Recommended Posts

So here's the deal. I want to build a new gaming PC, with no real budget determined (although hopefully I wouldn't have to spend over $2750). This will be my first PC in a long time as I've been buying macs for a while and decided to switch back to Windows. I'm used to spending a little more up front hoping these things will last for many years, so I want something that'll accept some upgrades down the road. It needs to be quiet too, and made with parts that are available or will be available next month.

Case: I don't really care about lights or skulls on the case or anything like that, but it should look sleek and professional. Hopefully something that has some internal wire management so it doesn't look ugly inside. As far as size, hopefully not much bigger than a McPro case.

Motherboard: Should be reliable and use a socket type that will continue to be used years in the future. I also want an optical audio output to connect to my surround sound.

Processor: I want to be able to overclock. Has to be Intel. I also want a quiet (as possible) heatsink that will keep it cool under all conditions.

Memory: Fast enough memory to keep up with everything else, probably about 16 gigs.

Graphics: Something amazing, but also not noisy. Needs good drivers and support, and a good warranty.

Storage: 120+ GB SSD for the OS and a HDD for storage.

Power Supply: Should be able to power the PC reliably, need maximum efficiency and minimum heat & noise.

Don't worry about the keyboard, mouse, speakers, monitor, etc. That's all covered already. I would be buying the parts at Newegg or Micro Center, whichever one is cheaper.

Link to comment
https://www.neowin.net/forum/topic/1138360-building-a-new-pc/
Share on other sites

for $2750 you can pretty much buy all the best stuff. i'd go with a intel or crucial for the ssd due to the reliability. and a corsair psu. for $2700 though you can waste a lot of money on buying the latest and greatest, getting second best saves a lot and is usually nearly as good. evga vid cards have a great warranty and step up program. 16gigs of ram is overkill, unless you need it. if you have money to blow why not. since you've been buying macs, I guess you do, lol.

also I'd probably put win7 on it. I have 8 on my tablet and its made for that. I don't see any reason to put it on my desktop.

Motherboard: Should be reliable and use a socket type that will continue to be used years in the future. I also want an optical audio output to connect to my surround sound.

I would like nothing more then to put a 8 core CPU in my Motherboard....not going to happen, so don't expect that its just how things are.

Case is anything you like really I will just list this:

http://www.newegg.com/Product/Product.aspx?Item=N82E16811119259

RAM Cas 9 @ DDR3 1600 16GB kit

http://www.newegg.com/Product/Product.aspx?Item=N82E16820231568

SSD SAMSUNG 840 Pro or Intel 335

http://www.newegg.com/Product/Product.aspx?Item=N82E16820147192

http://www.newegg.com/Product/Product.aspx?Item=N82E16820167151

HDD 2TB

http://www.newegg.com/Product/Product.aspx?Item=N82E16822148834

Motherboard you can even opt to get a mSATA SSD for cache for the HDD

http://www.newegg.com/Product/Product.aspx?Item=N82E16813128544

CPU i7 if you want to make last in the future since upgrading it may mean a new motherboard

http://www.newegg.com/Product/Product.aspx?Item=N82E16819116501

GTX 670 that shouldn?t be too noisy.

http://www.newegg.com/Product/Product.aspx?Item=N82E16814125438

PSU 600-650W for the one card or 800W+ if you get another.

http://www.newegg.com/Product/Product.aspx?Item=N82E16817139048

Cooling

http://www.newegg.com/Product/Product.aspx?Item=N82E16835181010

For $2700 worth of computer, don't go 1155 socket. The 2011 socket has much higher performance from their chips with extra core's to boot.

Six core i7 3930

http://www.newegg.com/Product/Product.aspx?Item=N82E16819116492

MSI Motherboard with Quad channel memory up to 128 GB of DDR 3 3000 Mhz. and the X79 chipset.

http://www.newegg.com/Product/Product.aspx?Item=N82E16813130681

I would highly recomend this cooler: http://www.newegg.co...N82E16835181015

I just got it yesterday and it is silent! Very easy to install too.

I was looking at that one too. How often do you have to put water in there?

For $2700 worth of computer, don't go 1155 socket. The 2011 socket has much higher performance from their chips with extra core's to boot.

Six core i7 3930

http://www.newegg.co...N82E16819116492

MSI Motherboard with Quad channel memory up to 128 GB of DDR 3 3000 Mhz. and the X79 chipset.

http://www.newegg.co...N82E16813130681

I heard the 2011's weren't going to see much use in the future, despite it being newer. I don't know if there's any truth to that. Not sure what I would do with 128 gb of ram though!

