Is my motherboard dead?


Recommended Posts

I recently moved my old components into a new tower for my mother in law. I formatted her HD, installed Win 8, everything went perfectly well. She was using the computer for I'd say two hours or so when all of a sudden she saw a message that Windows was shutting down. Once this happened, she tried to turn the PC back on but no luck. I turned it on, it came on for about 3 seconds, not even long enough to post, all 4 phase LEDs lit up. No beeps. I tried a different PSU, same thing. Here's what I do know: The fan on the aftermarket CPU heatsink wasn't spinning. I actually plugged it in to another fan connector to get it going. So she was using the Q6600@ stock speeds for an hour or two with a Xigmatech heatsink. Not sure if the CPU would be permanently damaged from that? I tried a different PSU and had the same result. I removed each stick of ram individually and that did not help. Removed the GPU and that didn't help. The only thing I haven't done is take everything out and reassemble the PC.

Anyways, I don't have another LGA775 motherboard hanging out around here so I thought I'd ask you guys what you think it may be. I did some Google searching and the majority of results included Gigabyte motherboards...Which this is :/. And most of those boards were now out of commission.

Link to comment
https://www.neowin.net/forum/topic/1133630-is-my-motherboard-dead/
Share on other sites

Maybe your fan went bad. I know there's an option in the BIOS to shut down the computer if it fails, so maybe try a new fan. If your mobo was to truly fryed, there wouldn't have been a "Shutting Down Windows" screen--it would have just flip off. It is difficult to fry a modern processor. I'm not saying it can't be done, but it's just hard to do. Are there any lights on the mobo when you plug it in?

Edit: Whoops! sorry! I'm a horrible multitasker. That's so posed to go in the random pics thread. :woot: Again, my apologies.

Here's what I do know: The fan on the aftermarket CPU heatsink wasn't spinning. I actually plugged it in to another fan connector to get it going.

Can you plug any 3 pin fan in the CPU fan header and does the fan spin?

If the motherboard detects no CPU fan that can cause it to not post.

Well, it stopped turning on altogether so I couldn't check another fan in the CPU fan connector. I removed everything, reconnected it all, turned on for a few seconds, all 4 phase LEDs lit up again, it *looked* like the CPU fan spun (I was caught off guard by it starting so frantically turned my head to the cpu fan and by then the PC shut off). I tried turning it on again, and now nothing happens. Just a quick, milisecond green phase led light flashes. I can't turn the PC on with the power switch by the way. It only comes on ever so briefly when I turn the PSU to on. Pushing the case power button does nothing. (This is with both power supplies.)

Whenever I am in a situation like you the OP (and it does happen a lot, same symptoms).

My checklist:

1- Check with a new/other PSU + check every connection also from the PSU to the Motherboard, make sure it's not some power connector that isn't properly connected (Yes it happens, sometimes we forget about the basics ;) )!

2- CPU check, while a dead CPU wouldn't shutdown the system at start, it would just give most of the times no bleeps (no POST) at start and a black screen, remove it and try to start the system without it! (Yes it won't properly start but if the system stays say 10s on you now know the CPU might also be dead or also causing problems)

3- At this point if you're looking just for the system to at least be on, remove (the connections to the board) of everything, disks, DVD's, any usb connectors, Firewire, etc.. Just have power to the board, and the the power and led's buttons of the case!

4- If it still doesn't work, sure make a reset of CMOS, etc.. But if the problem still exists you have a dead board, don't spend money on parts to try, just replace the board!

PS: Oh and yes the CPU fan spins for a second and stop's, yep I've seen before :(

Fixed!

Removed the Xigmatech heatsink, put the stock one on and...**** this is embarrassing to admit...I noticed uhh...The standoffs were not attached to the case >_>. Installed those, reseated everything, got a blue screen or two so re-installed Windows and all is well in the world!

Fixed!

Removed the Xigmatech heatsink, put the stock one on and...**** this is embarrassing to admit...I noticed uhh...The standoffs were not attached to the case >_>. Installed those, reseated everything, got a blue screen or two so re-installed Windows and all is well in the world!

Great!

