Recommended Posts

Hey All,

Sadly i am moving back home to live with the parents, they have a standard ADSL Max package from BT and are using the BT Hub3.

I would like to replace that with a new modem / router which is dd-wrt compatible but i have no idea what is a decent router these days i am abit out of touch with it all :( I want something that is under ?100 if possible tbh,

Any suggestions welcome!

Cheers x

I am enjoying my Linksys Cisco WRT160NL running the 2nd latest release of DD-WRT and it is 100% stable (hence I haven't upgraded to the latest release)

You can get them for well under ?100 on ebay

http://www.ebay.co.uk/sch/i.html?_trksid=p5197.m570.l1313&_nkw=WRT160NL&_sacat=0&_from=R40

A router+modem that is DD-WRT compatible? According to their hardware table that restricts the search to only one single model: Buffalo WBMR-HP-G300N (Lantiq AR9@333 + Atheros AR9280). If you want save a good amount of money the BT Home Hub V2B can run OpenWRT on it. The Asus DSL-N55U can't run dd-wrt or open-wrt but it's one of the best routers with modem you can find for that price, awesome hardware and rock solid firmware (much more reliable than previous Asus routers).

I am enjoying my Linksys Cisco WRT160NL running the 2nd latest release of DD-WRT and it is 100% stable (hence I haven't upgraded to the latest release)

You can get them for well under ?100 on ebay

http://www.ebay.co.u...cat=0&_from=R40

Hey Mate, is this the correct model? http://www.dabs.com/...WRT160NL&src=16

Cheers :) ill buy it for delivery Saturday if so :)

Hey Mate, is this the correct model? http://www.dabs.com/...WRT160NL&src=16

Cheers :) ill buy it for delivery Saturday if so :)

Yep, that's the one :)

When you first flash DD-WRT to it, there are 2 firmwares, first flash is for Linksys > DD-WRT transition, 2nd one is the full DD-WRT firmware, and any updates after that only need the main firmware flashing

Hey Mate, is this the correct model? http://www.dabs.com/...WRT160NL&src=16

Cheers :) ill buy it for delivery Saturday if so :)

Maybe you should consider looking at some other models too, the WRT160NL is pretty old (it came out in 2009) and the range is quite mediocre even if you replace the antennas (source: I have bought basically every Linksys model since the WRT54G).

Maybe you should consider looking at some other models too, the WRT160NL is pretty old (it came out in 2009) and the range is quite mediocre even if you replace the antennas (source: I have bought basically every Linksys model since the WRT54G).

My wifi range is superb with the stock antennas, neighbours 2 doors away can connect easily, coverage all over my house

Just used DD-WRT to boost the range / power

Capture.PNG

My wifi range is superb with the stock antennas, neighbours 2 doors away can connect easily, coverage all over my house

Just used DD-WRT to boost the range / power

A router range can be relative, the same router could cover your whole house but at the same time cover barely one room in somebody's else house, it depends on the walls, on the interference and on the country's regulations for transmit power. I had much, much better performance with other linksys models like the dual-band E3000 rather than with the WRT160NL that I found having a similar range to the older WRT160N or the WRT300N. Anyway there are websites that benchmark routers and while certainly better than the average the WRT160NL couldn't nearly match to some of the newer models (see here http://www.smallnetb...d-router-charts ). Also if you actually use the USB port having a 100mbit LAN and only a 400mhz CPU and 32mb of ram could greatly limit the samba performance when sharing drives. That Asus modem I linked has 128mb of RAM and two 600mhz+ CPUs and it literally flies (I had to glue it to the table) with samba.

A router range can be relative, the same router could cover your whole house but at the same time cover barely one room in somebody's else house, it depends on the walls, on the interference and on the country's regulations for transmit power. I had much, much better performance with other linksys models like the dual-band E3000 rather than with the WRT160NL that I found having a similar range to the older WRT160N or the WRT300N. Anyway there are websites that benchmark routers and while certainly better than the average the WRT160NL couldn't nearly match to some of the newer models (see here http://www.smallnetb...d-router-charts ). Also if you actually use the USB port having a 100mbit LAN and only a 400mhz CPU and 32mb of ram could greatly limit the samba performance when sharing drives. That Asus modem I linked has 128mb of RAM and two 600mhz+ CPUs and it literally flies (I had to glue it to the table) with samba.