For $2750 you could get an i7-3970x and the Nvidia Titan when it releases. :laugh:

An i7 3770K and a GTX 680 is a much more reasonable choice.

That's probably what I want, a 3770K and a GTX 670 or 680. Is the 680 fast enough to play games on the max settings right now? How long do you think it'll last in the future with the new consoles coming out?

for $2750 you can pretty much buy all the best stuff. i'd go with a intel or crucial for the ssd due to the reliability. and a corsair psu. for $2700 though you can waste a lot of money on buying the latest and greatest, getting second best saves a lot and is usually nearly as good. evga vid cards have a great warranty and step up program. 16gigs of ram is overkill, unless you need it. if you have money to blow why not. since you've been buying macs, I guess you do, lol.

also I'd probably put win7 on it. I have 8 on my tablet and its made for that. I don't see any reason to put it on my desktop.

I've always bought extra memory since it's not too expensive. I do a lot of work with raw files in Photoshop, but I never bothered to find out how much ram it's using.

Here's my suggestion for you

i7 3930k (don't waste money on i7-3970x as 3930k is also unlocked and speed bump is marginal)

Awesome minimalistic case for your tast as you described it to would be Corsair 650D (it's clean, beautiful and cable management is TOPS)

650d_a.png

I would suggest you get a motherboard I got ASUS X79 Sabertooth (instead of Rampage IV which is more than $100 more expensive)

For cooling get the new Corsair H100i water cooler and replace the stock fans immediately with Cooler Master SickleFlow.. They run at 1750rpm on H100i but are extremely silent and still keep the H100i cool.

Get the Corsair Vengence or Dominator ram.. 32gb of ram (you can go as high as 64 on Sabertooth)

GTX 680 is your awesome GPU.. you can drive up to 3 displays on it.. and it's fairly silent.. the fan will get a bit loud but only when you rock demanding games but than you probably won't hear it.

Power Supply I strongly recommend top end Corsair one (go for 1050W) just so you have flexibility or get the one I got (ROCK SOLID) Seasonic 1050W Gold

http://www.newegg.com/Product/Product.aspx?Item=N82E16817151110&Tpk=Seasonic%20PSU%201050W

SSD drives you want to go Samsung 840PRO series or OCZ Vertex 4. If you want lower cost ones you can go with Corsair GT series.. those are pretty good.

You will have similar machine as mine (you can see how I built it here: https://www.neowin.net/forum/topic/1131668-its-that-time-of-year-new-build/ )

and a PLUS is that you will also be able to easily install OSX on it as well if you ever need to so it will be a Mac workstation that's faster than anything Apple has.

That's probably what I want, a 3770K and a GTX 670 or 680. Is the 680 fast enough to play games on the max settings right now? How long do you think it'll last in the future with the new consoles coming out?

Depends on what "max" is. If we're talking high at 2,560 x 1600, then yes, but just barely.

One thing to remember is that the new consoles will still be shooting for 1080p. Plus, they're still a year away, plus it will take developers time to get used to them, so I don't think we'll see them having a significant impact on PCs, well, ever.

I was looking at that one too. How often do you have to put water in there?

