Windows 7 - No sound when playing a DVD....


Recommended Posts

sadly on my mediacenter i am forced to use windows instead of linux. and its the real crap. fails to do such basic things like plaiyng the SOUND on a dvd.

- acer ferrari 5000 notebook

- clean, fresh installation of win 7

- it plays sound files and movie files just fine, also DVDs but no sound!

- works like a charm in vlc so the hardware and drivers are fine

- i need to have it working in mediacenter which, just like mediaplayer, fails

- installed sharky win7 codec pack for divx support etc.

- still no luck with sound on dvd

- installed another codec pack. same problem.

- i set the dvd region to europe (it was not set at all first)

- i rebooted several times

- no luck

i since years thought that windows is just trash and it got confirmed. why is it that today every simple linux distribution, with only a few users behind it, can do the basic tasks of a computer/pc system MUCH better than windooze?

you know i googled the problem and i am not the only one with this ****... all they said was try install a codec pack.

why do i even need to install a codec pack (with all these ugly toolbars and trojans etc.) for such basic things?

no wonder everyone is pirating that **** OS.

any ideas?

As far as I'm aware VLC comes with its own codecs, so could be a codec problem if it is playing in that but not others

Also, try k-lite, apparently it doesnt have spam etc anymore like it used to:

http://www.free-codecs.com/download/k_lite_codec_pack.htm

I don't see your model supported under Windows 7 on Acer

Edit Ignore me I was looking at the wrong site.

the older drivers work fine in win7, also afaik last time i used win7 on my notebook (few years back) the sound output on dvd was working.

anyway. its a basic task. nothing you need complicated drivers for. the fact that vlc works shows just how **** windows is. if any linux distro would give working sound output via hdmi i would switch immediately.

Codec-wise, I use FFDShow tryout played through MPC-HC. I have no problems playing any file format.

Did you also install Cyberlink PowerDVD, it includes an MPEG-2 decoder. What version of Windows 7 is installed?

Well if memory serves Windows don't support certain video or audio playback codecs which may have been because of proprietary licenses,hence the requirement to install codec packs such as K-Lite and the revenue gained from the end user buying a codec pack from them.

Very strange if you've tried all those codec packs and none are working.

Here's answers I found elsewhere...

Hi,

1. Was it playing fine earlier?

2. Have you tried playing the DVD's in another computer?

3. Does the issue occur on all the DVD's?

Please follow the steps mentioned below.

Step 1:

In Windows Media Player,

a. Click Tools > Options > Devices > Click on DVD and select Properties.

b. Make sure that Playback and Rip are set to Digital.

Step 2:

This issue can be caused by incompatible Codec. I suggest that you remove/uninstall all the installed third party Codec packs, players or video record programs.

---

So I'd try uninstalling all codec packs, restart, install k-lite

wow epic breakthrough here :woot:

i found that i can at least bring windows media player to play the soud via the internal speakers. :rolleyes:

post-21849-0-83912300-1361708932.jpg

- i chose the first entry no sound is played

- i chose digitalaudio hd audio .. nothing

- i chose speakers (3rd entry) ... sound output via the laptop speakers. i think i dont have to add that this is no option for a media center.

the over 100mb download of cyberlink powerdvd has finished now and i will install that. if it works i can at least have 30 days of sound output. how progressive. did i already mention that microsoft is trash?

no sound output via powerdvd either.....

but at least 20 new nag-screens asking me to register somewhere. :/

cant be such a big task to have simple sound output working on a dvd...... (btw. dvd is standard with vob files ...)

more ****

post-21849-0-24708800-1361711351.jpg

i had there speakers as well and tried some settings, also thought lets try deactivate them, now they are gone and i cant get them back anymore! also not in system settings. they are just gone......... windows behaves like a virus no joke.

any ideas except more trashy codec packs?

this is so damn annoying. i plan to buy me a htpc but i wont do this until i can be completely sure that at least basic things like sound output works, otherwise i wont waste my money. damn, these things are now mainstream since how many years? 5? and still so many bugs and ****. i would not and will never ever waste a single cent on a microsoft product anymore. :angry: :angry: :angry: :angry: :angry:

Hang on your getting confusing.What ere you trying to play the audio back on thats not working as one sentence mentions internal speakers and another something else?

