• 0

Error disabling Connection


Question

I would like to disable my eithernet network connection and I get a error saying error disabling connection - It is not possible to disable the connection at this time. This connection maybe using one or more protocols that do not support Plug and play, or it may have been initiated by another user or the system account., If any help it would be great.

Link to comment
https://www.neowin.net/forum/topic/348866-error-disabling-connection/
Share on other sites

16 answers to this question

Recommended Posts

  • 0
got the same problem any help?

586459729[/snapback]

my problem was because i installed xpize and netcfgx.dll got changed in such a way that it would no longer function. try replacing that file with a known-to-be good file using an app called replacer and see if that helps.

  • 0

THIS HELPED ME!!!!

PRB: Cannot Enable or Disable a Network Device from the Network Connections Folder

SYMPTOMS

If you have a network device driver with an unsigned co-installer and you use the Windows XP operating system, you cannot disable or enable the device from the Network Connections folder (that is, you cannot right-click the device and then click Enable/Disable).

You can, however, enable or disable the device from the Device Manager.

CAUSE

The Device Manager runs in the logged-on user context and is, therefore, allowed to disable or enable devices with unsigned co-installers. However, the request from the Network Connections folder to enable or disable devices is sent to a LocalSystem service, which is not allowed to enable or disable devices because an unsigned co-installer cannot be trusted to run in the logged-on user context.

STATUS

This behavior is by design.

  • 0

I have exactly this same problem,

This happened when I installed Autopatcher XP August 2006.

I get this very error of not being able to disable internet connection from connections menu. I have to do it everytime from the device manager.

So far I have tried replacing netcfgx.dll and it didn't work. And I have also tried the following method too..

corrupted crypo service database...

Click Start, click Run, type cmd in the Open box, and then OK.

At the command prompt, type the following commands, pressing ENTER after each line:

net stop cryptsvc

ren %systemroot%\System32\Catroot2 oldcatroot2

reboot the computer back to normal mode.

None of them worked for me. Please tell me what to do.

Regards,

Furqan

i've had lots of similar problems when i installed xpize :pinch: very poor software

What did you do remove them? Except for ofcourse a new install.

  • 0

Hello everyone, I've been looking into this problem and I think I've come to a solid conclusion. My first hint was numerous posts regarding Cryptographic Services. Anyways it seems that this error is caused by corruption in the db or problems with registered DLL files required by the service. Awhile back I found a little batch script that fixes common Cryptographic Services problems; this script was originally created to correct a Windows Update error (0x800710D9) but seems to also be relevant in this situation that seems to be caused by Autoruns. I suspect by the Speed Tweaks area; but this is just a guess.

This script has been tested on SP1 and SP2 Windows XP Pro systems, should work fine for Home as well.

Hope it helps you all out

Copy between --START-- and --END-- then just paste into a file and name it fixdb.bat

--START--

@echo off

:: Batch file that tries to remedy error # 800710D9

:: "Unable to read from or write to the database".

:: Author: Torgeir Bakken

:: Date: 2004-08-30

cls

echo This batch file will now try to remedy the error 0x800710D9.

echo To abort and not run it now, hold down Ctrl and press C.

echo Otherwise press the space bar to continue.

pause

:: Stop the Cryptographic service

%SystemRoot%\System32\net.exe stop CryptSvc

:: Rename all log files in the %SystemRoot%\Security folder

FOR %%a in (%SystemRoot%\Security\*.log) DO move /y %%a %%a.old

:: Rename the %SystemRoot%\System32\CatRoot2 folder

move /y %SystemRoot%\System32\CatRoot2 %SystemRoot%\System32\CatRoot2old

IF not exist %SystemRoot%\System32\CatRoot2 GOTO CONT01

:: In case the folder rename failed because of locked files

:: rename all log files in the %SystemRoot%\System32\CatRoot2 folder

FOR %%a in (%SystemRoot%\System32\CatRoot2\*.log) DO move /y %%a %%a.old

SET catroot2locked=True

:CONT01

cls

echo.

echo Please wait, this might take some time...

