Recommended Posts

Hello everyone!

I have a few questions for everyone here.

First, I'll describe my current setup. I have a Motorola Modem provided by Time Warner (Yeah I know, they're the only ones in the area) and two routers. one EA4500 and one E3000.

The EA4500 is currently connected like any normal router setup would be for the home, WAN is to the modem and there rest wireless and LAN.

The E3000 i'm trying to set up as a secondary router (house has dark spots so I'm moving the routers to split the house and cover the most distance).

However, I cannot get the E3000 to talk to the EA4500 no matter what settings I change.

Currently using DD-WRT v24. Set WAN to Disabled, and set the WAN to another "Switch" slot. changed the Local IP to 192.168.1.2. the EA is 192.168.1.1. Under the router IP settings, the gateway and Local DNS are both set to 192.168.1.1, however, this is where it gets tricky.

I also have a Windows Server 2012 build (datacenter). Currently running a Virtual Edition of 2012 Standard.

the Datacenter has AD, and AD-CS, DNS (which isn't configured right because I couldn't get that to work correctly either, keep getting a "waiting for active directory sync" error), Print services, and file and sharing services.

The Standard has Direct Access/VPN installed but I can't get that to configure correctly either. (using Virtual Box for install, DHCP reservation for the two network adapters. (Couldn't get DHCP to work on the server either).

Anyways the server is a whole other issue, right now my main concern is the routers unless getting DHCP to work on my server is a better option than using the routers.

I have been through the walkthrough that DD-WRT has posted on their website for e3000 and it doesn't let me connect, and once I unplug the Ethernet, I loose connectivity until I reset the e3000 (30/30/30) due to lack of DHCP (defaults to the 169.x.x.x address).

I would love some insight into this. I've been working on this setup (server included) for weeks now. I am reluctant to ask for help as I know everyone's time is very valuable, but any help is GREATLY appreciated.

Thank you in advance,

Brent

Link to comment
https://www.neowin.net/forum/topic/1144474-linksys-e3000-and-ea4500/
Share on other sites

Well how are the 2 routers supposed to talk to each other? Do you have them wired up via ethternet or are you trying to do it wirelessly?

The easy way is to run a cable from the EA4500 LAN port to the E3000 LAN and with DHCP and all that disabled. Any wireless client that connect to that AP will get passed on to the DHCP on the network and get an IP and work like normal.

The hard way is setting them up via wireless where you might be using WDS or Repeater Bridge setups. Use cables if you can! :)

