Recommended Posts

Don't see why it would be bad as long as you've got drivers for everything and Windows is behaving. Personally I'd only really consider x86 for systems that obviously couldn't run x64 (old Athlon XP's, etc or have old hardware that doesn't have 64 bit drivers), or systems that only have like 2GB memory where 64 bit would probably do more harm than good due to the overhead.

This PC has never run x64. The specs are pretty low, 1.5GB RAM, 3GHz single-core processor. I was just worried that it might not last long until it crashes or something.

Don't worry, x86 or x64 will not cause your hardware to fail on its own

x64 has its advantages over x86 if your machine can run it, if you only have a couple gigs of RAM, then x86 is probably better, but neither is going to waste your hardware any faster

EDIT - How did you install Win 8 on 1.5GB of RAM ?

This PC has never run x64. The specs are pretty low, 1.5GB RAM, 3GHz single-core processor. I was just worried that it might not last long until it crashes or something.

That's surprising, the Win 8 installer let you do the install? The minimum RAM for Win 8 64-bit is 2 GB, it doesn't sound like the machine meets the minimum requirements.

Without thinking, I installed Windows 8 64-bit on my old PC from 7 years ago that initially ran Windows XP, and I upgraded it to Windows 7 32-bit when it came out. Now I've upgraded it to 64-bit since I upgraded my other computer.

Is this bad? Should I install 32-bit instead?

why??? old hardware, new windows = never a good deal. drivers missing, slow / poor performance... the list goes on.

But hey, if you are happy with it.. i once installed Windows XP on my old trustee Pentium 200 MMX that came with Windows 95; sure it worked (upgraded everything on that puter except the board, PSU and CPU) but i could eat lunch or take a nap while the puter was booting :laugh: :woot: still did lots of Photoshop work in that, though. :rofl:

I don't see why it should be a problem if the hardware supports it. The 64-bit version requires more RAM (I think 2GB whereas 32-bit only needs 1GB). Are you having any issues? If not then I don't see a problem.

Unless you run XP, there is absolutely ZERO reason to run anything other than an x64 OS on hardware that will support it. (And even if you DO run XP, the support for x64 by XP-era hardware is a lot greater than you would think - the issue iwth XP64 and support is applications - not hardware.)

Look in the Hardware Hangout archives - I've made several posts covering migration from x32 to x64 over XP, Vista, and 7 - including my own migration (during the Vista era). The issue has by and large been applications-related, and especially since the release of Windows Vista - between that and just plain FUD, crossover was scarce during the Vista era.

Unless you run XP, there is absolutely ZERO reason to run anything other than an x64 OS on hardware that will support it. (And even if you DO run XP, the support for x64 by XP-era hardware is a lot greater than you would think - the issue iwth XP64 and support is applications - not hardware.)

There are plenty of reasons not to run 64-bit on old hardware. The biggest one being that 64-bit uses more resources and creates more processes. The OP having 1.5GB of RAM is going to be hurting himself in performance by running x64. And finding drivers will be a nightmare. Honestly, the only upside I can think of for him to run x64 would maybe be security. And even that's a stretch.

Plus, I think we first need to know the specific CPU he's running. There are very few single-core CPUs out there that support x64, so he might be mistaken in thinking a Pentium 4 or something supports it, when in reality it doesn't.

  • Like 2

Unless you run XP, there is absolutely ZERO reason to run anything other than an x64 OS on hardware that will support it.

Maybe for home PCs, definitely not for office/corporate PCs. There's a huge amount of software, middleware, plugins, drivers, etc. that are specifically 32-bit. Getting this type of stuff to work in a 64-bit environment is often difficult or impossible, good luck trying justifying all the extra expenses to your boss/client. And frankly, most office PCs won't have more than 4 GB RAM.

But yeah, if all the software/hardware you're using is 64-bit compatible & you have 4+ GB RAM then it makes sense to go 64-bit.

Maybe for home PCs, definitely not for office/corporate PCs. There's a huge amount of software, middleware, plugins, drivers, etc. that are specifically 32-bit. Getting this type of stuff to work in a 64-bit environment is often difficult or impossible, good luck trying justifying all the extra expenses to your boss/client. And frankly, most office PCs won't have more than 4 GB RAM.