:: Unregister DLL files that are associated with Cryptographic Services

CD /D %SystemRoot%\System32

start /wait regsvr32.exe /s /u softpub.dll

start /wait regsvr32.exe /s /u wintrust.dll

start /wait regsvr32.exe /s /u initpki.dll

start /wait regsvr32.exe /s /u dssenh.dll

start /wait regsvr32.exe /s /u rsaenh.dll

start /wait regsvr32.exe /s /u gpkcsp.dll

start /wait regsvr32.exe /s /u sccbase.dll

start /wait regsvr32.exe /s /u slbcsp.dll

start /wait regsvr32.exe /s /u cryptdlg.dll

:: Reregister DLL files that are associated with Cryptographic Services

start /wait regsvr32.exe /s softpub.dll

start /wait regsvr32.exe /s wintrust.dll

start /wait regsvr32.exe /s initpki.dll

start /wait regsvr32.exe /s dssenh.dll

start /wait regsvr32.exe /s rsaenh.dll

start /wait regsvr32.exe /s gpkcsp.dll

start /wait regsvr32.exe /s sccbase.dll

start /wait regsvr32.exe /s slbcsp.dll

start /wait regsvr32.exe /s cryptdlg.dll

:: Configure and start the Cryptographic service

%SystemRoot%\system32\sc.exe config CryptSvc start= auto

:: Start the Cryptographic Service

%SystemRoot%\system32\net.exe start CryptSvc

cls

echo.

If "%catroot2locked%"=="True" GOTO CONT02

echo Finished, please reboot the computer and then try to install SP2 again...

GOTO END

:CONT02

echo Please run the batch file again with a newly restarted computer...

echo (but if it is newly restarted, just do a reboot and then try

echo to install SP2 again)...

GOTO END

:END

echo.

pause

--END--

  • 0

Hello everyone, I've been looking into this problem and I think I've come to a solid conclusion. My first hint was numerous posts regarding Cryptographic Services. Anyways it seems that this error is caused by corruption in the db or problems with registered DLL files required by the service. Awhile back I found a little batch script that fixes common Cryptographic Services problems; this script was originally created to correct a Windows Update error (0x800710D9) but seems to also be relevant in this situation that seems to be caused by Autoruns. I suspect by the Speed Tweaks area; but this is just a guess.

This script has been tested on SP1 and SP2 Windows XP Pro systems, should work fine for Home as well.

Hope it helps you all out

Copy between --START-- and --END-- then just paste into a file and name it fixdb.bat

--START--

@echo off

:: Batch file that tries to remedy error # 800710D9

:: "Unable to read from or write to the database".

:: Author: Torgeir Bakken

:: Date: 2004-08-30

cls

echo This batch file will now try to remedy the error 0x800710D9.

echo To abort and not run it now, hold down Ctrl and press C.

echo Otherwise press the space bar to continue.

pause

:: Stop the Cryptographic service

%SystemRoot%\System32\net.exe stop CryptSvc

:: Rename all log files in the %SystemRoot%\Security folder

FOR %%a in (%SystemRoot%\Security\*.log) DO move /y %%a %%a.old

:: Rename the %SystemRoot%\System32\CatRoot2 folder

move /y %SystemRoot%\System32\CatRoot2 %SystemRoot%\System32\CatRoot2old

IF not exist %SystemRoot%\System32\CatRoot2 GOTO CONT01

:: In case the folder rename failed because of locked files

:: rename all log files in the %SystemRoot%\System32\CatRoot2 folder

FOR %%a in (%SystemRoot%\System32\CatRoot2\*.log) DO move /y %%a %%a.old

SET catroot2locked=True

:CONT01

cls

echo.

echo Please wait, this might take some time...

