Stop making horrible console ports - a guide


Recommended Posts

Broken menus, wonky mouse controls, single figure framerates ? this is the familiar story of PC gaming prowess held back by consoles. We understand why it happens: console-land was where the majority of sales were, and thus the focus of development. But that reasoning has never seemed, well, reasonable: a trashy console port can knock a chunk off your Metacritic rating, sour a huge potential audience against you forever and lose you loads of sales on a platform that can be extremely lucrative if only you know how to approach it.

It?s really not that hard or expensive. After all, a pair of talented modders managed to make Dark Souls? PC version immeasurably better within the space of an evening, and while devs might not want to spend resources making hi-res assets just for PC, there?s plenty of really basic stuff that can be done to not totally **** up a game. Which, given the amount of time, love and money spent on these creations, is surely something that would please the developers and publishers as much as their beleaguered PC audience.

We?ve thrown together a list of tips, common foibles and fixes ? add your own in the comments!

Continued at source: PC Gamer

Gotta agree with the list, especially the bit about Games for Windows Live. Strange thing about Max Payne 3 and its inability to change resolution from the start - when I booted the game in Windows 8 for the first time, it picked 1280x1024 on my 1080p monitor, yet everything was still proportionally scaled. It's as if the game already knew what monitor I had, yet still put the game in 1280x1024.

  • Like 3

I like some of his points but really don't care about most of them.

I mean, yes, GfWL is not that great, but otherwise? He picks the worst examples he can find but doesn't even mention that they're not that common.

And mentioning high res textures without mentioning dx11 support is just sad.

I agree with the list too. It's a damn shame when developers don't even bother with the basics. One thing to add to that list is DX11 support. A lot of PC gamers have DX11-compatible video cards. Why not take advantage of it? Or at least anything beyond DX9 (e.g. DX10/10.1).

  • Like 1

Deranged is a bit obsessed with DX11.

Adding DX11 features to a game is a major undertaking. This post was about getting the basics right and making ports decent. You don't need to add DX11 to make a port decent.

I agree with him in places, there needs to be a balance, let PC versions have optional extras that can be enabled if your PC can handle them. What annoys me with certain people who bitch about games is the Elitist PC Gamer who has an insane Rig that can run anything bitches that games dont stress his PC. They want games to be so advanced without realizing that it'd cost an insane amount to develop that game and it'd only run on maybe 10% of PCs.

The first Crysis made such a horrible loss they had no choice but to develop the 2nd one for consoles too.

Deranged is a bit obsessed with DX11.

Adding DX11 features to a game is a major undertaking. This post was about getting the basics right and making ports decent. You don't need to add DX11 to make a port decent.

And yet very little of that screamed 'THIS IS A HUGE DEAL THAT DESERVES OUTRAGE' to me. It screamed more 'we're a bunch of whiners.'

If you're not going to use PC tech that's been available for four years OR the stuff that's been available for seven, why bother making a game for the PC in the first place? Keep it on the consoles.

The good sort, obviously.

I'm not sure where you're going with that. Am I personally on a crusade to make every developer stop making PC games? No. I'd just prefer them to focus on quality over useless crap like these articles would suggest is a huge deal.

The developers care. They're human, they want to be proud of a project they've released on whatever platform it may be.

But the money's just not there for the executives, and you cannot blame them. Consoles, aside from being high on sales, are also secure sales. That means reduced piracy,

Ask yourself as an executive, not as a gamer, why would you put effort into implementing your own matchmaking services and servers, custom options and aspect ratios, new textures and maps, new content maybe, testing out new button mappings and hundreds of different hardware configurations, finding new publishers. Most likely, you're just releasing a PC version because you used a PC to develop the game and you have a beta lying around somewhere.

  • Like 3

The developers care. They're human, they want to be proud of a project they've released on whatever platform it may be.