But yeah, if all the software/hardware you're using is 64-bit compatible & you have 4+ GB RAM then it makes sense to go 64-bit.

Again, you are referring to application issues - not hardware issues. (I specifically mentioned applications as being the bugbear with Windows in general, and XP in particular, in terms of migrating to x64 - I covered it in my posts covering migrating folks I support to x64 - starting with, in fact, XP64.) Further, NONE of my migratees had 4 GB of system RAM at the time of migration. None at all. (Over half had less than 2 GB of RAM - two had a mere 512MB of RAM. However, all of these were home users - not corporate or enterprise users. However, most were also using refurbished corporate or enterprise PCs - which shipped with either Windows XP Professional or even Windows 2000 Professional. Nearly the WORST of possible cases for an x64 migration; however, due to the lack of application issues with home users, I had far easier a time than would have been suspected.

The 4 GB issue - go back to Hardware Hangout and read my posts again. I started the migration trend because of - not in spite of - what I uncovered in my investigation of this particular rubric. My uncovering is, in fact, easily duplicated by anyone with access to virtualization software - simply configure identical virtual machines with each OS in the consideration pool. (Naturally, the host must support at least VT-X for both x32 and x64 to face off in this manner.) The virtualization software itself won't matter. Once the application and driver issues are addressed, the 4 GB floor is, in reality, half that. (It can be , in fact, lowered all the way down to a single gigabyte of RAM - or less - for computers used exclusively for Internet-based tasks - such as Web browsing and e-mail usage - that is exactly why smartphones, tablets, etc - which typically have memory loadouts of that size, or less - are eating PCs for lunch. It's also why I am FAR from surprised over slower sales of larger desktops.)

[snip]

Just out of curiosity, what is your justification for installing XP 64-bit on a PC, especially if it had 2GB or less of RAM?

A 64-bit word takes up twice as much memory as a 32-bit word, so with a small amount of RAM, it's a very very bad idea to go x64.

64-bit simply raises memory limitations, and the benefits on old hardware basically stop there.

I think you're overplaying it a bit. 64 bit applications do consume a little more memory than 32 bit apps but it's certainly not double.

I never said that. The memory for the instructions is double.

A 64-bit word is double that of 32-bit and whether or not you're using all the bits, that memory space is still allocated.

I tried x64 Win 7 on an early Core 2 Duo with 1GB of RAM, and the performance was pretty bad. x86 was better since more memory was freed.

  • 1 month later...

I never said that. The memory for the instructions is double.

A 64-bit word is double that of 32-bit and whether or not you're using all the bits, that memory space is still allocated.

I tried x64 Win 7 on an early Core 2 Duo with 1GB of RAM, and the performance was pretty bad. x86 was better since more memory was freed.

However, the memory USAGE of the application itself is not double - and what was the hardware in question? (One thing that has to be taken into account is badly-written or piggy drivers - while not as large an issue as it used to be, it's still an issue, especially for lower-tier hardware and peripherals.) Given identical loadouts, what's the memory usage comparison between Firefox, PaleMoon x64, and Waterfox? One reason I prefer IntelliPoint Pro (and now the Microsoft Keyboard and Mouse Center driver for Windows 8) to SetPoint for my Logitech V220 is due to SetPoint's piggishness - a porky driver that is less usable compared to an alternative gets replaced by that alternative without a quibble. Love the V220 as a wireless mouse physically, but I loathe the porkiness of SetPoint.

I've run Win 8 on older hardware, as long as the CPU supports it, needing NX bit as I recall, I see no reason to not install it. If you're running under 4GB RAM then I'd personally install the 32bit version but that has alwasy been a personal preference to ensure I'm able to take full advantage of all my system RAM. I've personallay seen a big performance improvement with Windows 8 on older hardware that was previously running XP.

I don't see why it would be a problem. Windows 7 64bit runs awesome on low powered systems, even with aero enabled,

and supposably Windows 8 requires the same specs or lower.

Should work even better than XP anyways, as long as the hardware is compatible.

I'm even thinking of picking up some old piece o junk pc just to try Win 8 on. Wouldn't want to install it on a good computer.

I never said that. The memory for the instructions is double.

A 64-bit word is double that of 32-bit and whether or not you're using all the bits, that memory space is still allocated.

