HTC Desire HD


Recommended Posts

HTC's new line of phones, the Desire Z and HD where announced with a reasonable deal of fanfare, and anyone familiar with any of their other Sense UI phones had a reasonable idea what to expect. I come from an original Desire to the Desire HD, and as such am reasonable familiar myself with what the phone offers.

In terms of packaging, HTC are all about being minimalistic. Included in the box is the phone, the charger, and the headset, and a couple of minimalistic handbooks to get you going.

Hardware

The HTC Desire HD offers a pretty impressive hardware platform, which promised to be a reasonable upgrade from a Nexus 1 or HTC Desire

  • 4.3 Inch Capacitive LCD Touchscreen (480x800 resolution, at 218 pixels per inch)
  • Qualcomm Scorpion (Snapdragon) MSM 8255 @ 1 GHZ
  • Qualcomm Adreno 205 GPU
  • 8 Megapixel camera with dual LED flash, featuring face detection and geotagging capability
  • 1.5 GB onboard memory, plus MicroSD support up to 32GB
  • 768 MB RAM
  • Dual Band HSDPA/HSUPA (14.4 mb/s down 5.76 mb/s up maximum)
  • Wifi B/G/N
  • Bluetooth 2.1
  • 1230 mAh Lithium Ion battery

The phone is a pretty hefty phone, weighing in at 164 grams (5.8 ounces), and at 4.3 inches, it's screen is very large, so if weight is a concern for you, or you simply don't like carrying large objects in your pocket the Desire HD will not be the phone for you. The phone is finished in a high quality aluminium cover, with the same metallic brown colouring used on the original HTC Desire.

The build quality of the phone is excellent, it feels good in the hand, and looks stylish. HTC have opted to place the phone's 3.5mm audio jack at the bottom of the phone, rather than the top, next to the USB/Charger input, which should make it easier to remove the phone from your pocket, which is a sensible design change. At the bottom of the phone, a black plastic panel (click/slide) can be removed to provide access to the sim card slot, and also the MicroSD slot, as HTC have decided to go down a different design route with battery placement, this means that unlike the original HTC Desire, you can swap your MicroSD cards without powering off the phone and removing the battery, which is a very welcome addition.

The battery cover is provided in a second slide off panel on the left hand side of the phone, the battery then just slots into the phone. This is one design change that I am not quite so fond of, the panel can be rather tricky and fiddly to remove and replace, thankfully because of the separate placement of the Micro SD and sim card slots, you shouldn't have to remove this very often. Another side effect of this design change is that it makes it impossible to install a high capacity aftermarket battery, as most high capacity batteries usually require an extra large cover, however replacement batteries can still be installed if they are ordinary sized batteries. The advantage of this design however, is that it makes it far less likely that the battery will come out if you happen to drop the phone.

The power switch and volume rockers are pretty normal fare for smartphones, being placed on the top, and left respectively. However, I find that both the power switch and the volume rocker are not quite prominent enough and sit too flush to the case, which can make activating them a touch fiddly, especially if you have large fingers like mine. All in all though, despite the small niggles, the build quality of the phone is pretty high.

Media

The Desire HD is a DNLA certified handset, and via the phone's built in Connected Media application, you are able to stream video, music, and photos to any DNLA enabled device on your network. The phone will automatically scan your network for any DNLA enabled device, and then offer you the option to stream media to it. I tested this feature using my Windows 7 PC, with Windows Media Player, and it worked just as advertised, a pretty useful feature.

post-286512-0-29636900-1295534081.jpg

The HTC Music application has also received a facelift over previous versions, it now includes a very similar experience to coverflow in landscape mode, and also has direct integration with the Amazon MP3 market, allowing you to search for and purchase music from within the music application. The audio quality of this phone is an improvement over previous HTC phones. The Desire HD also incorporated dolby digital mobile into it's sound experience, allowing you to use a custom equaliser (music only), and also providing the options of Dolby SRS, or WOW surround sound. I was personally not keen on the sound produced with WOW surround sound, however Dolby SRS produces a pretty nice quality boost, and by my reckoning sound quality was reasonably close to what I experienced from my iPod touch, although I must stress I own a pair of Sennheiser CX-300II headphones and do not use the pair provided with the handset. However, to my disappointment the phone does not provide an option to turn these features on system wide, you can only use them from within HTC's own music and gallery options, which means that if you use a different music player or video player, you cannot use these sound enhancement features, which is a little disappointing.

post-286512-0-62492800-1295534111.jpg

The other playback option, the HTC Gallery for Photos and videos has not really changed a great deal from previous Android phones, it provides pretty fluid transition from photo to photo, and the pinch to zoom function is smooth and fluid (although a little too oversensitive if you pinch quickly), however to my slight annoyance I found that HTC seem to have arbitrarily disabled the option to change your photo / video layout to grid view (the default is slideshow view) when you put the phone into landscape mode, which is a slightly odd omission from HTC. Video playback is pretty much the same, however due to the larger screen, and slightly lower pixel density, you will find that lower quality videos, or videos not at the phone's native resolution may look a touch pixelated.