I have a Samba share set up via the USB port and I get the full 100mbps (10MB/s) read/write to the drive via LAN, burst speeds upto 15MB/s, I only have wireless G laptop so can't test if it can perform any faster atm

Of course there are going to be better routers, but OP wanted a router for under ?100 and some feedback from someone who owns one.

For a typical house full of devices, it manages extremely well, I have all 4 LAN ports wired to different devices, I have 5 wireless devices connected with around 3-4 connected at any one time and its fine

If you have experience with a better router at a similar price then by all means, advise away ;)

I dont think that WRT160NL actually has ADSL build in, meaning i would need to user a separate modem to connect to the internet yea?

Yep, I have: Phoneline > Openreach Modem > WRT160NL > Devices

Not sure I've seen any DD-WRT ADSL Modem/Routers

I have a Samba share set up via the USB port and I get the full 100mbps (10MB/s) read/write to the drive via LAN, burst speeds upto 15MB/s, I only have wireless G laptop so can't test if it can perform any faster atm

USB2 can go much faster than that, I managed to get full speed only from 600mhz devices mostly because samba is very CPU intensive.

Of course there are going to be better routers, but OP wanted a router for under ?100 and some feedback from someone who owns one.

For a typical house full of devices, it manages extremely well, I have all 4 LAN ports wired to different devices, I have 5 wireless devices connected with around 3-4 connected at any one time and its fine

If you have experience with a better router at a similar price then by all means, advise away ;)

There are hundreds of routers that can run DD-WRT/OpenWRT very reliably nowadays so it's just a question on what you actually want from one, for example I bought a router for OpenWRT a couple weeks ago to use as 3g router, I paid it 25? (TP-Link 3420) yet it never freezed or had to be restarted (and the wifi range is actually decent). Some have lots of ram, some have fast CPUs, some have multiple USBs, some have 3 antennas or can go up to 1W of transmission power, there's as lot to choose from.

I dont think that WRT160NL actually has ADSL build in, meaning i would need to user a separate modem to connect to the internet yea?

As I previously wrote in my post there is literally one (1) modem+router that can run DD-WRT. The reason is that DSL drivers are proprietary and usually their source code is never released so DD-WRT and OpenWRT developers have a very hard time getting those to work. If you don't mind running OpenWRT instead you can find the BT Home Hub V2B (it has to be the B revision) with the modem, wifi 802.11n and USB: it's very cheap and very reliable.

USB2 can go much faster than that, I managed to get full speed only from 600mhz devices mostly because samba is very CPU intensive.

I formatted my Samba drive to EXT4 to get those speeds, with FAT32 and NTFS is was 2-6MB/s tops

I formatted my Samba drive to EXT4 to get those speeds, with FAT32 and NTFS is was 2-6MB/s tops

I think it's just dd-wrt not being much performant on those filesystems due to using the kernel driver rather than ntfs-3g and still coming with a pretty old kernel (2.4?). With that CPU it should go twice that speed, maybe if you install ntfs-3g or openwrt it'll have better performance.

That Buffalo looks decent, im going to look for reviews now.

You can't follow the reviews if you're going to use a third party firmware, the behavior could be entirely different with another firmware. That router works well only with OpenWRT, forget using DD-WRT on it, when the official dd-wrt build for that router was compiled the lantiq support was very lacking and the wireless driver used for the atheros wifi wasn't in much better shape. OpenWRT supports several different lantiq platforms and routers (DD-WRT instead supports only that model) so you're very likely to have a much better experience on it.

You can't follow the reviews if you're going to use a third party firmware, the behavior could be entirely different with another firmware. That router works well only with OpenWRT, forget using DD-WRT on it, when the official dd-wrt build for that router was compiled the lantiq support was very lacking and the wireless driver used for the atheros wifi wasn't in much better shape. OpenWRT supports several different lantiq platforms and routers (DD-WRT instead supports only that model) so you're very likely to have a much better experience on it.

buffalo routers come with dd-wrt on them, so he can indeed follow reviews

buffalo routers come with dd-wrt on them, so he can indeed follow reviews

Not all models do and the firmware is preinstalled only in some regions (USA only?), I still haven't seen one shipping with dd-wrt officially here. From the screenshots of the webui for that model it certainly doesn't come with dd-wrt nor the product page shows the dd-wrt logo for it.

