• 0

Error disabling Connection


Question

I would like to disable my eithernet network connection and I get a error saying error disabling connection - It is not possible to disable the connection at this time. This connection maybe using one or more protocols that do not support Plug and play, or it may have been initiated by another user or the system account., If any help it would be great.

Link to comment
https://www.neowin.net/forum/topic/348866-error-disabling-connection/
Share on other sites

16 answers to this question

Recommended Posts

  • 0
got the same problem any help?

586459729[/snapback]

my problem was because i installed xpize and netcfgx.dll got changed in such a way that it would no longer function. try replacing that file with a known-to-be good file using an app called replacer and see if that helps.

  • 0

THIS HELPED ME!!!!

PRB: Cannot Enable or Disable a Network Device from the Network Connections Folder

SYMPTOMS

If you have a network device driver with an unsigned co-installer and you use the Windows XP operating system, you cannot disable or enable the device from the Network Connections folder (that is, you cannot right-click the device and then click Enable/Disable).

You can, however, enable or disable the device from the Device Manager.

CAUSE

The Device Manager runs in the logged-on user context and is, therefore, allowed to disable or enable devices with unsigned co-installers. However, the request from the Network Connections folder to enable or disable devices is sent to a LocalSystem service, which is not allowed to enable or disable devices because an unsigned co-installer cannot be trusted to run in the logged-on user context.

STATUS

This behavior is by design.

  • 0

I have exactly this same problem,

This happened when I installed Autopatcher XP August 2006.

I get this very error of not being able to disable internet connection from connections menu. I have to do it everytime from the device manager.

So far I have tried replacing netcfgx.dll and it didn't work. And I have also tried the following method too..

corrupted crypo service database...

Click Start, click Run, type cmd in the Open box, and then OK.

At the command prompt, type the following commands, pressing ENTER after each line:

net stop cryptsvc

ren %systemroot%\System32\Catroot2 oldcatroot2

reboot the computer back to normal mode.

None of them worked for me. Please tell me what to do.

Regards,

Furqan

i've had lots of similar problems when i installed xpize :pinch: very poor software

What did you do remove them? Except for ofcourse a new install.

  • 0

Hello everyone, I've been looking into this problem and I think I've come to a solid conclusion. My first hint was numerous posts regarding Cryptographic Services. Anyways it seems that this error is caused by corruption in the db or problems with registered DLL files required by the service. Awhile back I found a little batch script that fixes common Cryptographic Services problems; this script was originally created to correct a Windows Update error (0x800710D9) but seems to also be relevant in this situation that seems to be caused by Autoruns. I suspect by the Speed Tweaks area; but this is just a guess.

This script has been tested on SP1 and SP2 Windows XP Pro systems, should work fine for Home as well.

Hope it helps you all out

Copy between --START-- and --END-- then just paste into a file and name it fixdb.bat

--START--

@echo off

:: Batch file that tries to remedy error # 800710D9

:: "Unable to read from or write to the database".

:: Author: Torgeir Bakken

:: Date: 2004-08-30

cls

echo This batch file will now try to remedy the error 0x800710D9.

echo To abort and not run it now, hold down Ctrl and press C.

echo Otherwise press the space bar to continue.

pause

:: Stop the Cryptographic service

%SystemRoot%\System32\net.exe stop CryptSvc

:: Rename all log files in the %SystemRoot%\Security folder

FOR %%a in (%SystemRoot%\Security\*.log) DO move /y %%a %%a.old

:: Rename the %SystemRoot%\System32\CatRoot2 folder

move /y %SystemRoot%\System32\CatRoot2 %SystemRoot%\System32\CatRoot2old

IF not exist %SystemRoot%\System32\CatRoot2 GOTO CONT01

:: In case the folder rename failed because of locked files

:: rename all log files in the %SystemRoot%\System32\CatRoot2 folder

FOR %%a in (%SystemRoot%\System32\CatRoot2\*.log) DO move /y %%a %%a.old

SET catroot2locked=True

:CONT01

cls

echo.

echo Please wait, this might take some time...