To my knowlege, it is maintanence free. Just clean the dust off it. If I am largely mistaken, please by all means correct me. I've literally had this for 3 days. :) My source is this link: http://www.hitechleg...orsair-h60-2013 and the guy at my local computer store that said it was true.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Onkyo Dolby Atmos AV receivers are really solid deals by Sayan Sen Recently we covered great deals on several soundbar models from the likes of Sony, JBL, Samsung and others for really good prices (the lowest in several months). Aside from that we also reported on the Edifier S3000MKII, a hi-fi two-way bookshelf monitor that's available for only $800. Today we bring a list of AV receivers from Onkyo that are available at great prices including the Onkyo NR7100, RZ30, and 8470 (purchase links under the specs table down below). The Onkyo TX-NR7100 and Onkyo TX-RZ30 are both 9.2-channel AV receivers designed for immersive home theater setups but they occupy slightly different tiers within Onkyo’s lineup with the RZ30 positioned as the more advanced model. The TX-NR7100 is a THX Certified 9.2-channel receiver offering up to 100 W per channel (8 ohms, 2 channels driven). It supports Dolby Atmos, DTS:X, and IMAX Enhanced formats, with flexible configurations such as 5.1.4 or 7.1.2 speaker layouts. A key highlight is its built-in Dirac Live Room Correction which should help optimize sound based on your room and its acoustics. In comparison, both models share several core capabilities though the RZ30 is geared toward enthusiasts seeking more precise calibration and system flexibility, while the NR7100 is positioned as a slightly more accessible, value-focused option with strong all-round performance. The technical specs of the RZ30 and NR7100 9.2 AVRs are given in the table below: Specification Onkyo TX-RZ30 Onkyo TX-NR7100 Power Output (FTC, 2ch driven) ~100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) 100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) Dynamic / Peak Power 9 × 170 W (6Ω, 1kHz, 1% THD, 1ch driven) 220 W/ch (6Ω, 1kHz, 10% THD, 1ch driven) Frequency Response 5 Hz – 100 kHz (+1/-3 dB) 10 Hz – 100 kHz (+1/-3 dB) THD 0.08% 0.08% Room Correction Dirac Live (full bandwidth) Dirac Live (with AccuReflex support) Immersive Audio Dolby Atmos, DTS:X, IMAX Enhanced Dolby Atmos, DTS:X, IMAX Enhanced Speaker Layout Support Up to 7.2.2 / 5.2.4 / 9.2 processing Up to 7.2.4 / 5.2.4 / 9.2 processing HDMI Inputs / Outputs 6 inputs / 2 outputs (eARC) 6 inputs / 2 outputs (Main + Sub/Zone 2) HDMI 2.1 Support 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC Video Formats HDR10+, Dolby Vision, HDCP 2.3 HDR10+, Dolby Vision, HDCP 2.3 Streaming / Network Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Get them at the links below: Onkyo TX-RZ30 9.2-Channel AV Receiver: $797.00 (Sold and shipped by Electronic Expo) Onkyo TX-NR7100 9.2-Channel AV Receiver: $699.00 (Sold and shipped by Adorma) Onkyo TX-8470 2 Ch Stereo Receiver: $449.00 (Sold and Shipped by Adorma) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links or authorized dealer links (at the time of article publishing); ensure that you purchase from such links only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • A different thing with Russia. When you say is it better, depends on things. It is better that we don't have the E.U making rules and laws that have nothing to do with them. Is the trading part better? No, that is really mucked up, but then we knew that was going to happen and we would have make agreements, like we do with other parts of the world. Freedom of movement is certainly better, but could be improved, we still need more control over our borders. do you live in the U.K?
    • So what am I quoting from them? I never listened to what Farage or his cronies said. I wanted the U.K to leave the E.u years before the referendum and it had nothing to do with Farage and his cronies. So what country do you live in? Did we work much better together? We were always at logger heads with the E.U because we disagreed with them so much. Maggie was always on at them. I would have thought the E.U was glad to get rid of us as we stopped the integration or made it a two tier. Now without us they can integrate more. I would not have voted out if it was just a trading block and we can still work together on somethings.
    • MPC-BE 1.9.0 by Razvan Serea Media Player Classic - BE is a free and open source audio and video player for Windows. Media Player Classic - BE is based on the original "Media Player Classic" project (Gabest) and "Media Player Classic Home Cinema" project (Casimir666), contains additional features and bug fixes. The BE mod (Black Edition Mod) is a skinned version of Media Player Classic Home Cinema, much better looking than the plain old MPC. MPC-BE 1.9.0 changelog: Splitters Fixed crashes in some situations. AudioSplitter Added support for the RF64 format. Fixed reading of channel layout for some WavPack files. Added support for ID3 tags for Wave64 files. Unknown Wave64 chunks are now ignored. AviSplitter Added support for 'y408' video. Improved support for 'HEVC' video. FLVSplitter Added support for VVC video. MP4Splitter Improved handling of corrupted files. MatroskaSplitter Expanded support for V_UNCOMPRESSED video codecs. Fixed support for frame rotation (ProjectionPoseRoll). Improved support for "V_MS/VFW/FOURCC / HEVC". MpcDvdVideoDecoder Fixed conversion to YUY2. Fixed display