Social networking and Internet

This is one area where HTC Sense phones excel over other smartphones, they offer a very well connected social networking experience, and the Desire HD is no exception. As standard, the Friend Stream widget is included, which pulls updates from your twitter, facebook, and flickr accounts and displays them. However, one area where HTC Sense phones excel greatly over their rivals is in their very tight integration with Facebook, and again the Desire HD is no exception. From within the Sense people application, you can view all of the normal things like phone numbers, email addresses, ETC, however if you link your phone contact to their facebook profile, you can also view their status updates, and photos from within the HTC people application. If your contact is linked to a Facebook profile, the phone will even display their latest status as well as their contact photo when they call you which is a pretty neat, if not somewhat gimmicky feature. If you have your friends linked to Flickr and twitter accounts, you can also view their twitter posts, and Flickr albums from within the people application.

post-286512-0-83314400-1295534118.jpg

The Internet browser included with the Desire HD is reasonably similar to the browser included with the previous generation of HTC Sense phones, save for a slightly modified interface. Due to the fact that the Desire HD has no trackpad, text fields can only be manipulated with your finger, however if you hold your finger over the text, a small zoom box will appear, allowing you to more accurately see where you are moving the cursor, a feature that works pretty well. The web browser is pretty fast, and zooms smoothly and fluidly, and as with all HTC Sense browsers is based on webkit. The fact that this phone is compatible with the slightly faster HSDPA specification should mean ability to achieve better data transfer performance, and with the Vodafone network (which supports this standard) in a random outdoor location with 3 bars of signal, I was able to achieve very respectable speeds of 4.14 mbps down and 3.37 up over a HSDPA signal

post-286512-0-45068500-1295534072.jpg

Customisation

One of the most noticeable changes in the new HTC Sense experience is that it now supports the option for custom skins to be applied, at the moment the only skins available are stock HTC skins (there are a few available, more should be forthcoming over time), which will come as welcome news to people looking for a phone they can customise. HTC have included a new application called HTC Hub which allows the user to download skins, sound themes, ringtones, message alerts, wallpapers, and so on with a couple of clicks, and whilst the range is somewhat limited at this moment in time, you can expect offerings to expand as HTC release more phones with the new experience. Also included are the customary live wallpapers, and normal stock HTC wallpapers. HTC provide access to all of your customisations through a button (next to the phone button), which makes it very easy to apply customisations. Downloading skins, ETC can also be performed through this panel as well as the HTC Hub offering easy customisation.

HTC have gone to great lengths with the new Sense experience to offer a far more customisable experience, in order to allow users to really make devices their own, and what HTC offer in this department absolutely blows the customisability of the iPhone, Blackberry, Windows Phone 7, and most other Android phones out of the water, which is a trend I hope to see continue with other smartphone OSes.

post-286512-0-20112300-1295534127.jpg post-286512-0-41435000-1295534149.jpg post-286512-0-50180500-1295534096.jpg

Applications

As well as the standard Android market, HTC have introduced their own application with the new Sense experience called "HTC Likes", which spotlights the most popular Android Market applications amongst their users, and allows you to download and install them, you can also view comments that other HTC users have made. Apart from the applications I have already mentioned in other parts of this review, HTC still include Peep, their proprietary Twitter app, however the official Twitter application is also bundled with the latest version of Sense, a slightly strange decision from HTC. They have however discontinued use of the default PDF reader, and included the Adobe Viewer application instead. Also included (new to this version of Sense) is a call blocking application which allows you to enter numbers manually, or block from your contacts or call log, and whilst there are applications on the Android market that can do this, the integration is a bit more elegant, blocked calls will be sent to voicemail. An eBook reader is also included, which can read ebooks that are already on the phone, or from a Kobe or Adobe ID. As I do not own any eBooks, I cannot test this application more fully. HTC have also included a widget with their Locations application, allowing you to find local amenities at the touch of a button. Another neat addition is that you can now see a scrollable list at the top of the pull down notifications menu of all of the apps you have launched since booting the phone, for quick and easy access.

The new sense experience also provides some interesting options that you can control from your computer, by creating a htcsense.com account and linking it to your phone, you can set up call and SMS forwarding. You are also able to make the phone ring at it's loudest volume (even if on silent) with the click of a button, which could prove very useful if you put your phone down and forget where it is. You can also lock the phone remotely, and prevent it from being used without a pin code, which is a pretty useful security feature for someone potentially liable to misplace their phone. The option is also provided to remotely erase your phone for added security. I am unable to test if these security measures can be circumvented under normal circumstances, however it is worth nothing that if you root your phone, then a phone lock could probably be alleviated by a wipe from recovery.

post-286512-0-23382200-1295534104.jpg post-286512-0-21436700-1295534134.jpg

Hardware Performance

With the hardware upgrades to the HTC Desire HD, better performance was to be expected. And whilst it's specifications on paper sound pretty similar to the original desire, the CPU used in the Desire HD is an upgraded, and more powerful Snapdragon CPU. Running at standard clock speed, a Linpack score of around 40 megaflops is achievable (for comparison the average on the Desire was about 32 megaflops), this CPU is also manufactured on a 45 nanometer fabrication process, which should also make it more efficient and consume less power than the original Desire's CPU. the Desire HD also features an Adreno 205 GPU. Together, the combination provide a pretty serious performance increase. The Desire HD is able to produce quadrant scores of 1,800-1,900 in comparison the original desire averaged at about 1,200-1,300 with Android 2.2, which in my subjective opinion translated to real life usage, as I found gaming on the phone to feel smoother than it did on the Desire. The GPU is compatible with OpenGL ES 2.0, OpenGL ES 1.1, OpenVG 1.1, EGL 1.3, Direct3D Mobile, SVGT 1.2, Direct Draw, GDI. Concurrent CPU, DSP, graphics, and MDP.

