Recommended Posts

Why did you run testdisk? It is designed to recover your partition table. By virtue of the fact that Ubuntu still boots from the same hard disk, the partition table is probably OK. Even if it wasn't, you should NEVER use testdisk to modify the partition table on your system disk! Can you elaborate on why Vista is not booting? It might be more productive if we started this discussion from there.

Might run Fix BOOT from Vista command prompt:

http://www.proposeds...covery-console/

Nevermind , that's gone from Vista -- probably need to do a Repair install of Vista.

Save, back-up important personal files first.

In order to start the Windows Recovery Environment you must boot your computer off of the Windows Vista DVD that you purchased or that came with your computer. To start this process, insert the Vista DVD into your DVD drive and turn your computer on. Your computer will start and you should see your BIOS listing your hardware and other information.

http://www.bleepingc...startup-repair/

The Windows Vista disc can fix a lot of startup issues. Though honestly it's not clear what the problem is on your end, you haven't mentioned any errors, or even what happens when you attempt to start Windows on your computer.

The Testdisk output seems to indicate that all your partitions are there, but like xorangekiller mentioned you probably don't need Testdisk unless you specifically have an issue with your partitions(s) or need to recover data off the hard drive.

I ran Testdisk because I thought there might be a problem with the Windows partition on the hard disk (I'm a novice). I get different behavior when I try to boot Vista. Sometimes I'm forced into a chkdsk that never finishes. Other times, the desktop loads, but if I click anything, the machine just hangs. I have to force shutdown with the power button.

Vista came already installed on the computer and I don't have a repair disk.

Not much you can do then.

I think it's clear that your Vista partition is messed up.

Maybe you can borrow a Vista dvd from someone to repair it.

I don't know if something like Partition Magic would help.

Example:

http://www.partition-tool.com/

It sounds like your hard drive may be developing problems. Is Ubuntu installed on the same hard drive or a different one? If its on the same one, is it slow to boot or does it report any disk I/O errors?

In Ubuntu, open Disk Utility, select your hard disk, and click "SMART Data". That should tell you whether the hard drive is physically having problems (most likely developing bad sectors by your description), or the issue lies elsewhere. Particularly pay attention to the "Read Error Rate", "Reallocated Sector Count", "Seek Error Rate", and "Current Pending Sector Count". Those are the most likely attributes to indicate a problem. DON'T GO BY THE OVERALL ASSESSMENT! It will often say "Disk is Healthy" unless your disk is in VERY bad shape.

Also, testdisk is an expert tool. You definitely shouldn't be using it if you're not sure EXACTLY what you're doing. While it can be used to recover from complex failures, it can also very easily be used to cause damage that is difficult to repair.

You're right Hum; I forgot the OP said it is a laptop. He may have two hard disks in his laptop, but its very unlikely. I should have assumed that Ubuntu is installed on the same disk as Vista. Consider my previous post amended accordingly. (I can't edit it anymore.) My main point and instructions are still valid, though. In context, its a fairly trivial detail.

Bad sectors are "reparable" in some cases. Your hard disk has a reserved area where a very small number of sectors can be remapped. However, if a sector cannot be remapped, either because the reserved space is full or for some other reason, then its time to backup your data and get a new hard drive.

Try running HDAT2 to repair the bad sector. After it completes, reboot back into Ubuntu and check the "Current Pending Sector Count" in Disk Utility again. If it has dropped to zero, make sure there are no other errors reported by SMART, and try starting Vista again. Even if all the bad sectors have been repaired, its likely you will have to run chkdsk on your Windows partition before it will boot.

Thanks for your help! Here's the result of Disk Utility...looks like bad sectors. Is this the end for my laptop? Will the Ubuntu side die eventually too?

You should really back up your data ASAP. The more you use the laptop the more bad sectors you're going to get.

Back up the data onto a USB drive or something similar. Ubuntu & everything else on the hard drive will eventually be unreadable.

The laptop itself is fine, you'll just need to have a new hard drive installed & then re-install Windows/Ubuntu from scratch.

It is definitely a good idea to backup your important data - which you should be doing regularly anyway - but a couple of bad sectors does not automatically mean the end of your hard disk. It is sometimes possible to remap bad sectors and for the disk to be completely usable for years after. However, the fact that your disk somehow developed bad sectors does make it more likely that you will get more, even if the ones you have can be remapped. If this is your primary computer, I would recommend preemptively ordering a new hard drive for it. Otherwise if you don't rely on it every day, I would wait to see if the sectors can be remapped before ordering a new disk.

