How do I print envelope ?

[Deep_Level_Shark]

I am using Office 2007 for writing letters.

I want to print Delivery Address and Return Address on the envelope.

my envelope size is 5 inch (width) x 20 inch(length).

How do I print ?

I have a laser printer model: HP LaserJet P1007

I checked Mailing Tab in Office 2007 . There is no predefined (Options) enveloped size to 5 inch (width) x 20 inch(length).

Is there any workaround to print envelope in this situation ? please suggest

[cleverclogs]

Mailing --> Envelopes --> Options --> Envelope Size --> scroll down the list to "custom"

[Deep_Level_Shark]

Mailing --> Envelopes --> Options --> Envelope Size --> scroll down the list to "custom"

I checked ...I can customize envelope size.

but Delivery address and Return address are not in proper in place in print Preview.

Also ...how do I feed envelope into printer ? vertically or horizontally in the feeder.

I find it very much confusing.

Need help.

[Steven P. Administrators]

Like me, you'll probably have to do a few test runs :p Just reuse the same envelope each time until it's in the spot you want it in and presto! :)

If you don't have spare envelopes, cut a piece of A4 to the size of the envelope.

Edit: The preview should show you how to add the envelope.. I'm guessing it will be horizontal though.

[Steven P. Administrators]

My old printer used to have an indicator on where to add an envelope with a little symbol embedded in the tray.

[Brian M. Veteran]

Like me, you'll probably have to do a few test runs :p Just reuse the same envelope each time until it's in the spot you want it in and presto! :)

If you don't have spare envelopes, cut a piece of A4 to the size of the envelope.

Edit: The preview should show you how to add the envelope.. I'm guessing it will be horizontal though.

I gave up trying to do envelopes on my Dell laser after 5/6 attempts at feeding it in and removing crumpled envelopes from the rollers :p.

[cleverclogs]

I checked ...I can customize envelope size.

but Delivery address and Return address are not in proper in place in print Preview.

Also ...how do I feed envelope into printer ? vertically or horizontally in the feeder.

I find it very much confusing.

Need help.

Type the address out. Apply it to the document. You can move the text-box around then.

You can set which way it is fed into the printer in the dialogue box

[cleverclogs]

[Steven P. Administrators]

Cleverclogs!

[Arachno 1D]

If you have lots of envelopes to do you might be better of getting a small label printer