:: Unregister DLL files that are associated with Cryptographic Services

CD /D %SystemRoot%\System32

start /wait regsvr32.exe /s /u softpub.dll

start /wait regsvr32.exe /s /u wintrust.dll

start /wait regsvr32.exe /s /u initpki.dll

start /wait regsvr32.exe /s /u dssenh.dll

start /wait regsvr32.exe /s /u rsaenh.dll

start /wait regsvr32.exe /s /u gpkcsp.dll

start /wait regsvr32.exe /s /u sccbase.dll

start /wait regsvr32.exe /s /u slbcsp.dll

start /wait regsvr32.exe /s /u cryptdlg.dll

:: Reregister DLL files that are associated with Cryptographic Services

start /wait regsvr32.exe /s softpub.dll

start /wait regsvr32.exe /s wintrust.dll

start /wait regsvr32.exe /s initpki.dll

start /wait regsvr32.exe /s dssenh.dll

start /wait regsvr32.exe /s rsaenh.dll

start /wait regsvr32.exe /s gpkcsp.dll

start /wait regsvr32.exe /s sccbase.dll

start /wait regsvr32.exe /s slbcsp.dll

start /wait regsvr32.exe /s cryptdlg.dll

:: Configure and start the Cryptographic service

%SystemRoot%\system32\sc.exe config CryptSvc start= auto

:: Start the Cryptographic Service

%SystemRoot%\system32\net.exe start CryptSvc

cls

echo.

If "%catroot2locked%"=="True" GOTO CONT02

echo Finished, please reboot the computer and then try to install SP2 again...

GOTO END

:CONT02

echo Please run the batch file again with a newly restarted computer...

echo (but if it is newly restarted, just do a reboot and then try

echo to install SP2 again)...

GOTO END

:END

echo.

pause

--END--

  • 0

Hello everyone, I've been looking into this problem and I think I've come to a solid conclusion. My first hint was numerous posts regarding Cryptographic Services. Anyways it seems that this error is caused by corruption in the db or problems with registered DLL files required by the service. Awhile back I found a little batch script that fixes common Cryptographic Services problems; this script was originally created to correct a Windows Update error (0x800710D9) but seems to also be relevant in this situation that seems to be caused by Autoruns. I suspect by the Speed Tweaks area; but this is just a guess.

This script has been tested on SP1 and SP2 Windows XP Pro systems, should work fine for Home as well.

Hope it helps you all out

Copy between --START-- and --END-- then just paste into a file and name it fixdb.bat

--START--

@echo off

:: Batch file that tries to remedy error # 800710D9

:: "Unable to read from or write to the database".

:: Author: Torgeir Bakken

:: Date: 2004-08-30

cls

echo This batch file will now try to remedy the error 0x800710D9.

echo To abort and not run it now, hold down Ctrl and press C.

echo Otherwise press the space bar to continue.

pause

:: Stop the Cryptographic service

%SystemRoot%\System32\net.exe stop CryptSvc

:: Rename all log files in the %SystemRoot%\Security folder

FOR %%a in (%SystemRoot%\Security\*.log) DO move /y %%a %%a.old

:: Rename the %SystemRoot%\System32\CatRoot2 folder

move /y %SystemRoot%\System32\CatRoot2 %SystemRoot%\System32\CatRoot2old

IF not exist %SystemRoot%\System32\CatRoot2 GOTO CONT01

:: In case the folder rename failed because of locked files

:: rename all log files in the %SystemRoot%\System32\CatRoot2 folder

FOR %%a in (%SystemRoot%\System32\CatRoot2\*.log) DO move /y %%a %%a.old

SET catroot2locked=True

:CONT01

cls

echo.

echo Please wait, this might take some time...

:: Unregister DLL files that are associated with Cryptographic Services

CD /D %SystemRoot%\System32

start /wait regsvr32.exe /s /u softpub.dll

start /wait regsvr32.exe /s /u wintrust.dll

start /wait regsvr32.exe /s /u initpki.dll

start /wait regsvr32.exe /s /u dssenh.dll

start /wait regsvr32.exe /s /u rsaenh.dll

start /wait regsvr32.exe /s /u gpkcsp.dll

start /wait regsvr32.exe /s /u sccbase.dll

start /wait regsvr32.exe /s /u slbcsp.dll

start /wait regsvr32.exe /s /u cryptdlg.dll

:: Reregister DLL files that are associated with Cryptographic Services

start /wait regsvr32.exe /s softpub.dll

start /wait regsvr32.exe /s wintrust.dll

start /wait regsvr32.exe /s initpki.dll

start /wait regsvr32.exe /s dssenh.dll

start /wait regsvr32.exe /s rsaenh.dll

start /wait regsvr32.exe /s gpkcsp.dll

start /wait regsvr32.exe /s sccbase.dll

start /wait regsvr32.exe /s slbcsp.dll

start /wait regsvr32.exe /s cryptdlg.dll

:: Configure and start the Cryptographic service

%SystemRoot%\system32\sc.exe config CryptSvc start= auto

:: Start the Cryptographic Service

%SystemRoot%\system32\net.exe start CryptSvc

cls

echo.

