Recommended Posts

Don't see why it would be bad as long as you've got drivers for everything and Windows is behaving. Personally I'd only really consider x86 for systems that obviously couldn't run x64 (old Athlon XP's, etc or have old hardware that doesn't have 64 bit drivers), or systems that only have like 2GB memory where 64 bit would probably do more harm than good due to the overhead.

This PC has never run x64. The specs are pretty low, 1.5GB RAM, 3GHz single-core processor. I was just worried that it might not last long until it crashes or something.

Don't worry, x86 or x64 will not cause your hardware to fail on its own

x64 has its advantages over x86 if your machine can run it, if you only have a couple gigs of RAM, then x86 is probably better, but neither is going to waste your hardware any faster

EDIT - How did you install Win 8 on 1.5GB of RAM ?

This PC has never run x64. The specs are pretty low, 1.5GB RAM, 3GHz single-core processor. I was just worried that it might not last long until it crashes or something.

That's surprising, the Win 8 installer let you do the install? The minimum RAM for Win 8 64-bit is 2 GB, it doesn't sound like the machine meets the minimum requirements.

Without thinking, I installed Windows 8 64-bit on my old PC from 7 years ago that initially ran Windows XP, and I upgraded it to Windows 7 32-bit when it came out. Now I've upgraded it to 64-bit since I upgraded my other computer.

Is this bad? Should I install 32-bit instead?

why??? old hardware, new windows = never a good deal. drivers missing, slow / poor performance... the list goes on.

But hey, if you are happy with it.. i once installed Windows XP on my old trustee Pentium 200 MMX that came with Windows 95; sure it worked (upgraded everything on that puter except the board, PSU and CPU) but i could eat lunch or take a nap while the puter was booting :laugh: :woot: still did lots of Photoshop work in that, though. :rofl:

I don't see why it should be a problem if the hardware supports it. The 64-bit version requires more RAM (I think 2GB whereas 32-bit only needs 1GB). Are you having any issues? If not then I don't see a problem.

Unless you run XP, there is absolutely ZERO reason to run anything other than an x64 OS on hardware that will support it. (And even if you DO run XP, the support for x64 by XP-era hardware is a lot greater than you would think - the issue iwth XP64 and support is applications - not hardware.)

Look in the Hardware Hangout archives - I've made several posts covering migration from x32 to x64 over XP, Vista, and 7 - including my own migration (during the Vista era). The issue has by and large been applications-related, and especially since the release of Windows Vista - between that and just plain FUD, crossover was scarce during the Vista era.

Unless you run XP, there is absolutely ZERO reason to run anything other than an x64 OS on hardware that will support it. (And even if you DO run XP, the support for x64 by XP-era hardware is a lot greater than you would think - the issue iwth XP64 and support is applications - not hardware.)

There are plenty of reasons not to run 64-bit on old hardware. The biggest one being that 64-bit uses more resources and creates more processes. The OP having 1.5GB of RAM is going to be hurting himself in performance by running x64. And finding drivers will be a nightmare. Honestly, the only upside I can think of for him to run x64 would maybe be security. And even that's a stretch.

Plus, I think we first need to know the specific CPU he's running. There are very few single-core CPUs out there that support x64, so he might be mistaken in thinking a Pentium 4 or something supports it, when in reality it doesn't.

  • Like 2

Unless you run XP, there is absolutely ZERO reason to run anything other than an x64 OS on hardware that will support it.

Maybe for home PCs, definitely not for office/corporate PCs. There's a huge amount of software, middleware, plugins, drivers, etc. that are specifically 32-bit. Getting this type of stuff to work in a 64-bit environment is often difficult or impossible, good luck trying justifying all the extra expenses to your boss/client. And frankly, most office PCs won't have more than 4 GB RAM.

But yeah, if all the software/hardware you're using is 64-bit compatible & you have 4+ GB RAM then it makes sense to go 64-bit.

Maybe for home PCs, definitely not for office/corporate PCs. There's a huge amount of software, middleware, plugins, drivers, etc. that are specifically 32-bit. Getting this type of stuff to work in a 64-bit environment is often difficult or impossible, good luck trying justifying all the extra expenses to your boss/client. And frankly, most office PCs won't have more than 4 GB RAM.