:: Unregister DLL files that are associated with Cryptographic Services

CD /D %SystemRoot%\System32

start /wait regsvr32.exe /s /u softpub.dll

start /wait regsvr32.exe /s /u wintrust.dll

start /wait regsvr32.exe /s /u initpki.dll

start /wait regsvr32.exe /s /u dssenh.dll

start /wait regsvr32.exe /s /u rsaenh.dll

start /wait regsvr32.exe /s /u gpkcsp.dll

start /wait regsvr32.exe /s /u sccbase.dll

start /wait regsvr32.exe /s /u slbcsp.dll

start /wait regsvr32.exe /s /u cryptdlg.dll

:: Reregister DLL files that are associated with Cryptographic Services

start /wait regsvr32.exe /s softpub.dll

start /wait regsvr32.exe /s wintrust.dll

start /wait regsvr32.exe /s initpki.dll

start /wait regsvr32.exe /s dssenh.dll

start /wait regsvr32.exe /s rsaenh.dll

start /wait regsvr32.exe /s gpkcsp.dll

start /wait regsvr32.exe /s sccbase.dll

start /wait regsvr32.exe /s slbcsp.dll

start /wait regsvr32.exe /s cryptdlg.dll

:: Configure and start the Cryptographic service

%SystemRoot%\system32\sc.exe config CryptSvc start= auto

:: Start the Cryptographic Service

%SystemRoot%\system32\net.exe start CryptSvc

cls

echo.

If "%catroot2locked%"=="True" GOTO CONT02

echo Finished, please reboot the computer and then try to install SP2 again...

GOTO END

:CONT02

echo Please run the batch file again with a newly restarted computer...

echo (but if it is newly restarted, just do a reboot and then try

echo to install SP2 again)...

GOTO END

:END

echo.

pause

--END--

Thanks.. my problem solved using this method..

so is there anyhting else I need to take care of ?

  • 0

If you... cannot disable or enable the device from the Network Connections folder (that is, you cannot right-click the device and then click Enable/Disable).

You can, however, enable or disable the device from the Device Manager.

That helped me to remove an annoying "Bluetooth-Disconnected" icon from my [32-bit] systray. It was so easy, I'm sure to be the hero on someone else's computer, too. Thanks.

  • 0

New to this forum so Hello everyone. I would like to try the method that tripbert gave to fix the Error Disabling Connection message problem. Unfortunately unlike gr8leo87, I need a little more help. I know how to copy what tripbert posted that is in between Start and Stop, but I don't know how to paste it into a file. I certainly tried, and even renamed one, but I couldn't paste the info in to it and was even sure where the file should go if I could. If any of you could give me a step by step explanation on how to accomplish this I'd appreciate it. Like others here, although this problem isn't a big deal, it still bothers me. I'm not sure exactly when it began, but it worked fine up until an install of AVG Internet Security Suite about two weeks ago, (Uninstalling it didn't make a difference) and updated to the newest FireFox version and McAfee SiteAdvisor. Other than that I'm not sure what caused this Error, and that's what bothers me the most about it I think. LOL. I did uninstall and reinstall the Wireless Network Adapter, as I was also getting a message that it may not be installed correctly. whenever I tried to use the repair feature. Anyway thanks ahead of time, it will certainly be appreciated.

  • 0
Hello everyone, I've been looking into this problem and I think I've come to a solid conclusion. My first hint was numerous posts regarding Cryptographic Services. Anyways it seems that this error is caused by corruption in the db or problems with registered DLL files required by the service. Awhile back I found a little batch script that fixes common Cryptographic Services problems; this script was originally created to correct a Windows Update error (0x800710D9) but seems to also be relevant in this situation that seems to be caused by Autoruns. I suspect by the Speed Tweaks area; but this is just a guess.

This script has been tested on SP1 and SP2 Windows XP Pro systems, should work fine for Home as well.

Hope it helps you all out

Copy between --START-- and --END-- then just paste into a file and name it fixdb.bat

--START--

@echo off

:: Batch file that tries to remedy error # 800710D9

:: "Unable to read from or write to the database".