But the money's just not there for the executives, and you cannot blame them. Consoles, aside from being high on sales, are also secure sales. That means reduced piracy,

Ask yourself as an executive, not as a gamer, why would you put effort into implementing your own matchmaking services and servers, custom options and aspect ratios, new textures and maps, new content maybe, testing out new button mappings and hundreds of different hardware configurations, finding new publishers. Most likely, you're just releasing a PC version because you used a PC to develop the game and you have a beta lying around somewhere.

this is the problem, its a shame but its the truth.

Money is just not in it for developers on PC. NONE of my friends play on PC, yet every single one of them has atleast one console and loads of games. Thats the exact reason I bought a console too, was to play with friends. (i sold it eventually but that's off topic)

I'd love it if PC games utilised the hardware and capabilities but until the consoles bump it up, that wont happen. Hopefully when the next gen consoles come out then the PC games and ports will improve too.

Ask yourself as an executive

As soon as I become an executive I'll do that.

Instead I'll ask myself as a gamer what games I feel like spending money on and do that. Halfassed PC games do not qualify.

I'll note that every major publisher except Zenimax and Sony does have DX11 games out there, so the transition is well underway and I have few complaints left.

As soon as I become an executive I'll do that.

Instead I'll ask myself as a gamer what games I feel like spending money on and do that. Halfassed PC games do not qualify.

I'll note that every major publisher except Zenimax and Sony do have DX11 games out there, so the transition is well underway and I have few complaints left.

I just enjoy the game instead of clawing at my face and screaming at the ceiling "OHHH IF ONLY THIS TREE HAD ADVANCED DX11 TESSELLATION!"

  • Like 3

The good sort, obviously.

I'm not sure where you're going with that. Am I personally on a crusade to make every developer stop making PC games? No. I'd just prefer them to focus on quality over useless crap like these articles would suggest is a huge deal.

No but you do trash every game that doesn't use certain DX11 features, regardless of how well they perform and / or look.

I just enjoy the game instead of clawing at my face and screaming at the ceiling "OHHH IF ONLY THIS TREE HAD ADVANCED DX11 TESSELLATION!"

Cool. I just don't play it unless someone buys it for me.

No but you do trash every game that doesn't use certain DX11 features, regardless of how well they perform and / or look.

Which features would that be? I've never demanded everything use tessellation.

I've seen you in the GW2 thread whining about the lack of DX11 for sure. Several other threads although I can't remember specifically what games.

No, you've seen me in the GW2 thread stating that I wouldn't buy the game until they added it, which I'm told they're working on.

And the other would be Dishonored. I might've mentioned Borderlands 2 but I didn't care about the game that much anyway. (Both of which I got for Christmas since they were half off.)

Which is kind of my point.

Your experience in GW2 won't be dramatically altered in any way, shape or form if they add DX11 features. I think that would apply to the other games as well. Of all the things that those 3 games need to be improved, DX11 is right at the bottom of the list.

Money is just not in it for developers on PC. NONE of my friends play on PC, yet every single one of them has atleast one console and loads of games. Thats the exact reason I bought a console too, was to play with friends.

Anecdotal evidence is anecdotal. Most of the people I know game on PC; a couple of girls I know have a Wii but that's about it. The point is there's enough money in PC gaming for decent ports, as evidenced by the number of decent ports we do get. Games with bad ports tends to attract a huge amount of very negative criticism, like GTA4. Those with proper ports tends to receive a huge amount of positive recognition, like Dishonored, Borderlands 2 and Far Cry 3. Bad PC ports increase the hostility directed at a game and can negatively influence sales on console.

The amount of effort put into a port shows how much developers and publishers care about their audience. I'm not interested in supporting publishers that don't respect the PC as a platform.

Exactly, DirectX 11 didn't suddenly make AvP3 a good game, nor did it make Crysis 2 any better. There were just extremely subtle differences. You seem to be artificially limiting yourself from a tonne of games over a trifling matter.

Which is kind of my point.

Your experience in GW2 won't be dramatically altered in any way, shape or form if they add DX11 features. I think that would apply to the other games as well. Of all the things that those 3 games need to be improved, DX11 is right at the bottom of the list.

So buy them. I disagree, so I didn't buy them. And the world continues to turn.

