Is it possible to run a two monitors (one on the gpu, one on the cpu)?

By bucko
in Hardware Hangout

 Share

Recommended Posts

Mentor

bucko

Posted
Posted

Hi I am wondering if it is possible to run two monitors from the GPU and CPU. I tried running them both on my graphics card but it never worked. It only seems to work with one. I read that one of the ports only has enough power for one?

So I thought maybe I could run one of the CPU and the other on the GPU? My motherboard has a Monitor output but is it possible to enable them both in the bios? Or can it only run either the gpu or the cpu gfx at one time (the i7 3770K has onboard graphics)? I can only see the ATI in the device manager but if I take the graphics card out the onboard one is displayed after rebooting (to be expected).

If this is not possible I will probably just buy an extra graphics card. All specs in my sig.

Edit, I run windows 8 pro (I actually like it so don't go of topic about that)

Grand Master

Detection

Posted
Posted

I said my specs are in the sig, and I said it didn't work when it had two monitors in the GPU. Did you read my OP?

Erm, of course I read it, I don't have sigs enabled though, so list your specs

And explain what you did when you failed to enable 2 displays

Untitled.png

Veteran

philcruicks

Posted
Posted

To answer your question no, once a PCI-E graphcis card is plugged in the onboard graphics (be that old school intel mobo grapics or new schoole CPU integrated graphics) are disabled.

However there is no way your GPU can't power 2 monitors itself...as mentioned it should be able to do 4.

You must have a setting mis-configured. or old drivers....that or your card is faulty...in which case send it back.

Veteran

philcruicks

Posted
Posted

Just about every modern GPU can run 2 displays natively, for 3 you might need to connect to a display port if using just 1 GPU, but for 2, simple job of connecting and enabling

Exactly, I think even my GPU from about 2003 could do dual screen.

but yes if you want 3+ monitors you'll need either dual cards or eyefinity with display ports.

Mentor

bucko

Posted
  • Author
Posted

My specs are:

PC: Intel Core i7 3770K Quad Core IvyBridge, Asus P8Z77-V LK, 8GB DDR3, ATI Radeon R6950.

I don't recall it appearing in the display propties as two monitors when they both are on the GPU. But I will try again.

Enthusiast

SinsOfCube

Posted
Posted

Are you perhaps using a DVI to VGA cable on one or both monitors?

The AMD Radeon 6950 has 2 DVI connectors at the back, but one is DVI-I and the other DVI-D. The DVI-I connector has both a digital and an analog signal, which means only the DVI-I-connector can use a DVI-to-VGA cable.

So you need at least 1 monitor that has a DVI, HDMI or DisplayPort connection, if the other monitor only has VGA

Grand Master

Detection

Posted
Posted

My specs are:

PC: Intel Core i7 3770K Quad Core IvyBridge, Asus P8Z77-V LK, 8GB DDR3, ATI Radeon R6950.

I don't recall it appearing in the display propties as two monitors when they both are on the GPU. But I will try again.

Ok, so what are the 2 connections from the GPU to the displays ?

DVI / HDMI or DVI / DVI etc etc

What cables are you using ?

If both displays using either of the above ports are connected and turned on, then Windows should see them in display properties shown in my screenshot

EDIT - And what are the 2 display models ?

Experienced

HellboundIRL

Posted
Posted

Yes you should be able to, I'm running 4 monitors off my graphics card and a 5th off the onboard graphics with no problems, just enabled it in the bios and windows picked it up.

Mentor

bucko

Posted
  • Author
Posted

Thanks for the replies so far.

My main monitor is a DellST2410 that is hooked up on DVI on the first availble DVI port.

The second monitor is just an old videoseven VGA widscreen using an adapter to DVI, I know it's not the greatest make compared to my dell but thought it would make good use for a second monitor (so I can have other stuff open while I am playing games on my main monitor).

It does actually now apper in display properties but won't let me enable it.

extradisplay.png

extradisplay2.png

Are you perhaps using a DVI to VGA cable on one or both monitors?

The AMD Radeon 6950 has 2 DVI connectors at the back, but one is DVI-I and the other DVI-D. The DVI-I connector has both a digital and an analog signal, which means only the DVI-I-connector can use a DVI-to-VGA cable.

So you need at least 1 monitor that has a DVI, HDMI or DisplayPort connection, if the other monitor only has VGA

I think this might be my problem by the sounds of it.