:: Author: Torgeir Bakken

:: Date: 2004-08-30

cls

echo This batch file will now try to remedy the error 0x800710D9.

echo To abort and not run it now, hold down Ctrl and press C.

echo Otherwise press the space bar to continue.

pause

:: Stop the Cryptographic service

%SystemRoot%\System32\net.exe stop CryptSvc

:: Rename all log files in the %SystemRoot%\Security folder

FOR %%a in (%SystemRoot%\Security\*.log) DO move /y %%a %%a.old

:: Rename the %SystemRoot%\System32\CatRoot2 folder

move /y %SystemRoot%\System32\CatRoot2 %SystemRoot%\System32\CatRoot2old

IF not exist %SystemRoot%\System32\CatRoot2 GOTO CONT01

:: In case the folder rename failed because of locked files

:: rename all log files in the %SystemRoot%\System32\CatRoot2 folder

FOR %%a in (%SystemRoot%\System32\CatRoot2\*.log) DO move /y %%a %%a.old

SET catroot2locked=True

:CONT01

cls

echo.

echo Please wait, this might take some time...

:: Unregister DLL files that are associated with Cryptographic Services

CD /D %SystemRoot%\System32

start /wait regsvr32.exe /s /u softpub.dll

start /wait regsvr32.exe /s /u wintrust.dll

start /wait regsvr32.exe /s /u initpki.dll

start /wait regsvr32.exe /s /u dssenh.dll

start /wait regsvr32.exe /s /u rsaenh.dll

start /wait regsvr32.exe /s /u gpkcsp.dll

start /wait regsvr32.exe /s /u sccbase.dll

start /wait regsvr32.exe /s /u slbcsp.dll

start /wait regsvr32.exe /s /u cryptdlg.dll

:: Reregister DLL files that are associated with Cryptographic Services

start /wait regsvr32.exe /s softpub.dll

start /wait regsvr32.exe /s wintrust.dll

start /wait regsvr32.exe /s initpki.dll

start /wait regsvr32.exe /s dssenh.dll

start /wait regsvr32.exe /s rsaenh.dll

start /wait regsvr32.exe /s gpkcsp.dll

start /wait regsvr32.exe /s sccbase.dll

start /wait regsvr32.exe /s slbcsp.dll

start /wait regsvr32.exe /s cryptdlg.dll

:: Configure and start the Cryptographic service

%SystemRoot%\system32\sc.exe config CryptSvc start= auto

:: Start the Cryptographic Service

%SystemRoot%\system32\net.exe start CryptSvc

cls

echo.

If "%catroot2locked%"=="True" GOTO CONT02

echo Finished, please reboot the computer and then try to install SP2 again...

GOTO END

:CONT02

echo Please run the batch file again with a newly restarted computer...

echo (but if it is newly restarted, just do a reboot and then try

echo to install SP2 again)...

GOTO END

:END

echo.

pause

--END--

1 year later thank you so much for this trick my internet work fine now!

  • 0
1 year later thank you so much for this trick my internet work fine now!

I went into the device manager, right clicked my Ethernet connection and the drop-down menu gave the option to "enable" but "disable" was not present. It was already enabled from the Control Panel so I found this confusing. However, I enabled via the Device Manager, then disabled via the Control Panel, and it worked. I have no idea what all that scripting is or for, but there are some very interesting things that can be done w/ @echo off...

  • 0

hi ...........

wre 2 paste this one and how 2 proceed....

thank u

Copy between --START-- and --END-- then just paste into a file and name it fixdb.bat

--START--

@echo off

:: Batch file that tries to remedy error # 800710D9

:: "Unable to read from or write to the database".