Exactly, DirectX 11 didn't suddenly make AvP3 a good game, nor did it make Crysis 2 any better. There were just extremely subtle differences. You seem to be artificially limiting yourself from a tonne of games over a trifling matter.

In a lot of games, using DX11 comes down to personal preference - some games look absolutely garbage with DX11, far too much bloom and lighting effects are applied.

So buy them. I disagree, so I didn't buy them. And the world continues to turn.

So if a game came out that was like the second coming of your favourite game ever, it was really well received by critics and players a like, it had unique innovations and amazing gameplay with a great story - but no DX11, would you still not buy it?

The first Crysis made such a horrible loss they had no choice but to develop the 2nd one for consoles too.

That's because the game was hugely delayed, wasn't very good and was horribly optimised. Even four years later I get framerate drops with a Core i7 @ 4.6GHz and GTX680 SLI setup, which is just ridiculous.

DirectX 11 didn't suddenly make AvP3 a good game, nor did it make Crysis 2 any better. There were just extremely subtle differences. You seem to be artificially limiting yourself from a tonne of games over a trifling matter.

Graphical improvements can't make up for a bad game but they can improve a good game. The DX11 features in Crysis 2 were certainly worthwhile, the tessellation especially. The point is more that the lack of such features indicates a poor port, which can mean other issues (like poor performance, bugs, etc). There really is no excuse not to include DX11 features nowadays - the lack of DX11 support certainly isn't a deal breaker (The Witcher 2 and Borderlands 2 were awesome) but it does make it less likely I'll buy a game and can diminish the experience.

That's because the game was hugely delayed, wasn't very good and was horribly optimised. Even four years later I get framerate drops with a Core i7 @ 4.6GHz and GTX680 SLI setup, which is just ridiculous.

Im sure the fact that it could only run on a paltry number of systems was a major factor, why plough all that cash into a game so that it can only run on a tiny number of PCs? Not every PC gamer has a liquid-cooled Extreme-overclocked i7 with SSDs and Crossfire Video cards.

Menu fluidness and lack of allowing use of full mouse rather than having to switch to keyboard to press enter or F or whatever is a big no-no for me. And plentiful of options is necessary too.

Keybinds also. Needs to support binding 2 things per entry. Needs to allow me to bind any and all keys including mouse buttons. (Looking at dead space 1 here, yes lets allow you to rebind keys but god forbid I want to put attack on keyboard and movement on mouse, which I only play this way) If you really want to know my fps game setup I can really post it but its way different from the norm as I cannot stand playing using WASD and mouse for attack.

GFWL can suck it.