This topic is now closed to further replies.
  • Posts

    • Same Internet Archive seemed to grab the new version https://web.archive.org/web/20...d/Setup_MakeMKV_v1.18.4.exe Here's the link to an additional file it periodically downloads https://web.archive.org/web/20260213092148/https://www.makemkv.com/sdf.bin I think update's keys, etc. To manually trigger this update, put the sdf.bin file in the root of where the program is installed. When you launch the program it will pick up the file and import it. Typically put it here: C:\Program Files (x86)\MakeMKV\sdf.bin
    • Windows 11 KB5094126, KB5093998 bugging out Office apps but it may not be Microsoft's fault by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. Although the tech giant did not acknowledge any major problems, some users online reported various issues ranging from OneDrive and Dropbox access problems, BitLocker recovery lockouts, to blue screens and BSODs. You can read about them in this dedicated piece. While there is still no confirmation about those problems from Microsoft the company has admitted to another bug which we did not report on. The tech giant has confirmed it has received reports of an issue in which certain third-party applications may be unable to launch Microsoft Office apps or open Office documents after installing the Patch Tuesday. This affects both Windows 11 as well as Windows 10. The company says the problem impacts a subset of applications that rely on OLE (Object Linking and Embedding) automation to communicate with Microsoft Office programs. According to Microsoft, affected scenarios involve third-party software attempting to open Office applications or documents from within their own interface. In such cases, the Office program may fail to launch altogether, or the requested document may not open. Oddly there may not be any error message, which probably makes the issue difficult to diagnose. The bug affects several Office products, including Word, Excel, PowerPoint, Access, and other apps in the Microsoft Office suite when they are launched through the affected software. These include tax and accounting software such as CCH Engagement and Workpaper Manager, dental practice management solutions like Dentrix and Softdent, as well as the popular research and reference management tool Zotero. Microsoft adds that other applications using similar Office integration methods could also experience the same problematic behavior. To understand the issue it is important to look at OLE, the Microsoft technology involved. OLE allows different applications to work together and share data, while its Automation feature lets one program control another. Thus this enables third-party software to launch Microsoft Office apps, open documents, and perform tasks automatically without requiring users to switch between programs. Because many accounting, healthcare, research, and business applications rely on OLE automation to interact with Word, Excel, PowerPoint, and other Office apps, any disruption can break those workflows. As a result, affected software may be unable to open Office documents or launch Office applications even though the programs themselves continue to work normally. At the moment the company has not provided a permanent fix though it has confirmed that engineers are actively working on a resolution, which will be delivered through a future Windows update. As such additional details will be shared once more information becomes available. In the meantime, Microsoft recommends a simple workaround for affected users whic is to open the Office application or document directly rather than launching it through the third-party program. For enterprise customers and organizations managing larger deployments, Microsoft says an additional mitigation is available. Admins experiencing the problem on their managed devices are advised to contact Microsoft Support for business to obtain and apply the workaround.
    • It saddens me when cars are such dull colours now. Mine is bright metallic blue and I absolutely adore it for standing out in contrast to that depressing backdrop of traffic.
    • Sparkle 2.20.0 by Razvan Serea Sparkle is a free, open-source Windows optimization tool designed to make your PC faster, cleaner, and more private. With Sparkle, you can easily debloat Windows by removing unnecessary apps and services, disable Microsoft tracking to enhance privacy, and apply performance tweaks to boost speed. Its cleaner removes junk and temporary files, while every change is safe and fully reversible. Sparkle also features a modern, user-friendly interface with automatic updates, making system maintenance simple. Explore over 39 tweaks, from disabling telemetry and hibernation to optimizing network and game settings, all aimed at customizing and enhancing your Windows experience. Sparkle supports Windows 10 and 11. Sparkle 2.20.0 changelog: Debloat Tweak has animated border New homepage loading UI New Tweak Modal (Markdown Supported) Refactored GPU Detection Added Tests with vitest Added foobar2000 to apps Added Localsend to apps Updated Modal Styles Added styles for disabled inputs Added Animated Border to debloat-windows tweak Bumped dependencies Refactor System info logic for speed Tweak info modals now support Markdown Added Clear System info cache to settings Redesigned Home Page Loading UI Changed Some Icons around the app Download: Sparkle 2.20.0 | Portable | ~100.0 MB (Open Source) Links: Sparkle Website | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • lol it was a typo, fixed! haha imagine an actual 4TB Gen4 NVMe for $40 in 2026
  • Recent Achievements

    • Reacting Well
      Dys Topia earned a badge
      Reacting Well
    • Conversation Starter
      NovaEdgeX earned a badge
      Conversation Starter
    • One Year In
      Console General earned a badge
      One Year In
    • Week One Done
      Twozo Technologies earned a badge
      Week One Done
    • One Month Later
      Twozo Technologies earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      517
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      106
    4. 4
      Steven P.
      88
    5. 5
      ATLien_0
      68
  • Tell a friend

    Love Neowin? Tell a friend!