Recommended Posts

Hey all, as some of you know i brought a motherboard ram and cpu from chicane on this forum and all had been going well till i turned off the computer this morning as i left it on to download bf3.

Anyway when i got back from my college interview i turned on the computer and noticed that no picture appeared on the screen and the fans were going at full pelt (speed), turned it on and off a few time and same everytime. I then started to remove parts and build it back up, but again i still mostly had it with the fans spinning and no picture, the first time it did boot i let it start to load windows then about 30seconds into the load it just rebooted at first i thought it was because of updates and it started again then rebooted and then the fans were going full speed again....

an hour later

Rebuilt the machine a few times, played with the PSU wires incase that was the issue and only loaded as far as the bios (logged into the menu kept an eye on voltages and cpu temp) auto reboot and most times fail to reach post screen again. I then got my old components and put them onto a box and connected them up to check the PSU and had no issues so re-tried the parts i brought again and sometimes it would boot to post but most times it failed. I plan on (if i can catch my mate at home) taking the board, cpu and memory to a friends just to double cehck the PSU if he has a decent one but i can not think of anything else it could be or any other checks i could do. Couldnt be the Battery in the board could it? Gues si'll check that tomorrow....

Anyhow if it is the board can anyone recommend one, i know next to nothing about intel been an amd fan boy for many years only problem i have is all the other boards are mostly second hand and only have 2 ram slots when i need 4 to use all the ram.

Like i said worked fine for about 15hours then all of a sudden this seems odd anyway any help and wisdom is welcomed.

oh yes the parts:

Intel Q9550 CPU with retail cooler.

* Gigabyte EP43-DS3 Motherboard

* 8GB (4x2GB) Kingston HyperX 4GB (2x2GB) DDR2 8500C5 1066MHz Dual Channel RAM

Link to comment
https://www.neowin.net/forum/topic/1135504-motherboad-dead/
Share on other sites

It could be the battery since you shut it off. They are only about 3 dollars US.

I'll try that tomorrow then, i have one in the motherboard i have now and anothr in another motherboard i have that idea only popped into my head as i wrote the above cleared the cmos though by removing it just never thought about a swap

edit:

Infact i'll try it now with the motherboard at the side, already rebuilt the computer with the old parts brb.

No difference tried battery from motherboard i stopped using and one from the motherboard im currently using same thing though no booting to the post screen. Also found out the fan making the most noise was the gpu fan not the cpu one like i thought, also tried another gfx card i remembered i had which uses less power and no joy. I'll ask friends if they have a 775 cpu laying around see if they mind putting it in this motherboard guess thats the best way find out but tbh i dunno anyone that has one so could be a challenge lol

Edit

Off my mates tomorrow try out his PSU see if he can figure out the issue.

I will have to see what my mate says when i visit him his eye to detail is alot better than mine but everything looks good imo on the board, plus i'll see what he says about his cpu in the board as a check with his psu. Everything ive seen on the internet said mainboard or psu, though i have had suggestions that the cpu could be overheating but i dont see that from a cold boot tbh plus with core temp highest i saw was 57c after a bf3 play and in the bios when i left it on for testing it never went over 30c but rebooted then started to fail to post.

If its the board then i need to try and get another one as soon as i can this duel core is doing my nut in ever so slow just lately facebook freezes, jumping tabs which youtube is on means silence and pause of the video while it attempts to catch up and if it fails it normally means "Flash player has crashed" lol

Anyway thanks for the feedback soon as i know more i'll post.

Fingers crossed you get to the bottom of it. I feel bad but hand on heart that motherboard served me for about 3 years and was 100% reliable.. If I had any doubt about it I would never have sold it on.

Anyway - keep at it!

Fingers crossed you get to the bottom of it. I feel bad but hand on heart that motherboard served me for about 3 years and was 100% reliable.. If I had any doubt about it I would never have sold it on.

Anyway - keep at it!

Thanks Chicane and everyone else.

Turns out it was the psu, dont know why its working on my old gear but not this motherboard as it was a decent one too, sure its old now but its better than the one i borrowed i feel.

What i had: 600w enermax

What i borrowed: 425w Hipper

You would fo thought the more wattage would be better! haha guess not :/

Guess i'll find a replacement soon will have to do some research.

It might not be the load causing the problem, but could have just failed... it does happen.