of menus for some DVD-Videos. RoQVideoDecoder Output in NV12 and YV12 formats is allowed. Full range is used. MPC Video Decoder RGB32 format will be output as a top-down bitmap by default. Added support for the "IID_MediaSideDataDOVIMetadataV2" interface. Removed support for the deprecated "IID_MediaSideDataDOVIMetadata" interface. Fixed retrieving the name of the video adapter when using NVDEC. Fixed crashes in some situations. MPC Video Converter Added support for AYUV video format. MpcAudioRenderer Improved input format validation. Optimized retrieval of supported formats for exclusive mode. Added the "Keep audio device active when paused" setting. Fixed crashes and freezes in various situations. Subtitles Added the ability to open the properties of an external subtitle renderer in the "Subtitles" settings panel. Fixed external subtitle connections for VSFilter. Fixed a crash when rendering PGS/SUP subtitles when using AVX2. YouTube Improved support for yt-dlp. The built-in YouTube parser is no longer used. Player The HTTP read strategy has been changed. If the playlist contains one entry, more key combinations can be used to control the player (jump through chapters, adjust volume). Improved support for reading ASX playlists. The translation of the MediaInfo report for Chinese, Korean and Japanese has been removed. Added blocking of 32-bit filter "PICVideo Lossless JPEG Decompressor" (pvljpg20.dll), because it crashes. Added blocking of the system filter "AVI Decompressor", which will eliminate the crash of VFW codecs. Fixed a rare crash when using the "/slave" key. Fixed a crash when getting a list of fonts for OSD. Added the ability to load an external audio file using hotkeys. Fixed opening a network path starting with \?\UNC. The "Determine duration when adding" playlist setting now works for YouTube video URLs. The "Online media services" settings panel has been redesigned. Added a "Merge files using FFmpeg" option to the file saving dialog. This option is activated when playing multiple streams obtained using yt-dlp. Added loading of local .dpl playlists ("DAUMPLAYLIST"). Fixed a hang when the user closes the player during the URL opening process. Various interface fixes. Installer Updated MPC Video Renderer 0.10.5. Updated MPC Script Source 0.2.17. Added MPC Image Source 0.3.6. Translations Updated Japanese translation (by tsubasanouta). Updated Chinese (Traditional) and Dutch translation (by beter). Updated Romanian translation (by Andrei Miloiu). Updated Hungarian translation (by mickey). Updated Turkish translation (by cmhrky). Updated German translation (by Klaus1189). Updated Chinese (Simplified) translation (by wushantao). Updated Italian translation (by mapi68). Updated Korean translation (by Hackjjang). Updated Chinese (Traditional) (by udfbe). Updated libraries dav1d 1.5.3-6-g04b69f9; ffmpeg n8.2-dev-1857-g4653e68aab; libpng git-v1.6.55-9-g7d52a8087; Little-CMS git-lcms2.18-26-gf739cda; MediaInfo git-v26.05-38-g702c9b7fd; ZenLib git-v0.4.41-91-g073f297; zlib 1.3.2. Download: MPC-BE 64-bit | Portable MPC-BE 64-bit | ~20.0 MB (Open Source) Download: MPC-BE 32-bit | Portable MPC-BE 32-bit Link: Media Player Classic - BE Home Page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Apple reportedly looks to blacklisted Chinese memory chips as RAM prices climb by Karthik Mudaliar Image via Apple Apple is reportedly trying to get a clearance from the Trump administration to buy memory from ChangXin Memory Technologies (CXMT) to get some relief from soaring DRAM prices. As per a report by the Financial Times, Apple approached the Commerce Department more than a month ago and also spoke to other officials and allies in Washington. For starters, CXMT is a company that's already been placed on the Pentagon's list of Chinese military companies. The Chinese company is the country's top DRAM maker. For Apple, the timing is certainly awkward but not surprising. Tim Cook had recently warned that Apple would have to raise prices because AI companies are buying up large amounts of memory for data centers, and just like that, Apple raised MacBook and iPad prices. Micron also recently revealed that customers have committed billions of dollars to secure memory supply years in advance, which shows us how aggressive securing infrastructure has become. This gives suppliers such as Samsung, SK Hynix, and Micron more leverage, while pushing hardware makers to look for alternatives. CXMT is one of those alternatives, but not the simplest one. Apple has spent many years trying to diversify parts of its supply chain away from China, especially for final assembly, while still depending heavily on Chinese manufacturing and suppliers. Even domestic brands from China are moving towards CXMT and YMTC instead of relying on Samsung, Micron, and SK Hynix. For Apple, though, it would invite more scrutiny than local Chinese companies. For now, this is more like a lobbying effort rather than a confirmed supply deal. There's no official statement from either of the parties. What is clearer, though, is the pressure behind such a request. AI demand has certainly made hardware a bottleneck, and companies are trying everything they can to bring things back to normal, even if that means making politically sensitive choices. Source: Financial Times
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      498
    2. 2
      +Edouard
      227
    3. 3
      PsYcHoKiLLa
      149
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!