • Reacting Well
      OffsetAbs earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      474
    2. 2
      +Edouard
      220
    3. 3
      PsYcHoKiLLa
      156
    4. 4
      Steven P.
      73
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!