[HOW TO] Get back your Windows XP Bootloader


Recommended Posts

If for some reason you find the need to get back to your Windows XP bootloader instead of the one installed by your Linux distro, simply follow these instructions:

1. Boot up with your Windows XP disc.

2. Select the option Recovery Console.

3. At the prompt, type "fdisk /mbr" (without the quotes of course)

4. Restart your computer.

Edited with correct info from the following posts...

For me and some others you might need to type "fdisk /mbr" instead of "fixmbr"

just thought I'd add that before people start saying it doesn't work

585566261[/snapback]

Hahaha, you beat me to it!

Yeah, Fixmbr and Fixboot both don't work. I know, I've tried several times. All they do is jack up the NTLoader.

Edited by Jstphish
is there a way to recover the winlogin.exe

585566297[/snapback]

Of course there is :) Boot into the recovery console and use this command.

expand d:\i386\winlogon.ex_ c:\windows\system32\winlogon.exe

D: = drive Xp cd is in

C: = drive Xp is installed on

Edited by Mr. Dick C. Normous
Jeez, leave it to me to have a typo in my very first HOW TO.  Mark, fix that would ya?

585566188[/snapback]

Not a problem. Done.

You should always be able to go back and edit your first post. All members are able to do this. At least that is how I understand it to work. :unsure:

And, by the way, thanks for the quick write-up! This gets asked an awful lot.

  • 3 weeks later...
Hahaha, you beat me to it!

Yeah, Fixmbr and Fixboot both don't work.  I know, I've tried several times.  All they do is jack up the NTLoader.

585566400[/snapback]

Agreed with that.

It always mess with the NTLoader.....arghhhhhh...gotta hate windows.

  • 5 weeks later...
fdisk /mbr does not work for me. I've even ran a search on my XP box for 'fdisk'...and it's not on here.

Is there a way that actually works? shall I try the 'fixmbr' command and see if that works - because I really don't wanna' mess up my system.

585823046[/snapback]

I have always used fdisk /mbr, but I pretty much stopped using Windows right about the start of the XP days, so I can't say for sure which command is supported in XP. Both are equivalent commands, so they are both safe (and set the MBR back to the MS default)

I have always used fdisk /mbr, but I pretty much stopped using Windows right about the start of the XP days, so I can't say for sure which command is supported in XP.  Both are equivalent commands, so they are both safe (and set the MBR back to the MS default)

585830160[/snapback]

If you have MS Windows 95/98/ME installed, click on Start >> Run. Type in "command", without the quotes, and press Enter. At the command prompt, type in the command "fdisk /mbr" to reinstall the Windows bootloader into the MBR.

If you have MS Windows 2000/XP installed, you will need to have the Windows Installation CD. Insert the Installation CD into your CD-ROM drive and reboot your computer. When Windows Setup loads up, follow the onscreen instructions to open the Recovery Console. At the Recovery Console command prompt, type in the command "fixmbr" to reinstall the Windows bootloader into the MBR.

Slight difference in the OS's.

Ok folks.

Fixmbr and fixboot are not working for me. It says it has revised the boot sector etc, but when I restart the computer it still says the hard drive is not bootable. Tried from the Windows XP CD. The options are limited - it won't let you run anything but what is listed under help (so, no fdisk, sys, etc).

I'm getting very frustrated. I tried reinstalling XP, but it simply copies files over to the HD, resets the computer and then tries to boot from the hard drive (which it cannot do).

I'm lost for a solution.

Ok folks.

Fixmbr and fixboot are not working for me.  It says it has revised the boot sector etc, but when I restart the computer it still says the hard drive is not bootable.  Tried from the Windows XP CD.  The options are limited - it won't let you run anything but what is listed under help (so, no fdisk, sys, etc).

I'm getting very frustrated.  I tried reinstalling XP, but it simply copies files over to the HD, resets the computer and then tries to boot from the hard drive (which it cannot do).

I'm lost for a solution.

585845486[/snapback]

I am not sure why your XP is refusing to boot. Really, all that needs to be done is get Windows to restore the MBR and you are done.

What I would recommend at thsi point (you did try a Win98 boot disk from http://www.bootdisk.com/ right?) is that you back up whatever data you can - use a Knoppix LiveCD if you must to get access to your data. Then fdisk and remove all partitions and reinstall XP completely from scratch. You may have some bad data in your partition table that prevents it from accessing the correct Microsoft data outside the MBR.

