High 8800gtx temperatures, replace GPU thermal paste and pad?

By Draconian Guppy
in Hardware Hangout

 Share

Recommended Posts

Grand Master

Draconian Guppy

Posted
Posted

So i've got a 8800gtx from 2006ish... I was playing hitman absolution and it crashed, this never had happened, so I checked the temperature and it's currently idling around 74c and getting to around 98c and i'm supposing higher cause it crashed.

My q6600 idles around 40c and ambient temperature is 25ish, maybe higher during hot days. Case air flow isn't the best either, but it's a generic case and all I could add was a 20mm (I think?) fan blowing air in, anywho.

I've never replaced a GPUs thermal paste nor pads, I google some videos and found out that it has pads on some parts ( 8 I think) and thermal paste on the GPU, videos show it's fairly easy I just don't know what to buy exactly and what brands and if doing so, will lower my temperatures?

Veteran

Daedroth

Posted
Posted

Graphics cards tend to have a much higher temperature threshold than CPUs or motherboards. I think my old 8800GTX had a threshold of 120C. Actually my 8800GTX started dying last year after owning and using it for years and then it finally gave up the ghost. It kept crashing in games and ultimately not being able to boot the operating system, with lots of graphical glitches. Replacing the card fixed it...so I determined that the 8800 was on its way out.

Grand Master

Draconian Guppy

Posted
  • Author
Posted

Graphics cards tend to have a much higher temperature threshold than CPUs or motherboards. I think my old 8800GTX had a threshold of 120C. Actually my 8800GTX started dying last year after owning and using it for years and then it finally gave up the ghost. It kept crashing in games and ultimately not being able to boot the operating system, with lots of graphical glitches. Replacing the card fixed it...so I determined that the 8800 was on its way out.

Well, I think in this case it has more to do with the bad airflow in my case, because it shutdown after playing for a while (2+ hours), so I guess, heat build up caused it to overheat and shutdown.

Curiously I get those same symptons, it starts to artifact, then won't boot until it cools down I guess.

Also I plan to replace my whole system, so I don't want to spend on another video card.

Veteran

Daedroth

Posted
Posted

Well, I think in this case it has more to do with the bad airflow in my case, because it shutdown after playing for a while (2+ hours), so I guess, heat build up caused it to overheat and shutdown.

Curiously I get those same symptons, it starts to artifact, then won't boot until it cools down I guess.

Also I plan to replace my whole system, so I don't want to spend on another video card.

I can see where you're coming from. I bought a cheap ?60 AMD graphics card (6770 I think), which scores about the same according to GPU benchmark.

Proficient

a1ien

Posted
Posted

You can if you want... Take the cooler off and get the dust out real good. Buy thermal pads if you don't want to re-use the ones on there. The paste on there is very good - so you need to replace it with one of the very best off this list: http://www.xbitlabs.com/articles/coolers/display/thermal-interface-roundup-1_12.html#sect0

It's only liable to buy you 5C, as a wild guess. It's a really big heat spreader and a big die underneath, so you'd want to be sure to use enough paste to cover it.

That's a pretty old card... a GTX 650 Ti Boost (but NOT without the boost) would be a nice upgrade with about 2x the performance at the same power usage.

Grand Master

Draconian Guppy

Posted
  • Author
Posted

I can see where you're coming from. I bought a cheap ?60 AMD graphics card (6770 I think), which scores about the same according to GPU benchmark.

You can if you want... Take the cooler off and get the dust out real good. Buy thermal pads if you don't want to re-use the ones on there. The paste on there is very good - so you need to replace it with one of the very best off this list: http://www.xbitlabs....1_12.html#sect0

It's only liable to buy you 5C, as a wild guess. It's a really big heat spreader and a big die underneath, so you'd want to be sure to use enough paste to cover it.

That's a pretty old card... a GTX 650 Ti Boost (but NOT without the boost) would be a nice upgrade with about 2x the performance at the same power usage.

Yeah like I said above, don't really plan on upgrading just video card...

Well if adding tg-1 thermal grease will make my idle temperature drop from 79*c to 50*c, that would make me a happy camper.

How can I tell if I can still reuse the pads?

