Which of these monitors sizes should I get?  

31 members have voted

  1. 1. 1080? 1440?

    • 1080
      7
    • 1440
      24
  2. 2. What size monitor?

    • 23
      2
    • 24
      7
    • 25
      0
    • 26
      1
    • 27
      21


Recommended Posts

Right now I believe I am using: http://www.newegg.com/Product/Product.aspx?Item=N82E16824009145.When I do finally get a new computer I may pick http://pcpartpicker.com/part/asus-monitor-pb278q. Think the change from what I use now to what I may eventually get is overkill? Also if your curious as to my GPU, a 7970 with 3 GB of VRAM.

If you all wish to suggest other monitors fine but a few things:

- 23 - 27 inches (widescreen)

- At the very least the resolution should be 1080p

- DVI/VGA & HDMI

- I am colorblind (red-green), I don't know how much that would effect me being able to tell a difference between LED or not. Or TN/IPS

Link to comment
https://www.neowin.net/forum/topic/1138594-1080-1440p/
Share on other sites

You should go with 1440p if you can at 27-inches, but note that it will be a hit in performance on your GPU compared to 1080p. And yes I believe being colorblind you will be able to still tell the difference of IPS over TN, especially in viewing angles

Link to comment
https://www.neowin.net/forum/topic/1138594-1080-1440p/#findComment-595544018
Share on other sites

There are people on here who are knowledgeable about monitors, so I will let them offer you technical advice. But as far as size goes: I own a 27" and I can't imagine going back to anything smaller. I'd also recommend mounting your monitor on a wall if possible. It looks great and frees up desk space.

I think Dell make pretty amazing IPS monitors, but the 27" ones are pretty expensive. What kind of money were you looking at spending?

Link to comment
https://www.neowin.net/forum/topic/1138594-1080-1440p/#findComment-595544020
Share on other sites

Hopefully less than $700 I'd think. I may play the games in 1080 but use the 1440 for other uses.

I'll assume you mean $700USD. For that you should be able to get one of those Dell 27" IPS monitors I mentioned.

Link to comment
https://www.neowin.net/forum/topic/1138594-1080-1440p/#findComment-595544048
Share on other sites

Should definitely be able to get something like that for under $700 ... Bought my 55" LG 1080p HDTV that I use for my system for $800....

Exactly, I was gonna say the same idea. 27 inch is small, I couldn't imagine playing games on something that small.

I play games in 3D on the big screen, also DualPlay. Gotta love LG.

Link to comment
https://www.neowin.net/forum/topic/1138594-1080-1440p/#findComment-595545386
Share on other sites

Gee, thanks, that cleared up everything. :rolleyes:

Massive pixels, it looks horrible once you're used to a higher DPI monitor (109 vs 82 DPI in this case, that's a 33% difference),

Honestly though, comparing a better monitor to your current one is the only way you'll notice this.

Link to comment
https://www.neowin.net/forum/topic/1138594-1080-1440p/#findComment-595546000
Share on other sites

Should definitely be able to get something like that for under $700 ... Bought my 55" LG 1080p HDTV that I use for my system for $800....

HDTV pixel pitch is horrible though, especially at 55", you aren't even talking about the same class of display as a true monitor.

Link to comment
https://www.neowin.net/forum/topic/1138594-1080-1440p/#findComment-595546008
Share on other sites

1080p on anything larger than 24" is horrendous. even a 24" 1080p is pushing it.

Samsung Syncmaster 2494 here and is not bad. Yes, it could benefit with more Resolution, but since I use it for distant video and gaming I find it pretty amazing.

Now, regarding the post. Yeah, go 27" and 1440p.