I generally play games in dx9 mode anyway so the textures aren't really an issue.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Neowin is saying these are good prices? Thats crazy. As others have said they are just ######. Time for big tech to bring down the prices for real not this fake crap.
    • The iFlyTek AINote 2 is among the thinnest E-Ink tablets. It has an EMR stylus, a built-in fingerprint reader, and plenty of built-in AI features. You had me until "and plenty of built-in AI features." That and any company that still does the iProduct naming trope is an immediate pass. It suggests the company isn't very imaginative or creative and is trying to piggyback off another company's success. Extremely lame. Also kind of expensive. Better choices at lower prices out there.
    • These are not "great" prices... just "less awful". Apparently "Those who forget the past are doomed to pay higher prices and think they've won."
    • Russia was able to invade Crimea because of those people. But my point is that I've personally heard how great it was to be "back in Russia" right afterwards - look how great it is now. I've asked you a question in another comment which you haven't answered, so I'll ask it again: is it better now without "Europrats"?
    • ZimaBoard 2 1664 Starter Kit review: it's a cool and affordable DIY NAS by Steven Parker IceWhale Technology reached out to me asking if I was interested in testing the ZimaBoard 2, and after convincing them to send me the Starter Kit, it arrived at my doorstep in May. A bit of background: it is a Shanghai-based Chinese company founded in 2020, which specializes in single-board servers and personal cloud solutions. From searching around online, user feedback on the company and ZimaOS is mostly positive, so we're off to a good start. In addition, I should probably point out that although they do not have a large portfolio of NAS devices, with just four of what they do offer, they seem to have covered everything from a relatively low-priced entry point with the ZimaBoard 2, right up to the high end, with the ZimaCube 2 Creator Pack that even includes an NVIDIA RTX PRO 2000. Anyway, as already mentioned, what we have today is the ZimaBoard 2 Starter Kit, and here are the full specifications: ZimaBoard 2 Model 832, 1664 CPU Intel Core N150 (4x E Cores/Threads, Max burst up to 3.6 GHz) TDP: 6W (Base) 10W (Max) Graphics Intel UHD Graphics 24 EUs (1.00 GHz) Memory 8 GB, 16 GB DDR5 4800MT/s non ECC SODIMM (soldered) Disk Capacity 60 TB (30 TB x 2) Supported RAID Types TRAID, TRAID +, RAID0, RAID1, RAID5, RAID 6, RAID 10 Storage 2 x SATA 3.0 6Gb/s Ports with Power Bootloader 32 GB, 64 GB eMMC Network 2x RJ-45 2.5 GbE PCIe 1 x PCIe 3.0 (via LPC) USB Ports 2 x USB-A 3.1 (5 Gbps) Display Mini-DisplayPort 1.4 (4K@60Hz) Hardware Transcoding Engine H.264, H.265, MPEG-4, VC-1 Maximum resolution: 4K (4096 x 2160); Maximum FPS: 60 Virtualization Intel® AES New Instructions Intel® Virtualization Technology (VT-x) Intel® Virtualization Technology for Directed I/O (VT-d) Size (H/W/D) 140mm x 83mm x 31mm Weight 0.4 kg (only ZimaBoard 2 device) Power 12v 5A Power Supply Warranty 1 year (Global) 2 Years (EU) OS ZimaOS v1.6.1 MSRP $339, $399 ($548.60) As you can see above, there are two variants of the ZimaBoard 2. The lesser variant has half the eMMC storage and 8 GB less RAM, although it also costs $60 less than the top variant we are testing today. The above pricing is only for the ZimaBoard 2. I put the MSRP of the Starter Kit next to it in brackets, although as of publishing, it is discounted to $534.50. The ZimaBoard 2 started life on Kickstarter and shipped to backers in August last year. It became available via the official website in late 2025 and Q1 2026. This hobbyist NAS contains the still relatively new N150 Intel CPU released in the first quarter of 2025, with support for DisplayPort 1.4, HDMI 2.1, although in this case, the memory is integrated into the board itself, so it will not be possible to upgrade or expand the amount. It also supports AV1 decoding, as well as H.264, VP8, VP9, H.265 (8 bit), and H.265 (10 bit). The different capabilities in the Alder Lake-N (and Twin Lake) series are listed below. Processor E-cores L3-cache Turbo clock GPU GPU-clock TDP Intel N355 8 6 MB 3.9 GHz 32 EUs 1.35 GHz 9 W Intel Core 3 N350 3.9 GHz 1.35 GHz 7 W Intel Core i3-N305 3.8 GHz 1.25 GHz 9 W Intel Core i3-N300 3.8 GHz 1.25 GHz Intel N250 4 3.8 GHz 1.25 GHz 6 W Intel Processor N200 3.7 GHz 0.75 GHz Intel N150 3.6 GHz 24 EUs 1 GHz Intel N97 1.2 GHz 12 W Intel Processor N100 3.4 GHz 0.75 GHz 6 W The CPU is part of the Twin Lake series that sits near the bottom of the N-series, designed for low- powered systems and entry-level laptops, and as