:: Author: Torgeir Bakken

:: Date: 2004-08-30

cls

echo This batch file will now try to remedy the error 0x800710D9.

echo To abort and not run it now, hold down Ctrl and press C.

echo Otherwise press the space bar to continue.

pause

:: Stop the Cryptographic service

%SystemRoot%\System32\net.exe stop CryptSvc

:: Rename all log files in the %SystemRoot%\Security folder

FOR %%a in (%SystemRoot%\Security\*.log) DO move /y %%a %%a.old

:: Rename the %SystemRoot%\System32\CatRoot2 folder

move /y %SystemRoot%\System32\CatRoot2 %SystemRoot%\System32\CatRoot2old

IF not exist %SystemRoot%\System32\CatRoot2 GOTO CONT01

:: In case the folder rename failed because of locked files

:: rename all log files in the %SystemRoot%\System32\CatRoot2 folder

FOR %%a in (%SystemRoot%\System32\CatRoot2\*.log) DO move /y %%a %%a.old

SET catroot2locked=True

:CONT01

cls

echo.

echo Please wait, this might take some time...

:: Unregister DLL files that are associated with Cryptographic Services

CD /D %SystemRoot%\System32

start /wait regsvr32.exe /s /u softpub.dll

start /wait regsvr32.exe /s /u wintrust.dll

start /wait regsvr32.exe /s /u initpki.dll

start /wait regsvr32.exe /s /u dssenh.dll

start /wait regsvr32.exe /s /u rsaenh.dll

start /wait regsvr32.exe /s /u gpkcsp.dll

start /wait regsvr32.exe /s /u sccbase.dll

start /wait regsvr32.exe /s /u slbcsp.dll

start /wait regsvr32.exe /s /u cryptdlg.dll

:: Reregister DLL files that are associated with Cryptographic Services

start /wait regsvr32.exe /s softpub.dll

start /wait regsvr32.exe /s wintrust.dll

start /wait regsvr32.exe /s initpki.dll

start /wait regsvr32.exe /s dssenh.dll

start /wait regsvr32.exe /s rsaenh.dll

start /wait regsvr32.exe /s gpkcsp.dll

start /wait regsvr32.exe /s sccbase.dll

start /wait regsvr32.exe /s slbcsp.dll

start /wait regsvr32.exe /s cryptdlg.dll

:: Configure and start the Cryptographic service

%SystemRoot%\system32\sc.exe config CryptSvc start= auto

:: Start the Cryptographic Service

%SystemRoot%\system32\net.exe start CryptSvc

cls

echo.

If "%catroot2locked%"=="True" GOTO CONT02

echo Finished, please reboot the computer and then try to install SP2 again...

GOTO END

:CONT02

echo Please run the batch file again with a newly restarted computer...

echo (but if it is newly restarted, just do a reboot and then try

echo to install SP2 again)...

GOTO END

:END

echo.

