Recommended Posts

Hey guys, I am thinking of getting an SSD drive to speed up my PC as the hardware in it is getting a little old now and I don't currently have the money to build a new one (which is my main goal) so I want to get an SSD just now to give a boost and when I do build a new machine, it will also be used in that.

The thing is, I just checked and my Program Files (x86) folder is 360GB and my Program Files folder is 15GB.

The SSD i am looking at is only 120GB so how do you go about that? Do you prioritise which programs are installed on the SSD. Can you even install programs to another drive from the main windows drive? I'd love a bigger one but they are just too expensive for me at the moment. 120 is about the biggest I can afford. I'm looking for under ?100 on eBuyer, unless anyone else knows of anything bigger for that price.

edit - I have found a 256GB for ?130 which I may be able to stretch to. Still won't hold all my programs though so still wondering all points asked here.

I currently run two 1TB drives (which are both 80% full) but I've only ever installed windows and all the programs on one, I thought installing programs on another drive would cause problems?

Also, my Mobo has Sata2 but my PSU only has 2 sata power connectors, it was built during the crossover time. My current HDD's both have 4 pin molex and sata power connectors but both use sata data cables.

Does the SSD need a mini sata (don't know the name, I'm new to SSD's so im just guessing here) connector as it says 7 pin and I thought sata was 15. If it does then can I get molex to mini sata and keep my two current HDD's as-is or do I get Sata to mini-Sata and use a molex in one of my current drives.

Also want to ask, can I migrate my current windows install to another HDD, is that easy or should I just start fresh? My current install is only 4 months old and I have ALOT of installed software and games, I'd hate to have to install everything again. If I could migrate, can I migrate only some software. This may be an issue but all my programs wouldn't fit lol.

Lastly my mobo has SATA2 3.0 Gb/s connectors, but the SSD I am looking at says "1 x Serial ATA-300 - 7 pin Serial ATA" and "SATA Revision 2.6" is that compatible? Is Sata-III backward compatible? If so, would I be better getting that so when I come to build my new pc, my SSD is of the newer standard and my new mobo will be able to benefit from the higher speed.

Sorry if this post is confusing, tried to fit a lot of questions in :)

Link to comment
https://www.neowin.net/forum/topic/1133030-ssd-storage-program-files/
Share on other sites

Installing programs onto a non system drive is fine. I have done it in the past to keep my SSD free if its a program I don't use much / am not bothered about the speed of it.

The data cable is 7 pin, the power connector is 15 pin. So no, its a normal SATA connector. Don't really understand the last bit of that question but if your PSU has a SATA power connector and molex, you can either use the proper SATA power connector or use one of the molex connectors with a converter (drives / mobos often bundle these with them).

I wouldn't try to migrate to another drive. You would be best to reinstall onto your SSD when you get it.

Yes, SATA3 is backward compatible so yes I would get SATA3 now if you are intending on upgrading in the future.

Installing programs onto a non system drive is fine. I have done it in the past to keep my SSD free if its a program I don't use much / am not bothered about the speed of it.

The data cable is 7 pin, the power connector is 15 pin. So no, its a normal SATA connector. Don't really understand the last bit of that question but if your PSU has a SATA power connector and molex, you can either use the proper SATA power connector or use one of the molex connectors with a converter (drives / mobos often bundle these with them).

I wouldn't try to migrate to another drive. You would be best to reinstall onto your SSD when you get it.

Yes, SATA3 is backward compatible so yes I would get SATA3 now if you are intending on upgrading in the future.

the bit you didn't get was because I thought the SSD used mini sata, my PSU has only 2 sata power connectors, both are being used.

