Recommended Posts

I've bought an entry level desktop and I was wondering what kind of performance I can expect running modern games at 1920x1080.

I've been a console gamer since 95 and while I've always had a PC, its never really been one truly capable of playing games properly.

The desktop currently has

Intel? Core? i7-3770 3.4Ghz

6GB of RAM

2GB AMD RADEON HD 7770

Link to comment
https://www.neowin.net/forum/topic/1142248-my-first-gaming-desktop/
Share on other sites

Lol I will upgrade it in the future, this is my "bare bones" set up. From what I understand the video card is a bit weak, its why I'm wondering how well the system as a whole will fair. Isn't the Titan for people will multiple monitor setups? I mean surely that much memory isn't going to help otherwise?

You mentioned that you bought it - just to clarify did you build it or buy a pre-built desktop from Asus, Dell, etc.? You'll want to be careful if you bought it pre-built, as these systems generally come with weaker PSU's. Just make sure your build it up to spec. before upgrading.

You mentioned that you bought it - just to clarify did you build it or buy a pre-built desktop from Asus, Dell, etc.? You'll want to be careful if you bought it pre-built, as these systems generally come with weaker PSU's. Just make sure your build it up to spec. before upgrading.

It's a pre-assembled build (an old one I think), it mentions a 600W PSU

Here is a compete list of specs

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03542305〈=en&cc=us&taskId=101&contentType=SupportFAQ&prodSeriesId=5295991

If it has a Core i7 3770, it's fairly new, less than a year old...A 600 W PSU is good and all, but there are no technical specs on that site that indicate what kind of load you can put on the 12v rail(s). If it was a decent brand PSU, then you could upgrade to a nice video card, but only way you can tell is if you look at the specs of the PSU (should be on the PSU itself)

It's gong to arrive on Tuesday so I'll have a look, what's the odds of being able to rip the PSU out and put a new one in?

Unfortunately, it's likely that the system has a warranty for the whole thing and therefore sealed. But if that will not be the case then a new PSU shouldn't be too hard to install as long as you plug everything in its proper place.

With another 2GB of RAM and a decent video card, you can expect to play modern games at 1920x1080 with max or high settings.

If you need to, switching out a PSU isn't that hard at all. Just mark or take pictures of what you unplug.

Regarding the warranty, you'll have to look up if upgrading/switching parts will void it.

It's got nice specs, to be honest, I would've gone for an Nvidia card or even buy an additional cheaper Nvidia card. A lot of games now use PhysX which can run on your CPU but would be better run on an Nvidia card.

Here's a nice site which will let you know exactly what power of PSU you'll need/want :

http://extreme.outer...culatorlite.jsp

Replacing the PSU is quite easy as long as it's a roomy case, some cases might limit your access to the PSU, making it impossible to remove without removing/replacing coolers, etc. Have a look inside the case and see if you'll have enough room to remove the PSU before you actually do. The plugs for all the different component from the PSU are all universal so a new PSU should be fine.

First, OEM PC's usually have the crappiest PSU's, no matter what wattage it says on it, most of them will just fry under stress so I'd suggest you to switch that for a decent one.

Secondly like the person above me said the room in the OEM PC box is tight, really tight so you need to get a bit creative fitting new stuff in it.

If it doesn't get out of your budget I'd suggest switching you graphics card to an 79xx series or at least 78xx one (Or what ever Nvidia has in that range). The CPU itself is good enough but if you plan to overclock switch to an K-series one, if not keep the current one. Also stick a couple of more gigs of ram in there and you're good to go.

So nobody knows what kind of fps I can expect? I didn't buy it to get ludicrously high fps at ultra settings, if i did i would have bought one with those kind of specs in the first place. I didn't buy it for that. I'm happy with 30+ FPS at medium/high settings.

Well you would have to google more so the games and the gpu for revieiws.

I would suggest getting a GTX 680 or 690

I've tried googling it however it always seems to be with the 1GB model and either never mentions the CPU or it isn't the same CPU as mine.

What games are you playing exactly? There are reviews out there with similar systems, it's a good reference point. You should've gone another path if you wanted performance - buying prebuilt isn't the way to go. It's usually more expensive, and you don't get what you want necessarily. Also, you'd see better performance if you weren't pushing 1920x1080, that card wasn't designed to push games at the highest resolution/details at 1080p.