Not all models do and the firmware is preinstalled only in some regions (USA only?)

ah, that explains that. I'm in the US and I'm pretty sure they all come with dd-wrt here. didn't realize it was different in other regions

Well maybe i got a good device? I put DD-WRT on it and the thing is working great so far, the only issues i heard of was the network ports on the device being abit flakey, but mine appear to be fine :)

Wireless is great, the signal now reaches a lot further than it did on stock firmware, most likely because i can increase the signal strength etc. For a cheap ADSL / Router, its not performing bad at all tbh.

I will update this thread if i get any problems though, i am not going to be biased because i paid for it.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • JBL BAR 800 5.1.2 Dolby Atmos soundbar is an amazing deal today by Sayan Sen This Amazon Prime Day 2026 sales so far we have had a couple of nice deals related to sound and audio. First we have the Sennheiser HD 600 at its lowest ever price of just $225. Next we also have the Beats Studio Pro at its lowest price ever at just $150. However perhaps you prefer your gear to sound great on a larger scale, like throughout the room. In that case an all-in-one soundbar system can help and currently JBL's BAR 800 is a great deal for sure as it's up for grabs at just $600 (purchase link under the specs table down below). One thing that should be appreciated a lot about these JBL soundbars is their spec sheet and the frequency response data it provides. The firm is honest about it as JBL confirms the subwoofer is able to go down to 35 Hz at -6dB or F6. This means it should be covering 40Hz and up very well, where most of the bass lies. You miss out on a lot of sub-bass but that is to be expected given the price point and the subwoofer driver size. Speaking of which, it is a 10-inch driver and promises a max output power of 300 watts at 1% THD (total harmonic distortion). JBL also claims the system will provide you with a "True Dolby Atmos" experience. The surround speakers are wireless and battery-powered which means setting them up should be really convenient. The technical specs of the JBL BAR 800 are given in the table below: Specification Value Channel Configuration 5.1.2-channel soundbar system Dolby Atmos Yes, with 2 up-firing drivers Total System Power Output 720 W Soundbar Power Output 340 W Surround Speaker Power Output 2 × 40 W Subwoofer Power Output 300 W Soundbar Drivers 3 × 46×90 mm racetrack drivers, 3 × 20 mm tweeters, 2 × 70 mm up-firing full-range drivers Surround Speaker Drivers 1 × 46×90 mm racetrack driver (each speaker) Subwoofer Driver 10-inch (260 mm) wireless subwoofer Frequency Response 35 Hz – 20 kHz (-6 dB) Audio Inputs Optical, Bluetooth, Chromecast built-in, AirPlay, Alexa Multi-Room Music (MRM), USB* HDMI Inputs 1 HDMI video input HDMI Output 1 HDMI eARC output HDCP Version 2.3 HDR Pass-Through HDR10, Dolby Vision Bluetooth Version 5.0 Wi-Fi Version 6, 6E Streaming Services Chromecast built-in, Apple AirPlay, Alexa MRM Get it at the link below: JBL Bar 800-5.1.2-Channel Dolby Atmos soundbar with Detachable Surround Speakers (Black): $599.85 (Sold and Shipped by Amazon US with Prime) Prime subscription can be cancelled within three business days. Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • Microsoft releases PowerToys v0.100.1, fixes a bug that made remapped keys misbehave by Ivan Jenic Microsoft just released PowerToys v0.100.1, a patch update that addresses several stability and behavior issues found in v0.100.0. The v0.100.0 patch was a significant update for PowerToys, as it introduced all sorts of new features and additions, such as a rebuilt Shortcut Guide, a Command Palette Extension Gallery, webcam overlay support in ZoomIt, and more. However, the v0.100.0 version also introduced some bugs and stability issues. And now, Microsoft is addressing these issues in the new patch. The most impactful fix in this release perhaps is in Keyboard Manager, where remapped modifier keys were being delivered as system-key events, causing unexpected behavior in apps. The clearest example of this was Alt-to-Backspace remaps, deleting whole words instead of a single character. So, if you thought there was an issue with your keyboard, Microsoft just confirmed that it was PowerToys. Beyond the Keyboard Manager fix, v0.100.1 also addresses several other issues. It fixes a bug with Power Display that was preventing monitors from waking from standby correctly. Additionally, the new update patches Quick Access