If you have some other hardware attached did you check device manager to ensure its installed correctly?

If you hit the test button [bottom left] you should get this screen to test the speaker out put

9ecf0a43d0914181a6d6c1fae8e04bf3.png

Hang on your getting confusing.What ere you trying to play the audio back on thats not working as one sentence mentions internal speakers and another something else?

on that pic above i had below the S/PDIF digital audio also a point which said digital audio speakers (afaik it was called that way).

i double clicked on it and tried some settings to make the dvd sound output working in media player. no success. one setting was to deactivate the speakers . i thought it was like you deactivate something in the system settings where it gets deactivated but you can activate it later on again. but not here! its not there anymore. gone forever it seems. also not back after a reboot or scanning for new hardware.

Btw what's up with using VLC if that's working fine?

that this notebook is my provisional media center right now and placed below my tv. i dont want to go down there and open it, close the media center, and open vlc, anytime i wanna watch a dvd. i think thats also not the intention why someone would wanna use a media-center.

i really need to have these basic stuff working before investing money in a htpc. otherwise i will stay in front of my pc and watch the dvds there. on linux of course.

The problem is not Microsoft, it's something to do with your setup. Windows can handle DVD's just fine, and you don't need third party codecs for it, the decoder should be included, I know it is with Ultimate.

The problem is not Microsoft, it's something to do with your setup. Windows can handle DVD's just fine, and you don't need third party codecs for it, the decoder should be included, I know it is with Ultimate.

it has nothing to do with my setup. i dont use exotic hardware nor special drivers or whatever.

the fact that media player classic and vlc both give the correct sound output shows that everything works how it should.

its something with microsofts windows media player. i am fed up hearing that something is wrong with the hardware or setup when clearly its not.

also it cant be such a difficult task to bring the sound via hdmi cable to the receiver. vlc does it. mpc does it as well. and probably every ****ty player arround there too. only microsofts does not. also the problem is often bespoken arround the web. so i am not the only one. however there is no clear solution for it.

Right click the device in your image and select show disabled devices from the drop down menu

4af3fe4d60e269cd4a8fb61c7e0d8280.png

thanks a lot that brought it back.

ok by now i dont have any soud output anymore. all i did was installing the latest ffdshow.

but now no sound output. the equalizer shows that there must be some sound but i dont hear anything .....

i will install now every codec pack i find (without uninstalling the previous one - like i did earlier) as i cant get any worse than this.

If you hit the test button [bottom left] you should get this screen to test the speaker out put

9ecf0a43d0914181a6d6c1fae8e04bf3.png

you came as close as it gets!!!

thanks to that hint i solved the problem, however i still dont uderstand it completely.

- i installed k lite codec pack again, it found ffdshow installed and asked if i wanna uninstall it. done. klite installed. reboot.

- then i unchecked these settings again (i did uncheck them earlier but no success)

- post-21849-0-02276200-1361714675.jpg

- reboot

- sound output works :D :D :D

i dont know if it was because of some ****ty codec pack or because i did not reboot.