such has a base level TDP of just 6W. As I have noted before, we are seeing another NAS with a great amount of RAM. It's important to mention that the ZimaBoard 2's memory is integrated into the base board (which is why they have two variants of it). As a reminder, up until a couple of years ago, it was commonplace to only get 2 or 4GB max on a flagship Synology or QNAP home NAS. Ever since the likes of TerraMaster and more have entered the market with ample RAM sizes included in their NAS offerings, it has gone a long way in forcing the hands of the traditional makers to up their game a bit. First impressions The Starter Kit came in one outer box with several packages inside it (shown above). I forgot to take pics of it because when it arrived, it wasn't clear what was inside, and I had to confirm with my contact that I received the entire Starter Kit. In the box ZimaBoard 2 ZimaBoard 2 HDD Expansion Bracket + PCIe card frame Zimaboard Mini DisplayPort Male to HDMI Female Cable 4K 60Hz Zimaboard PCIe 3.0 x4 to Dual NVMe M.2 SSD Adapter Card Quick guide [full online guide] Limited warranty notice Screws Design Where to start? You'd be forgiven for mistaking it as an SSD enclosure if not for all the ports on it. It is completely made out of metal, and the top is an entire heatsink. It has a premium feel about it, but it definitely looks like a hobby device. As you will see, the completed build looks like it belongs in a server or meter closet rather than as a showpiece on someone's desk. On what I am calling the rear, there's a Mini DisplayPort (1.4), two 2.5 GbE ports, with Type A 3.1 USB ports, and then the barrel connector port. Around the front, there are two SATA6 ports with a power connector in the middle. Left side Right side One side is completely free of ports. On the other there's a slit that allows for the feed of a CPU fan cable, and a PCIe 3.0 X4 slot. Top Bottom The top is entirely made up of a heatsink except for the extended height for the I/O on the rear. Around the other side, you can find the ZIMA branding and some regulatory information stamped near the bottom. As you may see from the bottom of the ZimaBoard 2, it scratches quite easily from just moving it around on my Ikea island. Teardown Before we get started, let's have a look at this thing on the inside. The steps to get to the board are as follows: Remove the four smaller Torx screws on the bottom of the ZimaBoard 2; Remove the four larger Torx screws on the sides of the device; Carefully unstick the CMOS battery from the PCB; Remove two Phillips screws on the PCB; Lift out the PCB. Yes, as you can tell from the instructions, you need three different tools to remove Torx and Phillips screws (10 in total), and unhelpfully, one of the screws is located under the CMOS battery, which is stuck onto the PCB. Building Now comes the fun part. Because the ZimaSpace website does not provide any guidance on how to put the Starter Kit together. They only have guidance for connecting the CPU fan. However, they did upload a video to their YouTube channel that shows the entire process. To install the fan, first remove the four screws on the bottom of the ZimaBoard 2, then on the inside, there is a CPU FAN connector where you can attach the fan, reattach the ZimaBoard 2 frame, and feed the fan cable through the provided slit. Then remove the nearest screw on the side and attach the fan frame to the side of the device using the same screw. ZimaBard 2 screws Aligning the screws Bottom view Remember those four screws we removed to access the CPU FAN? Longer screws are provided in the box with the HDD Expansion Bracket, which is what you will now need to attach the ZimaBoard 2 to it. Helpfully, the orientation on how to attach it is made obvious when the frame can only be screwed on at the same overall length as the ZimaBoard 2. If you do it the wrong way around (which is what I did initially) one side hangs off the frame, and it becomes difficult to attach the PCIe Adapter Card cable. PCIe card frame Other side PCIe slot connector Next, it's time to attach the PCIe card frame, which is fastened with the help of 3.5-inch SATA HDD (3 screws). These are toolless screws that you can just use your fingers to fasten them with. Then it is time to connect the provided PCIe cable with the slot connector on one side of the ZimaBoard 2, feed it through the bottom of the HDD frame, and fasten it with two standoffs. Both bracket options 2280 standoffs with 2x 4TB MP44Q The PCIe 3.0 X4 card comes with a short bracket option, handy if you decide to place it inside a different NAS or rack server, but here we need the long bracket. Oddly enough, the M.2 standoffs were preinstalled into the 22110 position, but extra standoffs are included