The screen on the Desire HD is the same resolution as the original Desire's screen, it is built from an LCD panel. Compared to the AMOLED screen on the original Desire, the Desire HD's panel is a little less vibrant, however the screen is still of excellent quality, and very responsive to touch inputs. HTC have also decided to do away with physical buttons, and use touch sensitive buttons, and although the fact that there is no raised surface could potentially make these harder to use in poorly lit environments, they are responsive, even to light touches and are reasonably easy to use.

The camera included is an 8MP camera with autofocus, face detection, and an LED flash, which seems to perform pretty well. Like all camera phones, quality is so-so in poor light conditions (I found setting the ISO to 800 alleviates this problem somewhat), the camera is pretty good in good light conditions. And whilst you can never really expect miracles from a phone camera, the camera included with the Desire HD is perfectly good for a few casual family photos. Video quality is about on a par with the original HTC desire, although recording in 720p mode seems to come at a slightly better framerate, probably due to the more powerful CPU. I do not own an iPhone so I cannot make a comparison, however the Desire HD's camera is far superior to the camera on the original HTC desire. If you look at my comparison photos, you will notice that photos from the Desire look pretty dull and washed out, whereas photos from the Desire HD look far more colourful and vibrant. To make this test fair, I took the photos in very close proximity to each other, of the same scene, with the same lighting conditions, and same ISO conditions (an ISO of 100 for both photos, recommended to take photos in perfect sunlight).

Photo taken with original Desire Camera | Photo taken with Desire HD Camera (Warning, these photos are at their original resolutions, and therefore pretty large)

HTC Have taken the option to include a 1230 mAh battery with the Desire HD, which is a rather odd decision considering that the original had a 1400 mAh battery. The fact that the phone does not have an AMOLED screen increases this problem, meaning battery life is not brilliant. You should be able to get about a day out of it with light usage, however heavy GPS, Data, or Gaming usage will drain the battery pretty quickly. The battery life, coupled with the low powered choice of battery is a little disappointing from HTC, although it is not unusual for smartphones to need a daily charge so this is far from a show stopping problem.

1.5 GB of onboard memory is included with the Desire HD, of which about 1.07 GB is usable for applications and application data, which should address a common complaint about HTC phones simply not having enough onboard memory. I have about 70 applications installed, and still have about 740 MB of space remaining, so this should prove more than ample for the vast majority of users, and the option to install to the SD card is still there. This addresses what for me was my biggest niggle with HTC phones, and I am happy that they have finally seen sense on this issue and decided to provide a more reasonable amount of onboard storage on their phones.

Input

The Desire HD uses the now familiar HTC IME, however on the Desire HD it has been tweaked for the lack of optical touchpad, with arrow buttons that allow you to position the cursor by tapping them, a neat little addition for anyone not keen on dragging the cursor around with their finger. As with other HTC phones, the on screen keyboard is pretty accurate, and the large screen makes it considerably easy to type with, especially in landscape mode.

post-286512-0-71029600-1295534914.jpg

Summary

I came to the HTC Desire HD expecting a great experience, already having been familiarised with Sense UI from my use of the original HTC Desire, and overall I have not been disappointed. It has a beautiful large screen, a very powerful hardware platform, and provides the rock solid reliability of Android 2.2 with a highly evolved custom UI that adds a plethora of options for all comers. No other smartphone OS can touch the new Sense experience in terms of the features it offers, or the level of customisation that can be performed. HTC have hit upon a real winner in this department, and they just continue to improve Sense. The phone is fluid, it is powerful, and can handle any task you throw at it with considerable ease.

If the battery life, or small niggles are a concern this will not be the handset for you, I could also imagine the size of the phone making it a little uncomfortable for people with small hands to use. However despite those small issues I find it to be a fantastic handset, and would recommend it to anyone in the lookout for a high quality feature packed smartphone.

Edited by Subject Delta
Link to comment
https://www.neowin.net/forum/topic/969788-htc-desire-hd/
Share on other sites

No problem . Great review!

It's a great phone. But i really don't like 4 (could be more) things:

- The Screen - NOT AMOLED. (Not a big problem, I can live with LCD)

- The Battery - Why not 1500 mAh, HTC ?? Evo 4G has 1500, I want 1500 TOO! Just because the new processor unit is build on 45nm, which run on less power, you shouldn't give us a small battery!

- No front-face camera? Why?

- The speaker. Can't hear my phone ringing in my pocket! (Or it's just me who has this problem?)