i will reboot it now again to see if it keeps working or if it was just luck.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • A coalition of publishers sued OpenAI and Microsoft over scraping content without consent by Hamid Ganji Image via Depositphotos.com AI companies often rely on readily available internet content to train their chatbots and provide users with instant answers. This method of AI training is fast and relatively inexpensive, but using a website’s content without permission or compensation is not something publishers like to see, and this is exactly why Microsoft and OpenAI are now being sued. As reported by Bloomberg, a group of publishers that collectively own nearly 400 newspapers has filed a lawsuit against OpenAI and Microsoft. The coalition argues that the two companies scraped their content to build AI chatbots like ChatGPT and Copilot without paying any compensation. The complaint, filed in the U.S. District Court for the Southern District of New York, argues that while AI products have generated billions of dollars in market value using publishers’ work, none of that value has been shared with the publishers. The plaintiffs are seeking statutory damages and injunctive relief for alleged copyright infringement and violations of the Digital Millennium Copyright Act. “Defendants systematically and secretly crawled the Publishers’ websites—including content behind paywalls and other access restrictions—and copied the Publishers’ articles, stories, and other original works onto their own servers without authorization,” the complaint states. The publishers also described the AI boom as a “death knell for local journalism” if AI companies that scrape content for free are not held accountable. Former New Jersey Attorney General Matthew Platkin and his law firm, Platkin LLP, are representing the publishers. “Our models empower innovation, are trained on publicly available data, and are grounded in fair use,” OpenAI spokesperson Drew Pusateri told Bloomberg. This is not the first lawsuit involving the unauthorized use of publishers’ content by AI firms, but it is one of the largest coalitions ever formed against the free use of content by AI chatbots. In 2024, OpenAI and Microsoft also faced a similar lawsuit from eight newspapers that claimed AI products were benefiting from their content without permission.
    • Rufus alternative Ventoy now supports Windows 11's mandatory update, fixes major boot bug by Sayan Sen While Microsoft has its own official Media Creation Tool used for making bootable USB media, there are some popular third-party utilities as well which offer additional options like bypassing system requirements, Microsoft Account creation, and more. One of these is Ventoy, and the software has received its latest update today. In fact, the app actually got a slew of updates over the last couple of days, three version releases in total, to be specific. The first release, version 1.1.13, was pulled as there was some unspecified error in the update, and as such, the corrected version 1.1.14 was pushed out. Following that on very short notice, 1.1.15 was published as well. For those unfamiliar, Ventoy is an open-source utility that lets users create a bootable USB drive once and then simply copy ISO, WIM, IMG, VHD, or EFI files onto it without repeatedly formatting the drive. It supports both legacy BIOS and UEFI boot modes, Secure Boot, and a wide range of operating systems, making it one of the most versatile tools in the category. The biggest change in version 1.1.14 is an updated Secure Boot shim file aimed at resolving the UEFI CA 2023 issue, which is basically a compatibility problem that has affected Secure Boot environments on some systems. If you recall, we reported about severe boot issues on HP devices following the release of updated Secure Boot 2023 keys. For anyone who may not be aware, back in early 2024, Microsoft announced that it was updating Secure Boot keys as they were going to become 15 years old in 2026, which is also when they are set to expire. As such, the new 2023 certificates have been rolling out with the newest Windows 11 updates. Updated boot manager and Secure Boot certificates are crucial for protection against malware like bootkits. These are mandatory updates. Alongside that, the VentoyPlugson graphical plugin configurator was updated in sync with the release. The update also introduces a new VTOY_SECURE_BOOT_POLICY option within the Global Control plugin, giving users more flexibility in managing Secure Boot behavior. Ventoy has also received a fix for a startup issue when Secure Boot was disabled. Microsoft does officially allow users to boot systems without Secure Boot as long as the PC is Secure Boot capable. The full changelog is given below: Update secure boot shim file to solve the UEFI CA 2023 issue. The new release use a new CA, so you need to enroll the new key for the first boot time. VentoyPlugson update synchronously. Global control plugin add a VTOY_SECURE_BOOT_POLICY option. Fix the boot issue when Secure Boot is disabled in the UEFI firmware. You can download the latest version of the app here on Ventoy's official GitHub repo or from Neowin software stories.
    • Windows 11 is fine, no issues on any of the machines I've run it on since release. The stricter security requirements are a good thing, sometimes the baseline needs to change and people will winge, but it is what it is. Happened with the move from 9x to NT - broke compatability Happened with XP SP2 when security started to become a serious consideration Certainly happend with Vista that brought in UAC, the concept of not running as admin (something that has been the norm in Linux/Unix from pretty much the start) and a completely new driver stack. Windows 11 will probably get looked back at as the point where even consumer and SMB IT was dragged kicking and screaming into a somewhat secure by default configuration.
    • Bluestacks has been emulating Android on Windows for fifteen years. It's janky and riddled with ads though, so WSA looked like it was going to be a huge improvement over the emulator experience. Too bad Microsoft dropped the ball on that.
    • Classic. China would be nothing without Western, Japanese, and South Korean technology.
  • Recent Achievements

    • Rookie
      krychek57 went up a rank
      Rookie
    • Grand Master
      Jaybonaut went up a rank
      Grand Master
    • One Year In
      Philsl earned a badge
      One Year In
    • Dedicated
      Scoobystu earned a badge
      Dedicated
    • First Post
      Tom Schmidt earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      441
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      134
    4. 4
      Michael Scrip
      78
    5. 5
      Xenon
      77
  • Tell a friend

    Love Neowin? Tell a friend!