Proficient

a1ien

Posted
Posted

Only way to find out is to try it... 79C does seem like a very high idle. You've removed the dust already? If the little voltage regulator chips make don't make good contact with a thermal pad your stability could suffer... so make sure that part makes good contact. 2mm thick pads should be enough.

Grand Master

Draconian Guppy

Posted
  • Author
Posted

Only way to find out is to try it... 79C does seem like a very high idle. You've removed the dust already? If the little voltage regulator chips make don't make good contact with a thermal pad your stability could suffer... so make sure that part makes good contact. 2mm thick pads should be enough.

Yup blew that mother to hell, after blowing it went from 79 to 74/76...

the current pads seem soft still, I was just asking if they needed changing, i've done thermal paste on cpus' but never thermal pads?

Straight from bootup.

fdb4L4S.jpg

  • 2 weeks later...
Veteran

YounGMessiah

Posted
Posted

Older GPUs used pads as well? Anyways, have you applied new TIM yet? If not, I suggest Tuniq TX-4.

And just replace your pads, might as well do both since you plan on keeping this card for a while.

  • 2 weeks later...
Grand Master

Draconian Guppy

Posted
  • Author
Posted

Can you post a picture of the thermal pads? Also, I do believe that you'll need new thermal paste for that card. It's unbelievable that you had that card for almost 7 years and didn't need a thermal paste replacement!

Older GPUs used pads as well? Anyways, have you applied new TIM yet? If not, I suggest Tuniq TX-4.

And just replace your pads, might as well do both since you plan on keeping this card for a while.

As per this http://www.xbitlabs.com/articles/coolers/display/thermal-interface-roundup-1_12.html#sect0 I just bought Thermaltake Tg-1, it takes about 2 weeks to get here ( Honduras, Central America).

Also on the pads, I wouldn't know what brands and specs to get? Could you guys help a fellow out and point me what pads would be the best (sold on amazon.com)

This topic is now closed to further replies.
 Share
Go to topic listing

  • Posts

    • Windows 11 version 26H2 is now available for testing in the latest preview build

      By +TRS-80 · Posted

      Friday Windows 11 preview builds are here. Insiders in the Experimental (formerly Dev) and Beta Channel can download builds 26300.8697 and 26220.8690. My Windows11 device on the Preview Channel just got 26220.8728. My guess is this build is a nightly update from 26220.8690.
    • Traffic has a surprisingly unexpected impact on your surroundings