Link to comment
https://www.neowin.net/forum/topic/969788-htc-desire-hd/#findComment-593619178
Share on other sites

Rooted, nice! :D Really nice handset but I'm happy with my Desire-Z/Vision/G2

The processes to achieve Root and S-OFF are extremely easy on the Desire/Desire-Z/G2, the easiest root process I have done yet.

No problem . Great review!

It's a great phone. But i really don't like 4 (could be more) things:

- The Screen - NOT AMOLED. (Not a big problem, I can live with LCD)

- The Battery - Why not 1500 mAh, HTC ?? Evo 4G has 1500, I want 1500 TOO! Just because the new processor unit is build on 45nm, which run on less power, you shouldn't give us a small battery!

- No front-face camera? Why?

- The speaker. Can't hear my phone ringing in my pocket! (Or it's just me who has this problem?)

I agree totally about the battery, I am tempted to buy a 1600 mAh replacement from eBay, the battery life is very poor. I personally am not bothered about the front facing camera, as I have no need to make video calls, but I agree that the addition of this feature to Android phones would make them even more compelling. As for the speaker... I don't have any trouble hearing it personally however I do agree that it's a bit on the quiet side.

Link to comment
https://www.neowin.net/forum/topic/969788-htc-desire-hd/#findComment-593619582
Share on other sites

it's an excellent phone in general if can over look the little niggly bits. The new sense is great, much better then classic desire's normal one. Just installed HD rom on my original desire and well... if it can run rooted then it certainly could be released for it by htc officially... sigh.

Btw what are you using for screen shots?

Link to comment
https://www.neowin.net/forum/topic/969788-htc-desire-hd/#findComment-593619620
Share on other sites

Great review, having used a Desire HD rom on my original Desire for a while now I pretty much agree with everything you are saying.

Just one thing i noticed about the comparison of photos taken with the Desire and the Desire HD. The photo you have taken with the original Desire looks unusually bad? I have easily been able to point and click in very bright conditions and get pretty decent photos, example: http://upload.digiex.net/files/md4ni6bsoa855kclmvsg.jpg

I agree the Desire HD's photos are significantly sharper, your comparison just looked like the photos had been taken in totally different conditions.

Anyway this review isn't about that, I found it a great read and would add it to your reputation if Neowin would let me (Y).

Link to comment
https://www.neowin.net/forum/topic/969788-htc-desire-hd/#findComment-593620172
Share on other sites

it's an excellent phone in general if can over look the little niggly bits. The new sense is great, much better then classic desire's normal one. Just installed HD rom on my original desire and well... if it can run rooted then it certainly could be released for it by htc officially... sigh.

Btw what are you using for screen shots?

I believe the main issue is that the ROM is so big, that it wouldn't fit on the Desire's /system partition. Whilst they could release a RUU with an SPL that has an altered partition layout, the user would have very little room left for apps, and as the option is not there in unrooted ROMs to force all apps to install to SD, it's simply not a feasible option for HTC, which is a shame as the new experience is brilliant.

I have a Desire HD and it's rooted with CM7 nightly (oc to 1.2 Ghz) I love it !

I couldn't remove Sense myself, I simply love it, but I am glad you are also enjoying your device :)

Great review, having used a Desire HD rom on my original Desire for a while now I pretty much agree with everything you are saying.

Just one thing i noticed about the comparison of photos taken with the Desire and the Desire HD. The photo you have taken with the original Desire looks unusually bad? I have easily been able to point and click in very bright conditions and get pretty decent photos, example: http://upload.digiex.net/files/md4ni6bsoa855kclmvsg.jpg

I agree the Desire HD's photos are significantly sharper, your comparison just looked like the photos had been taken in totally different conditions.

Anyway this review isn't about that, I found it a great read and would add it to your reputation if Neowin would let me (Y).

I honestly haven't got a clue to be honest. I cleaned the lens, and I made sure the settings where both the same (tweaked the ISO to 100 on both phones, which I saw as a recommendation for outdoor shots, left everything else to default), and I took those 2 snaps within about 30 seconds of each other, so I honestly have no idea what could have caused that. Thanks for the kind words though, much appreciated :)

Nice review mate. My wife has one and she loves it, though she hates the battery life. I need to either buy her a larger battery (haven't look into this yet) or a car charger!

I don't know what's offered on the Australian version of eBay but you can pick up a 1600 mAh battery for it from eBay for about ?6.99 in the UK, even cheaper still if you're prepared to wait for delivery from Hong Kong. Probably worth doing as the battery life is admittedly pretty bad

Link to comment
https://www.neowin.net/forum/topic/969788-htc-desire-hd/#findComment-593620324
Share on other sites

The iPhone isn't the only phone that can play games, the Desire HD is a very powerful gaming phone, and games look fantastic on it's large screen. as for iTunes... meh. Amazon MP3 downloads tend to be higher quality.

yes its true they can play games, but the iTunes store is far better to use then what i have seen on the android? BTW im not one to buy tunes off iTunes, just the games! is there a PC android version of iTunes...

Link to comment
https://www.neowin.net/forum/topic/969788-htc-desire-hd/#findComment-593620702
Share on other sites

yes its true they can play games, but the iTunes store is far better to use then what i have seen on the android? BTW im not one to buy tunes off iTunes, just the games! is there a PC android version of iTunes...