But yeah, if all the software/hardware you're using is 64-bit compatible & you have 4+ GB RAM then it makes sense to go 64-bit.

Again, you are referring to application issues - not hardware issues. (I specifically mentioned applications as being the bugbear with Windows in general, and XP in particular, in terms of migrating to x64 - I covered it in my posts covering migrating folks I support to x64 - starting with, in fact, XP64.) Further, NONE of my migratees had 4 GB of system RAM at the time of migration. None at all. (Over half had less than 2 GB of RAM - two had a mere 512MB of RAM. However, all of these were home users - not corporate or enterprise users. However, most were also using refurbished corporate or enterprise PCs - which shipped with either Windows XP Professional or even Windows 2000 Professional. Nearly the WORST of possible cases for an x64 migration; however, due to the lack of application issues with home users, I had far easier a time than would have been suspected.

The 4 GB issue - go back to Hardware Hangout and read my posts again. I started the migration trend because of - not in spite of - what I uncovered in my investigation of this particular rubric. My uncovering is, in fact, easily duplicated by anyone with access to virtualization software - simply configure identical virtual machines with each OS in the consideration pool. (Naturally, the host must support at least VT-X for both x32 and x64 to face off in this manner.) The virtualization software itself won't matter. Once the application and driver issues are addressed, the 4 GB floor is, in reality, half that. (It can be , in fact, lowered all the way down to a single gigabyte of RAM - or less - for computers used exclusively for Internet-based tasks - such as Web browsing and e-mail usage - that is exactly why smartphones, tablets, etc - which typically have memory loadouts of that size, or less - are eating PCs for lunch. It's also why I am FAR from surprised over slower sales of larger desktops.)

[snip]

Just out of curiosity, what is your justification for installing XP 64-bit on a PC, especially if it had 2GB or less of RAM?

A 64-bit word takes up twice as much memory as a 32-bit word, so with a small amount of RAM, it's a very very bad idea to go x64.

64-bit simply raises memory limitations, and the benefits on old hardware basically stop there.

I think you're overplaying it a bit. 64 bit applications do consume a little more memory than 32 bit apps but it's certainly not double.

I never said that. The memory for the instructions is double.

A 64-bit word is double that of 32-bit and whether or not you're using all the bits, that memory space is still allocated.

I tried x64 Win 7 on an early Core 2 Duo with 1GB of RAM, and the performance was pretty bad. x86 was better since more memory was freed.

  • 1 month later...

I never said that. The memory for the instructions is double.

A 64-bit word is double that of 32-bit and whether or not you're using all the bits, that memory space is still allocated.

I tried x64 Win 7 on an early Core 2 Duo with 1GB of RAM, and the performance was pretty bad. x86 was better since more memory was freed.

However, the memory USAGE of the application itself is not double - and what was the hardware in question? (One thing that has to be taken into account is badly-written or piggy drivers - while not as large an issue as it used to be, it's still an issue, especially for lower-tier hardware and peripherals.) Given identical loadouts, what's the memory usage comparison between Firefox, PaleMoon x64, and Waterfox? One reason I prefer IntelliPoint Pro (and now the Microsoft Keyboard and Mouse Center driver for Windows 8) to SetPoint for my Logitech V220 is due to SetPoint's piggishness - a porky driver that is less usable compared to an alternative gets replaced by that alternative without a quibble. Love the V220 as a wireless mouse physically, but I loathe the porkiness of SetPoint.

I've run Win 8 on older hardware, as long as the CPU supports it, needing NX bit as I recall, I see no reason to not install it. If you're running under 4GB RAM then I'd personally install the 32bit version but that has alwasy been a personal preference to ensure I'm able to take full advantage of all my system RAM. I've personallay seen a big performance improvement with Windows 8 on older hardware that was previously running XP.

I don't see why it would be a problem. Windows 7 64bit runs awesome on low powered systems, even with aero enabled,

and supposably Windows 8 requires the same specs or lower.

Should work even better than XP anyways, as long as the hardware is compatible.

I'm even thinking of picking up some old piece o junk pc just to try Win 8 on. Wouldn't want to install it on a good computer.

I never said that. The memory for the instructions is double.

