Beige vs Black Optical Drives


Recommended Posts

I was watching a video by Tek Syndicate on YouTube today, and Logan mentioned that optical drive CD/DVD burners with a black faceplate get hotter than beige ones and decrease writing speeds. Usually Logan is quite accurate with his information, but I found this to be a little too much. I've searched online for confirmation on this and I couldn't find ANYTHING. It's logical that it could be possible because black absorbs heat more, but is it really that significant? I can't imagine that being true. He also mentioned that orange faceplates are the best because they disperse heat easier. I don't doubt that, but do corporations even make orange faceplates? This is all very confusing, but interesting nevertheless.

I would link the original video, but I can't find it at the moment, even in my YouTube history. (I watched 3 Teks today and they're ~35 minutes long and don't want to look through them.)

Can anyone confirm this information?

Link to comment
https://www.neowin.net/forum/topic/1136438-beige-vs-black-optical-drives/
Share on other sites

It's logical that it could be possible because black absorbs heat more, but is it really that significant?

No, it isn't.

With direct sunlight shining on the PC, both beige and black faceplate will get hot and it won't affect the writing speed at all.

Actually black will get slightly hotter

dont think it will affect performance though

the "color" black (actually a dull flat black) absorbs every wavelength of visible light. this absorption creates heat, just like when you stand in the sun. white reflects all "colors" but white so it reflects most of the heat

OMG, black does not get hotter. Where do people get these ideas?

Personally I think that MYTH started with black vehicles, which seem to get hotter.

The color black does NOT absorb heat, in any way, it's just that on vehicles a shiney color reflects sun off better than a dark color.

Hense why a black car would end up being hotter compared to a silver car.

Christ... it ain't rocket science.

OMG, black does not get hotter. Where do people get these ideas?

Personally I think that MYTH started with black vehicles, which seem to get hotter.

The color black does NOT absorb heat, in any way, it's just that on vehicles a shiney color reflects sun off better than a dark color.

Hense why a black car would end up being hotter compared to a silver car.

Christ... it ain't rocket science.

People get these ideas because it is a scientific fact

Black absorbs all light whereas white reflects all light back. The energy that black absorbs as light manifests itself as heat.

OMG, black does not get hotter. Where do people get these ideas?

Personally I think that MYTH started with black vehicles, which seem to get hotter.

The color black does NOT absorb heat, in any way, it's just that on vehicles a shiney color reflects sun off better than a dark color.

Hense why a black car would end up being hotter compared to a silver car.

Christ... it ain't rocket science.

These ideas come from studying physics mate. Black absorbs all energy in the visible light spectrum. some energy is reflected off a black object in the infra red spectrum (HEAT) and with all the energy the material absorbs, it will have an increase in temperature over an object of any other colour. Having said that, the claims that a black optical drive will run hotter is false because there are many other variables that will have a much greater impact on the temperature of the drive than it's colour. Prime example is friction from it's moving parts.

OMG, black does not get hotter. Where do people get these ideas?

Personally I think that MYTH started with black vehicles, which seem to get hotter.

The color black does NOT absorb heat, in any way, it's just that on vehicles a shiney color reflects sun off better than a dark color.

Hense why a black car would end up being hotter compared to a silver car.

Christ... it ain't rocket science.

Funniest post of the day. I sure hope he wasn't trying to be serious.

  • Like 3

LOL.... OP, you got trolled, even if it did get "hotter" it isn't going to change how fast the drive writes. I hope you didn't spend all day looking for different colored face plates to increase your burning speed...

And yes, black reflects less light back, but are we talking about energy from a light source like the sun or are we talking about heat? Black won't get "hotter" because of the ambient temp, it just will reflect back less light if a light source is pointed at it, increasing it's temp.

OMG, black does not get hotter. Where do people get these ideas?

Personally I think that MYTH started with black vehicles, which seem to get hotter.

The color black does NOT absorb heat, in any way, it's just that on vehicles a shiney color reflects sun off better than a dark color.

Hense why a black car would end up being hotter compared to a silver car.

Christ... it ain't rocket science.

Funniest post of the day. I sure hope he wasn't trying to be serious.

Actually I think you guys are reading it wrong LUTZIFER is actually right.