I tried x64 Win 7 on an early Core 2 Duo with 1GB of RAM, and the performance was pretty bad. x86 was better since more memory was freed.

Pointers and such will be double the length, but that's basically it, the actual stuff stored in memory will be about the same.

Edit: And when using 64bit, SSE/2 support is guaranteed, unlike 32bit mode.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • U.S. partially reverses Anthropic AI ban for Mythos but keeps Fable 5 off the market by Karthik Mudaliar Anthropic says that the U.S. government has finally allowed it to restore Claude Mythos 5. But of course, there's a catch. The rollout is again for a limited set of U.S. organizations that operate and defend critical infrastructure. The company announced this in a post on X (formerly Twitter). This does not mean that Anthropic's latest frontier models are back to normal availability. Fable 5, which was a tuned version of Mythos 5 for public release, remains unavailable. Anthropic said that it is still working with the government to expand Mythos 5 access and make Fable 5 available again, but there's no timeline. Reports from Bloomberg and Reuters say that this decision actually came through a letter from the U.S. Commerce Department. According to Reuters, this would allow more than 100 companies and institutions access to Mythos 5. Reuters also reported that Commerce Secretary Howard Lutnick’s letter removes the need for export licenses for approved companies’ non-US citizen employees, as well as Anthropic’s own non-US citizen employees, while restrictions remain for organizations outside the approved list. Anthropic isn't alone with this kind of controlled rollout. OpenAI's newest model family, GPT 5.6, was announced just yesterday, but isn't available for everyone yet. In its announcement, OpenAI also said that access to these models is initially limited to a select group of trusted partners and organizations, with broader access planned later this year. Both of these cases show that frontier AI launches are no longer just ordinary product releases and more like slow and vetted deployments shaped heavily by the U.S. government.
    • Sol, Terra, Luna - aren't those the names of failed crypto coins? 🤣🤣🤣
    • Microsoft Weekly: 5 years of Windows 11, more support for Windows 10, and expensive Xbox by Taras Buria This week's news recap is here, with Microsoft giving Windows 10 one more year of support, Windows 11 getting new taskbar settings in preview updates, Steam Machine prices, higher XBOX prices, and many more. Quick links: Windows 10 and 11 Windows Insider Program Updates are available Reviews are in Gaming news Great deals to check Windows 11 and Windows 10 Here, we talk about everything happening around Microsoft's latest operating system in the Stable channel and preview builds: new features, removed features, controversies, bugs, interesting findings, and more. And, of course, you may find a word or two about older versions. On June 24, 2026, Windows 11 turned five. The controversial operating system was released half a decade ago, and during these years, it received a fair share of criticism (such as poor Windows Search and its web results), which Microsoft is now actively addressing with regular preview updates that deliver missing, long-requested features. With Windows 12 nowhere to be seen on the horizon, it will be interesting to see if Windows 11 can stay on the market for as long as Windows 10 did. Speaking of Windows 10 and staying on the market, this week, Microsoft quietly prolonged the Extended Security Updates program for Windows 10, allowing users to get one more year of security updates if they do not want or cannot upgrade to Windows 11. Finally, Microsoft released this month's non-security update for Windows 11. KB5095093 arrived with a traditionally long list of new features, including point-in-time restore, new Windows Update settings, quieter Windows Widgets, new accessibility features, File Explorer updates and performance improvements, and more. Windows Insider Program Here is what Microsoft released for Windows Insiders this week: Builds Canary Channel Build 29617.1000 and build 28120.2374 These builds bring new accessibility features, new Windows Update controls, audio improvements, and more. Dev Channel Build 26300.8758 This build includes redesigned taskbar settings, File Explorer improvements, and more. Beta Channel Build 26220.8754 and build 28020.2366 This small update fixes the OneDrive bug in File Explorer, tweaks system sounds in dark mode, and more. Updates are available This section covers software, firmware, and other notable updates (released and coming soon) delivering new features, security fixes, improvements, patches, and more from Microsoft and third parties. If you use AI-powered browsing history search in Microsoft Edge, the company has bad news. A new update on the Microsoft 365 Roadmap revealed that Microsoft is discontinuing the feature. Despite using on-device models for natural search, some users found it creepy, claiming that Microsoft lacks trust in features like