Howto: Boot existing Ubuntu Partition using Virtualbox inside Windows

By Jexel
in HOW TO & FAQ Guides

 Share

Recommended Posts

Mentor

Jexel

Posted
Posted (edited)

This is a tutorial I wrote up and posted up on my blog.

I recently got Windows 7 and Ubuntu running in a dualboot. However, since I’m using more of Windows now I figured I should probably find a way to run Ubuntu inside my Windows. VM’s are great, but it’d be better if I can actually boot into my existing Ubuntu partition. So I searched the web and kept on finding tutorials on how to boot existing XP partitions inside Windows. So I decided to extrapolate from those tutorials and work my way through it. I’ll be writing how I did it here.

Before we begin, you should have a dual boot setup. I will NOT be showing you how to setup a dual boot, if you need help plenty of other guides out there.

Step 1: Creating a grub boot iso

The grub iso file will allow you to specify which partition to boot into.

1. Boot into Ubuntu

2. We create the folders and copy the necessary files to setup an isoRun the command:

cd; mkdir -p iso/boot/grub; cp /usr/lib/grub/*-pc/stage2_eltorito /boot/grub/menu.lst iso/boot/grub

3. Configure your ~/iso/boot/grub menu.lst file to boot your target OS (in this case Ubuntu). Remove the “savedefault” option from your target entry if it exists.

4. We now create the bootable iso fileRun the command:

cd; mkisofs -R -b boot/grub/stage2_eltorito -no-emul-boot -boot-load-size 4 -boot-info-table -o grub.iso iso

5. Move the iso to a location that’ll be accessable by your Windows partition

Step 2: Creating the .vmdk file

This creates a file which tells Virtualbox what partition to actually load as the harddrive. Unfortunately, unlike VMWare Workstation, Virtualbox does not support a GUI interface for selecting RAW hard disks as the “virtual hard drive”.

1. Boot into Windows

2. cd into the directory you installed virtualbox

3. We find the partition number that needs to be mountedRun the command:

VBoxManage.exe internalcommands listpartitions -rawdisk \\.\PhysicalDrive1

(where 1 is the number of the hard drive ubuntu is installed on. E.g. Master should be 0, you’re second hard-drive should be 1 etc…The output should be something like:

	  Number  Type   StartCHS	   EndCHS	  Size (MiB)  Start (Sect)
	  1	   0×07  0   /32 /33  1023/254/63		902023		 2048
	  5	   0×83  1023/254/63  1023/254/63		 49677   1847346543
	  6	   0×82  1023/254/63  1023/254/63		  2164   1949086188

In this example, my Ubuntu partition is number 5 and the swap is number 6

4. We now create the VMDK file with the given informationRun the command:

VBoxManage.exe internalcommands createrawvmdk -filename C:\path\ubuntu.vmdk -rawdisk \\.\PhysicalDrive1  -partitions 5,6 -register

Step 3: Setup Virtualbox

Now everything should be ready to setup Virtualbox. Create a new virtual machine. Select the .vmdk file we just created as the hard drive and mount the grub.iso file we created at Step 1. If everything was successful Ubuntu should boot up nicely.

Edited by PCBEEF
  • electronicsguy
  • Like 1
  • 1 month later...
Neowinian

Druglord

Posted
Posted (edited)

Wonderful! I created an account on this site just to thank you!

I just have one small problem: Not able to run the guest at more than 800x600 resolution. I'll try my best to find out a way. If there isn't one, I'll just ignore it.

*Edit*

Nevermind, I just needed to install the VirtualBox guest add-ons and it worked!

Edited by Druglord
  • 2 weeks later...
Mentor

Jexel

Posted
  • Author
Posted
Wonderful! I created an account on this site just to thank you!

I just have one small problem: Not able to run the guest at more than 800x600 resolution. I'll try my best to find out a way. If there isn't one, I'll just ignore it.

*Edit*

Nevermind, I just needed to install the VirtualBox guest add-ons and it worked!

I'm glad that my post helped you out :)

  • 2 years later...
Neowinian

mouszeman

Posted
Posted

Hi, first of all great and useful tutorial.

I just started to set up Windows7 and Ubuntu 11.10. I choked at the line


cd; mkdir -p iso/boot/grub; cp /usr/lib/grub/*-pc/stage2_eltorito /boot/grub/menu.lst iso/boot/grub
[/CODE]

You (or anyone) got any idea how this works in a recent version of ubuntu?

I'm completely new to unix so I got no idea. :s

regards, mouszeman

Grand Master

The_Observer

Posted
Posted

can you use this the other way round, i would like to use more ubuntu and less windows, but i want dual boot if needed. would be nice to use the current windows7 i have installed as virtualbox, under ubuntu. BTW if possible if i boot into windows (normal boot) would this do bad things?

  • 4 months later...
Neowinian

lniniaa

Posted
Posted

Brilliant!!! I spent enormous time solving this booting problem. This post helped finally! Many other posts on this issue point to the fake mbr way which I tried but got no luck. I guess the problem is all about helping virtualbox find the right boot record. The boot iso method is not the perfect way to do that since it depends on boot iso image but it's absolutely an ingenious method! Thank you very much!

Neowinian

lniniaa

Posted
Posted
Hi, first of all great and useful tutorial. I just started to set up Windows7 and Ubuntu 11.10. I choked at the line 
 cd; mkdir -p iso/boot/grub; cp /usr/lib/grub/*-pc/stage2_eltorito /boot/grub/menu.lst iso/boot/grub [/CODE]

You (or anyone) got any idea how this works in a recent version of ubuntu? I'm completely new to unix so I got no idea. :s regards, mouszeman

In ubuntu 11.10 I use grub-mkrescue which can make rescue iso image for your system.