crashes on launch, and resolves a Shortcut Guide crash that occurred when switching between sidebar sections. Here’s the full changelog: Color Picker Fixed a bug where the main Color Picker window could appear inside the zoomed-in picker view Command Palette Fixed Run history initialization in AOT builds Fixed a bug where the Performance Monitor dock item could show ??? after restart Fixed the Hibernate command using the Sleep icon Limited the "pin to dock" dialog to displays where the dock is enabled Keyboard Manager Fixed modifier keys remapped to non-modifier keys being delivered as system-key events, which caused unexpected behavior in apps such as Alt-to-Backspace deleting whole words Power Display Fixed a bug where selecting On in the monitor power-state control did not wake a monitor from standby Fixed built-in display detection and brightness control on dual-GPU laptops where the internal panel is driven by the discrete GPU PowerToys Run Fixed VS Code Workspaces discovery after VS Code moved recently opened workspace data to shared storage Quick Access Fixed Quick Access flyout crashes caused by unhandled XAML exceptions during launch or page navigation Shortcut Guide Fixed a crash when navigating between Shortcut Guide sidebar sections Fixed number-key rendering in shortcut manifests and added a Postman shortcut manifest Updated bundled shortcut manifests to use the literal number-key token so number keys render correctly across apps ZoomIt Fixed a race condition in audio initialization for ZoomIt video recording You can download PowerToys v0.100.1 from the official GitHub releases page.
    • OBS Studio 32.2.0 Beta 2 by Razvan Serea OBS Studio is software designed for capturing, compositing, encoding, recording, and streaming video content, efficiently. It is the re-write of the widely used Open Broadcaster Software, to allow even more features and multi-platform support. OBS Studio supports multiple sources, including media files, games, web pages, application windows, webcams, your desktop, microphone and more. OBS Studio Features: High performance real time video/audio capturing and mixing, with unlimited scenes you can switch between seamlessly via custom transitions. Live streaming to Twitch, YouTube, Periscope, Mixer, GoodGame, DailyMotion, Hitbox, VK and any other RTMP server Filters for video sources such as image masking, color correction, chroma/color keying, and more. x264, H.264 and AAC for your live streams and video recordings Intel Quick Sync Video (QSV) and NVIDIA NVENC support Intuitive audio mixer with per-source filters such as noise gate, noise suppression, and gain. Take full control with VST plugin support. GPU-based game capture for high performance game streaming Unlimited number of scenes and sources Number of different and customizable transitions for when you switch between scenes Hotkeys for almost any action such as start or stop your stream or recording, push-to-talk, fast mute of any audio source, show or hide any video source, switch between scenes,and much more Live preview of any changes on your scenes and sources using Studio Mode before pushing them to your stream where your viewers will see those changes DirectShow capture device support (webcams, capture cards, etc) Powerful and easy to use configuration options. Add new Sources, duplicate existing ones, and adjust their properties effortlessly. Streamlined Settings panel for quickly configuring your broadcasts and recordings. Switch between different profiles with ease. Light and dark themes available to fit your environment. …and many other features. For free. At all. OBS Studio 32.2.0 Beta 2 changelog: Beta 2 Changes Fixed a CI deployment issue. There are no application changes since Beta 1. 32.2 New Features Replaced add source dropdown with new dialog [Warchamp7] Improved FPS selector UX [jcm93] Added missing file support for filters [exeldro] Added ability for plugins to set custom icons for new source types [cg2121] Included .webp files when adding a directory to Image Slide Show source [TarunCore] Added copy paste functions to frontend API [exeldro] Added filter to compose SDR into HDR [jpark37] Added delete as a hotkey to delete sources on macOS [PatTheMav] Added dynamic bitrate support to multitrack video [lexano-ivs] 32.2 Changes Forced Intel-based installations to update to Apple Silicon version on macOS [PatTheMav] This change means that OBS Studio versions built for Intel-based Macs but running on Apple Silicon Macs will automatically update to OBS Studio built for Apple Silicon Macs. If an