This topic is now closed to further replies.
  • Posts

    • But the reality is it will work for people's needs, and they don't care about the technology that makes it. Clearly not everyone's needs, but that low end space where personal laptops were only used to type emails, watch content and browse websites, but they didn't want to do that on a small screen device. Heck, writing that out I can now see the connection and reason it'll do so well. Apple is about experience. If the experience is bad, they don't release it. Low end Windows laptop manufacturers up until this point have not taken that into consideration ever before, so slow laggy usage with brittle slimey plastic shells were common. I hope that the low end space at least creates better physical products that last a bit longer, and if Microsoft get their act together, they could also have a solid OS on such low end hardware that would actually make the experience work for what the hardware was intended for. The fact that the CPU is a "cellphone", sorry mobile phone processor is irrelevant. It's about the experience, and so far, that sounds quite solid.
    • Hello, Bonjour is Apple's implementation of a multicast-DNS service, which allows devices running Apple's software and/or hardware to find each other on your local network.  I believe the Windows version was last updated around 2010. If you do not need it, you can stop and disable the Bonjour service in the Services Control Manager (filename: SERVICES.MSC).  Once you have done that, the operating system will no longer attempt to load the service. Regards, Aryeh Goretsky  
    • This AMD RX 9070 16GB GPU that performs close to Nvidia 5070 is under $600 by Sayan Sen With the memory shortage that's prevalent nowadays, discounts are super-hard to get. As such we post good deals whenever they pop up. Recently, we covered a few great discounts on SSDs wherein you can get a 4TB TeamGroup NVMe PCIe Gen4 drive for just $400 thanks to a special coupon. If you want a faster product but don't need all that capacity, you can also opt for Samsung's 990 PRO 2TB that is on sale for its lowest price in over three months. Let's say though that you are on the hunt for a 1440p gaming card. In that case AMD's RX 9070 non-XT can help, and with its 16GB VRAM, you can also run AI models locally without worrying about bottlenecking (check out our recent 9070 GRE reviews for gaming and productivity to get an idea). The PowerColor Reaper variant of the RX 9070 is currently on sale for just $580 which is a very good price in the current state of affairs (purchase link under the specs table down below). The Reaper cooler on this 9070 uses a triple‑fan design with ring‑blade fans, paired with premium dual ball bearings to extend lifespan and reduce friction. "Intelligent" fan control allows the fans to remain idle at lower temperatures, only spinning up when the GPU is under load. A nickel‑plated copper base makes direct contact with both the GPU and memory modules, helping to spread heat evenly. PowerColor also applies Honeywell PTM7950 phase‑change thermal interface material (TIM), which fills microscopic gaps between the die and heatsink for more efficient thermal transfer. The fan shroud is shorter in height as the firm has made it such that it can be used in certain SFF (small form factor) cases. The technical specifications of the Reaper RX 9070 are given in the table below: Specification Value Stream Processors 3584 Units Video Memory 16GB GDDR6 Memory Speed 20.0 Gbps Memory Interface 256-bit Engine Clock Game Clock: up to 2070 MHz Boost Clock: up to 2520 MHz Bus Standard PCI Express 5.0 x16 Display Connectors 1 x HDMI 2.1b, 3 x DisplayPort 2.1a Maximum Resolution DisplayPort: 7680 × 4320 HDMI: 7680 × 4320 Board Dimensions 289mm × 111mm × 41mm 304mm × 127mm × 42mm (with bracket) Slot 2 Minimum System Power Requirement 600W Power Connectors Two 8-pin PCI Express Get the PowerColor Reaper RX 9070 at the links below (you get only a 90-day warranty on Woot): PowerColor Reaper Radeon RX 9070 16GB Graphics Card (RX9070 16G-A): $579.99 (Sold and Shipped by Amazon US) (Was: $700) PowerColor Reaper Radeon RX 9070 16GB Graphics Card (RX9070 16G-A): $559.99 (Sold and Shipped by Woot US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • Are they marketed as an entry into astronomy or astrophotography? I do astrophotography. With big rigs, lots of computers, cables and headaches. I love it. And by learning this ridiculously complex hobby, I’ve learned about the objects I’m shooting. Astronomy followed from photography.
    • Microsoft confirms Recycle Bin bug across all versions of Windows by Usama Jawad A couple of days ago, we reported that the latest Patch Tuesday update has seemingly resulted in a lot of issues for many users, including OneDrive and Dropbox access problems, BitLocker recovery lockouts, and BSODs. Although Microsoft is yet to acknowledge these bugs, it has confirmed another, relatively smaller issue across all supported versions of Windows. In an update on its Windows Release Health Dashboard, Microsoft has confirmed that after installing June's Patch Tuesday update (KB5094126), you'll experience unexpected behavior when leveraging Recycle Bin. Basically, when you attempt to delete an item from the Recycle Bin, the confirm dialog will show you the internal file name of that content rather than the actual name. For example, the file may be named abc.png, but the confirm dialog will ask if you're sure that you want to permanently delete $Rxxxxx.png from the Recycle Bin. This is pretty much it for the scope of the bug itself; it just displays the wrong name in the confirm dialog. The correct name will be shown in the list view of the Recycle Bin and if you restore the file, it will return with the correct name as well. This issue affects pretty much all supported versions of Windows client and server, including: Client: Windows 11, version 26H1; Windows 11, version 25H2; Windows 11, version 24H2; Windows 11, version 23H2; Windows 10, version 22H2; Windows 10 Enterprise LTSC 2021; Windows 10 Enterprise LTSC 2019; Windows 10 Enterprise LTSB 2016 Server: Windows Server 2025; Windows Server 2022; Windows Server 2019; Windows Server 2016; Windows Server 2012 R2; Windows Server 2012 As things currently stand, Microsoft is working on a concrete solution that will be released in a "future" Windows update. It remains to be seen if the firm will wait till the next Patch Tuesday or roll out an out-of-band (OOB) fix. The good news is that commercial customers can deploy a workaround right now, but they will have to reach out to Microsoft Support for Business for additional details.
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      579
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      75
    4. 4
      Michael Scrip
      72
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!