  • Make your own iso directory (e.g. /root/iso/boot/grub/) and copy /usr/lib/grub/i386-pc into it.
  • Copy /boot/grub/grub.cfg into /root/iso/boot/grub/
  • Run command: grub-mkrescue -o boot.iso /root/iso/ (I encountered an error about xorriso in the first time and "apt-get install xorriso" made it go away.)

After all those steps, you'll get your iso image. And then follow the other steps metioned by Jexel. Good luck!

  • 3 months later...
Neowinian

mouszeman

Posted
Posted

In ubuntu 11.10 I use grub-mkrescue which can make rescue iso image for your system.

  • Make your own iso directory (e.g. /root/iso/boot/grub/) and copy /usr/lib/grub/i386-pc into it.
  • Copy /boot/grub/grub.cfg into /root/iso/boot/grub/
  • Run command: grub-mkrescue -o boot.iso /root/iso/ (I encountered an error about xorriso in the first time and "apt-get install xorriso" made it go away.)

After all those steps, you'll get your iso image. And then follow the other steps metioned by Jexel. Good luck!

Hi, I didn?t check back for some time, but now I found your reply.

I did create the ISO the way you described, and managed to create the ISO.

After initial problems when I did not start Virtualbox as admin I got to the grub-screen.

Unfortunately, after that I got an error screen:

vbox_error.png

I found these two threads that seem related and also reference this current thread:

https://forums.virtualbox.org/viewtopic.php?f=6&t=38914#p175089

https://forums.virtualbox.org/viewtopic.php?f=6&t=49850

Regards, mouszeman

  • 2 months later...
  • 6 months later...
Neowinian

roofstrider

Posted
Posted

First: Excellent post!

Unfortunately, it didn't work for me: starting the VM gives it a black screen and then nothing happens.

Trying to run dualbooted Xubuntu 12.4.1 from within Windows 7 64bit.

After creating the grub files and ISO in Xubuntu as directed, I used these commands to create the VMDK:

C:\Program Files\Oracle\VirtualBox>VBoxManage.exe internalcommands listpartitions -rawdisk \\.\PhysicalDrive0

Number Type StartCHS EndCHS Size (MiB) Start (Sect)

1 0x07 0 /32 /33 153 /27 /2 1200 2048

2 0x07 153 /27 /3 1023/254/63 384738 2459648

5 0x83 1023/254/63 1023/254/63 72999 790405120

6 0x82 1023/254/63 1023/254/63 1999 939909120

3 0x07 1023/254/63 1023/254/63 16000 944003072

C:\Program Files\Oracle\VirtualBox>VBoxManage.exe internalcommands createrawvmdk -filename C:\ubuntu.vmdk -rawdisk \\.\PhysicalDrive0 -partitions 5,6

That actually created 2 files:

ubuntu.vmdk

ubuntu-pt.vmdk

however, it would only let me mount the first one.

UPDATE:

I had not correctly mounted the .iso file. When that's selected in the VM, it successfully boots from the iso and goes through the GRUB selection screen. However, then it says "file not found." (attached).

Any tips?

post-483760-0-44266700-1362720466.png

This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • The official Funny Pictures thread

      By +Edouard · Posted

    • Creative Sound Blaster AE-X PCIe review: your headphones will love it

      By Jaybonaut · Posted

      Looks like the 7.1 is fake effects, can it at least do real 5.1? It says 'virtual 7.1' in all descriptions.
    • Creative Sound Blaster AE-X PCIe review: your headphones will love it

      By Jaybonaut · Posted

      You can't, if you didn't notice, it doesn't support surround at all, it's right in the spec list.
    • Creative Sound Blaster AE-X PCIe review: your headphones will love it

      By cleverclogs · Posted

      Hi — I’m always interested in soundcards. Like displays, I just want to know I’m getting as much clean “sonic juice” into my brain as possible as the years take their toll. I’m not entirely sure what to take away from this review, though. It doesn’t really tell me whether the AE‑X is a good product or who it’s actually for. Most of what I’m getting is: there’s a driver to install, here’s what it looks like, and here’s what’s in the box. There’s a lot of emphasis on the SPDIF input. When you mention not needing to switch headphones between console and PC — does that mean the PC has to be powered on just to pass audio through? That seems like a fairly big waste of energy. Is this more something a streamer would use alongside a capture card? How are you testing the sound? (Also, you might want to clarify that you’re using the headphones in wired mode when you mention they’re wireless.) You mention the lack of EMI shielding — how much real‑world difference does that make compared with typical motherboard audio? On multi‑channel: what exactly isn’t supported? Does this mean Windows spatial audio (Dolby Atmos for Headphones, DTS Headphone:X, etc.) won’t work, or just that the card itself doesn’t decode surround formats? And are there any true multi‑driver “surround” headphones left that would even use that? You also highlight support for high‑impedance headphones — but what does that translate to in practice? How does it compare to driving the same headphones from a normal device, and does it make any difference for everyday, lower‑impedance models? In short, who is this card actually targeted at?
    • The Microsoft Office feature that time forgot

      By cleverclogs · Posted

      Yes, THIS is wordart, not the styling that can now be done. Wordart was all about those curvy words, that you could change the path of, like making words go around a circle. I don't think it can be done now, right?

  • Recent Achievements

    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
    • First Post
      DrWankel earned a badge
      First Post
    • Reacting Well
      DrWankel earned a badge
      Reacting Well
    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done

  • Popular Contributors

    1. 1
      +primortal
      504
    2. 2
      +Edouard
      170
    3. 3
      PsYcHoKiLLa
      88
    4. 4
      Steven P.
      76
    5. 5
      Michael Scrip
      74
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!