Black does not "absorb" heat in the way I think some of you are describing. I think it is coming off as "it grabs ambient heat, it just doesn't reflect as much back thus that increases the temp of a black surface/object.

No, it isn't.

With direct sunlight shining on the PC, both beige and black faceplate will get hot and it won't affect the writing speed at all.

The increased prevalence of black optical drives is due to the increased prevalence of black PC cases - nothing else, or less.

It's not just in the BYO space (which is where black PC cases took off, primarily due to being the opposite of beige) - what is the prevailing color among OEMs these days (DELL and HP especially)? White = Apple, pretty much (white is the prevalent color of most desktop Macs and all portables - the Mac Pro is the desktop exception), while black has become the New Beige.

Modders are, in fact, moving as far away from black, beige, AND white as primary/base colors as possible for that reason.

(That said, I went specifically with black faceplates for my last two optical drive purchases to match the cases - both were going into black cases, however, the drives DID include beige faceplates.)

Christ... it ain't rocket science.

Every time someone says this, I am reminded of October Sky(for people who haven't see it, its a movie about some average kids going to an average school doing rocket science). Do people actually think rocket science is hard? Go to Walmart and pick up a rocket kit. Congratulations, you are now a rocket scientist. Any child can do this. If you are trying to make a point, at least use something that is hard to accomplish and understand, like string theory, why females act the way they do, or stem cell research.

LOL.... OP, you got trolled, even if it did get "hotter" it isn't going to change how fast the drive writes. I hope you didn't spend all day looking for different colored face plates to increase your burning speed...

And yes, black reflects less light back, but are we talking about energy from a light source like the sun or are we talking about heat? Black won't get "hotter" because of the ambient temp, it just will reflect back less light if a light source is pointed at it, increasing it's temp.

Actually I think you guys are reading it wrong LUTZIFER is actually right.

Black does not "absorb" heat in the way I think some of you are describing. I think it is coming off as "it grabs ambient heat, it just doesn't reflect as much back thus that increases the temp of a black surface/object.

Black reflects no light. Black is the absence of light. Light (white) is made of of seven basic color light rays (wavelengths). An object of color reflects its own color light ray and absorbs the remaining light. Thus, a white object reflects ALL light and absorbs none, a red object reflects red light and absorbs 6 color rays, and black reflects no light - absorbing ALL rays. The more rays absorbed, the greater the heat.

Unless things have changed in basic, fourth grade science classes.

Every time someone says this, I am reminded of October Sky(for people who haven't see it, its a movie about some average kids going to an average school doing rocket science). Do people actually think rocket science is hard? Go to Walmart and pick up a rocket kit. Congratulations, you are now a rocket scientist. Any child can do this. If you are trying to make a point, at least use something that is hard to accomplish and understand, like string theory, why females act the way they do, or stem cell research.

Typically it is used when referring to putting a object into orbit or landing it on another planet. Getting a model rocket and shooting it off is not the "science" part however. Building the rocket from scratch and putting it into orbit, would be more what the term is used for. But I get what you are saying.

OMG, black does not get hotter. Where do people get these ideas?

Personally I think that MYTH started with black vehicles, which seem to get hotter.

The color black does NOT absorb heat, in any way, it's just that on vehicles a shiney color reflects sun off better than a dark color.

Hense why a black car would end up being hotter compared to a silver car.

Christ... it ain't rocket science.

its fact.. black does absorb ... while lighter shiner reflects

This thread is brilliant. It really makes me fell better about myself.

Just to throw something else in there though. Black objects do reflect light!.. Well light energy anyway. However when it is 'reflected' it is 'reflected' in the infrared wavelength so we cannot see it with our eyes but it is there.

;)

Wow, this is one of the strangest PC myths I've ever heard.

Let's be realistic here. The heat from the inside of your PC case is going to heat up an optical drive much much much more than some infrared rays hitting the small surface area of the front bezel of the optical drive. And the heat inside your case fluctuates quite a bit depending on what you're doing, so it's simple to disprove this "myth".

Plus these bezels are plastic, which is a poor conductor of heat.

And regarding the discussion of white vs black and heat absorption, let's go back to the basics here.