If "%catroot2locked%"=="True" GOTO CONT02

echo Finished, please reboot the computer and then try to install SP2 again...

GOTO END

:CONT02

echo Please run the batch file again with a newly restarted computer...

echo (but if it is newly restarted, just do a reboot and then try

echo to install SP2 again)...

GOTO END

:END

echo.

pause

--END--

Thanks.. my problem solved using this method..

so is there anyhting else I need to take care of ?

  • 0

If you... cannot disable or enable the device from the Network Connections folder (that is, you cannot right-click the device and then click Enable/Disable).

You can, however, enable or disable the device from the Device Manager.

That helped me to remove an annoying "Bluetooth-Disconnected" icon from my [32-bit] systray. It was so easy, I'm sure to be the hero on someone else's computer, too. Thanks.

  • 0

New to this forum so Hello everyone. I would like to try the method that tripbert gave to fix the Error Disabling Connection message problem. Unfortunately unlike gr8leo87, I need a little more help. I know how to copy what tripbert posted that is in between Start and Stop, but I don't know how to paste it into a file. I certainly tried, and even renamed one, but I couldn't paste the info in to it and was even sure where the file should go if I could. If any of you could give me a step by step explanation on how to accomplish this I'd appreciate it. Like others here, although this problem isn't a big deal, it still bothers me. I'm not sure exactly when it began, but it worked fine up until an install of AVG Internet Security Suite about two weeks ago, (Uninstalling it didn't make a difference) and updated to the newest FireFox version and McAfee SiteAdvisor. Other than that I'm not sure what caused this Error, and that's what bothers me the most about it I think. LOL. I did uninstall and reinstall the Wireless Network Adapter, as I was also getting a message that it may not be installed correctly. whenever I tried to use the repair feature. Anyway thanks ahead of time, it will certainly be appreciated.

  • 0
Hello everyone, I've been looking into this problem and I think I've come to a solid conclusion. My first hint was numerous posts regarding Cryptographic Services. Anyways it seems that this error is caused by corruption in the db or problems with registered DLL files required by the service. Awhile back I found a little batch script that fixes common Cryptographic Services problems; this script was originally created to correct a Windows Update error (0x800710D9) but seems to also be relevant in this situation that seems to be caused by Autoruns. I suspect by the Speed Tweaks area; but this is just a guess.

This script has been tested on SP1 and SP2 Windows XP Pro systems, should work fine for Home as well.

Hope it helps you all out

Copy between --START-- and --END-- then just paste into a file and name it fixdb.bat

--START--

@echo off

:: Batch file that tries to remedy error # 800710D9

:: "Unable to read from or write to the database".

:: Author: Torgeir Bakken

:: Date: 2004-08-30

cls

echo This batch file will now try to remedy the error 0x800710D9.

echo To abort and not run it now, hold down Ctrl and press C.

echo Otherwise press the space bar to continue.

pause

:: Stop the Cryptographic service

%SystemRoot%\System32\net.exe stop CryptSvc

:: Rename all log files in the %SystemRoot%\Security folder

FOR %%a in (%SystemRoot%\Security\*.log) DO move /y %%a %%a.old

:: Rename the %SystemRoot%\System32\CatRoot2 folder

move /y %SystemRoot%\System32\CatRoot2 %SystemRoot%\System32\CatRoot2old

IF not exist %SystemRoot%\System32\CatRoot2 GOTO CONT01

:: In case the folder rename failed because of locked files

:: rename all log files in the %SystemRoot%\System32\CatRoot2 folder

FOR %%a in (%SystemRoot%\System32\CatRoot2\*.log) DO move /y %%a %%a.old

SET catroot2locked=True

:CONT01

cls

echo.

echo Please wait, this might take some time...

:: Unregister DLL files that are associated with Cryptographic Services

CD /D %SystemRoot%\System32

start /wait regsvr32.exe /s /u softpub.dll

start /wait regsvr32.exe /s /u wintrust.dll

start /wait regsvr32.exe /s /u initpki.dll

start /wait regsvr32.exe /s /u dssenh.dll

start /wait regsvr32.exe /s /u rsaenh.dll

start /wait regsvr32.exe /s /u gpkcsp.dll

start /wait regsvr32.exe /s /u sccbase.dll

start /wait regsvr32.exe /s /u slbcsp.dll

start /wait regsvr32.exe /s /u cryptdlg.dll

:: Reregister DLL files that are associated with Cryptographic Services

start /wait regsvr32.exe /s softpub.dll

start /wait regsvr32.exe /s wintrust.dll

start /wait regsvr32.exe /s initpki.dll

start /wait regsvr32.exe /s dssenh.dll

start /wait regsvr32.exe /s rsaenh.dll

start /wait regsvr32.exe /s gpkcsp.dll

start /wait regsvr32.exe /s sccbase.dll

start /wait regsvr32.exe /s slbcsp.dll

start /wait regsvr32.exe /s cryptdlg.dll

:: Configure and start the Cryptographic service

%SystemRoot%\system32\sc.exe config CryptSvc start= auto

:: Start the Cryptographic Service

%SystemRoot%\system32\net.exe start CryptSvc

cls

echo.