But I can use one for my SSD and then use a molex to power my other HDD since it has a molex plug too. :)

Thanks, answered all my questions :)

how did you amass 375 gigs of programs?!?!?

yeah I have like 50 games :laugh:

pic related and thats not them all, I started doing them with oblytile but got bored so haven't finished them all yet. Plus i wanted them to be a square and not have unfinished columns

post-147642-0-87326200-1359296139.jpg

I have a 120GB SSD for my system drive and I've never had a problem with size (though obviously I've love to have a bigger drive). Obviously if you can stretch for a 256GB drive - like the OCZ Vertex 4 - then go for it

You just have to be sensible. I install all my regular programs on the SSD but keep anything that is storage intensive on HDDs - for instance, my Steam folder is over 1.6TB (1,600GB) and I have over 300GB in sampled instruments. Even if I wanted to keep them those folders on SSD there isn't any drive big enough on the market and it would cost ?1,600 to setup a four-drive SSD RAID array. You should keep all your documents and media files on regular HDDs, which is good practise anyway given the risk of boot-drive failure or corruption. Basically, use your SSD for installing regular programs (Office, Adobe Creative Suite, Cubase, iTunes, etc) - that way you get all the performance, without the huge expense.

I have a 120GB SSD for my system drive and I've never had a problem with size (though obviously I've love to have a bigger drive). Obviously if you can stretch for a 256GB drive - like the OCZ Vertex 4 - then go for it

You just have to be sensible. I install all my regular programs on the SSD but keep anything that is storage intensive on HDDs - for instance, my Steam folder is over 1.6TB (1,600GB) and I have over 300GB in sampled instruments. Even if I wanted to keep them those folders on SSD there isn't any drive big enough on the market and it would cost ?1,600 to setup a four-drive SSD RAID array. You should keep all your documents and media files on regular HDDs, which is good practise anyway given the risk of boot-drive failure or corruption. Basically, use your SSD for installing regular programs (Office, Adobe Creative Suite, Cubase, iTunes, etc) - that way you get all the performance, without the huge expense.

thanks for the tips, holy crap I thought my game files were large! haha

So its not worth putting games on an SSD? Even if you could? Like just say a certain game you really liked, would it improve performance of the game at all?

thanks for the tips, holy crap I thought my game files were large! haha

So its not worth putting games on an SSD? Even if you could? Like just say a certain game you really liked, would it improve performance of the game at all?

The games you put on the SSD will load a lot faster, so put your most played ones on there. Any music or videos won't get a performance boost on a SSD, so keep those on your other HDDs.

And if you need another SATA power connector, there are lots of adapters out there to choose from:

035462e496f1a1c50f4d9304f875f2f910318.jpg

I keep all of my data... Games, music, video files, ETC on my data drives. I have a 60GB SSD and all that I install onto it is Windows, Office, web browsers, and other basic apps like CD burning and my system utilities.

[snip]

And if you need another SATA power connector, there are lots of adapters out there to choose from:

[snip pic]http://www.xpcompute...75f2f910318.jpg

Thanks yeah those were the connectors I was talking about. Guessing they are just as good as a normal connector?

By that I mean that the power throughput is the same and is sufficient enough?

If so, why do they always change adapters, if it does the same thing whats the point? other than being slightly smaller

thanks for the tips, holy crap I thought my game files were large! haha

So its not worth putting games on an SSD? Even if you could? Like just say a certain game you really liked, would it improve performance of the game at all?

Now that Steam has the option to install individual games to different locations it's possible to do that, though it's too much hassle for me. But yes, it would improve loading times significantly - it might also reduce framerate dips but generally it won't have much?if any?impact upon your framerate.

If so, why do they always change adapters, if it does the same thing whats the point? other than being slightly smaller

To make them smaller and easier to use - it's progress. All modern PSUs have had plenty of SATA power connectors for years and it's easy to get adaptors if you need them.

Thanks yeah those were the connectors I was talking about. Guessing they are just as good as a normal connector?

By that I mean that the power throughput is the same and is sufficient enough?

If so, why do they always change adapters, if it does the same thing whats the point? other than being slightly smaller

Yeah those molex connectors are harder to connect and the pins tend to fall out when they get used enough. I was never a fan of them.

The power throughput is the same. It's just a different form factor.

The downside, however, is that a lot of SATA cables still don't have clips on them which makes them annoyingly easy to knock loose.

Yeah I was thinking exactly that, my Molex connectors feel better when they are plugged in and don't come out nearly so easy. Its why I asked the reason for SATA ones if they do the same job then apart from being bigger the molex one seems better to me.