      By hellowalkman · Posted

      Traffic has a surprisingly unexpected impact on your surroundings by Sayan Sen Image by Radik 2707 via Pexels A collaborative study by researchers from several Israeli institutions found that everyday pollution from traffic and industrial activity measurably changed the atmospheric electric field over the Tel Aviv metropolitan area, providing new evidence of how human activity can influence the lower atmosphere. The research was led by Dr. Roy Yaniv of the Hebrew University of Jerusalem and the Gertner Institute at Sheba Medical Center, Dr. Assaf Hochman of the Fredy & Nadine Herrmann Institute of Earth Sciences at the Hebrew University, and Prof. Yoav Yair of Reichman University. The study also involved Itay Froomer, a student from Hadera High School and the Israeli Museum of Medicine and Science (Technoda), who carried out the work as part of the Ministry of Education's 5-unit physics research track. The researchers focused on the atmospheric electric field under fair-weather conditions. Even in the absence of storms, a weak electric field naturally exists between Earth's surface and the atmosphere. One of the main ways scientists measure this field is through the Potential Gradient (PG), which is the inverse of the vertical component of the electric field. PG is a key part of the global electric circuit, a planet-wide system of electrical currents maintained by thunderstorms and electrified clouds around the world. Scientists have long known that the atmospheric electric field can be influenced by factors ranging from large-scale atmospheric processes to local weather conditions such as dust, fog and clouds. Human-made pollution is also known to play a role, but understanding exactly how urban emissions affect the electric field close to the ground has remained an area of ongoing research. To investigate this relationship, the team analyzed measurements from a newly installed electric field mill, an instrument used to continuously monitor the strength of the atmospheric electric field. The instrument was installed at the Center for Technological Education (Roter House) in Holon and became operational in August 2024. It was funded by Israel's Ministry of Education and the Holon municipality. The electric field mill forms part of a broader monitoring network that includes nearby meteorological stations and air-quality monitoring sites. This allowed researchers to compare electric field measurements with detailed weather data and pollution records to better understand what was driving changes in the Potential Gradient. The study focused on two major urban pollutants: fine particulate matter (PM2.5) and nitrogen oxides (NOx), both commonly produced by vehicle traffic and industrial activity. PM2.5 refers to microscopic airborne particles small enough to remain suspended in the atmosphere for extended periods, while NOx is a group of gases released during fuel combustion. Researchers examined daily, weekly and seasonal patterns in the atmospheric electric field and compared them with changes in pollutant concentrations. Their analysis revealed a clear relationship between NOx levels and changes in the Potential Gradient, particularly during morning and evening rush hours when traffic emissions were at their highest. “What we observe is a direct physical link between emission peaks and electrical variability,” explained Dr. Roy Yaniv. “NOx reduces atmospheric conductivity very quickly, so the electric field responds almost instantaneously during traffic rush hours.” Atmospheric conductivity describes how easily electrical charges move through the air. According to the researchers, nitrogen oxides rapidly alter this conductivity, causing a near-immediate response in the electric field. PM2.5, however, was associated with a delayed response. The researchers attributed this difference to the particles' longer atmospheric residence time, meaning they remain in the atmosphere for longer periods, as well as their different microphysical interactions with surrounding air and atmospheric components. The study also identified a pronounced "weekend effect." In Israel, traffic volumes and some industrial activity decline significantly on Fridays and Saturdays. During these periods, concentrations of both NOx and PM2.5 dropped, and corresponding changes were observed in the atmospheric electric field. “The weekend signal demonstrates just how sensitive the electric field is to changes in human activity,” the researchers noted. “When emissions decline, the electrical environment adjusts at once, providing a high-resolution indicator of urban atmospheric conditions.” The findings showed that pollution levels can influence not only the chemical composition of the atmosphere but also its electrical properties. Researchers said the results strengthened the case for using atmospheric electricity as an additional tool for environmental monitoring, particularly in densely populated urban areas where anthropogenic, or human-caused, influences are most pronounced. The study also pointed to potential public health applications. By combining air-quality measurements with observations of atmospheric electricity, researchers said they could gain a more complete picture of how urban atmospheric conditions change over time. “Integrating air-quality data with electric-field measurements gives us a clearer picture of how the lower atmosphere evolves moment by moment,” the researchers added. “It’s a framework that can support both scientific insight and practical environmental decision-making.” Beyond the scientific findings, the project highlighted a collaboration between universities, public institutions and secondary education. Researchers said the work demonstrated how students could take part in real-world environmental research while contributing to studies of air quality, atmospheric processes and their potential effects on society. Source: Hebrew University, ScienceDirect This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing
    • Microsoft confirms Windows 11 26H2, urges IT admins to prepare for release

      By +TRS-80 · Posted

      We aren't even at the all-star game and Microsoft is talking about an update that will most likely be released during the World Series if not after. A lot can happen in the world between now and the 2026 World Series, including the 2026 FIFA Cup. Tell me about it again after the FIFA Cup is concluded. That should allow plenty of time to prepare for it.
    • Microsoft: Windows 11 could finally solve a major issue across AMD, Nvidia, and Intel GPUs

      By Jdoe25 · Posted

      Great, tell me when I have a "Bad Pool Caller" elsewhere not in Windoze.
    • Windows 11 gets new audio improvements in the latest builds

      By +TRS-80 · Posted

      The first improvement they need to make to audio in W11 is to add an equalizer that actually works.

  • Recent Achievements

    • Week One Done
      AMV earned a badge
      Week One Done
    • One Month Later
      AMV earned a badge
      One Month Later
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done

  • Popular Contributors

    1. 1
      +primortal
      542
    2. 2
      +Edouard
      186
    3. 3
      Michael Scrip
      77
    4. 4
      PsYcHoKiLLa
      77
    5. 5
      Steven P.
      71
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!