installation was using third-party plugins, those plugins will no longer load until replaced with Apple Silicon versions. Fixed audio mixer state getting out of sync when changing settings via websockets or plugins [Warchamp7] Added theming for checked QToolButtons [glikely] Improved OpenGL performance slightly on low-end machines [kkartaltepe] Set minimum size for color source to 1 pixel [exeldro] Added minimum width to spinboxes [Warchamp7] Disallowed overwriting the crash handler [sebastian-s-beckmann] Applied process mitigation policies for Windows [notr1ch] Adjusted description of multitrack video [jhnbwrs] Changed new capture devices to use fallback frame rate by default [PatTheMav] Improved DLL loading behavior on Windows [notr1ch] Limited multitrack video config to Custom service [PatTheMav] 32.2 Bug Fixes Fixed OAuth and dock state save corruption [PatTheMav] Fixed group bounds not resizing when removing items [howellrl] Fixed canvas mixes not being restored after video reset [dsaedtler] Fixed some erroneous crashes during shutdown [Warchamp7] Fixed display capture sometimes capturing black after a duplicator failure [ThrowTop] Fixed color of controls dock output buttons in System theme [shiina424] Fixed virtual camera reset failures [stephematician] Fixed potential crash when user discards changes in the settings window [suogesi] Fixed incorrect return value in virtualcam filter [xtfo] Fixed source toolbar buttons not working after dragging a source into a group [Warchamp7] Fixed properties hint icon spacing [Warchamp7] Fixed potential crash when a video device reconnects on macOS [jcm93] Fixed an issue where PipeWire could fail on NVIDIA GPUs [hoshinolina] Fixed obs_canvas_get_video_info returning incorrect framerate [dsaedtler] 32.2 Deprecations Deprecated obs_properties_add_button [sebastian-s-beckmann] Download: OBS Studio 32.2.0 Beta 2 | Portable | ARM64 | ~200.0 MB (Open Source) View: OBS Studio Homepage | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Is a fast food restaurant a good metric to compare against?
    • Grand Theft Auto VI pricing revealed alongside Ultimate Edition and pre-loading details by Pulasthi Ariyasinghe Last week, Rockstar revealed Grand Theft Auto VI pre-orders will be starting soon, and just a day ahead of that, now the studio has announced the official pricing for the highly anticipated game. This has been a hotly debated topic among fans and industry veterans for a long time, considering the game is expected to be the biggest entertainment product launch ever. The confirmed pricing for the Grand Theft Auto VI standard edition is $79.99, which Rockstar says gives access to the "single-player experience set in the biggest, most immersive evolution of the series yet." This follows what most of our readers thought would happen with the pricing too. At the same time, a $99.99 Grand Theft Auto VI: Ultimate Edition has been confirmed as well, which lands with "an exclusive collection of premium vehicles, weapons, apparel, and action threaded across all aspects of Jason and Lucia’s story." Pre-ordering will also give fans extra bonuses, including a Vintage Vice City Pack of cosmetic items as well as a free month of GTA+. Head to the official website of the game here to check out all the cosmetic rewards the Ultimate Edition and pre-orders bring. Interestingly, the studio does not mention Grand Theft Auto VI multiplayer at all in today's announcement. Perhaps this will arrive later, following the campaign launch, or the studio is keeping that reveal for a later date. Digital pre-orders for Grand Theft Auto VI will begin on June 25, 2026, at midnight local time across regions for Xbox Series X|S and PlayStation 5. The title is slated to launch on November 19 on those same platforms. Pre-loading for Grand Theft Auto VI will kick off on November 12, giving players a week to get the game ready on their consoles. As for the physical edition, Take-Two has confirmed that this will be available without a disc, with the box only containing a download code inside. This will be purchasable starting November 12, giving players who take this route time to pre-load the title as well.
  • Recent Achievements

    • One Year In
      OHI Accounting earned a badge
      One Year In
    • First Post
      Almohandis earned a badge
      First Post
    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      474
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      122
    4. 4
      Michael Scrip
      83
    5. 5
      Xenon
      72
  • Tell a friend

    Love Neowin? Tell a friend!