Enable AHCI on Intel chipsets


Recommended Posts

Some of you might know that AHCI enables Native Command Queuing support and Hot Plugging for SATA drives. Unfortunately it can usually be enabled only when installing Windows, by using a floppy drive.

Spported southbridges: ICH6R, ICH6M, ICH7R, ICH7DH, ICH7M

Instructions:

1) Make sure AHCI is not enabled in your BIOS, otherwise this guide is pointless for you.

2) Back up your Windows folder and prepare a boot disk in case this guide fails!

3) Download 79im05ww.exe from http://www-307.ibm.com/pc/support/site.wss...ocid=MIGR-62909

4) Extract the file to C:\DRIVERS\WIN\SATA.

5) If you have the ICH7M southbridge, go to step 8.

5) Open C:\DRIVERS\WIN\SATA\PREPARE\IMSM_PRE.inf in Notepad.

6) Replace any instance of DEV_27C5 with the following, according to your southbridge:

ICH6R - DEV_2652

ICH6M - DEV_2653

ICH7R - DEV_27C1

ICH7DH - DEV_27C1

ICH7M - DEV_27C5

7) Save the file and close Notepad.

8) Click Start, select Run.

9) In the Open field type C:\DRIVERS\WIN\SATA\PREPARE\INSTALL.CMD and click OK.

10) Restart your computer, and enable AHCI on in your BIOS Setup.

11) Start Windows XP or Windows 2000. The Found New Hardware wizard will start automatically.

12) If running Windows XP:

1. Click No, not this time then click Next.

2. Select Install from a list or specific location (Advanced), then click Next.

3. Select Search for the best driver in these locations.

4. Select Include this location in the search: and specify the path, C:\DRIVERS\WIN\SATA, and click Next.

13) If running Windows 2000:

1. Click Next.

2. Select Search for a suitable driver for my device (recommended), then click Next.

3. Select Specify a location, then click Next.

4. Specify the path, C:\DRIVERS\WIN\SATA, and click OK, then click Next.

14) Click Finish.

15) When the System Settings Change window appears, click Yes. The computer restarts.

Link to comment
https://www.neowin.net/forum/topic/457699-enable-ahci-on-intel-chipsets/
Share on other sites

Confused here. I'm running a single SATA 250GB drive as my primary boot disk. (Well, I've partitioned it into two, but it's one physical drive.) Intel ICH7R southbridge.

No RAID for me, as I've only got one drive, but what advantages will I get if I run my drive in AHCI mode rather than in IDE mode? Can this even be done - this IS the drive I'm booting from...

Confused here. I'm running a single SATA 250GB drive as my primary boot disk. (Well, I've partitioned it into two, but it's one physical drive.) Intel ICH7R southbridge.

No RAID for me, as I've only got one drive, but what advantages will I get if I run my drive in AHCI mode rather than in IDE mode? Can this even be done - this IS the drive I'm booting from...

As I said in the first post:

AHCI enables Native Command Queuing support and Hot Plugging for SATA drives

:no: I am not able to set the BIOS in AHCI mode

I use a Asus P5PL2 mobo with Intel ICH7DH southbridge

I can see in BIOS that the SATA controller use IDE mode for my Seagate Barracuda disk

It is a sata2 disk,and my mobo support sata2 up to 300Mb/s,so I would realy like the sata

controllers to work in AHCI mode.

When I enter BIOS,under IDE configuration,there is a line called:Configur SATA As..,but the only option

is: Standard IDE.As a discription to this option it says:"When in AHCI/RAID mode,controller is forced to

Native mode".

Can anybody please tell me how to configur my SATA drive for best preformence?

Is there a way to configur it to AHCI mode?

I hope somebody has time to help me!

  • 2 months later...
lhost' date='May 3 2006, 09:26' post='587471595']

Some of you might know that AHCI enables Native Command Queuing support and Hot Plugging for SATA drives. Unfortunately it can usually be enabled only when installing Windows, by using a floppy drive.

Can't you enable AHCI by just installing Intel's Matrix Storage Manager/Technology?:

http://www.intel.com/support/chipsets/imsm/

http://www.intel.com/support/chipsets/imst/

  • 1 month later...
  • 1 month later...
  • 2 weeks later...

I literally spent a DAY trying to get AHCI to work. I was trying to load WMCE and after pressing F6, loading the drivers, and watching Windows install....my PC would crash and reboot at the Loading Windows screen (the one you see right after post with the animated bar).

I tried everything I could think of (believe me....that is a lot of stuff....I'm 39 and been building PC's since I was 12)

THIS WORKED LIKE A CHAMP!!!!!!!!!!!!!

THANK YOU, THANK YOU, AND THANKS A HECK OF A LOT!!!!!!

:D :) :laugh: :rofl: :woot: :yes:

One note for anyone attempting this procedure. In step 6 the instructions say REPLACE. Notepad has a REPLACE feature. USE IT! It will keep you from making a typo like another poster did.

  • 4 weeks later...
  • 1 month later...
  • 1 month later...

hi to all! i'm Ruben from italy. I have a p5b deluxe and two 250gb sata2. I would like to know where to connect those hd. I know that there are difference between red and black connector. I would like to know also how to set sata on bios and which driver install. i have read of ahci but i don't understand very well what is it. thank you for your help and sorry for my bad english

  • 1 month later...