Enthusiast

SinsOfCube

Posted
Posted

So try switching the cables around, also make sure you reboot after swapping them around. Windows doesn't always allow you to configure your monitors properly if they weren't connected during boot, not sure if this changed with Windows 8.

Grand Master

Detection

Posted
Posted

So try switching the cables around, also make sure you reboot after swapping them around. Windows doesn't always allow you to configure your monitors properly if they weren't connected during boot, not sure if this changed with Windows 8.

This ^^

DVI-I should be the one connected to your VGA display as it can carry analogue signals

DVI-D can only carry digital

VGA is analogue

Mentor

bucko

Posted
  • Author
Posted

So try switching the cables around, also make sure you reboot after swapping them around. Windows doesn't always allow you to configure your monitors properly if they weren't connected during boot, not sure if this changed with Windows 8.

Yer I just tried switching them around. The second monitor did detect in Windows but it did not output anything (I set the correct resolution and extended the displays) but nothing however it was listed in device manager. Just kept getting no signal detected.

Grand Master

Detection

Posted
Posted

Yer I just tried switching them around. The second monitor did detect in Windows but it did not output anything (I set the correct resolution and extended the displays) but nothing however it was listed in device manager. Just kept getting no signal detected.

Are you sure the cable you are using for the VGA display is DVI-I ?

Check here

http://www.pcadvisor.co.uk/how-to/pc-peripheral/3365585/how-tell-dvi-i-dvi-d-cables-apart/

Mentor

bucko

Posted
  • Author
Posted

You're not plugging your monitor into your CPU. Your motherboard has an onboard GPU. Thus you have two separate GPUs.

Is your monitor powered on? Have you tried another monitor? or tried that monitor on another computer?

I was under the impression the CPU had an on-die GPU, http://www.anandtech.com/show/5771/the-intel-ivy-bridge-core-i7-3770k-review/8 and the motherboard port was just to connect the display to it.

Yes the monitor is on, not tried another monitor but will try it on another PC to make sure it's working.

Enthusiast

droolingmonkey

Posted
Posted

I've had the onboard (i7) graphics and an add on gpu (560GTX) both working concurrently - I wanted to use the onbooard for mornal, unintensive windowsie stuff on one screen, and the higher stress stuff (gaming, etc) on the GPU.

It did work, but actually it caused my media center playback to stutter, even on the other screen. Went back to running them both off the graphics card and it works so so so much better. Onboard has been disabled again.

(as a note, I also have sig's hidden, as I suspect many here do, so was unable to see your specs)

Veteran

nub

Posted
Posted

I was under the impression the CPU had an on-die GPU, http://www.anandtech...-3770k-review/8 and the motherboard port was just to connect the display to it.

Yeah you're right. I forgot new CPUs have integrated GPUs. It just sounds weird.

Mentor

Vvo

Posted
Posted

the z77 has lucid virutre which enables hybrid gpu on desktops,in order to use this feature you have to plug you display cables onto the mobo and not on to the gpu

This topic is now closed to further replies.
 Share
Go to topic listing

  • Posts

    • Microsoft Edge gets tons of security features, including AI model that can see your screen

      By tsupersonic · Posted

      did they not learn anything from the Recall fiasco?
    • Internet Download Manager (IDM) 6.43 Build 2

      By Copernic · Posted

      Internet Download Manager (IDM) 6.43 Build 2 by Razvan Serea Internet Download Manager (IDM) is a tool to increase download speeds by up to 8 times due to its smart dynamic file segmentation technology. Unlike other download managers and accelerators, Internet Download Manager segments downloaded files dynamically during download process, and it reuses available connections without additional connect and login stages to achieve the best possible acceleration performance. Comprehensive error recovery and resume capability will restart broken or interrupted downloads due to lost connections, network problems, computer shutdowns, or unexpected power outages. All popular browsers are supported IDM integrates seamlessly into Google Chrome, FireFox, Microsoft Edge, Opera, Safari, Internet Explorer, Maxthon and all other popular browsers to automatically handle your downloads. You can also drag and drop files, or use Internet Download Manager from command line. The program supports proxy servers, ftp and http protocols, firewalls, redirects, cookies, authorization, MP3 audio and video content processing. IDM includes web site spider and grabber IDM downloads all required files that are specified with filters from web sites, for example all pictures from a web site, or subsets of web sites, or complete web sites for offline browsing. It's possible to schedule multiple grabber projects to run them once at a specified time, stop them at a specified time, or run periodically to synchronize changes. Easy downloading with one click When you click on a download link in a browser, IDM will take over the download and accelerate it. You don't need to do anything special, just browse the Internet as you usually do. IDM will catch your downloads and accelerate them. IDM supports HTTP, FTP, HTTPS and MMS protocols. Changes in Internet Download Manager 6.43 Build 2: Resolved the problem that caused a "403 Forbidden" error when downloading some files Fixed a problem causing IDM download panel not to appear on some websites Fixed a bug that caused a crash when converting some TS files to MP4 Download: Internet Download Manager 6.43 Build 2 | 11.9 MB (Shareware) Links: Internet Download Manager Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Windows 11 is getting redesigned taskbar settings in new build