PC version of Market for Android?

Neither. The argument really just depends on the user, I find the Android market suits my needs just fine. Yes, there are some games that aren't available on Android yet, but there are still plenty that are, and as Android gains popularity a lot of apps are being ported over, I think most Android phones will play iTunes music, but personally not only do I find MP3 to be a superior format, I also find the files from Amazon to be of higher quality.

Link to comment
https://www.neowin.net/forum/topic/969788-htc-desire-hd/#findComment-593626128
Share on other sites

I've been looking into getting myself a Desire HD, but from what I've read it's only really available in Europe for the time being. From what I understand, even though it uses some of the same bands, if I imported one to North America, it would still only pick up on the EDGE networks, which... Well, I'm not going to buy this phone so I can access an EDGE network, heh.

I've heard rumours abound though. Apparently Telus is going to be picking this phone up in the near future, which would be awesome. All that said... Does this phone use SIM cards? If it does, then I should be set. All I have to do is wait.

Also, how does this compare to the Desire Z in terms of performance and all that? I'm mostly asking because I've played with the DZ, and I like the physical keyboard and buttons, but I'm used to having a phone without them, so if the only difference is that, then I'd might as well wait for the DHD.

Link to comment
https://www.neowin.net/forum/topic/969788-htc-desire-hd/#findComment-593647464
Share on other sites

From what I can gather it's a bit faster than the DZ, and I believe it has a bigger screen. As for networks, you are right, it can only do WCDMA/HSPA in Europe and Asia

You can use DoubleTwist or AppBrain to access the marketplace on PC.

Yes, but those will only sync with an Android phone, won't allow the market to be used elsewhere

Link to comment
https://www.neowin.net/forum/topic/969788-htc-desire-hd/#findComment-593655854
Share on other sites

  • 2 weeks later...

Good news! The DHD is now available through Telus in Canada. I live in a [fairly] small town, and the store here has a few in, and is getting another shipment tomorrow. I'm not sure if any carriers in the US have picked it up, but for the Canadians... if you want it, it's out here now!

If all goes well, I'll be picking mine up this week, and I'll throw in my two cents on the device as well. :yes:

Link to comment
https://www.neowin.net/forum/topic/969788-htc-desire-hd/#findComment-593697074
Share on other sites

Great review. Made better by the fact you opened the music menu to show The Boy With No Name, I applaud you.

I'm always a bit concerned about battery as often times when I'm out and about, I don't have the option of charging or I need to use it a lot, would a battery change really enhance the battery life to like 2 days of light to moderate usage?

Link to comment
https://www.neowin.net/forum/topic/969788-htc-desire-hd/#findComment-593697106
Share on other sites

I found the battery appalling at first, for example one night I took it off charge at 1.45 and went to sleep, woke up at 9.10 and found it was on 6%!

Since then, I've left stock and put a different ROM on (with Sense), new kernel and a different radio. That improved the battery life to about 30 hours with moderate usage. Not totally satisified, I stopped using the HTC Sense sync as it's still buggy and has never worked properly for me and purchased Green Power. I managed to make 2d 5h to 10% with moderate usage when testing it. I've since allowed syncing more often etc. and with fairly heavy usage (games, internet, calls, sms, e-mail etc.) I still have no trouble making it 24 hours with heavy usage. In fact, since I just switched networks to one with far more data I've been using it more than ever for Internet stuff.

It is quite possible to reign the battery life in massively, but I've found a happy medium now. :woot:

Link to comment
https://www.neowin.net/forum/topic/969788-htc-desire-hd/#findComment-593697222
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • ZimaBoard 2 1664 Starter Kit review: it's a cool and affordable DIY NAS by Steven Parker IceWhale Technology reached out to me asking if I was interested in testing the ZimaBoard 2, and after convincing them to send me the Starter Kit, it arrived at my doorstep in May. A bit of background: it is a Shanghai-based Chinese company founded in 2020, which specializes in single-board servers and personal cloud solutions. From searching around online, user feedback on the company and ZimaOS is mostly positive, so we're off to a good start. In addition, I should probably point out that although they do not have a large portfolio of NAS devices, with just four of what they do offer, they seem to have covered everything from a relatively low-priced entry point with the ZimaBoard 2, right up to the high end, with the ZimaCube 2 Creator Pack that even includes an NVIDIA RTX PRO 2000. Anyway, as already mentioned, what we have today is the ZimaBoard 2 Starter Kit, and here are the full specifications: ZimaBoard 2 Model 832, 1664 CPU Intel Core N150 (4x E Cores/Threads, Max burst up to 3.6 GHz) TDP: 6W (Base) 10W (Max) Graphics Intel UHD Graphics 24 EUs (1.00 GHz) Memory 8 GB, 16 GB DDR5 4800MT/s non ECC SODIMM (soldered) Disk Capacity 60 TB (30 TB x 2) Supported RAID Types TRAID, TRAID +, RAID0, RAID1, RAID5, RAID 6, RAID 10 Storage 2 x SATA 3.0 6Gb/s Ports with Power Bootloader 32 GB, 64 GB eMMC Network 2x RJ-45 2.5 GbE PCIe 1 x PCIe 3.0 (via LPC) USB Ports 2 x USB-A 3.1 (5 Gbps) Display Mini-DisplayPort 1.4 (4K@60Hz) Hardware Transcoding Engine H.264, H.265, MPEG-4, VC-1 Maximum resolution: 4K (4096 x 2160); Maximum FPS: 60 Virtualization Intel® AES New Instructions Intel® Virtualization Technology (VT-x) Intel® Virtualization Technology for Directed I/O (VT-d) Size (H/W/D) 140mm x 83mm x 31mm Weight 0.4 kg (only ZimaBoard 2 device) Power 12v 5A Power Supply Warranty 1 year (Global) 2 Years (EU) OS ZimaOS v1.6.1 MSRP $339, $399 ($548.60) As you can see above, there are two variants of the ZimaBoard 2. The lesser variant has half the eMMC storage and 8 GB less RAM, although it also costs $60 less than the top variant we are testing today. The above pricing is only for the ZimaBoard 2. I put the MSRP of the Starter Kit next to it in brackets, although as of publishing, it is discounted to $534.50. The ZimaBoard 2 started life on Kickstarter and shipped to backers in August last year. It became available via the official website in late 2025 and Q1 2026. This hobbyist NAS contains the still relatively new N150 Intel CPU released in the first quarter of 2025, with support for DisplayPort 1.4, HDMI 2.1, although in this case, the memory is integrated into the board itself, so it will not be possible to upgrade or expand the amount. It also supports AV1 decoding, as well as H.264, VP8, VP9, H.265 (8 bit), and H.265 (10 bit). The different capabilities in the Alder Lake-N (and Twin Lake) series are listed below. Processor E-cores L3-cache Turbo clock GPU GPU-clock TDP Intel N355 8 6 MB 3.9 GHz 32 EUs 1.35 GHz 9 W Intel Core 3 N350 3.9 GHz 1.35 GHz 7 W Intel Core i3-N305 3.8 GHz 1.25 GHz 9 W Intel Core i3-N300 3.8 GHz 1.25 GHz Intel N250 4 3.8 GHz 1.25 GHz 6 W Intel Processor N200 3.7 GHz 0.75 GHz Intel N150 3.6 GHz 24 EUs 1 GHz Intel N97 1.2 GHz 12 W Intel Processor N100 3.4 GHz 0.75 GHz 6 W The CPU is part of the Twin Lake series that sits near the bottom of the N-series, designed for low- powered systems and entry-level laptops, and as such has a base level TDP of just 6W. As I have noted before, we are seeing another NAS with a great amount of RAM. It's important to mention that the ZimaBoard 2's memory is integrated into the base board (which is why they have two variants of it). As a reminder, up until a couple of years ago, it was commonplace to only get 2 or 4GB max on a flagship Synology or QNAP home NAS. Ever since the likes of TerraMaster and more have entered the market with ample RAM sizes included in their NAS offerings, it has gone a long way in forcing the hands of the traditional makers to up their game a bit. First impressions The Starter Kit came in one outer box with several packages inside it (shown above). I forgot to take pics of it because when it arrived, it wasn't clear what was inside, and I had to confirm with my contact that I received the entire Starter Kit. In the box ZimaBoard 2 ZimaBoard 2 HDD Expansion Bracket + PCIe card frame Zimaboard Mini DisplayPort Male to HDMI Female Cable 4K 60Hz Zimaboard PCIe 3.0 x4 to Dual NVMe M.2 SSD Adapter Card Quick guide [full online guide] Limited warranty notice Screws Design Where to start? You'd be forgiven for mistaking it as an SSD enclosure if not for all the ports on it. It is completely made out of metal, and the top is an entire heatsink. It has a premium feel about it, but it definitely looks like a hobby device. As you will see, the completed build looks like it belongs in a server or meter closet rather than as a showpiece on someone's desk. On what I am calling the rear, there's a Mini DisplayPort (1.4), two 2.5 GbE ports, with Type A 3.1 USB ports, and then the barrel connector port. Around the front, there are two SATA6 ports with a power connector in the middle. Left side Right side One side is completely free of ports. On the other there's a slit that allows for the feed of a CPU fan cable, and a PCIe 3.0 X4 slot. Top Bottom The top is entirely made up of a heatsink except for the extended height for the I/O on the rear. Around the other side, you can find the ZIMA branding and some regulatory information stamped near the bottom. As you may see from the bottom of the ZimaBoard 2, it scratches quite easily from just moving it around on my Ikea island. Teardown Before we get started, let's have a look at this thing on the inside. The steps to get to the board are as follows: Remove the four smaller Torx screws on the bottom of the ZimaBoard 2; Remove the four larger Torx screws on the sides of the device; Carefully unstick the CMOS battery from the PCB; Remove