Why Does YouTube's throughput suck so bad?


Recommended Posts

Over the past few months I've grown more and more frustrated with YouTube. Regardless of the device or WiFi I use, the buffering and watch-ability is simply awful.

I've got an iPhone and a Samsung Galaxy tablet that connect to both my home and work WiFi Both experience the same laggy, it-plays-5-seconds-at-a-time between buffering. I was able to find a iOS app that lets me lower the resolution from HD to "Low". This helps a bit but I still encounter issues.

Anyone else have similar experiences/frustrations?

I've had this issue with VerizonFIOS and Comcast ISPs. Also, and I probably should have mentioned this; Vimeo runs as smooth as butter in HD. No issues. It's gotta be YouTube. ...right?

Nope never had issue one with youtube bandwidth

Do you have a specific video your having issues with you can link too? Some of the major ISP use their own caching server for youtube, that could be your problem?

I would rightclick on a video and get the info, what speed are you getting. I would also again from rightclick on video to a speedtest - what does that show?

post-14624-0-87586700-1361996596.jpg

REJECT/DROP 173.194.55.0/24

REJECT/DROP 206.111.0.0/16

(for the uninformed, /16 and /24 is not a range, but a subnet class) ie, 206.111.0.0 - 206.111.255.255 = /16)

Problem solved, was posted on reddit just this week. I did it myself and everything loads instantly now on my 85mbit FiOS line vs before laggy as ever. This affects all the feeds on youtube/vimeo, so all will be well. It can be confirmed by adding and removing with tests before after and then removed after again.

Time Warner and Verizon have this issue, no one is quite sure the absolute cause, but those servers your blocking are google and vimeo servers that most likely handle content throttling. When they are blocked you download directly from the source, ie; google data center.

Use caution as you are blocking a wide range of ip address locations. No one has reported any adverse effects yet.

Linux commands below; (Advanced Firewall on Windows Vista or higher can handle this also)

sudo ipfw add reject src-ip 173.194.55.0/24 in

sudo ipfw add reject src-ip 206.111.0.0/16 in

Source; http://www.reddit.co...50w8x?context=1

Could also be shoddy ISP DNS caching, I used to have issues with 1080 YT videos till I stopped using Comcast's DNS for a couple of servers that were closer to me, took a few days to notice the difference because like a dork I forgot to run ipconfig /flushdns after making the changes

REJECT/DROP 173.194.55.0/24

REJECT/DROP 206.111.0.0/16

Problem solved, was posted on reddit just this week. I did it myself and everything loads instantly now on my 85mbit FiOS line vs before laggy as ever. This affects all the feeds on youtube/vimeo, so all will be well. It can be confirmed by adding and removing with tests before after and then removed after again.

Time Warner and Verizon have this issue, no one is quite sure the absolute cause, but those servers your blocking are google and vimeo servers that most likely handle content throttling. When they are blocked you download directly from the source, ie; google data center.

Use caution as you are blocking a wide range of ip address locations. No one has reported any adverse effects yet.

can you elaborate on this? i also have this Youtube issue. you sit there and constantly have to wait for youtube to buffer. oh, you wanted to watch that 30 second clip? that'll be 5mins of buffering...

Anyone else have similar experiences/frustrations?

No where near as well educated as Budman in wifi, bandwidth, or any thing of the sort as, but I've never had any of buffering or lag watching stuff on youtube

I just downgraded to 30meg last month as I was effectively wasting money on 120

Edit Please disregard my post

I didn't realise we were talking about US broadband, as a UK resident I don't know your infrastructure

can you elaborate on this? i also have this Youtube issue. you sit there and constantly have to wait for youtube to buffer. oh, you wanted to watch that 30 second clip? that'll be 5mins of buffering...

See; http://www.reddit.com/r/technology/comments/13kmvd/have_time_warner_internet_but_can_barely_stream/c750w8x?context=1

Couple posts down.

I was having problems last Spring... found out my modem was not fully supporting all the channels offered by my ISP. Purchased a new modem and am taking full advantage of the offered bandwidth.