      By Captain_Eric · Posted

      It's in Experimental (26H2). Settings->Windows Update->Windows Insider Program. Then a) select Experimental, b) below that, select "Advanced Options" (where you will see the three options for "Experimental" builds -> select 26H2 (name change from 25H2 is rolling; so might be 25H2)
    • Why it's almost impossible to produce a smartphone in the United States

      By Shadow8 · Posted

      I am not a US citizen nor a Trump fan. Respect to both left and right. But I will, for the sake of fun, predict something for my own. There will come a day when the US and China will collide like titans ( over Taiwan or anything else ). Then, on that day, some people in this comment section will realize how good an idea it was to become independent in areas like that. ( Or atleast try )
    • Microsoft Edge gets tons of security features, including AI model that can see your screen

      By Usama Jawad96 · Posted

      Microsoft Edge gets tons of security features, including AI model that can see your screen by Usama Jawad Microsoft Edge may not be the most popular browser out there, but it does receive quite frequent updates that sometimes bring surprising new features and axe others that are not as popular. Now, Microsoft has detailed some of the new security enhancements that it has introduced in Edge for Business, typically used by commercial customers. Microsoft has emphasized that security features are baked into Edge for Business and offer native integration with security and governance tools like Defender and Purview. Browser sessions are governed by default on managed devices but can also be governed through dedicated work profiles on unmanaged devices. An important aspect in this area is controlling the use of shadow AI. We have talked about this before, but it essentially restricts employees from using unsanctioned AI apps through data loss prevention (DLP) policies, with Edge redirecting them to trusted AI services like Microsoft 365 Copilot. This feature, available as a pay-as-you-go (PAYG) license, ensures that confidential data never exits AI boundaries set by your organization in Purview. Additionally, Microsoft also has strong DLP policies for contractors. Contractors leveraging a Entra ID-joined work profile provisioned by their contracting company on a device managed by their actual employer can be restricted from downloading files locally. In such scenarios, the file is saved on the contracting firm's OneDrive rather than being downloaded locally. Another useful Edge security feature disallows copying and pasting from unmanaged locations and apps. Similarly, DLP policies can be configured at a granular level to restrict screenshots or downloading of files from certain locations. In the same vein, IT admins can block the installation of extensions, hosted apps, themes and scripts, and control if users can install extensions from external locations. They can also enable the installation of specific extensions and allow users to request access to certain extensions, so that they can be managed on a case-by-case basis. Finally, Edge for Business now has an on-device AI model that uses computer vision to see what's on your screen and block potentially malicious content immediately. This does not rely on site reputation, as it simply monitors what is being displayed on your screen, which means that it is effective against malicious content that takes over your screen and employs scareware tactics. Since this is an on-device AI model, it does use your system's resources, so it's enabled by default only on devices with at least 2GB of RAM and four CPU cores. You can find more details in the Microsoft Mechanics video here.

  • Recent Achievements

    • Dedicated
      Zeynel earned a badge
      Dedicated
    • One Month Later
      JKR earned a badge
      One Month Later
    • Dedicated
      Asgardi earned a badge
      Dedicated
    • Conversation Starter
      jessse3334 earned a badge
      Conversation Starter
    • Reacting Well
      JuvenileDelinquent earned a badge
      Reacting Well

  • Popular Contributors

    1. 1
      +primortal
      495
    2. 2
      +Edouard
      247
    3. 3
      PsYcHoKiLLa
      154
    4. 4
      Steven P.
      86
    5. 5
      macoman
      65
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!