two Phillips screws on the PCB; Lift out the PCB. Yes, as you can tell from the instructions, you need three different tools to remove Torx and Phillips screws (10 in total), and unhelpfully, one of the screws is located under the CMOS battery, which is stuck onto the PCB. Building Now comes the fun part. Because the ZimaSpace website does not provide any guidance on how to put the Starter Kit together. They only have guidance for connecting the CPU fan. However, they did upload a video to their YouTube channel that shows the entire process. To install the fan, first remove the four screws on the bottom of the ZimaBoard 2, then on the inside, there is a CPU FAN connector where you can attach the fan, reattach the ZimaBoard 2 frame, and feed the fan cable through the provided slit. Then remove the nearest screw on the side and attach the fan frame to the side of the device using the same screw. ZimaBard 2 screws Aligning the screws Bottom view Remember those four screws we removed to access the CPU FAN? Longer screws are provided in the box with the HDD Expansion Bracket, which is what you will now need to attach the ZimaBoard 2 to it. Helpfully, the orientation on how to attach it is made obvious when the frame can only be screwed on at the same overall length as the ZimaBoard 2. If you do it the wrong way around (which is what I did initially) one side hangs off the frame, and it becomes difficult to attach the PCIe Adapter Card cable. PCIe card frame Other side PCIe slot connector Next, it's time to attach the PCIe card frame, which is fastened with the help of 3.5-inch SATA HDD (3 screws). These are toolless screws that you can just use your fingers to fasten them with. Then it is time to connect the provided PCIe cable with the slot connector on one side of the ZimaBoard 2, feed it through the bottom of the HDD frame, and fasten it with two standoffs. Both bracket options 2280 standoffs with 2x 4TB MP44Q The PCIe 3.0 X4 card comes with a short bracket option, handy if you decide to place it inside a different NAS or rack server, but here we need the long bracket. Oddly enough, the M.2 standoffs were preinstalled into the 22110 position, but extra standoffs are included in the box, which I installed at the 2280 position for our use. I added a couple of MP44Q M.2 PCIe 4.0 SSDs (2 x 4TB) that can be availed on Amazon for $478.99 (the lowest price for 3 months) that TEAMGROUP supplied us with Then we have the almost completed build, you just need to push the card into the PCIe slot. Unfortunately, IceWhale Technologies did not provide a screw for the PCIe card frame (this is also apparent in their own video). Here it is at several different angles, with the last pic showing the SATA Y-Cable connected to the two WD Red Plus 4TB drives. Setup and Usage Next, you connect your cables to the I/O, and the ZimaBoard 2 powers on automatically, as there is no power button on the device. Power is controlled through the Settings in ZimaOS. BIOS The ZimaBoard 2 includes an Aptio BIOS from American Megatrends [1, 2, 3], and you can setup pretty much everything here including the boot order, which is locked to the UEFI OS, however above that choice you can enable or disable booting to a SATA/USB bootloader so this would still allow you to switch to an alternative bootloader and boot from it, or disable it to instead always start from the first disk with an OS installed on it. Initial Setup Upon connecting to the LAN and booting up, the ZimaBoard 2 can be reached by navigating to the IP address (shown if you have a monitor connected), or you can find it using the ZIMA Client desktop application, which is essentially a Zima device finder. Initializing the ZimaBoard 2 The ZimaOS setup process is pretty straightforward, through a wizard, and in full above, it basically consists of setting up an account and some handy tips, and that's that! Post Setup (ZimaOS update) Upon first boot, you are alerted that there is a ZimaOS update from 1.5.0 to 1.6.1, which I applied; the full process is shown above with the changelog. ZimaBoard 2 Storage Setup Next, it is time to set up the storage. ZimaOS actually throws everything onto the eMMC flash drive; it is also the default location of AppData, which is definitely something to be wary about, as the 45GB available storage could fill up quickly. HDDs I first attempted to create a Storage Pool using the two 4TB WD Red Plus NAS drives, and got an error message: After several attempts and then looking online, I discovered it was a bug with ZimaOS where the fix was simply to reboot ZimaOS and then try again, this time I was able to create a RAID mirror using the two drives. SSDs I did the same for the SSDs, as you will see in the above gallery, when I created the second Storage Pool, it only allowed me to select available drives. ZimaBoard 2 AppData ZimaOS comes with an App Store that includes a repository of almost 400 apps, so you will be able to find most of what you'll need for a NAS (although after a quick search, I wasn't able to find a Surveillance Manager), and now comes the important part: moving the default AppData location off the 45GB eMMC and onto a larger volume: Open Settings Then Apps Then, in the Select a new location field, click on the new Storage volume you want to move it to (in my case, the Apps Storage Pool), which is the SSD RAID mirror. Confirm the Migration warning Be praised! You can also do this for Docker (which by default installs onto the 45GB eMMC flash drive) and the User database. Plex Setup Next, I tested the configuration by installing the Plex Server app from the App Store. The library folders must already exist (which I placed into the Storage Pool). Plex Server setup is straightforward and requires very little configuration. In my case, all I had to do was add the media path I just created, which you can also browse to using the folder icon in the path field. In addition, you can now map the new Media library in Windows Explorer using the Zima Client. Oddly enough, it is not possible to access the ZimaBoard 2 over the Network Neighborhood; you must map drives using the client, which is shown in the last image in