Recommended Posts

Hello Guys,

First of all sorry about my English (not my mother tongue).

I have a laptop (Lenovo ThinkPad Edge) that cause me a problems in the past 24hr.

He is shutdown himself after 10-15 min, with or without (at all!) programs running in the background.

I've notice that the fans is working always, from the stratup to the. The "wind" that coming out from there is not warm like he was

in running of big applications such as HD movies, Games.

Big THANKS in advance! :)

Link to comment
https://www.neowin.net/forum/topic/1154484-my-laptop-shutdown-himself/
Share on other sites

Try to start it in bios and leave it there, does it get warm and shutdown then to ? Then try to boot it into a linux memory stick, does it get warm and **** down then to.

if the if both are no, there's something wrong with your windows, possibly malware. if the answer to both are yes, you have a hardware issue.

lol, It's a he? Why not a she?! xD but yeah.

A lot of languages assigns words sex, he, she, it. in english everything is generally it.

Looks like overheating. Use a program like SpeedFan or OpenHardwareMonitor to check the internal temperatures, especially the CPU. Overheating could be caused by dust accumulation as others have pointed out.

even when overheating, it should be generating enough heat to feel like he's gaming as soon as he turns it on. which indicates a bigger problem than dust, but the CPU being over stressed from the get go.

remove bezel, remove keyboard, remove everything else using an ifixit teardown guide until you get to the heatsink assembly. using a q-tip remove all the dust thats blocking the airflow channels.

Saying no warm air is coming out is saying no warm air can get out. You do not feel any air correct? or you only feel cold air? Laptops are thermostatically controlled, if the CPU is not warm the fan will not work. When CPU hits temperature set in bios, it will enable fan until it hits lowest range of temperature, and will shut off fan to save power until CPU gets hot again.

You may also be able to get to fan/heatsink assembly an easier way - but usually its tedious. don't break any ribbon cables or their delicate connectors. use a small jewelers #0 straight screwdriver to flip them up gently. Take many photos if the guide isn't good so you can reassemble.

Aside from that it would have to be bad temperature sensor or malicious bug/virus. Leaving it in bios screen on the temperature page should reveal what its doing without needing software or worrying about a windows-based reboot. If temperatures are not rising, maybe do 'restore bios defaults'.

would write down all your current settings, restore defaults/clear CMOS, then re-enter them. I have seen corrupt CMOS settings do weird things.

Feel free to question if something is unclear to you and I will try my best to explain it. Good luck!

Now i restored the default BIOS settings, after that i restored my windows to the last restore point.. The message that i got in the beginning from the tray icon area is:

"PCI Standard Host CPU Bridge Drive is updated".. something like this, and i remember that the fan problems started after i got this message this morning.

Have you resolved your issue? Further I suggest making sure device manager has correct hardware ID on everything (no triangles or unknown devices)

After that, go to computer makers site or Motherboard manufacturer and download chipset drivers. Generally if they updated it was done wrong and you need specific ones reinstalled/restored.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Those extra reboots are related to the UEFI Secure Boot certificate update thing.
    • Hands on with the ProtoArc EM25: Affordable ergonomic mouse that focuses on the right things by Taras Buria ProtoArc is known for making all sorts of office products with a big focus on ergonomics and comfort. Its latest product, the EM25, promises a comfortable-to-use, affordable, and customizable mouse. We took one for a spin; here are our impressions. The ProtoArc EM25 is a $49.99 mouse, but right now, during Prime Day 2026, you can get it for just $37.99. Right off the bat, you can see that the EM25 is inspired by Logitech's MX Master lineup and the legendary MX Master 3/3S. Its shape and proportions are very similar, so for a person with large hands (right-handed person, mind you), the EM25 is very comfortable to use. The mouse fills the palm, and the thumb rests on a small extension, giving your wrist a small tilt to reduce strain. The mouse is made of black plastic without any coating, eliminating long-term wear concerns. However, I can see the main buttons and other areas you touch the most getting polished over time. Despite its size and bulk, the mouse is not too heavy. It weighs about 100 grams, which is significantly less than the MX Master 3S and its successor. It is no lightweight gaming mouse by any means, but it is not excessively heavy like the MX Master 4. The EM25 has a built-in storage for its USB dongle. It is a cleverly made magnetic flap that you open by simply pressing on it. Next to the flap, you will find the on/off switch, the 1,000 Hz sensor, and a DPI button (up to 8,000 DPI). I find the DPI button location a bit odd, and I would prefer it somewhere below the main scroll wheel. Still, given that I never change DPI on my mice, I will let it pass. What is more important is that, unlike MX Master 3/3S/4, the device switch button is located below the left-click button, which allows you to switch devices without lifting and flipping the mouse. For a multi-device setup, this is a perfect solution: the button does not require too much effort to use, it does not get in your way, but it is also easily reachable with your thumb. The main scroll wheel has two modes: ratcheted and free-flow. You can only change between them with a bright orange button (I like this little touch of color), which is sprung and requires some effort to press. The wheel is dead-silent in free-flow mode, but ratched is quite loud and stiff, perhaps even too much to my liking. I can hardly call it deal-breaking, but it will certainly take some time to get used to. The side scroll wheel, it is notched, silent, and pleasant to use. Next to it, you can find a piece of glossed plastic with connection indicators: Dongle, Bluetooth 1, Bluetooth 2, and the low battery indicator. By the way, the built-in battery is rechargeable via a USB Type-C cable, which is included. It is sleeved and has an orange velcro strap to keep it tidy. After using the EM25 for a few weeks, I can say that its main buttons are my absolute favorite. They have very pronounced clicks, which feel great with just the right amount of force required to register a press. I would say they feel like something in between regular mouse clicks and silent ones. You can hear and feel the springy switch, but it is not sharp or loud to the point of annoying you. As for back/forward and device switch buttons, they are very clicky and quite noisy. Unfortunately, there are no extra buttons that you can map to specific things like in the MX Master lineup. Besides great primary clicks, another thing I like about the EM25 is its 1,000 Hz sensor. In the world, where Logitech still uses 125 Hz sensors in $100+ mice, seeing a much faster sensor in a mouse that costs three times less is very refreshing. Also, all the settings and customization you make are stored on-device, and you do not need to install any software. Just open the web-based app and change all that you need. Speaking of customization, you can remap what buttons do, adjust the DPI, and the sensor speed. Sadly, gestures are not supported, but you can still map pretty much anything to each button, including shortcuts, media buttons, and more. I also recommend using software like XMouseControl, as it will let you remap the side scroll wheel. At the end of the day, the ProtoArc EM25 is a great mouse. Clearly inspired by the MX Master lineup, it takes the best of it and complements it with a much more wallet-friendly price tag, significantly better sensor, on-device memory, a built-in storage for the dongle, and more (it fixes everything that I complained about the MX Master 4 recently). And for only $37.99 during Prime Day, the EM25 is an easy recommendation. Buy ProtoArc EM25 mouse - $37.99 | 24% off with Prime As an Amazon Associate, we earn from qualifying purchases.
    • Pretty nice tool, thanks
    • Indeed. But note that this has Wifi7, HDMI 2.1, BlueTooth 5.4, and 5G Ethernet, so even in the additional features list this bundle blows the Steam Machine away. And, with the money saved, one could improve this dramatically.
  • Recent Achievements

    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      460
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      107
    4. 4
      Michael Scrip
      83
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!