  • 3 months later...

The easiest way to fix this problem (I know, ive had to do it quite a few times) is to go on and start the installion, and format the drive. THEN go into the recovery console and in this order type fixmbr then fixboot and reinstall windows. I have not yet figured out how to keep windows on a seperate partition and have it still boot

I am not sure why your XP is refusing to boot.  Really, all that needs to be done is get Windows to restore the MBR and you are done.

What I would recommend at thsi point (you did try a Win98 boot disk from http://www.bootdisk.com/ right?) is that you back up whatever data you can - use a Knoppix LiveCD if you must to get access to your data.  Then fdisk and remove all partitions and reinstall XP completely from scratch.  You may have some bad data in your partition table that prevents it from accessing the correct Microsoft data outside the MBR.

585847112[/snapback]

dont need to start fdisk. just use the windows xp or 2000 cd and format there then reboot.

about people not getting this to work. not taking you all for stupid or anything like that, i would say check if the error says ntloader missing, if so you have to copy it from the xp cd. that is a whole other operation i dont have at hand rigth now. *there work houres are done, driving home*

If for some reason you find the need to get back to your Windows XP bootloader instead of the one installed by your Linux distro, simply follow these instructions:

1.  Boot up with your Windows XP disc.

2.  Select the option Recovery Console.

3.  At the prompt, type "fixmbr" (without the quotes of course)

4.  Restart your computer.

585565400[/snapback]

Better hope u only have on partition, or you will trash them all (well, they will exist, but u won't be able to boot them)!!! You should warn people ahead of tyme....

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • The memory and nvme can be swapped and upgraded with standard parts. But the GPU cannot, which is the weakest part of the box. It's a dead product at these prices.
    • Sounds like the debloated build you are running is missing some components that the Photos app and Snipping Tool rely on.
    • Apparently, Microsoft doesn't use water in their taps, washrooms or clean their facility. /sarc
    • Wow, throwback.  VERY VERY briefly - but realised that it wasn't the language I needed for the tasks I was taking on.
    • Apple and Tesla trade secrets reportedly exposed following a Tata Electronics cyberattack by Hamid Ganji Image via Depositphotos.com Tata Electronics has confirmed that it detected a cybersecurity incident in some of its systems. The Indian company is a manufacturing partner of both Apple and Tesla, and the incident may have exposed some trade secrets belonging to the two American companies. The World Leaks ransomware group is said to be behind the attack, and it has reportedly posted up to 200,000 files on the dark web, including component designs and specification documents related to Apple and Tesla products. Tata Electronics told Reuters that its response protocols were deployed immediately and that the “incident has had no impact on our operations across businesses, which remain unaffected.” The ransomware group reportedly sent a ransom demand to Tata Electronics, while Apple has launched an investigation into the incident. World Leaks claims it stole more than 200,000 files totaling over 630GB from Tata Electronics. Some database files on the ransomware group’s website are titled "com.apple.factorydata," which could refer to Apple’s iPhone production operations in India. Moreover, some documents reportedly contain material specifications and quality inspection standards for iPhone circuit board components. However, Apple is not the only affected company. A folder found in the World Leaks database is titled "NV36 Chargeport Controller - North America," which may refer to Tesla Model Y components. Additionally, other files in the database reportedly contain drawings related to Tesla’s Project Highland, the internal codename for the EV maker’s updated Model 3 sedan. To support the authenticity of the stolen files, World Leaks has published documents containing footers that read: "This document contains proprietary and confidential information of Apple Inc." and "information contained herein is deemed confidential, proprietary, and a trade secret of Tesla Inc." Cybersecurity researcher Rajshekhar Rajaharia told Reuters that the database also contains emails, event logs spanning several years, and passport copies of employees, including foreign nationals. Both Tesla and Apple have declined to comment on the scale of the incident.
  • Recent Achievements

    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
    • Dedicated
      tuben earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      487
    2. 2
      +Edouard
      201
    3. 3
      PsYcHoKiLLa
      96
    4. 4
      Michael Scrip
      91
    5. 5
      neufuse
      71
  • Tell a friend

    Love Neowin? Tell a friend!