HD Webcams! For showing PC Screen?


Recommended Posts

Hey All,

I have a client that needs a Webcam to work on Skype, so his employees can call him if they get stuck working a special peice of machinery, they can take the webcam over to the machine, and he can see what settings they have put into the control panel of the machine, and talk them through changing it etc, i know this isnt the best system in the world, but its the only thing we can think of that will be doable from his phone when out and about.

I have been looking at this webcam - http://www.amazon.co.uk/Logitech-960-000767-C920-HD-Webcam/dp/B006A2Q81M/ref=sr_1_1?s=computers&ie=UTF8&qid=1361194648&sr=1-1

But it has been so long since a even owned a webcam, i wondered if you video the screen of a CRT monitor with it, will you get them black lines running down the screen? all these old engineering machines use CRT monitors and Windows 95!

Also if the webcams will be ok, can you plug them upto a PC with extra long usb cables? or are wireless webcams good?

Cheers

Link to comment
https://www.neowin.net/forum/topic/1137120-hd-webcams-for-showing-pc-screen/
Share on other sites

I know you're looking for webcams but my 2 cents :)

Remote access might be better than a webcam and probably easier to see on a phone

We used to have HTC Touch Diamond phones at my last IT job and used them for remote access, nightmare on such a small screen but it worked

The black lines could be fixed by setting the webcam to the refresh rate of the CRT I would have thought

That's the one I have. Absolutely love it. Works awesome. Was the top of the line but Logitech just released a new one, which pretty much looks the same.

New one is Logitech c930e

http://www.logitech.com/en-us/product/webcam-c930e-business?crid=1252

It sounds like he wants them to be able to show him what is going on on a piece of machinery not an actual PC, so when he says "Control Panel" he doesn't mean Windows Control Panel. OP can you clarify?

This is what I got from it, was he wanted the ability to take the webcam over to the machine and show parts/physical control that help is needed with, not whats on the computer monitor.

It sounds like he wants them to be able to show him what is going on on a piece of machinery not an actual PC, so when he says "Control Panel" he doesn't mean Windows Control Panel. OP can you clarify?

This is what I got from it, was he wanted the ability to take the webcam over to the machine and show parts/physical control that help is needed with, not whats on the computer monitor.

Quote:

"i wondered if you video the screen of a CRT monitor with it, will you get them black lines running down the screen?"

you will always get the scanline on a webcam/video camera from a CRT, even if it's a 100hz screen. du to the collision between the webcams 25/30 fps and the scanlines 100, giving you the slower "wave" down the screen as opposed to a flicker.

you will always get the scanline on a webcam/video camera from a CRT, even if it's a 100hz screen. du to the collision between the webcams 25/30 fps and the scanlines 100, giving you the slower "wave" down the screen as opposed to a flicker.

A lot of webcams have a 50/60Hz flicker fix in the settings, not 100% sure but I always thought that was what it was for, TVs, monitors, etc

Quote:

"i wondered if you video the screen of a CRT monitor with it, will you get them black lines running down the screen?"

Right I think he wants to see the whole unit, being the controls for the system, the physical control panel, and any CRT screen that is hooked up to the unit that shows it's status/job. Not the actual OS or what is running on the CRT

Give them all iPhones and use that face thingy :p.

or you know, just Skype on anything :)

I think the problem is, it's probably precision engineering equipment, so details need to be able to be seen. Especially if it's some type of fabrication machine or electronic soldering automated system.

I don't understand why you _need_ to have a Video camera? I am sure you can send Good quality photos (using a digicam) of the machine's panel and display. Use the Webcam only to show engineers face when talking (so you know he is not lying when he says he did not press the big red button).

Sorry for the late reply guys, just to clarify...

This old machinery has CRT monitors to control it, but alot of the machinery has DOS commands to control it, or they are using old Win 95 Boxes... They even have spares incase one of the boxes suddenly dies they can just swap it out with a new one! Apparently a new updated version of the software to run on a new PC (Like Windows 7) its over ?20k, and we cant justify that.

So what we need to do, is one of the engineers can skype call the main engineer if he is out of the building, and be able to show him what is going on with the machine, what lights are on the machine at the top, what is showing on the screen, and what the status is of the various water levels etc. The only way we can think of doing this is having a webcam connected to a laptop, which is connected to the network wirelessly, so it can be taken around the building showing the people on the skype call whatever they need to see,

I hope that helps clear it up!

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Yes, it was amusing at the time because even then dbrand was well known for stealing the designs of products from other companies. That’s what they do.
    • Didn’t Dbrand once complain that Casetify was ripping off their designs a well? seems pretty bad of them to try and get around Valve’s copyright this way with that in mind.
    • Dbrand thought they could get away with this Steam Machine case, Valve disagreed by David Uzondu Image via Dbrand Dbrand has cancelled its highly anticipated Companion Cube enclosure for the Valve Steam Machine, which it teased back in November of last year with a concept render and sign-up page, because it did not ask Valve for permission first before manufacturing the case. According to Dbrand, it took the "backwards approach" of building the product first before asking for permission from the copyright holder. Seven months of work went into the project, requiring over a thousand engineering hours from the design team. Workers developed forty-four sets of injection molding tools, making a unique mold for each sub-component of the crate. When the Companion Cube went live on Monday last week, it, according to Dbrand, quickly became the second-fastest-selling product in the company's fifteen-year history, racking up orders for hundreds of thousands of units. Customers eagerly bought the $129.95 deluxe edition or the bare-bones $99.95 version, which the manufacturer cheekily branded as the "Poverty Cube". It was around this time that the legal eagles at Valve descended on the accessory maker with a formal demand. The developer pointed out that the iconic block design remains protected intellectual property from the game Portal, so unlicensed sales had to stop. Dbrand said that all its pleas to salvage the project with the Valve team, including proposals to run a properly licensed release under official terms "with their blessing", fell on deaf ears, so it had no choice but to obey and remove every trace of the product from the internet. If you bought the enclosure, the company said that banks will process your refund by the end of this week, but if it still hasn't arrived in your account by then, you should not hesitate to contact support. The Steam Machine itself is a high-performance console that Valve designed directly to bring PC gaming into the living room. It was announced on 12th November 2025 (the same day Dbrand announced the Cube) and runs on the Linux-based SteamOS, the same OS that powers the Steam Deck. As for the price, due to the shortage of memory and storage chips, the hardware cost landed much higher than people were expecting, starting at $1,049 for the 512 model (without a controller) or $1,128 with the new gamepad. The premium 2 TB model pushes those prices even higher, selling at $1,349 for the standalone console and hitting $1,428 if you want the bundle.
  • Recent Achievements

    • Rookie
      Almohandis went up a rank
      Rookie
    • Apprentice
      jahara21 went up a rank
      Apprentice
    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      534
    2. 2
      +Edouard
      265
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      97
    5. 5
      macoman
      58
  • Tell a friend

    Love Neowin? Tell a friend!