pause

--END--

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Samsung Galaxy Z Fold 8, Flip 8, Z Fold Wide: Everything you need to know The ONLY thing I need to know is the price, which I know will be way higher than I (and most people) are willing to pay for a phone... so basically nothing here I need to know. PS: Nice job getting that Apple reference to a non-existent and unrevealed product as "competition" in there. Cheque is in the mail.
    • Well I really think the repasting helped if your higher clocks have returned, maybe the next thing to look at is if there is a problem with your case airflow? I guess this because your 3080 has returned to optimal state, but is still staying too warm, which might suggest it was thermal throttling before you repasted, of which the only logical conclusion could be outside factors.
    • Samsung Galaxy Z Fold 8, Flip 8, Z Fold Wide: Everything you need to know by Hamid Ganji Galaxy Z Fold 7 - Image via Samsung The next generation of Samsung foldables is set to be unveiled next month at the second Unpacked event of the year. Samsung’s 2026 foldables are not expected to offer significant upgrades over their predecessors, with the Korean firm instead focusing on design refinements and conventional upgrades such as faster processors and better cameras. However, Samsung is reportedly planning to unveil an all-new passport-style foldable this year to rival Apple’s first foldable iPhone, which is expected to debut this September. Here’s a roundup of everything we know about Samsung’s upcoming foldable devices ahead of their official debut. When can we expect Samsung’s new foldables? The Galaxy Z Fold 7 and Z Flip 7 series were unveiled in July, and Samsung is expected to maintain this timeframe in 2026. Based on previous reports from Korean sources, Samsung will hold its Unpacked event on July 22 in London, UK, to pull back the curtain on the Galaxy Z Fold 8 series. The devices are also expected to hit the shelves a few weeks after launch. However, Samsung has yet to announce an official date. A new naming scheme? One of the most interesting changes we might see this year is a new naming scheme for Samsung’s latest foldables. SamMobile reported that since Samsung is expected to unveil three foldables this year, it has adopted a new naming strategy to simplify product identification for customers. Accordingly, the standard Galaxy Z Fold 8 will reportedly be called the Galaxy Z Fold 8 Ultra and will serve as the direct successor to last year’s Galaxy Z Fold 7. The “Ultra” suffix suggests the phone could feature higher-end specifications, such as additional rear camera modules. Samsung’s new passport-style foldable is expected to carry the Galaxy Z Fold 8 name without any suffix. This model is reportedly equipped with two rear cameras. No major changes are expected for the Flip model. Galaxy Z Fold 8 Ultra and Z Flip 8 anticipated specs Rumors over the past few months suggest Samsung is preparing several upgrades for its upcoming foldables, although the devices may continue to rely on larger batteries and faster charging speeds rather than dramatic design changes. The primary focus this year is expected to be the Galaxy Z Fold 8 and its wide-screen design. Galaxy Z Fold 8 Ultra official CAD renders - Image via AndroidHeadlines Here are the anticipated specifications for the Galaxy Z Fold 8 Ultra based on previous leaks: 6.5-inch outer display and 8-inch inner display, 120Hz refresh rate, and 2,600 nits peak brightness Snapdragon 8 Elite Gen 5 processor, paired with 12GB or 16GB of RAM and 256GB, 512GB, or 1TB of storage 4.1mm thickness when unfolded and a weight of 210g 200MP main camera, 50MP ultrawide camera, 10MP or 12MP telephoto camera, 10MP cover camera, and 10MP selfie camera 5,000mAh battery with 45W wired charging Android 17 and One UI 9 As for the Galaxy Z Flip 8, the device is not expected to be a major departure from its predecessor, although it could become slightly slimmer. Expected specifications include: Snapdragon 8 Elite Gen 5 or Exynos 2600 processor 12GB of RAM with 256GB and 512GB storage options 6.9-inch Dynamic AMOLED 2X inner dispaly and 4.1-inch Super AMOLED outer dispaly 50MP main camera, 12MP ultrawide camera, and 10MP selfie camera 4,300mAh battery with 25W wired charging Android 17 and One UI 9 Samsung’s foldables are also expected to launch with Gemini Intelligence, Google’s AI suite for automating tasks in Android ecosystem. Moreover, given current memory and component costs, some Galaxy Z Fold 8 Ultra and Z Flip 8 variants could see a price hike. Galaxy Z Fold 8 adopts a wide-screen design The centerpiece of the upcoming Unpacked event could be the Galaxy Z Fold 8, previously rumored as the Galaxy Z Fold Wide. This model adopts a passport-style form factor and is expected to compete directly with Apple’s iPhone Fold. Galaxy Z Fold 8 official CAD renders - Image via AndroidHeadlines Here’s what to expect: 7.6-inch primary OLED display and 5.4-inch cover display, 120Hz refresh rate, 2,600 nits peak brightness, and 4:3 aspect ratio Snapdragon 8 Elite Gen 5 processor, 12GB or 16GB of RAM, and 256GB, 512GB, or 1TB storage options 4,800mAh battery with 45W wired charging 50MP main camera, 50MP ultrawide camera, and 10MP selfie camera Android 17 and One UI 9 The three new foldable phones are unlikely to be the only devices unveiled at Samsung’s Unpacked event. The company is also expected to introduce the Galaxy Watch Ultra 2 and the Galaxy Watch 9 series.
    • Thanks
  • Recent Achievements

    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      504
    2. 2
      +Edouard
      196
    3. 3
      PsYcHoKiLLa
      140
    4. 4
      ATLien_0
      88
    5. 5
      Steven P.
      81
  • Tell a friend

    Love Neowin? Tell a friend!