I have an OCZ StealthXStream (I think) power supply which started doing something similar to yours. You could power the machine on and it'd work for about 30 seconds.. might start to boot Windows, or just get into Windows before turning off. Then would turn on again and keep doing the same thing. Even if you went into the BIOS, it'd still just reset.

Tested with a spare PSU from work and found it was indeed faulty.. worked fine with the new PSU. Luckily it turned out to be under a 3 year extended warranty with OCZ and it was about 2 years old so I was able to send it back and get a brand new one off them - no problems so far!

I was running that board, the quad core CPU, Palit GeForce GTX 560 OC, SSD, 1TB 7200RPM HDD, and PCI-e sound card (which needed a molex connection for additional power) off that 500W OCZ power supply for years so your 600W enermax should be more than up to it!

Anyway - glad you got to the bottom of it.. even if it does mean a bit more expense! :(

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Of course the problem was Secure Boot's new certificates. Install media created by the official Media Creation Tool is already signed with a valid certificate from Microsoft, so maybe that certificate isn't "up-to-date" enough for machines with the new ones installed in the UEFI. There's really no other logical explanation.
    • Here is how I fixed Windows 11 not booting after clean installation by Taras Buria Story time. A couple of weeks ago, I experienced a very odd thing with my computers. I was trying to reinstall Windows 11 on my primary device, and everything was going smoothly until the installer performed the first restart. After that, my computer entered the boot disk selection screen instead of continuing the setup process. Huh, that's odd, said I, and selected Windows Boot Manager only to see it fall back into the same screen right away. Then I tried booting from the USB drive with the same result—the PC kept returning to the boot device selection screen, and removing the drive would send my PC to UEFI, again, with no way to launch Windows 11. I fired up my spare laptop, which has been sitting unused for quite a while, to see if I am dealing with a defective USB drive. Nope, Windows 11 installed and started without issues. After trying another drive and checking all the possible settings in UEFI, I decided to try disabling Secure Boot. Lo and behold, Windows 11 started as it should have been in the first place, continued the setup process, and reached the initial setup screen. Victory! After I finished the setup and applied all updates, I re-enabled Secure Boot, and Windows 11 started without issues. Some time later, I tried reinstalling Windows 11 on my laptop only to experience similar issues, with UEFI claiming a Secure Boot violation. I checked whether the drive works on my main PC, and yes, it installed Windows 11 without errors. I scratched my head, went to UEFI, turned off Secure Boot, and installed Windows 11 without issues. After that, I enabled Secure Boot. Note: I used the official Media Creation Tool app for my USB drive. Also, UEFI was properly configured for Windows 11, including no Legacy Mode, a GPT-partitioned drive, and TPM and Secure Boot enabled. From my experience, if you are dealing with similar symptoms, I recommend two things: If you use old Windows 11 install media, create a new one with the latest Windows 11 release, especially if you know your PC already has the latest Secure Boot certificates. If you cannot create a new one, turn off Secure Boot, complete the installation, download all available updates, and then re-enable Secure Boot in UEFI. Note that you need to turn off Secure Boot after installing Windows 11. Otherwise, the installer won't run, claiming a hardware requirements mismatch. I believe the problem hides in Secure Boot certificates that expire this month. Microsoft is currently rolling out new certificates, and maybe a mismatch was causing these issues for both of my systems. I am out of my depth to make a definitive statement; this article is flagged as "Opinion," as I only share my experience and some tips on how to fix the problem. If some of you possess deeper knowledge and understanding of the situation, please share it in the comments. As for everyone else struggling with computers not booting after a clean install, the two steps above should get you out of the pickle.
    • I gave the tool a chance the other day to make a USB. An hour later it was stuck at 0% downloaded. I downloaded the official ISO, downloaded Rufus, and made the USB myself in 15 min.
    • <Moved to software discussion and support> I've got fond memories of Winamp. Changing the skins, the different visualisations etc. But now I just need a simple music player. MSN messenger would be another one, MSN Messenger Plus (I think?) offered so many different plugins. But again, it probably wouldn't work for me these days. And then there is miRC. i think it's still going these days, but lord i had fun with that back in the day. Now it's mostly stuff like Discord, WhatsApp group chats, Signal, Telegram... /me is showing his age...
  • Recent Achievements

    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      agatameier earned a badge
      Week One Done
    • Week One Done
      ssd21345 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      518
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      ATLien_0
      94
    5. 5
      Steven P.
      77
  • Tell a friend

    Love Neowin? Tell a friend!