Recommended Posts

Afternoon Neowinians!

I am looking at upgrading my home server with some new bits and bobs - basically new mobo, cpu, and RAM.

I was going to go with an Intel i3 2120T/2120 (because I have a quiet case, and it gets quite hot - so cooler is nice) and an ASRock mobo with your run of the mill RAM. I also only wanted to spend a few hundred, this server is really simple (basically a file server, and a minecraft server).

Thats where the problems started. I was always under the impression ECC RAM was only supported on the higher end hardware...however apparently the AMD FX and AM3+ products support it! While I know intel offers better power/performance/cost ratios, I don't mind sacrificing a little performance and gaining a little heat if ECC is brilliant.

Firstly, is ECC worth it? I mean I rarely see my home computer go for more than a few months without resetting, however our server at work goes for a good year before i reset it out of pitty.

If ECC is worth it, can someone suggest an affordable cpu/mobo/ram combo (i'm in australia, west coast)?

I am planning on running WHS 2011 (as it is cheaper than Win7 Pro! >.<)

Thanks for any help you can give! =)

Regards,

UL

Link to comment
https://www.neowin.net/forum/topic/1100515-to-ecc-or-to-not-ecc-that-is-the/
Share on other sites

Unless you're running mission-critical software, no not really.

RAM errors and malfunctions are pretty rare these days.

ECC actually reduces performance, it increases the CL latency but improves reliability in being able to withstand some memory errors.

Haha thanks guys! That is exactly what I was after! Hard numbers, with a source, is brilliant.

For the sake of a 0.22% chance per YEAR...I don't think ill bother with ECC =P if it was per month...maybe, but not per year!

(I'm impressed you managed to dig up that paper so quickly bio...i was searching for a good few hours =P)

Thanks for the help! =)

Is it worth the price premium, when just "0.22% of DIMMs suffer an ECC-correctable error every year" : source

ECC really is only needed in the most important of applications - is what you need THAT important?

I don't think you read it properly:

About a third of machines and over 8% of DIMMs in

our fleet saw at least one correctable error per year. Our

per-DIMM rates of correctable errors translate to an aver-

age of 25,000?75,000 FIT (failures in time per billion hours

of operation) per Mbit and a median FIT range of 778 ?

25,000 per Mbit (median for DIMMs with errors), while pre-

vious studies report 200-5,000 FIT per Mbit. The number of

correctable errors per DIMM is highly variable, with some

DIMMs experiencing a huge number of errors, compared to

others. The annual incidence of uncorrectable errors was

1.3% per machine and 0.22% per DIMM.

The conclusion we draw is that error correcting codes are

crucial for reducing the large number of memory errors to

a manageable number of uncorrectable errors. In fact, we

found that platforms with more powerful error codes (chip-

kill versus SECDED) were able to reduce uncorrectable er-

ror rates by a factor of 4?10 over the less powerful codes.

Nonetheless, the remaining incidence of 0.22% per DIMM

per year makes a crash-tolerant application layer indispens-

able for large-scale server farms.

My understanding of the 0.22% figure is the amount of errors per DIMM which ECC would be unable to correct.

  • 2 weeks later...
  • 3 months later...

For a real business server? Not using ECC is silly.

For your home server? Using ECC is probably a waste of money.

For an enterprise (read - multiple-XEON/multiple-Opteron rack server), ECC makes sense.

For a server smaller than that (even single-XEON/single-Opteron rack), ECC is pretty darn pointless, because the failure rate (even using standard desktop non-ECC) won't be higher than the worst-case expense in such a scenario, as ECC is priced higher by a factor of greater than three (it's currently closer to five) than desktop RAM of the same speed. (It's still ROI FTW - even when it comes to servers.)

This topic is now closed to further replies.
  • Posts

    • draw.io Desktop 30.2.6 by Razvan Serea draw.io desktop is a downloadable security-first diagramming application that runs on Windows, MacOS and Linux. Creating diagrams in the desktop app doesn’t need an internet connection. This is useful when you are disconnected or when you must create diagrams in a highly secure environment, where data protection is of the utmost importance. When you use the draw.io desktop app, your diagrams will be stored on your local device. Because this is a stand-alone application, also designed to run offline, there are no interfaces to cloud storage platforms available. Of course, you can still store your diagrams in folders that are synchronised to your cloud storage if you wish. Easy-to-use diagram editor The draw.io apps work just like the office and drawing tools you are used to using. Drag and drop shapes from the shape libraries and drag to draw connectors between them. Drag connectors to add waypoints and set a precise shape and position, or let them reroute automatically. Double click and start typing to add a label to anything. Create tables and swimlane flows with a familiar tool. Style shapes and connectors with customisable palettes, sketch options, fonts and text formatting tools. Search for shapes, including in open-source icon libraries. Use our vast libraries of shapes and templates, organised into logical categories, to create a range of diagrams and infographics. Generate diagrams from text descriptions using our smart templates. Diagram faster with keyboard shortcuts. draw.io Desktop 30.2.6 changelog: Uses electron 42.5.0 #2452 Updates to draw.io core 30.2.6. Download: draw.io 64-bit | Standalone (Open Source) Download: draw.io 32-bit | ARM64 | ARM64 Standalone Links: draw.io Home Page | Project page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      497
    2. 2
      +Edouard
      207
    3. 3
      PsYcHoKiLLa
      146
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      69
  • Tell a friend

    Love Neowin? Tell a friend!