UK Car Recommendations


Recommended Posts

Having just had my Vectra declared "uneconomical to repair" following a shunt, I find myself up a creek without a paddle, car wise. I'm not even remotely a petrol head so I'm wondering if you guys have some recommendations..

I'm looking for something in a family car. I need reasonable space in the back (2 kids), decent boot space, something that's reasonably roomy as I ain't a small chap. I'm thinking possibly diesel as many modern diesels are in tax band C now so are cheap to tax. I don't need high performance but I do like "features". :p

I've got a budget of about ?6k, maybe ?7k at a push (depending on what my insurance company pay out). I'd prefer something within 3 years old if I can swing it.

I'm thinking maybe something like a Renault Megane, a Ford Focus or possibly a Vauxhall Astra, but I'll welcome any suggestions!

Link to comment
https://www.neowin.net/forum/topic/1134744-uk-car-recommendations/
Share on other sites

I would highly recommend the Nissan Note. It's a Mini MPV (Rather than a Saloon) and really spacious, has plenty of features and is fairly cheap for a new model (09 Reg, 60k miles, ?5.5k).

Also it's so easy and comfortable to drive. Try and get a newer model if you can (They look much nicer).

Just bear in mind being in the UK a Japanese car e.g. nissan, mitsubishi etc will be more expensive on insurance

for example i drive a 2005 Mitsubishi Lancer 1.6 and i am close to ?500 insurance

and for a ford focus 1.6 sport i am ?233

Honda Civic is a good choice, got one myself a while ago, decent space, good economy and a surprisingly large ammount of room....

Plus for techies like most people on Neowin the dash looks like a space ship lol.

I would highly recommend the Nissan Note. It's a Mini MPV (Rather than a Saloon) and really spacious, has plenty of features and is fairly cheap for a new model (09 Reg, 60k miles, ?5.5k).

Also it's so easy and comfortable to drive. Try and get a newer model if you can (They look much nicer).

Nissan customer service is shocking and their dealers aren't any better.

On a more consecutive note if your looking to stick with Vauxhall then the Insignia can be picked up in your price range.

Bit of a curveball but the Mk3 Renault Laguna is also a lot of car for the money and much improved over the last one. Although the looks are a bit of an acquired taste.

Nissan customer service is shocking and their dealers aren't any better.

Well we've never had to deal with Customer Service, and the dealers we have been to were actually very good and very helpful, much better than the Vauxhall one I recently went to.

Well we've never had to deal with Customer Service, and the dealers we have been to were actually very good and very helpful, much better than the Vauxhall one I recently went to.

True - it was wrong of me to tar them all with the same brush, there are good ones and like Renault - the non franchise ones do tend to be better.

All interesting posts, thanks. :)

I'm leaning towards something from Ford, I think. I've had Fords in the past and loved every one of them. Hell, I only got rid of my XR3i because some uninsured bint t-boned me out of a side street years ago! :(

However, I kinda like Vauxhalls too... My Vectra did me well, though as Clarkson often complains, they do NOT go around corners at any decent speed! :p Might take an Astra out for a test drive.

Gah.. This is all so damned irritating... Bloody stupid woman slamming her brakes on for no reason...

What about petrol or diesel? My commute is really short, 4 miles each way, so I guess diesel wouldn't be a good idea...

^ Heh, I'm asking because I -don't- want a Vectra! I got that for specific reasons at the time which no longer exist, and didn't know it was a turkey at the time.

This time, I'm trying to research better to make a more informed choice. So far, I'm kinda leaning towards a Ford Focus... Good reliable car by all counts, and very popular meaning parts won't be stupidly expensive. I'm not brand ###### though, so happy for any sensible suggestions (gotta be cheaper to run than the Vectra was).

So far, I'm kinda leaning towards a Ford Focus... Good reliable car by all counts, and very popular meaning parts won't be stupidly expensive. I'm not brand ###### though, so happy for any sensible suggestions (gotta be cheaper to run than the Vectra was).

Ford Focus directly competes with VW Golf/Jetta.

In my humble opinion, VW is better in every way: efficiency, dynamics, ergonomics, the quality of the plastic materials used to decorate the interior, etc...even the design, subjectively speaking.

VW Golf

VW Golf Plus

VW Jetta

VW Tiguan - I'm not too sure if it's a real deal, the price is too good to be true.

Skoda Octavia

Skoda Roomster

Skoda Fabia

  • Like 1

Alas, no VW's of appropriate size are within range of my address. :(

As for the Skoda's... There's a couple in my range, but they seem to have an even higher tax band than my Vectra did! I'm not looking to increase costs! :p The Vectra is a tax band H, so I'm looking for something smaller, with probably either a 1.4 or 1.6 litre engine (depending on car size - a 1.4 is fine in a Corsa, not so much in a Focus!)

Alas, no VW's of appropriate size are within range of my address. :(

No pain, no gain :/

When I was in the market for a used car last time, that was three years ago, I was literally searching day and night for the car, visited several dozen dealerships, inspected dozens of cars, etc...And then you find what you really want and need, drive happy ever after, and enjoy life :)

This topic is now closed to further replies.
  • Posts

    • Yes, it was amusing at the time because even then dbrand was well known for stealing the designs of products from other companies. That’s what they do.
    • Didn’t Dbrand once complain that Casetify was ripping off their designs a well? seems pretty bad of them to try and get around Valve’s copyright this way with that in mind.
    • Dbrand thought they could get away with this Steam Machine case, Valve disagreed by David Uzondu Image via Dbrand Dbrand has cancelled its highly anticipated Companion Cube enclosure for the Valve Steam Machine, which it teased back in November of last year with a concept render and sign-up page, because it did not ask Valve for permission first before manufacturing the case. According to Dbrand, it took the "backwards approach" of building the product first before asking for permission from the copyright holder. Seven months of work went into the project, requiring over a thousand engineering hours from the design team. Workers developed forty-four sets of injection molding tools, making a unique mold for each sub-component of the crate. When the Companion Cube went live on Monday last week, it, according to Dbrand, quickly became the second-fastest-selling product in the company's fifteen-year history, racking up orders for hundreds of thousands of units. Customers eagerly bought the $129.95 deluxe edition or the bare-bones $99.95 version, which the manufacturer cheekily branded as the "Poverty Cube". It was around this time that the legal eagles at Valve descended on the accessory maker with a formal demand. The developer pointed out that the iconic block design remains protected intellectual property from the game Portal, so unlicensed sales had to stop. Dbrand said that all its pleas to salvage the project with the Valve team, including proposals to run a properly licensed release under official terms "with their blessing", fell on deaf ears, so it had no choice but to obey and remove every trace of the product from the internet. If you bought the enclosure, the company said that banks will process your refund by the end of this week, but if it still hasn't arrived in your account by then, you should not hesitate to contact support. The Steam Machine itself is a high-performance console that Valve designed directly to bring PC gaming into the living room. It was announced on 12th November 2025 (the same day Dbrand announced the Cube) and runs on the Linux-based SteamOS, the same OS that powers the Steam Deck. As for the price, due to the shortage of memory and storage chips, the hardware cost landed much higher than people were expecting, starting at $1,049 for the 512 model (without a controller) or $1,128 with the new gamepad. The premium 2 TB model pushes those prices even higher, selling at $1,349 for the standalone console and hitting $1,428 if you want the bundle.
  • Recent Achievements

    • Rookie
      Almohandis went up a rank
      Rookie
    • Apprentice
      jahara21 went up a rank
      Apprentice
    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      534
    2. 2
      +Edouard
      266
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      97
    5. 5
      macoman
      57
  • Tell a friend

    Love Neowin? Tell a friend!