Howto: Boot existing Ubuntu Partition using Virtualbox inside Windows


Recommended Posts

This is a tutorial I wrote up and posted up on my blog.

I recently got Windows 7 and Ubuntu running in a dualboot. However, since I’m using more of Windows now I figured I should probably find a way to run Ubuntu inside my Windows. VM’s are great, but it’d be better if I can actually boot into my existing Ubuntu partition. So I searched the web and kept on finding tutorials on how to boot existing XP partitions inside Windows. So I decided to extrapolate from those tutorials and work my way through it. I’ll be writing how I did it here.

Before we begin, you should have a dual boot setup. I will NOT be showing you how to setup a dual boot, if you need help plenty of other guides out there.

Step 1: Creating a grub boot iso

The grub iso file will allow you to specify which partition to boot into.

1. Boot into Ubuntu

2. We create the folders and copy the necessary files to setup an isoRun the command:

cd; mkdir -p iso/boot/grub; cp /usr/lib/grub/*-pc/stage2_eltorito /boot/grub/menu.lst iso/boot/grub

3. Configure your ~/iso/boot/grub menu.lst file to boot your target OS (in this case Ubuntu). Remove the “savedefault” option from your target entry if it exists.

4. We now create the bootable iso fileRun the command:

cd; mkisofs -R -b boot/grub/stage2_eltorito -no-emul-boot -boot-load-size 4 -boot-info-table -o grub.iso iso

5. Move the iso to a location that’ll be accessable by your Windows partition

Step 2: Creating the .vmdk file

This creates a file which tells Virtualbox what partition to actually load as the harddrive. Unfortunately, unlike VMWare Workstation, Virtualbox does not support a GUI interface for selecting RAW hard disks as the “virtual hard drive”.

1. Boot into Windows

2. cd into the directory you installed virtualbox

3. We find the partition number that needs to be mountedRun the command:

VBoxManage.exe internalcommands listpartitions -rawdisk \\.\PhysicalDrive1

(where 1 is the number of the hard drive ubuntu is installed on. E.g. Master should be 0, you’re second hard-drive should be 1 etc…The output should be something like:

	  Number  Type   StartCHS	   EndCHS	  Size (MiB)  Start (Sect)
	  1	   0×07  0   /32 /33  1023/254/63		902023		 2048
	  5	   0×83  1023/254/63  1023/254/63		 49677   1847346543
	  6	   0×82  1023/254/63  1023/254/63		  2164   1949086188

In this example, my Ubuntu partition is number 5 and the swap is number 6

4. We now create the VMDK file with the given informationRun the command:

VBoxManage.exe internalcommands createrawvmdk -filename C:\path\ubuntu.vmdk -rawdisk \\.\PhysicalDrive1  -partitions 5,6 -register

Step 3: Setup Virtualbox

Now everything should be ready to setup Virtualbox. Create a new virtual machine. Select the .vmdk file we just created as the hard drive and mount the grub.iso file we created at Step 1. If everything was successful Ubuntu should boot up nicely.

Edited by PCBEEF
  • Like 1
  • 1 month later...

Wonderful! I created an account on this site just to thank you!

I just have one small problem: Not able to run the guest at more than 800x600 resolution. I'll try my best to find out a way. If there isn't one, I'll just ignore it.

*Edit*

Nevermind, I just needed to install the VirtualBox guest add-ons and it worked!

Edited by Druglord
  • 2 weeks later...
Wonderful! I created an account on this site just to thank you!

I just have one small problem: Not able to run the guest at more than 800x600 resolution. I'll try my best to find out a way. If there isn't one, I'll just ignore it.

*Edit*

Nevermind, I just needed to install the VirtualBox guest add-ons and it worked!

I'm glad that my post helped you out :)

  • 2 years later...

Hi, first of all great and useful tutorial.

I just started to set up Windows7 and Ubuntu 11.10. I choked at the line


cd; mkdir -p iso/boot/grub; cp /usr/lib/grub/*-pc/stage2_eltorito /boot/grub/menu.lst iso/boot/grub
[/CODE]

You (or anyone) got any idea how this works in a recent version of ubuntu?

I'm completely new to unix so I got no idea. :s

regards, mouszeman

can you use this the other way round, i would like to use more ubuntu and less windows, but i want dual boot if needed. would be nice to use the current windows7 i have installed as virtualbox, under ubuntu. BTW if possible if i boot into windows (normal boot) would this do bad things?