A 64-bit word is double that of 32-bit and whether or not you're using all the bits, that memory space is still allocated.

I tried x64 Win 7 on an early Core 2 Duo with 1GB of RAM, and the performance was pretty bad. x86 was better since more memory was freed.

Pointers and such will be double the length, but that's basically it, the actual stuff stored in memory will be about the same.

Edit: And when using 64bit, SSE/2 support is guaranteed, unlike 32bit mode.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • We check out the SKG PS700 Neck Massager by Steven Parker I was offered the chance to test out the SKG PS700 Neck Massager, and full disclosure, they let me keep it regardless of my findings. Anyway, I jumped at the chance due to my long hours sitting at my desk; I figured it could offer some neck pain relief. What's in the box: SKG PS700-2 Neck Massager Rechargeable Battery (inside massager) Type-C USB cable User Manual Quick Start guide 1-Year Warranty In short, everything you need to get started. According to the official listing, here are the key features: Biomimetic Kneading & High Torque Motor: Designed with innovative biomimetic kneading heads that perfectly simulate the touch of human hands. Powered by a high-torque motor, this massager delivers powerful and precise deep tissue relief to effectively target stiff neck muscles and release built-up tension Soothing Heat & Integrated Sound Relaxation: Experience the ultimate Relaxationation with our dual-action approach. The soothing heat function gently warms your neck, while the built-in sound Relaxation provides calming audio tracks, helping you achieve a state of mindfulness and mental tranquility during your physical massage Cordless Convenience & Travel-Ready & Father's Day Gifts: Crafted for maximum portability and ease of use. Its lightweight, cordless design allows you to enjoy a premium massage anywhere without the hassle of tangled wires-whether you're taking a quick break at your desk or winding down at home Versatile Relief for Home & Office: An essential wellness companion for office workers, gamers, frequent travelers, or anyone looking to integrate mindfulness into their daily routine. It seamlessly fits into your lifestyle, providing instant neck relief whenever and wherever you need it Safe & Premium Materials: Manufactured with high-quality, skin-friendly materials to ensure a safe and comfortable experience without irritation. SKG backs this device with dedicated customer service, making it a thoughtful tech-health gift for family and friends App & Bluetooth Music Control: Connect via Bluetooth to control your massage settings through the dedicated app and enjoy your favorite music during your massage session for a fully customizable and immersive relaxation experience Red Light Warmth Technology: Features advanced red light warmth technology that penetrates deep into neck muscles to enhance blood circulation and provide soothing comfort while relieving muscle tension and stiffness Design With all that out of the way, here are my own findings. SKG does not say what materials are used to make the neck massager. However, on the product website, it mentions "soft-touch silicone" with what looks like PU leather cushioning, with the rest being mostly made up of plastics. On the inside of the massager, there are two "biomimetic kneading heads" that are motorized for the different styles of massage, which are not actually listed at all in the paper user manual, but the standard included modes are: De-stress mode, Mediation mode, Relax mode, Shiatsu mode. The massager looks quite premium and is actually very comfortable to wear. This massager is small and light enough to go anywhere, as it doesn't get in the way of anything, so I was able to use it in the chair while writing this review. Unlike the back massager, SKG does not warn in the user guide not to use it for more than 30 minutes a day (or two 15-minute sessions). However, there is a long laundry list of important safeguards to consider before and during the use of the device, and it is warned that the neck massager is not waterproof. It also includes a 1,400mAh battery with a rated power of 14W and input of 5V, which is the standard for up to USB 3.0 power (although the Amperage is not mentioned at all). SKG does not say how long it takes to charge, but a quick calculation at 2A (if that is what it is) would mean it would take roughly 1.5 hrs to charge from empty. In any case, the light around the button changes from orange to green on a full charge. In addition, it is not possible to use the device while it is charging. On the right of the neck massager is the On/Off and modes button, which also acts as a joystick. You can operate all the modes directly from the power button, as well as the app, which I'll get into a bit later: Push up: Short press to adjust Heat levels On/Off button: long press Mode Switching: Short press (while