If "%catroot2locked%"=="True" GOTO CONT02

echo Finished, please reboot the computer and then try to install SP2 again...

GOTO END

:CONT02

echo Please run the batch file again with a newly restarted computer...

echo (but if it is newly restarted, just do a reboot and then try

echo to install SP2 again)...

GOTO END

:END

echo.

pause

--END--

1 year later thank you so much for this trick my internet work fine now!

  • 0
1 year later thank you so much for this trick my internet work fine now!

I went into the device manager, right clicked my Ethernet connection and the drop-down menu gave the option to "enable" but "disable" was not present. It was already enabled from the Control Panel so I found this confusing. However, I enabled via the Device Manager, then disabled via the Control Panel, and it worked. I have no idea what all that scripting is or for, but there are some very interesting things that can be done w/ @echo off...

  • 0

hi ...........

wre 2 paste this one and how 2 proceed....

thank u

Copy between --START-- and --END-- then just paste into a file and name it fixdb.bat

--START--

@echo off

:: Batch file that tries to remedy error # 800710D9

:: "Unable to read from or write to the database".

:: Author: Torgeir Bakken

:: Date: 2004-08-30

cls

echo This batch file will now try to remedy the error 0x800710D9.

echo To abort and not run it now, hold down Ctrl and press C.

echo Otherwise press the space bar to continue.

pause

:: Stop the Cryptographic service

%SystemRoot%\System32\net.exe stop CryptSvc

:: Rename all log files in the %SystemRoot%\Security folder

FOR %%a in (%SystemRoot%\Security\*.log) DO move /y %%a %%a.old

:: Rename the %SystemRoot%\System32\CatRoot2 folder

move /y %SystemRoot%\System32\CatRoot2 %SystemRoot%\System32\CatRoot2old

IF not exist %SystemRoot%\System32\CatRoot2 GOTO CONT01

:: In case the folder rename failed because of locked files

:: rename all log files in the %SystemRoot%\System32\CatRoot2 folder

FOR %%a in (%SystemRoot%\System32\CatRoot2\*.log) DO move /y %%a %%a.old

SET catroot2locked=True

:CONT01

cls

echo.

echo Please wait, this might take some time...

:: Unregister DLL files that are associated with Cryptographic Services

CD /D %SystemRoot%\System32

start /wait regsvr32.exe /s /u softpub.dll

start /wait regsvr32.exe /s /u wintrust.dll

start /wait regsvr32.exe /s /u initpki.dll

start /wait regsvr32.exe /s /u dssenh.dll

start /wait regsvr32.exe /s /u rsaenh.dll

start /wait regsvr32.exe /s /u gpkcsp.dll

start /wait regsvr32.exe /s /u sccbase.dll

start /wait regsvr32.exe /s /u slbcsp.dll

start /wait regsvr32.exe /s /u cryptdlg.dll

:: Reregister DLL files that are associated with Cryptographic Services

start /wait regsvr32.exe /s softpub.dll

start /wait regsvr32.exe /s wintrust.dll

start /wait regsvr32.exe /s initpki.dll

start /wait regsvr32.exe /s dssenh.dll

start /wait regsvr32.exe /s rsaenh.dll

start /wait regsvr32.exe /s gpkcsp.dll

start /wait regsvr32.exe /s sccbase.dll

start /wait regsvr32.exe /s slbcsp.dll

start /wait regsvr32.exe /s cryptdlg.dll

:: Configure and start the Cryptographic service

%SystemRoot%\system32\sc.exe config CryptSvc start= auto

:: Start the Cryptographic Service

%SystemRoot%\system32\net.exe start CryptSvc

cls

echo.

If "%catroot2locked%"=="True" GOTO CONT02

echo Finished, please reboot the computer and then try to install SP2 again...

GOTO END

:CONT02

echo Please run the batch file again with a newly restarted computer...

echo (but if it is newly restarted, just do a reboot and then try

echo to install SP2 again)...