First of all, "heat" is simply caused by the vibration and rubbing of particles.

A black surface absorbs all visible light waves, so there will be a lot of particles "rubbing" together which creates heat.

Since a white surface reflects these light waves, these particles aren't present to create the same magnitude of heat.

It's basically as simple as that.

Typically it is used when referring to putting a object into orbit or landing it on another planet. Getting a model rocket and shooting it off is not the "science" part however. Building the rocket from scratch and putting it into orbit, would be more what the term is used for. But I get what you are saying.

Well in the case of the Walmart rockets, you build those yourself using the parts and instructions. Go to hobby lobby and you can find kits to design the thing. October Sky was about average kids building rockets from scratch. Also, don't forget that rocket science includes missiles. "Rocket Science" is no where near as hard as people make it out to be when using that phase.

Quick question

Why do Islamic men and women tend to wear black clothing from head to toe in the searing heat of the day?

Wouldn't it be more beneficial to them if they wore white? Seeing as Black apparently absorbs so much more heat...

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Again, this is an irrelevant attempt to attack the messenger. The truth does not require any justification.
    • Removed the blue and underline as you did not post a link. This would also  be considered spamming.
    • Why it's almost impossible to produce a smartphone in the United States by Hamid Ganji If you look at the back of some Apple products, you can see the famous phrase “Designed by Apple in California, Assembled in China.” This phrase appears on products from one of the largest smartphone brands in the United States. These products are designed in the U.S., but their manufacturing takes place in China, India, Vietnam, or even Brazil. But why can’t Apple, as one of the largest American tech companies, produce its iPhones on U.S. soil? The idea for this topic came to me after the Trump Foundation launched a smartphone called the T1 and claimed that it was designed and built with American values in mind. However, this claim did not last long, as it was revealed that Trump’s phone was actually a rebranded HTC U24 Pro, with only a gold case and minor internal component changes. You see? Even a phone that is supposed to represent American values is manufactured in China. With a gross domestic product (GDP) exceeding $32 trillion, the United States is currently the world’s largest economy, while China ranks second with around $20 trillion. On the other hand, the United States is by a wide margin the global leader in various technological fields, and American companies spend hundreds of billions of dollars annually on research and development. From Apple and Google to Microsoft, Lockheed Martin, Boeing, and others, American tech and industrial giants lead their foreign competitors in many sectors. The United States also has no shortage of smartphone brands. Apple, Google, and Motorola are among the major brands in the smartphone market, collectively holding a significant share. However, the vast majority of their products are manufactured outside the United States. So why is it that the world’s largest economy, home to the most advanced technology companies and industrial powers, cannot produce a smartphone on its own soil? Let’s explore this question together. Even threats to impose tariffs won’t work After Trump entered the White House as the 47th President of the United States, his administration adopted strict tariff policies. One of these policies was the imposition of a 25% tariff on smartphones manufactured outside the United States. Trump said he “had a little problem” with Apple CEO Tim Cook over producing smartphones outside the U.S. So he thought that threatening a 25% tax on imported phones might force Apple to bring manufacturing back to the United States. “I have long ago informed Tim Cook of Apple that I expect their iPhones that will be sold in the United States of America will be manufactured and built in the United States, not India, or anyplace else,” Trump wrote on Truth Social. Image via The White House Although Apple currently manufactures some of the iPhone’s chips in the United States with TSMC's help, it still shows no willingness to shift full iPhone production to the country. At the time, renowned Apple supply chain analyst Ming-Chi Kuo wrote on X, “In terms of profitability, it’s way better for Apple to take the hit of a 25% tariff on iPhones sold in the US market than to move iPhone assembly lines back to the US.” However, manufacturing a smartphone in the United States is not as easy as it might seem, and many technical and economic barriers are involved. The lack of necessary manufacturing hubs There is a clear reason why many companies prefer to manufacture their products in China. China has established itself as the main global manufacturing hub for international companies, and over the past few decades, large contract manufacturers have emerged there, allowing companies like Apple to outsource production. One such example is Foxconn, which also manufactures some Apple products in India. Building the infrastructure required to produce smartphones in the United States would require tens of