"all the channels"? what's that mean?

I also confirmed the above fix on my works Verizon MPLS connection, amazing it was. :) I always just dealt with the slow YouTube thinking there was nothing could be done about it till I stumbled on the reddit post made this week.

Hi Klownicle, can you elaborate on how to implement this fix? Thanks!!!!

See; http://www.reddit.co...50w8x?context=1

Couple posts down.

from what i gathered in the post, i just need to add the 206.x.x.x/16 space in the windows firewall, right? i just added a Deny rule on my work laptop. Do i also need to do the other 173 range that you posted?

Also, some people were doing this in their router's IP tables, but i'm not so sure i can do that.

from what i gathered in the post, i just need to add the 206.x.x.x/16 space in the windows firewall, right? i just added a Deny rule on my work laptop. Do i also need to do the other 173 range that you posted?

Also, some people were doing this in their router's IP tables, but i'm not so sure i can do that.

Someone linked to a good guide the other day, but I'm not able to find it at this time.

You need to go into your advanced firewall for windows, create a outbound rule, choose custom, all programs, all ports, tcp for protocol, enter address lines as 206.111.0.0/16 etc, and finish.

It should look like below for 206.111.0.0/16 in your advanced firewall if done right.

firewall_settings.png

The 173 subnet class c is for vimeo if I read correctly, I just used google in the above example. And its 206.111 not 206.x

And IpTables wise, routers like the Actiontec supplied by FiOS allows for GUI Web Access for advanced filtering.

So if that blocking works, then yes its a caching issue with the verizon and timewarner peering caches.

Sure you can block those networks, and then you should bounce to some other source.

I am not sure I would jump on blocking a /16 like that, but if that whole block is just used for cache - then its not going to hurt anything. As long as your aware if you run into connection issues sometime in the future, verify if on that netblock, etc.

"all the channels"? what's that mean?

His issue has nothing to do with youtube but his connection speed. He probably switched to a docsis 3 modem, which needs at least 4 channels to bond with in order to take advantage of the higher tier offerings. This shouldn't have been a problem to begin with unless nobody informed him of upgrades or he ignored letters sent out.

Virgin Media over here have a similar issue - there's a thread on their forums that's been going on for over a year now.

They run caching servers, but those servers don't have enough capacity to deal with the number of requests. Which results in me having a 100mb connection and not being able to stream a standard def video from YouTube!

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • draw.io Desktop 30.2.6 by Razvan Serea draw.io desktop is a downloadable security-first diagramming application that runs on Windows, MacOS and Linux. Creating diagrams in the desktop app doesn’t need an internet connection. This is useful when you are disconnected or when you must create diagrams in a highly secure environment, where data protection is of the utmost importance. When you use the draw.io desktop app, your diagrams will be stored on your local device. Because this is a stand-alone application, also designed to run offline, there are no interfaces to cloud storage platforms available. Of course, you can still store your diagrams in folders that are synchronised to your cloud storage if you wish. Easy-to-use diagram editor The draw.io apps work just like the office and drawing tools you are used to using. Drag and drop shapes from the shape libraries and drag to draw connectors between them. Drag connectors to add waypoints and set a precise shape and position, or let them reroute automatically. Double click and start typing to add a label to anything. Create tables and swimlane flows with a familiar tool. Style shapes and connectors with customisable palettes, sketch options, fonts and text formatting tools. Search for shapes, including in open-source icon libraries. Use our vast libraries of shapes and templates, organised into logical categories, to create a range of diagrams and infographics. Generate diagrams from text descriptions using our smart templates. Diagram faster with keyboard shortcuts. draw.io Desktop 30.2.6 changelog: Uses electron 42.5.0 #2452 Updates to draw.io core 30.2.6. Download: draw.io 64-bit | Standalone (Open Source) Download: draw.io 32-bit | ARM64 | ARM64 Standalone Links: draw.io Home Page | Project page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      499
    2. 2
      +Edouard
      213
    3. 3
      PsYcHoKiLLa
      146
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!