in operation) ➕ Push left: increase Music volume ➖ push right: decrease Music volume Push down: Short-press to turn Music on or off The massager defaults to De-stress mode, and it is not stated anywhere if the neck massager has overheat protection. This time around, regarding heat, the only detail I could find is that it has "triple action soothing heat." The temperature stages are not listed anywhere in the paper manual, Amazon listing, or official website. The heat levels can be adjusted through the app or directly on the device using the joystick button. Usage There's also the SKG Health app, which makes using the massager far easier than feeling around for the button on the side of your neck. If the app is stopped, you are required to log in with a verification code over email, which I am not too pleased with, as this means it will only work that way for however long SKG decides to support it through said app. However, I was not able to get the app to connect to the OS500, which I have reported back to my contact. Bluetooth appeared to be working on the neck massager as it became available to pair with my phone, but the SKG app failed to discover it. Before I forget, there's also a switch next to the USB charging port to deactivate and activate the Voice Prompt, which, when enabled, audibly tells the user when switching intensities, modes, or connecting to the app and informs when the massages start and are completed. That said, on to my likes and dislikes, which are listed below. What I didn't like Unable to connect the Neck Massager to the app Use through the mobile app relies on continued support from SKG What I liked Can be used without the app Cordless use Light and comfortable to wear Heat is also quite comfortable Where to buy: According to the official website, this has an MSRP of $249.99, but is currently $50 (on Amazon). To sweeten the deal a bit more, there's also an in-page coupon that knocks a further $20 off the price. SKG PS700-2 Neck Massager for $179.99 on Amazon (was $199.99) Apply the in-page $20 off coupon for the final price of $179.99 Just like the back massager, this gets a confused thumbs up (due to the cost). However, I cannot rate it through app usage as it failed to connect. As an Amazon Associate, we earn from qualifying purchases.
    • This Samsung T7 external SSD deal lasts less than a day by Sayan Sen Recently we had covered some nice deals of internal NVMe SSDs which include the 4TB TeamGroup G50 for only $400, the WD_BLACK SN7100 2TB for just $243, as well as the Samsung 990 PRO 1TB for $370. If however you require an external SSD for portability and quick data transfers and have a budget of less than $200 the Samsung T7 1TB model is currently on a limited time deal at just $190, it's lowest price in nearly three months. The deal ends today so you better hurry if you need one (purchase link below). The T7 weighs in at just 72 grams meaning it should be fairly easy to carry around helping in the portability department. Via its USB 3.2 Gen 2 interface the T7 promises sequential read speeds of up to 1050 MB/s and writes of 1000 MB/s. It is also fairly robust with a drop protection of up to 2 meters, though bear in mind that this is not waterproof. For that you will have to choose the rugged T7 Shield. The technical specifications of the Samsung T7 1TB are given in the table below: Specification Value Model Code (1TB) MU-PC1T0T / MU-PC1T0H Interface USB 3.2 Gen 2 (10 Gbps) Dimensions (W × H × D) 85 × 57 × 8 mm Weight 72 g Sequential Read Speed Up to 1,050 MB/s Sequential Write Speed Up to 1,000 MB/s Drop Resistance Up to 2 m (6.6 ft) Encryption AES 256-bit hardware encryption Operating Temperature 0°C to 60°C Non-Operating Temperature -40°C to 85°C Humidity 5% to 95% (non-condensing) Shock Resistance 1,500 G, duration 0.5 ms, 3-axis (non-operating) Vibration Resistance 20–2,000 Hz, 20 G (non-operating) Get it at the link below: Samsung T7 Portable SSD, 1TB External Solid State Drive, MU-PC1T0T/AM, Gray: $189.98 (Sold and Shipped by Amazon US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • I just wish they would put more love into Virtual Desktops. There is just so much more they could do.
    • Sounds like you just skimmed over the review, I answer all those questions in it. Although I admit I did not test if DTS works over the headphones, when I get some time I will test this. My personal use case is more speaker-driven (I cover this in the review too).
  • Recent Achievements

    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
    • First Post
      DrWankel earned a badge
      First Post
    • Reacting Well
      DrWankel earned a badge
      Reacting Well
    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      505
    2. 2
      +Edouard
      183
    3. 3
      PsYcHoKiLLa
      84
    4. 4
      Michael Scrip
      78
    5. 5
      Steven P.
      75
  • Tell a friend

    Love Neowin? Tell a friend!