Here is the solution (it worked fine for me)

With the BIOS on IDE open Regedit and go to:

HKLM\System\CurrentControlSet\Services\msahci\Start

and change whatever you have on DWORD to '0'

Raboot

Reboot again, enter BIOS

Change IDE to AHCI, Save

Let the OS redetect your drives

Reboot

That's it, hope it helps

  • 3 months later...
  • 2 weeks later...
Any news regarding this guide but with the ICH9 chipset?

I have the P35 chipset w/ ICH9 (Gigabyte P35-DS3R)... with an existing Vista installation I did this:

HKLM\System\CurrentControlSet\Services\msahci\Start

and change whatever you have on DWORD to '0' (default value was 4)

like Ropera mentioned, I installed the Intel Matrix Program/Drivers, rebooted went into Bios... changed from RAID/IDE to AHCI save and everything went fine...

  • 2 months later...

I used that method originally on my Asus P5W DH Deluxe for both Windows XP 32 bits and Vista 32 bits but now I have a double problem:

Now I have a Asus P5K Deluxe with ICH9 and I'm with both Windows XP and Vista x64 edition.

So instead of this drivers version on the firts post (http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-62909), I'll have to get another one right?

I have the P35 chipset w/ ICH9 (Gigabyte P35-DS3R)... with an existing Vista installation I did this:

HKLM\System\CurrentControlSet\Services\msahci\Start

and change whatever you have on DWORD to '0' (default value was 4)

like Ropera mentioned, I installed the Intel Matrix Program/Drivers, rebooted went into Bios... changed from RAID/IDE to AHCI save and everything went fine...

Can you post a print screen of all DWORD keys you have under \Start forlder? Inside mine HKLM\System\CurrentControlSet\Services\ it doesn't even have a \msahci or \msahci\Start forlders, I'm confused :wacko:

Please help me, I'm desperate.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I can't believe Starmer is still there...his party lost so big. He's a stubborn coot, but this is largely unenforceable, so I would imagine he'll be resigning soon. A key here is for parents to buy their kids phones sans Internet access--and set up the Internet at home, where mom and day can, you know, act like parents instead expecting the government to raise their kids.
    • EA launches in-game advertising platform for brands to "connect with audiences" by Pulasthi Ariyasinghe The gaming giant Electronic Arts is exploring more ways to inject real-life brands into its games. Announced today as EA Advertising, the new platform is attempting to make it easier for brands to reach out for deals with the company and put their products inside titles like EA Sports FC, Madden, NHL, Skate, or The Sims. EA revealed that its EA Sports side of the company brings in "hundreds of millions of players across console, PC, and mobile" every year. Fan engagement of these titles was also touted as being "extraordinary," with 23,000 NFL seasons worth of games being played in Madden NFL daily, while EA Sports FC sees over a billion matches a day. “Players come to EA’s games and live experiences every day to play, watch, create and connect,” said David Tinson, Chief Experiences Officer at Electronic Arts. “That gives brands a meaningful opportunity to show up in ways that add value and respect the player experience, while maintaining authenticity in the worlds our teams are building. With EA Advertising, we’re helping brands become part of those moments in ways that are relevant and built for players.” Using the new program EA Advertising, brands will be able to inject their products into games in real-time via dynamic placement. EA says partners will have access to everything from stadium signage in sports games and targeted adverts to in-game content custom-made for the brands. These are described as additions designed to "enhance, not disrupt" experiences. "In these interactive gameplay environments, brands become part of the game itself, reflecting how players engage with advertising in real-world contexts," adds the company "Brands can activate across live environments, tailoring placements to meet campaign objectives, and update campaigns with ongoing optimization informed by aggregated engagement insights." Current real-world brand partnerships EA has built into its games include Visa (EA Sports FC and College Football), Lowe's (EA Sports FC, Madden NFL, and College Football), Red Bull (EA SPORTS FC), Xfinity and Peacock (EA SPORTS FC), and Mountain Dew’s (College Football).
    • Will be surprised if there isn't a new ver of youtube just for labelled educational content
    • UK to ban under-16s from social media following a six-week trial with teenagers by Paul Hill Credit: Pexels A few months ago, Neowin reported that the UK was trialing a social media ban with 300 teenagers for six weeks, that testing has come to an end, and Prime Minister Keir Starmer has announced that the country will ban under-16s from social media. Starmer said that this technology is making children unhappy and making it easier for bullies to harass and abuse them. He continued to talk about the addictive nature of social media, saying that it uses an infinite scroll designed to lock users in for hours. He said this interferes with children doing their homework, reading, playing with friends outside, and going to bed on time. Tackling the idea that nothing can be done about social media, Starmer said: The government’s action won’t stop at social media either, the PM said. It plans to take action on gaming services and livestreaming platforms. Right now, he said, strangers can contact any child unchecked. He said this wouldn’t happen in real life, and the government is going to stop it from happening online, too. The Labour government has overseen the introduction of the Online Safety Act, a big change to the internet which includes age verification on adult websites. This has led to a fair bit of backlash, but overall, the government is pushing ahead with these changes.
    • Still using Hexchat every day but i would not consider it Retro 😛
  • Recent Achievements

    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      511
    2. 2
      +Edouard
      200
    3. 3
      PsYcHoKiLLa
      136
    4. 4
      ATLien_0
      89
    5. 5
      Steven P.
      83
  • Tell a friend

    Love Neowin? Tell a friend!