this. While the ability to find pages without using 100% precise words may sound cool, customers argued that it was nothing but another feature to bloat the browser with more AI. Good riddance? PowerToys received several updates this week. For one, Microsoft released version 0.100.1 with several improvements and bug fixes for the recently arrived version 0.100. A couple of days later, Microsoft dropped another update, this time fixing memory leaks in Command Palette Dock. In addition, the company is working on a new module that will make it easier to switch between windows within one application using the Alt + ` shortcut. The new module should make it to the stable release somewhere soon. Here are other updates and releases you may find interesting: New Ventoy update adds Windows 11's mandatory update support and more Microsoft updates Visual Studio Code with chat cost tracking and multi-agent chats Microsoft is building an AI datacenter that "uses less water than a fast food restaurant" Microsoft adds new AI study and teaching tools for free to Microsoft 365 Education Researchers claim Microsoft's quantum breakthrough is flawed by basic Python errors Microsoft is bringing a much-needed Recap app to Teams Microsoft's fast coding model, MAI-Code-1-Flash, comes to Copilot Business and Enterprise Here are the latest drivers and firmware updates released this week: AMD Radeon Software 26.6.2 with FSR 4.1 support for RDNA 3 graphics card. However, the driver contained a bug, which prevented installations on Windows 10 PCs. AMD fixed that with a quick hotfix update. Reviews are in Here is the hardware and software we reviewed this week This week, Steven Parker published several reviews. He shared his experience with the Creative Sound Blaster AE-X PCIe, a high-quality sound card with a headphone amp, low-latency communications, great build quality, and DSD256. However, it is on the pricier side of the spectrum, and it lacks EMI shielding. Check out the full review here. The second review is about the TerraMaster F4-425 Pro, an octa-core Intel NAS with a stand-out feature: built-in AI (OpenClaw). We also published a few Hands On reviews, which you can view below: We check out the SKG PS700 Neck Massager SKG Hand Massager with Heat OS500 hands on Hands-on with BOOX Tappy: cute little reading accessory Hands on with the ProtoArc EM25 affordable ergonomic mouse On the gaming side Learn about upcoming game releases, Xbox rumors, new hardware, software updates, freebies, deals, discounts, and more. If you plan to purchase a new Xbox, it's time to act now. This week, Microsoft announced yet another Xbox price increase. Starting August 1, 2026, all Xbox Series X|S models with 512 GB of storage will cost $100 more. As for the 1TB models, they are going up in price by a whopping $150. Finally, Microsoft is discontinuing the 2TB Xbox Series X. To make up for that, Microsoft announced a few programs to make its consoles more accessible. Those include BNPL, interest-free financing, pre-owned consoles, certified refurbished consoles, and more. Valve also shared some not-so-welcome news. The company has finally announced prices of the upcoming Steam Machine console, and if you plan to buy one, get ready to spend a whopping $1,049 on the 512GB configuration. The Steam Machine is now available for preorder, with shipments scheduled for June 29, 2026. Grand Theft Auto VI also received its official price tag. Rockstar Games announced that the long-anticipated game will launch at $79.99 for the base edition and $99.99 for the ultimate edition. The latter includes an exclusive collection of premium vehicles, weapons, apparel, and action threaded across all aspects of Jason and Lucia’s story." Those who preorder the game will get extra bonuses, including a Vintage Vice City Pack of cosmetic items as well as a free month of GTA+. NVIDIA announced new games for its GeForce NOW streaming service. Those include Dark Scrolls, SAND: Raiders of Sophie, Deer & Boy, EMPULSE, and more. Steam is running its annual Summer Sale, during which you can purchase plenty of various games with big discounts. It runs until July 9, so in case you missed it, you can still get some games at a lower price. Also, you can get two games for free in the Epic Games Store, plus more deals are available in this week's Weekend PC Game Deals issue. This link will take you to other issues of the Microsoft Weekly series. You can also support Neowin by registering for a free member account or subscribing for extra member benefits, along with an ad-free tier option.
    • Text extractor hasn't been working great on 0.99.1 but I am now updating to this version, hopefully it's better!
    • Yet you did exactly what they wanted you to do - is it better now without "Europrats"? BTW, UK had joined EU (EEC back then) and was one of the leading member states, it never joined Schengen Zone though 😉
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      502
    2. 2
      +Edouard
      226
    3. 3
      PsYcHoKiLLa
      156
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!