If I just more the sata one ever so slightly it will fall out of my HDD. I actually used a cable tie to make sure it won't come out if my computer gets a knock

This topic is now closed to further replies.
  • Posts

    • Hello, It would appear so, according to https://finance.yahoo.com/news/how-to-hide-your-home-on-google-maps-apple-maps-204146687.html. Regards, Aryeh Goretsky      
    • Hello, The Nvidia Founders Edition 3080 video card is approximately six years old, correct? Have you looked into whether replacement fans are available for it? Perhaps replacing those will improve cooling, especially when combined with cleaning the card's heatsink and replacing the thermal interface materials. Regards, Aryeh Goretsky  
    • Hello, While ~104 GB of space may seem generous (at least compared to other e-readers which have 8-32GB), I feel at this price point the device should have a Micro SDXC card slot for expansion, particularly if it allows audio books to be installed and played. I hope to see more reviews of 6" phone-sized e-readers on Neowin in the future. It will be interesting to see how they compare. Regards, Aryeh Goretsky
    • Sandboxie Plus 1.17.8 / Classic 5.72.8 by Razvan Serea Run programs in a sandbox to prevent malware from making permanent changes to your PC. Sandboxie allows you to run your browser, or any other program, so that all changes that result from the usage are kept in a sandbox environment, which can then be deleted later. Sandboxie is a sandbox-based isolation software for 32- and 64-bit Windows NT-based operating systems. It is being developed by David Xanatos since it became open source, before that it was developed by Sophos (which acquired it from Invincea, which acquired it earlier from the original author Ronen Tzur). It creates a sandbox-like isolated operating environment in which applications can be run or installed without permanently modifying the local or mapped drive. An isolated virtual environment allows controlled testing of untrusted programs and web surfing. Sandboxie is available in two flavors Plus and Classic. Both have the same core components, this means they have the same level of security and compatibility. What's different is the user interface the Plus build has a modern Qt based UI which supports all new features that have been added since the project went open source. The Classic build has the old no longer developed MFC based UI, hence it lacks support for modern features, these features can however still be used when manually configured in the Sandboxie.ini. Sandboxie Plus 1.17.8 / Classic 5.72.8 release notes: Added added DisableCustomTitleOpt=[process,][y|n] to allow [#] sandboxie title markers on custom-titlebar windows (Delphi VCL, Qt, Electron) that were previously skipped to prevent DWM repaint CPU loops #5387 Changed updated bundled ImDisk driver to 3.0.2 #5419 Fixed fix Suppress logs for expected non-user SIDs #5422 SbieSvc.exe: SBIE2218/2219 error when run program as administrator #5417 fixed explorer.exe crashes in Application Compartment when Huorong Security is installed #5423 Download: Sandboxie Plus (64-bit) | 23.5 MB (Open Source) Download: Sandboxie Classic (64-bit) | 3.0 MB Links: Sandboxie Website | GitHub | ARM64 | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Hello, Christian Maas' XVI32 is a nice (and very small) hex editor. Speaking of hex editors, many years ago a colleague and I who both worked at Tribal Voice managed to edit a copy of the company's PowWow instant messaging client to make it behave better now that all of its lookup servers and other server-side tech was gone.  The program didn't support NAT (RFC-3022 was introduced in January 2001, the same time Tribal Voice was shuttered), but it still worked okay if you manually set up port-forwarding on your router.  The server at http://powwow.jazy.net/ hosts a copy (usual warnings about downloading and running untrusted code from random internet servers apply). I occasionally use some tools like Funduc Software's Search and Replace and Application Mover when I need to make mass-edits to text-based files or move programs with a hard-coded installation directories, respectively.  When I need to figure out the exact LCD panel inside of a laptop, EnTech Taiwan's Monitor Asset Manager is my go-to tool for that purpose. JD Design's website (now hosted on github.io) has a number of interesting freeware and shareware utilities.  I used to use their TouchPro utility to set the file timestamps on software I was mastering to match its version number (e.g., version 3.00 of a program had all of its files dates set to 3:00AM, and so forth). Karenware has a number of interesting freeware utilities, too. Regards, Aryeh Goretsky  
  • Recent Achievements

    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      138
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      82
  • Tell a friend

    Love Neowin? Tell a friend!