Link to comment
https://www.neowin.net/forum/topic/1138594-1080-1440p/#findComment-595546054
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Those extra reboots are related to the UEFI Secure Boot certificate update thing.
    • Hands on with the ProtoArc EM25: Affordable ergonomic mouse that focuses on the right things by Taras Buria ProtoArc is known for making all sorts of office products with a big focus on ergonomics and comfort. Its latest product, the EM25, promises a comfortable-to-use, affordable, and customizable mouse. We took one for a spin; here are our impressions. The ProtoArc EM25 is a $49.99 mouse, but right now, during Prime Day 2026, you can get it for just $37.99. Right off the bat, you can see that the EM25 is inspired by Logitech's MX Master lineup and the legendary MX Master 3/3S. Its shape and proportions are very similar, so for a person with large hands (right-handed person, mind you), the EM25 is very comfortable to use. The mouse fills the palm, and the thumb rests on a small extension, giving your wrist a small tilt to reduce strain. The mouse is made of black plastic without any coating, eliminating long-term wear concerns. However, I can see the main buttons and other areas you touch the most getting polished over time. Despite its size and bulk, the mouse is not too heavy. It weighs about 100 grams, which is significantly less than the MX Master 3S and its successor. It is no lightweight gaming mouse by any means, but it is not excessively heavy like the MX Master 4. The EM25 has a built-in storage for its USB dongle. It is a cleverly made magnetic flap that you open by simply pressing on it. Next to the flap, you will find the on/off switch, the 1,000 Hz sensor, and a DPI button (up to 8,000 DPI). I find the DPI button location a bit odd, and I would prefer it somewhere below the main scroll wheel. Still, given that I never change DPI on my mice, I will let it pass. What is more important is that, unlike MX Master 3/3S/4, the device switch button is located below the left-click button, which allows you to switch devices without lifting and flipping the mouse. For a multi-device setup, this is a perfect solution: the button does not require too much effort to use, it does not get in your way, but it is also easily reachable with your thumb. The main scroll wheel has two modes: ratcheted and free-flow. You can only change between them with a bright orange button (I like this little touch of color), which is sprung and requires some effort to press. The wheel is dead-silent in free-flow mode, but ratched is quite loud and stiff, perhaps even too much to my liking. I can hardly call it deal-breaking, but it will certainly take some time to get used to. The side scroll wheel, it is notched, silent, and pleasant to use. Next to it, you can find a piece of glossed plastic with connection indicators: Dongle, Bluetooth 1, Bluetooth 2, and the low battery indicator. By the way, the built-in battery is rechargeable via a USB Type-C cable, which is included. It is sleeved and has an orange velcro strap to keep it tidy. After using the EM25 for a few weeks, I can say that its main buttons are my absolute favorite. They have very pronounced clicks, which feel great with just the right amount of force required to register a press. I would say they feel like something in between regular mouse clicks and silent ones. You can hear and feel the springy switch, but it is not sharp or loud to the point of annoying you. As for back/forward and device switch buttons, they are very clicky and quite noisy. Unfortunately, there are no extra buttons that you can map to specific things like in the MX Master lineup. Besides great primary clicks, another thing I like about the EM25 is its 1,000 Hz sensor. In the world, where Logitech still uses 125 Hz sensors in $100+ mice, seeing a much faster sensor in a mouse that costs three times less is very refreshing. Also, all the settings and customization you make are stored on-device, and you do not need to install any software. Just open the web-based app and change all that you need. Speaking of customization, you can remap what buttons do, adjust the DPI, and the sensor speed. Sadly, gestures are not supported, but you can still map pretty much anything to each button, including shortcuts, media buttons, and more. I also recommend using software like XMouseControl, as it will let you remap the side scroll wheel. At the end of the day, the ProtoArc EM25 is a great mouse. Clearly inspired by the MX Master lineup, it takes the best of it and complements it with a much more wallet-friendly price tag, significantly better sensor, on-device memory, a built-in storage for the dongle, and more (it fixes everything that I complained about the MX Master 4 recently). And for only $37.99 during Prime Day, the EM25 is an easy recommendation. Buy ProtoArc EM25 mouse - $37.99 | 24% off with Prime As an Amazon Associate, we earn from qualifying purchases.
    • Pretty nice tool, thanks
    • Indeed. But note that this has Wifi7, HDMI 2.1, BlueTooth 5.4, and 5G Ethernet, so even in the additional features list this bundle blows the Steam Machine away. And, with the money saved, one could improve this dramatically.
  • Recent Achievements

    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      460
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      107
    4. 4
      Michael Scrip
      83
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!