in the box, which I installed at the 2280 position for our use. I added a couple of MP44Q M.2 PCIe 4.0 SSDs (2 x 4TB) that can be availed on Amazon for $478.99 (the lowest price for 3 months) that TEAMGROUP supplied us with Then we have the almost completed build, you just need to push the card into the PCIe slot. Unfortunately, IceWhale Technologies did not provide a screw for the PCIe card frame (this is also apparent in their own video). Here it is at several different angles, with the last pic showing the SATA Y-Cable connected to the two WD Red Plus 4TB drives. Setup and Usage Next, you connect your cables to the I/O, and the ZimaBoard 2 powers on automatically, as there is no power button on the device. Power is controlled through the Settings in ZimaOS. BIOS The ZimaBoard 2 includes an Aptio BIOS from American Megatrends [1, 2, 3], and you can setup pretty much everything here including the boot order, which is locked to the UEFI OS, however above that choice you can enable or disable booting to a SATA/USB bootloader so this would still allow you to switch to an alternative bootloader and boot from it, or disable it to instead always start from the first disk with an OS installed on it. Initial Setup Upon connecting to the LAN and booting up, the ZimaBoard 2 can be reached by navigating to the IP address (shown if you have a monitor connected), or you can find it using the ZIMA Client desktop application, which is essentially a Zima device finder. Initializing the ZimaBoard 2 The ZimaOS setup process is pretty straightforward, through a wizard, and in full above, it basically consists of setting up an account and some handy tips, and that's that! Post Setup (ZimaOS update) Upon first boot, you are alerted that there is a ZimaOS update from 1.5.0 to 1.6.1, which I applied; the full process is shown above with the changelog. ZimaBoard 2 Storage Setup Next, it is time to set up the storage. ZimaOS actually throws everything onto the eMMC flash drive; it is also the default location of AppData, which is definitely something to be wary about, as the 45GB available storage could fill up quickly. HDDs I first attempted to create a Storage Pool using the two 4TB WD Red Plus NAS drives, and got an error message: After several attempts and then looking online, I discovered it was a bug with ZimaOS where the fix was simply to reboot ZimaOS and then try again, this time I was able to create a RAID mirror using the two drives. SSDs I did the same for the SSDs, as you will see in the above gallery, when I created the second Storage Pool, it only allowed me to select available drives. ZimaBoard 2 AppData ZimaOS comes with an App Store that includes a repository of almost 400 apps, so you will be able to find most of what you'll need for a NAS (although after a quick search, I wasn't able to find a Surveillance Manager), and now comes the important part: moving the default AppData location off the 45GB eMMC and onto a larger volume: Open Settings Then Apps Then, in the Select a new location field, click on the new Storage volume you want to move it to (in my case, the Apps Storage Pool), which is the SSD RAID mirror. Confirm the Migration warning Be praised! You can also do this for Docker (which by default installs onto the 45GB eMMC flash drive) and the User database. Plex Setup Next, I tested the configuration by installing the Plex Server app from the App Store. The library folders must already exist (which I placed into the Storage Pool). Plex Server setup is straightforward and requires very little configuration. In my case, all I had to do was add the media path I just created, which you can also browse to using the folder icon in the path field. In addition, you can now map the new Media library in Windows Explorer using the Zima Client. Oddly enough, it is not possible to access the ZimaBoard 2 over the Network Neighborhood; you must map drives using the client, which is shown in the last image in the above gallery. I watched one of my Blu-Ray rips, which is Dolby Vision with Dolby Atmos, and the content played fine with no stuttering or buffering, which is what anyone needs in this scenario. ZimaBoard 2 Zima Client mobile app There's also a client for mobile. It is pretty barebones, as shown in the above gallery, for example, the Apps screen launches the WebUI for that app, and the Backup must be done manually. On opening Backup, you can select internal storage folders on your phone to backup to the ZimaBoard 2's storage, and although this is constantly scanned, the backup action itself must be manually triggered. There is an option to allow foreground backup (last image in the above gallery), but this basically means the queued backup gets triggered when you manually