I've told everyone I didn't buy it to run them all at ultra settings. I said I'm happy with a mixture of medium/high at around 30Fps, games like Sky rim, Borderlands, Mass Effect 3, ARMA 2/3. I didn't buy it for performance, I bought it to be "adequate"my laptops 5650M manages to run these games at 720 on medium settings, some even at 1080 and still maintain 30-40 FPS. I figured a desktop 7770 would spank a mobile 5650 yet from what the impression I'm getting here is it won't even run solitaire.

I can't be bothered to build my own desktop from scratch, I don't have the patience, no matter how many people point out how easy or cheap it is. I have plenty of disposable income and don't mind paying for the convenience. I would compare it so someone saying I'd save money killing and gutting a pig myself, in still just going to buy ready prepared bacon from the butcher.

dude,your GPU is fine. you'll be able to hit 30fps on high in 1080p on most games. Some games you may have to go to medium,but the visual difference is nothing major. Your CPU is also boss. I wouldn't spend money on anything right now.Maybe in the future when games start pushing your card,you'll be able to get like a 7950 for cheap,and even then,that card will play all those newer games no problem.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft's fast coding model MAI-Code-1-Flash comes to Copilot Business and Enterprise by Karthik Mudaliar Microsoft’s recently announced MAI-Code-1-Flash model is now generally available to GitHub Copilot Business and Copilot Enterprise customers. With this support, organizations can have more centralized policy controls and billing while finally being able to use Microsoft’s lightweight, first-party coding model. According to GitHub’s announcement, Business and Enterprise plan administrators must enable the MAI-Code-1-Flash policy in Copilot settings before developers can access the model. Microsoft says that MAI-Code-1-Flash is for fast, iterative coding work rather than the most demanding architectural or debugging tasks. GitHub’s official model comparison page says that the model is great for "general-purpose coding and writing," while it excels at fast, accurate code completions and explanations Microsoft introduced MAI-Code-1-Flash on June 2 as part of a broader collection of internally developed MAI models. GitHub subsequently expanded support to Copilot CLI, the Copilot cloud agent, GitHub.com chat, GitHub Mobile, Visual Studio, JetBrains IDEs, Eclipse, and Xcode, but said support for managed Business and Enterprise customers was still on the way. In Microsoft’s own benchmark testing, MAI-Code-1-Flash scored 51.2% on SWE-Bench Pro, compared with 35.2% for Anthropic’s Claude Haiku 4.5. Microsoft also claimed that the model used up to 60% fewer tokens on SWE-Bench Verified. Do note that these are vendor-run results rather than independent measurements. The model is billed at provider list pricing under GitHub’s usage-based system. GitHub currently lists MAI-Code-1-Flash at $0.75 per million input tokens, $0.075 per million cached input tokens, and $4.50 per million output tokens. For organizations, the main incentive to use MAI-Code-1-Flash is likely to be efficiency rather than maximum capability. A smaller model that responds quickly and limits unnecessary output is quite useful for repetitive agent tasks at scale, especially after GitHub Copilot’s move toward usage-based billing. The "Flash" model is recommended for fast work and not necessarily for huge repositories with loads of context. It's better if teams compare their output with other larger models, especially if they're working on security-sensitive changes and complex, multi-file work.
    • yes AND no the "original" or plain/normal Optiplex 7010 won't be getting any more new firmware updates BUT the Optiplex SFF/SFF Plus {small form factor}, Micro/Micro Plus & Tower/Tower Plus 7010 editions DO get new updates such as this new one   and here are similar guides from the Dell web site for Dell systems: https://www.dell.com/support/kbdoc/en-us/000390990/secure-boot-transition-faq https://www.dell.com/support/kbdoc/en-us/000347876/microsoft-2011-secure-boot-certificate-expiration
    • AT&T has been spying on US citizens with the NSA for decades.. they just know how to keep it more under wraps.. the evil level is still there.
  • Recent Achievements

    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
    • Week One Done
      tuben earned a badge
      Week One Done
    • First Post
      OffsetAbs earned a badge
      First Post
    • Reacting Well
      OffsetAbs earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      462
    2. 2
      +Edouard
      213
    3. 3
      PsYcHoKiLLa
      157
    4. 4
      Steven P.
      72
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!