billions of dollars in new investment. Factories would need to be built, essential manufacturing equipment would have to be installed, and, most importantly, a skilled workforce capable of operating these systems would need to be recruited and trained. The United States currently lacks the core infrastructure needed to manufacture smartphones, and for this reason, many companies prefer to outsource production to Chinese contractors rather than spend tens of billions of dollars to build that infrastructure, which is significantly more economically efficient. Additionally, building such infrastructure in the United States could take up to a decade, ultimately leading to a significant increase in the product's final price for consumers. Shortage of trained labor in the U.S. compared to China Decades of serving as a global manufacturing hub have allowed China to build a massive talent pool in the production sector that is almost unmatched worldwide. Today, if a company chooses to manufacture its products in China, it can be confident that the workers involved in production have years of experience in their respective roles and are capable of producing high-quality goods with minimal errors. Even if we assume that tens of billions of dollars were invested in building smartphone manufacturing infrastructure in the United States, finding skilled workers would remain highly challenging. Apple CEO Tim Cook visiting the iPhone 6 assembly line in China in 2014. Image: Tim Cook on X In a 2015 interview on CBS’s 60 Minutes, Tim Cook said the main reason Apple isn’t producing in the US is a lack of skills. "China put an enormous focus on manufacturing, in what you and I would call vocational kind of skills. The US over time began to stop having as many vocational kinds of skills. I mean you could take every tool and die maker in the United States and probably put them in the room that we're currently sitting in. In China you would have to have multiple football fields,” Cook said. Also, in 2017, at the Fortune Global Forum in Guangzhou, Cook once again emphasized the importance of highly skilled Chinese workers. “China has moved into very advanced manufacturing, so you find in China the intersection of craftsman kind of skill, and sophisticated robotics and the computer science world. That intersection, which is very rare to find anywhere, that kind of skill, is very important to our business because of the precision and quality level that we like. The thing that most people focus on if they’re a foreigner coming to China is the size of the market, and obviously, it’s the biggest market in the world in so many areas. But for us, the number one attraction is the quality of the people,” Apple CEO said. Higher labor costs in the United States Producing almost any product in the United States is more expensive than in many other countries, and one of the main reasons is the higher cost of labor in the U.S. According to the Bureau of Labor Statistics, median weekly earnings of full-time workers in the United States were $1,235 in the first quarter of 2026. Meanwhile, the average annual salary in China's private sector in 2025 was RMB 71,590 (US$9,961). In many parts of the world, the weekly wage of an American worker is equivalent to several months of income. Another important factor to consider is that in the United States, the workforce capable of working on a smartphone assembly line is highly specialized and therefore commands higher-than-average wages. According to an estimate by Bank of America, producing an iPhone in the U.S. is technically possible, but “iPhone cost can increase 25% purely on higher labor cost in the U.S.” However, this 25% increase applies only if final assembly is performed in the United States while components are still sourced from China or elsewhere. In this case, the price of a base iPhone would rise from $799 to around $1,000. But in another scenario, if Apple were to produce the required components for the iPhone within the United States, production costs could increase by more than 90%. Trump’s dream for a “Made in the USA” iPhone might never come true In a free-market capitalist economy, one of the primary responsibilities of any CEO is to maximize profit. Using Apple as an example, Tim Cook’s role is to maximize the company’s profits so that it can fund research and development for new products and invest in areas such as artificial intelligence, while also keeping shareholders satisfied. Therefore, it is entirely understandable that Apple would choose not to bring its manufacturing back to the United States and instead keep production in countries where labor is cheaper, and products can be manufactured at a lower cost, thereby maximizing its profit margins. What is your opinion about manufacturing smartphones in the United States? If you are an American citizen, would you be willing to pay hundreds of dollars more for a smartphone made domestically in the USA? Let us know in the comments.
  • Recent Achievements

    • Conversation Starter
      jessse3334 earned a badge
      Conversation Starter
    • Reacting Well
      JuvenileDelinquent earned a badge
      Reacting Well
    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      506
    2. 2
      +Edouard
      196
    3. 3
      PsYcHoKiLLa
      153
    4. 4
      Steven P.
      72
    5. 5
      FloatingFatMan
      65
  • Tell a friend

    Love Neowin? Tell a friend!