the above gallery. I watched one of my Blu-Ray rips, which is Dolby Vision with Dolby Atmos, and the content played fine with no stuttering or buffering, which is what anyone needs in this scenario. ZimaBoard 2 Zima Client mobile app There's also a client for mobile. It is pretty barebones, as shown in the above gallery, for example, the Apps screen launches the WebUI for that app, and the Backup must be done manually. On opening Backup, you can select internal storage folders on your phone to backup to the ZimaBoard 2's storage, and although this is constantly scanned, the backup action itself must be manually triggered. There is an option to allow foreground backup (last image in the above gallery), but this basically means the queued backup gets triggered when you manually open the app. Benchmarking SATA PCIe 3.0 X4 A CrystalDiskMark test on a mapped network drive from within a Windows 11 25H2 PC (image above) connected over a 2.5 GbE was well within acceptable ranges. Writes were generally better on the SSD RAID mirror. SATA PCIe 3.0 X1 I also ran the NAS Performance tester, which tests the link speed performance. As you can see, it pretty much maxes out the 2.5GbE connection. Of course, you can also opt to bond the two 2.5 GbE connections for a bit more umph, but I didn't do that. Thermals Top PCIe card SATA HDDs Next, I measured some hotspots while playing content on Plex. It's fair to say this will perform better than a NAS that is enclosed in a metal or plastic case, as almost everything storage-wise is exposed! Anyway, the ZimaBoard 2 did not break a sweat with Plex streaming or disk benchmarks. ZimaOS Factory Reset ZimaOS does not include a factory reset option. Instead, you have to download the ZimaOS image and flash it to the eMMC manually. The flashing process is shown in the above gallery. The steps to do so are listed below: Download the ZimaOS image here; Open BalenaEtcher (Run as Administrator) and select the image; Select your inserted USB drive (min 8 GB) Flash to it; Connect your USB drive, monitor, keyboard, USB hub (optional), mouse (optional), and network cable (recommended) to the ZimaBoard 2; Connect power and press F11 continuously; Select your USB drive starting with UEFI in the boot device menu; Press Enter on the Install ZimaOS option; Select /dev/mmcblk0 (MMC) flash drive as target; Confirm with (three times) to wipe the target disk; Wait a couple of minutes while ZimaOS installs; Remove the USB drive and confirm with a reboot; Your ZimaBoard 2 has been factory reset. However, you don't have to stick with ZimaOS, in fact the company also offers official CasaOS images, that are based on Debian; or as they say themselves, put anything you want on this "hackable single board server" it's up to you. Conclusion I had a lot of fun putting this together. I've custom-built all my own PCs and servers since the 90s, and this is the first time I have had to put a NAS together. Even if the actual base ZimaBoard 2 was already a completed build, it still feels pretty custom. I just wish that IceWhale Technology included a getting-started guide in the box for the Start Kit, which would have really completed this kit. Instead, I had to search for the official video on the YouTube channel to make sure I wasn't doing anything wrong. So who is this for? Definitely the hobbyist who is comfortable building their own PC and servers. It also has a much smaller footprint than its nearest equivalent (in terms of specs), like the Beelink Me Pro, which is another NAS I will be testing soon. Although the Beelink does not come with the PCIe 3.0 X4 expansion, the ZimaBoard 2 Starter Kit suddenly looks to be a great bargain, even if it only offers the two 3.5-inch bays over the four in the other example. It makes a lot of sense to use Intel's N150 chip inside a NAS; it is more than capable of doing what the ZimaBoard 2 is intended for, media streaming and backup. It also looks like the IceWhale Technology staff are quite active in the official forums helping people with issues they come across with ZimaOS and the devices, peer support seems to be good as well, I was quickly able to find why I was not able to create a new Storage Pool in ZimaOS v1.6.1 even though that is quite a serious bug, hopefully it will be fixed in the next update. If you are comfortable with the command line and Docker, you'll be fine. You can do great things with this hardware. This was my first time with ZimaOS. It seems a bit barebones in comparison to the likes of Synology DSM, TOS, and UGOS, but it has a ton of apps to get you started with your home or small business NAS. Where to buy As of publishing, IceWhale Technology is running a discount of up to 5% for the Starter Kit. If you opt to get just the ZimaBoard 2 itself, it does come with a SATA Y-Cable, so you will be able to connect up to two 3.5-inch HDDs to it. ZimaBoard 2 1668 Starter Kit for $534.50 on Amazon US (was $548.60) ZimaBoard 2 832 Starter Kit for $372.88 on Amazon US (was $390.60) Zimaboard 2 1668 (16GB+64GB) for $419.90 on Amazon US Zimaboard 2 832 (8GB+32GB) for $359.90 on Amazon Disclosure: IceWhale Technology provided a free sample without any editorial input or review pre-approval. Good to know The Amazon link is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, when you purchase through links on our site, we earn from qualifying purchases.
    • It's in the Insider's group so yes it's technically beta, though these days it's hard to see much of a difference unless you opt for the most extreme beta builds, which I don't. When I moved here from the Release Preview channel I did so primarily because I wanted to see how well the restored taskbar functionality (restored from Win10, and earlier) is working and whether it was time to finally abandon SAB--and it is--working fine, so far. Not as polished as SAB, but it'll do for me.
    • I've been using MWB Premium for a number of years so that along with Windows updates and updated browser should be fine. Thanks for that.
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      488
    2. 2
      +Edouard
      222
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!