  • 4 months later...

Brilliant!!! I spent enormous time solving this booting problem. This post helped finally! Many other posts on this issue point to the fake mbr way which I tried but got no luck. I guess the problem is all about helping virtualbox find the right boot record. The boot iso method is not the perfect way to do that since it depends on boot iso image but it's absolutely an ingenious method! Thank you very much!

Hi, first of all great and useful tutorial. I just started to set up Windows7 and Ubuntu 11.10. I choked at the line
 cd; mkdir -p iso/boot/grub; cp /usr/lib/grub/*-pc/stage2_eltorito /boot/grub/menu.lst iso/boot/grub [/CODE]

You (or anyone) got any idea how this works in a recent version of ubuntu? I'm completely new to unix so I got no idea. :s regards, mouszeman

In ubuntu 11.10 I use grub-mkrescue which can make rescue iso image for your system.

  • Make your own iso directory (e.g. /root/iso/boot/grub/) and copy /usr/lib/grub/i386-pc into it.
  • Copy /boot/grub/grub.cfg into /root/iso/boot/grub/
  • Run command: grub-mkrescue -o boot.iso /root/iso/ (I encountered an error about xorriso in the first time and "apt-get install xorriso" made it go away.)

After all those steps, you'll get your iso image. And then follow the other steps metioned by Jexel. Good luck!

  • 3 months later...

In ubuntu 11.10 I use grub-mkrescue which can make rescue iso image for your system.

  • Make your own iso directory (e.g. /root/iso/boot/grub/) and copy /usr/lib/grub/i386-pc into it.
  • Copy /boot/grub/grub.cfg into /root/iso/boot/grub/
  • Run command: grub-mkrescue -o boot.iso /root/iso/ (I encountered an error about xorriso in the first time and "apt-get install xorriso" made it go away.)

After all those steps, you'll get your iso image. And then follow the other steps metioned by Jexel. Good luck!

Hi, I didn?t check back for some time, but now I found your reply.

I did create the ISO the way you described, and managed to create the ISO.

After initial problems when I did not start Virtualbox as admin I got to the grub-screen.

Unfortunately, after that I got an error screen:

vbox_error.png

I found these two threads that seem related and also reference this current thread:

https://forums.virtualbox.org/viewtopic.php?f=6&t=38914#p175089

https://forums.virtualbox.org/viewtopic.php?f=6&t=49850

Regards, mouszeman

  • 2 months later...
  • 6 months later...

First: Excellent post!

Unfortunately, it didn't work for me: starting the VM gives it a black screen and then nothing happens.

Trying to run dualbooted Xubuntu 12.4.1 from within Windows 7 64bit.

After creating the grub files and ISO in Xubuntu as directed, I used these commands to create the VMDK:

C:\Program Files\Oracle\VirtualBox>VBoxManage.exe internalcommands listpartitions -rawdisk \\.\PhysicalDrive0

Number Type StartCHS EndCHS Size (MiB) Start (Sect)

1 0x07 0 /32 /33 153 /27 /2 1200 2048

2 0x07 153 /27 /3 1023/254/63 384738 2459648

5 0x83 1023/254/63 1023/254/63 72999 790405120

6 0x82 1023/254/63 1023/254/63 1999 939909120

3 0x07 1023/254/63 1023/254/63 16000 944003072

C:\Program Files\Oracle\VirtualBox>VBoxManage.exe internalcommands createrawvmdk -filename C:\ubuntu.vmdk -rawdisk \\.\PhysicalDrive0 -partitions 5,6

That actually created 2 files:

ubuntu.vmdk

ubuntu-pt.vmdk

however, it would only let me mount the first one.

UPDATE:

I had not correctly mounted the .iso file. When that's selected in the VM, it successfully boots from the iso and goes through the GRUB selection screen. However, then it says "file not found." (attached).