GOTO END

:END

echo.

pause

--END--

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Glad these prices are starting to come down, but that is still crazy. I bought the 2TB 9100 Pro (slightly more expensive version with PCIe 5.0) last year for $240.
    • The 2TB Samsung 990 PRO NVMe SSD hits lowest price in over three months by Sayan Sen Yesterday, we covered a really good deal wherein you can get a 4TB TeamGroup T-FORCE G50 NVMe PCIe Gen4 SSD for a low price of just $400 with a special discount coupon. That's just $100 per TB, making it a very good offer during these hard times. The deal is still live, so you can check it out in its dedicated article here if you do not want to miss out. Meanwhile, if you don't have that kind of budget but still wish to buy an SSD for a good price, the 2TB variant of the TeamGroup SSD at $280 its lowest price in over three months. Meanwhile, those seeking 2TB but faster performance can check out Samsung's 990 PRO, which has hit the lowest price also in the last quarter or so, as it's on sale for $370 (purchase links under the specs table down below). Thus, you want a faster drive, get the 990 Pro, or you want more capacity, grab the TeamGroup 4TB linked in the first para. The 990 PRO is a PCIe Gen4 NVMe SSD and still one of the fastest drives available today for under $500. Speaking of fast, sequential reads and writes are rated at 7450 MB/s and 6900 MB/s, respectively. The random throughputs for reads and writes are 1400K IOPS and 1550K IOPS, respectively. The 990 PRO is based on Samsung's 7th Gen V-NAND flash, and it too is TLC. It packs 2 gigs of LPDDR4 DRAM cache, which helps the random performance. The endurance rating for this is 1200 TBW (terabytes written), which should be sufficient for most users. The Samsung 990 PRO is compatible with the PlayStation 5, but if you are going to use the 990 PRO on a PC, check out the Samsung Magician app that lets you track your drive's health, update its firmware, customize various settings, and more. The tech specs are given below: Specification TeamGroup T-FORCE G50 2TB Samsung 990 PRO 2TB Interface PCIe 4.0 x4, NVMe 1.4 PCIe Gen 4.0 x4, NVMe 2.0 Form Factor M.2 2280 M.2 2280 Controller InnoGrit Controller Samsung In-house Controller NAND Flash 3D TLC 3D TLC DRAM Cache None (HMB supported) 2GB LPDDR4 Sequential Read (Max) 5,000 MB/s 7,450 MB/s Sequential Write (Max) 4,500 MB/s 6,900 MB/s Random Read (4K) Up to 600,000 IOPS Up to 1,400,000 IOPS Random Write (4K) Up to 700,000 IOPS Up to 1,550,000 IOPS TBW (Endurance) 1,300 TBW 1,200 TBW MTBF 3,000,000 hours 1,500,000 hours Operating Temperature 0°C to 70°C 0°C to 70°C Storage Temperature -40°C to 85°C -40°C to 85°C Shock Resistance 1,500G / 0.5ms 1,500G / 0.5ms Heatsink Patented Graphene Heat Spreader No Get them at the links below: Samsung 990 PRO SSD 2TB (MZ-V9P2T0B/AM): $369.99 (Sold and Shipped by Amazon US) TEAMGROUP T-Force G50 2TB SSD (TM8FFE002T0C129): $279.99 (Sold by TeamGroup, Shipped by Amazon US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • If you can't spell a simple word that 2nd graders learn, your entire argument is suspect.
    • And here goes the "Won't someone think of the children" brigade. Get stuffed mate. This has NOTHING to do with making the internet safe. It's about tracking adults, spying on your online activity, and sending the boys around when they don't like something you post. Also, again, parliament have voted TWICE against this, and Starmer is going ahead anyway. THAT is anti-democratic bullsh**. They will use this law to track you, they will use this law to control you, and they will use this law to punish you if they don't like what you do, even if it's legal. And your data? Say bye bye to that. It'll be on the darkweb in weeks. I'm not some rando online. I've been an IT professional for 40 years, many of it in security. I know exactly what this means and what will happen to your data. I do not consent and I will not comply.
    • "...but it may not be Microsoft's fault" seems like a reasonable way to tease what is going on without leaving the user with a false impression that an update is the problem. A title isn't a summery, it is meant to entice the user to read the article. It should not contain a misleading premise; which this title does not. You could maybe complain that the first paragraph should have included that detail. The writing style popularized over 100 years ago in newspapers will cover the most important information as soon as possible with details and nuance added later; the idea being that with each new paragraph you have less of the reader's focus.
  • Recent Achievements

    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
    • Week One Done
      Prasann earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      520
    2. 2
      +Edouard
      174
    3. 3
      PsYcHoKiLLa
      90
    4. 4
      Steven P.
      81
    5. 5
      ATLien_0
      70
  • Tell a friend

    Love Neowin? Tell a friend!