open the app. Benchmarking SATA PCIe 3.0 X4 A CrystalDiskMark test on a mapped network drive from within a Windows 11 25H2 PC (image above) connected over a 2.5 GbE was well within acceptable ranges. Writes were generally better on the SSD RAID mirror. SATA PCIe 3.0 X1 I also ran the NAS Performance tester, which tests the link speed performance. As you can see, it pretty much maxes out the 2.5GbE connection. Of course, you can also opt to bond the two 2.5 GbE connections for a bit more umph, but I didn't do that. Thermals Top PCIe card SATA HDDs Next, I measured some hotspots while playing content on Plex. It's fair to say this will perform better than a NAS that is enclosed in a metal or plastic case, as almost everything storage-wise is exposed! Anyway, the ZimaBoard 2 did not break a sweat with Plex streaming or disk benchmarks. ZimaOS Factory Reset ZimaOS does not include a factory reset option. Instead, you have to download the ZimaOS image and flash it to the eMMC manually. The flashing process is shown in the above gallery. The steps to do so are listed below: Download the ZimaOS image here; Open BalenaEtcher (Run as Administrator) and select the image; Select your inserted USB drive (min 8 GB) Flash to it; Connect your USB drive, monitor, keyboard, USB hub (optional), mouse (optional), and network cable (recommended) to the ZimaBoard 2; Connect power and press F11 continuously; Select your USB drive starting with UEFI in the boot device menu; Press Enter on the Install ZimaOS option; Select /dev/mmcblk0 (MMC) flash drive as target; Confirm with (three times) to wipe the target disk; Wait a couple of minutes while ZimaOS installs; Remove the USB drive and confirm with a reboot; Your ZimaBoard 2 has been factory reset. However, you don't have to stick with ZimaOS, in fact the company also offers official CasaOS images, that are based on Debian; or as they say themselves, put anything you want on this "hackable single board server" it's up to you. Conclusion I had a lot of fun putting this together. I've custom-built all my own PCs and servers since the 90s, and this is the first time I have had to put a NAS together. Even if the actual base ZimaBoard 2 was already a completed build, it still feels pretty custom. I just wish that IceWhale Technology included a getting-started guide in the box for the Start Kit, which would have really completed this kit. Instead, I had to search for the official video on the YouTube channel to make sure I wasn't doing anything wrong. So who is this for? Definitely the hobbyist who is comfortable building their own PC and servers. It also has a much smaller footprint than its nearest equivalent (in terms of specs), like the Beelink Me Pro, which is another NAS I will be testing soon. Although the Beelink does not come with the PCIe 3.0 X4 expansion, the ZimaBoard 2 Starter Kit suddenly looks to be a great bargain, even if it only offers the two 3.5-inch bays over the four in the other example. It makes a lot of sense to use Intel's N150 chip inside a NAS; it is more than capable of doing what the ZimaBoard 2 is intended for, media streaming and backup. It also looks like the IceWhale Technology staff are quite active in the official forums helping people with issues they come across with ZimaOS and the devices, peer support seems to be good as well, I was quickly able to find why I was not able to create a new Storage Pool in ZimaOS v1.6.1 even though that is quite a serious bug, hopefully it will be fixed in the next update. If you are comfortable with the command line and Docker, you'll be fine. You can do great things with this hardware. This was my first time with ZimaOS. It seems a bit barebones in comparison to the likes of Synology DSM, TOS, and UGOS, but it has a ton of apps to get you started with your home or small business NAS. Where to buy As of publishing, IceWhale Technology is running a discount of up to 5% for the Starter Kit. If you opt to get just the ZimaBoard 2 itself, it does come with a SATA Y-Cable, so you will be able to connect up to two 3.5-inch HDDs to it. ZimaBoard 2 1668 Starter Kit for $534.50 on Amazon US (was $548.60) ZimaBoard 2 832 Starter Kit for $372.88 on Amazon US (was $390.60) Zimaboard 2 1668 (16GB+64GB) for $419.90 on Amazon US Zimaboard 2 832 (8GB+32GB) for $359.90 on Amazon Disclosure: IceWhale Technology provided a free sample without any editorial input or review pre-approval. Good to know The Amazon link is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, when you purchase through links on our site, we earn from qualifying purchases.
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      487
    2. 2
      +Edouard
      220
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!