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • With the current hardware prices Microsoft should lift the restriction. Then if you have the correct TPM then allow you to use X feature, if you don't have the correct TPM then don't but still actually let you run windows. 11. With a disclaimer during install that X features would be unavailable.
    • It's good for recycling of course. But commence inflation of a second hand RAM bubble and price gouging on DDR 4 inventory in 3... 2... 1...
    • Bypassed Windows 11 shows surprising stability on ancient, completely unsupported hardware by Sayan Sen When Windows 11 was first released, one of the most complained-about issues with the new desktop Microsoft OS was its higher system requirements, which pushed many relatively modern and powerful processors and devices onto the officially unsupported list. Thankfully, they have not been updated again for the base OS, though systems require four times the memory and storage if they want to run AI-powered apps and features. As such, Windows 11 technically runs on 4GB of memory, and there is no imposed restriction on the generation of memory it supports. Speaking of memory, prices are extremely high nowadays for hardware, especially DDR5 and DDR4 kits due to the current silicon shortage, and there are also reports of it affecting DDR2 as well, and it might only be a matter of time before even DDR1 gets affected. Before that could happen, an enthusiast took an ancient DDR1-based system and decided to try out Windows 11 on it to see how well the modern OS would fare on such hardware. The system runs an outdated graphics card interface standard based on AGP, or Advanced Graphics Port, called AGP 3.0 or AGP8x. AGP was essentially succeeded by the modern PCI Express (PCIe) bus standard. The user behind the experiment is retro hardware enthusiast Omores, who built the system around an ASRock ConRoe865PE motherboard based on Intel's i865PE chipset from way back in 2003, around the time when AGP was still in fashion. What made this board special back in the day was its unusual support for newer Core 2 Duo and even Core 2 Quad processors while still retaining older DDR1 memory support and an AGP8X graphics slot, making it an ideal bridge or link between two vastly different generations. Powering the machine was Intel's Core 2 Quad Q6600 alongside 3GB of DDR1 RAM and an ATI Radeon HD 4650 AGP graphics card, one of the final and most capable GPUs released for the aging AGP interface. While installing Windows 11 itself was relatively easy by bypassing Microsoft's hardware checks, getting the graphics card fully functional proved to be some challenge. Microsoft had quietly dropped native AGP support after the earliest releases of Windows 10, meaning newer versions of Windows no longer include the necessary Graphics Address Remapping Table (GART) drivers required for proper AGP acceleration. Without them, AGP graphics cards typically boot up, though with limited functionality, and can often throw a Code 43 error in Device Manager. To work around the limitation, Omores extracted Intel's legacy AGP440 SYS driver from an early Windows 10 release and paired it with a modified INF file so Windows 11 would correctly recognize the chipset. Following this and combined with AMD's final 64-bit Catalyst AGP drivers from 2012, the Radeon HD 4650 was able to operate with full AGP 8X acceleration intact. The result was said to be surprisingly usable for hardware that is over two decades old. Hardware-accelerated H.264 video playback worked correctly and benefited apps like Firefox, while legacy applications and games ran without major graphical issues. The system also successfully completed the 3DMark 2001 benchmark, although performance naturally lagged behind what the same hardware achieves under Windows 7, which is significantly lighter than Windows 11. There was, however, one unavoidable limitation as Microsoft's Windows 11 version 24H2 introduces a mandatory SSE4.2 CPU instruction requirement that cannot be bypassed through installer modifications or registry tweaks. Since no AGP-era processor supports SSE4.2, Windows 11 version 23H2 effectively becomes the final release capable of running on such systems. Regardless, it is still a very cool feat and quite fascinating to see just how stable Windows 11 turned out to be on such unfamiliar hardware. Source: Omores (Patreon) via O_MORES (Reddit)
    • That will only really help other players that are also responsible for creating the problem.
    • Well, it's good to know that they have found a workaround to a problem that they helped create, I guess...
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      538
    2. 2
      +Edouard
      266
    3. 3
      PsYcHoKiLLa
      151
    4. 4
      Steven P.
      98
    5. 5
      macoman
      66
  • Tell a friend

    Love Neowin? Tell a friend!