Any tips?

post-483760-0-44266700-1362720466.png

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • The quantum search for Time's origin had an equally mind-boggling conclusion by Sayan Sen Image by Steve Johnson via Pexels A theoretical study from researchers at the University of Surrey suggested that the direction of time may not be fundamentally fixed in certain quantum systems. The work, published in Scientific Reports, examined how the “arrow of time” could emerge from microscopic physics and found that time-reversal symmetry can remain intact even in models used to describe processes such as energy loss and thermalisation. The arrow of time refers to the observed one-way direction from past to future in everyday life. In macroscopic processes, this is easy to see. Spilled milk spreads across a table and does not gather back into a glass, and heat flows from hotter objects to colder ones. These processes shape the common sense idea that time moves in a single direction. However, at the level of fundamental physics, many equations do not prefer a direction of time. Time-reversal symmetry means that the same physical laws can describe a system whether time moves forward or backward. This has made it difficult to explain why irreversible behaviour appears in the large-scale world even when the underlying rules do not require it. Dr Andrea Rocco, Associate Professor in Physics and Mathematical Biology at the University of Surrey, described this contrast: "One way to explain this is when you look at a process like spilt milk spreading across a table, it's clear that time is moving forward. But if you were to play that in reverse, like a movie, you'd immediately know something was wrong – it would be hard to believe milk could just gather back into a glass. However, there are processes, such as the motion of a pendulum, that look just as believable in reverse. The puzzle is that, at the most fundamental level, the laws of physics resemble the pendulum; they do not account for irreversible processes. Our findings suggest that while our common experience tells us that time only moves one way, we are just unaware that the opposite direction would have been equally possible." The study focused on open quantum systems, which are quantum systems that interact with a surrounding environment. This environment, often described as a heat bath, can exchange energy and information with the system. The researchers used this framework to study how a direction of time might appear even when the underlying physics does not enforce one. A key part of the analysis involved the Markov approximation. This is a simplification used in many models where the system is assumed not to retain memory of its past states. The idea is that changes depend only on the current state, not on earlier history. This is commonly used when studying thermalisation, which is the process where a system settles into equilibrium with its environment. The study also used concepts such as master equations, including the Lindblad and Pauli equations, which describe how probabilities of different quantum states change over time. Another related model discussed was quantum Brownian motion, which describes the random-like movement of a quantum particle interacting continuously with its environment. In these descriptions, a “memory kernel” can appear, which is a mathematical term that accounts for how past states influence current behaviour. The researchers found that applying the Markov approximation did not break time-reversal symmetry. Even when the system interacted with an effectively infinite heat bath, the resulting equations of motion remained symmetric in time. This meant that the same mathematical description could, in principle, run forward or backward in time without contradiction. The study further showed that standard frameworks used in open quantum systems, including quantum Brownian motion and master equations like the Lindblad and Pauli forms, could be written in a time-symmetric way. These equations are typically used to describe processes that look irreversible, such as dissipation and thermalisation, but the results suggested they can also be interpreted as allowing evolution in both time directions. Thomas Guff, Research Fellow in Quantum Thermodynamics, said: "The surprising part of this project was that even after making the standard simplifying assumption to our equations describing open quantum systems, the equations still behaved the same way whether the system was moving forwards or backwards in time. When we carefully worked through the maths, we found that this behaviour had to be the case because a key part of the equation, the "memory kernel," is symmetrical in time. We also found a small but important detail which is usually overlooked – a time discontinuous factor emerged that kept the time-symmetry property intact. It’s unusual to see such a mathematical mechanism in a physics equation because it's not continuous, and it was very surprising to see it appear so naturally." The researchers also noted that deriving a one-way arrow of time from time-reversal symmetric microscopic dynamics remains an open problem across fields such as thermodynamics, statistical mechanics, particle physics, and cosmology. Their results suggested that some standard descriptions of irreversible behaviour in open quantum systems may be better understood using a time-symmetric formulation of Markovianity. According to the study, processes such as thermalisation, which are usually treated as irreversible, could in theory be described in a way that allows evolution in either time direction under the same rules. This does not imply that time reversal occurs in everyday life, but rather that the underlying equations do not strictly enforce a single direction. Overall, the findings suggested that the perceived direction of time may emerge from how physical systems are modelled and approximated, rather than from a fundamental asymmetry in the laws themselves. The researchers noted that this perspective could have implications for ongoing work in quantum mechanics, thermodynamics, and cosmology on the origin of time’s arrow. Source: University of Surrey, Nature This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing
    • A bit premature... 100% Marketing. Bizarre.
    • A $300 price hike is insane! No one is going to want to pay that much!
    • Since the 1st one flopped, there is really no reason to make another one. It's just losing money left and right.
  • Recent Achievements

    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
    • One Month Later
      eurospharma62 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      581
    2. 2
      +Edouard
      182
    3. 3
      PsYcHoKiLLa
      75
    4. 4
      Michael Scrip
      73
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!