Nanoparticle halts MS (in mice), next targets T1 diabetes & asthma


Recommended Posts

Mice are ve avery good human analog, so this looks promising.

Link....

New nanoparticle halts multiple sclerosis, now being tested in Type 1 diabetes and asthma

In a breakthrough for nanotechnology and multiple sclerosis, a biodegradable nanoparticle turns out to be the perfect vehicle to stealthily deliver an antigen that tricks the immune system into stopping its attack on myelin and halt a model of relapsing remitting multiple sclerosis (MS) in mice, according to new Northwestern Medicine research.

The new nanotechnology also can be applied to a variety of immune-mediated diseases including Type 1 diabetes, food allergies and airway allergies such as asthma.

In MS, the immune system attacks the myelin membrane that insulates nerves cells in the brain, spinal cord and optic nerve. When the insulation is destroyed, electrical signals can't be effectively conducted, resulting in symptoms that range from mild limb numbness to paralysis or blindness. About 80 percent of MS patients are diagnosed with the relapsing remitting form of the disease.

The Northwestern nanotechnology does not suppress the entire immune system as do current therapies for MS, which make patients more susceptible to everyday infections and higher rates of cancer. Rather, when the nanoparticles are attached to myelin antigens and injected into the mice, the immune system is reset to normal. The immune system stops recognizing myelin as an alien invader and halts its attack on it.

"This is a highly significant breakthrough in translational immunotherapy," said Stephen Miller, a corresponding author of the study and the Judy Gugenheim Research Professor of Microbiology-Immunology at Northwestern University Feinberg School of Medicine. "The beauty of this new technology is it can be used in many immune-related diseases. We simply change the antigen that's delivered."

"The holy grail is to develop a therapy that is specific to the pathological immune response, in this case the body attacking myelin," Miller added. "Our approach resets the immune system so it no longer attacks myelin but leaves the function of the normal immune system intact."

The nanoparticle, made from an easily produced and already FDA-approved substance, was developed by Lonnie Shea, professor of chemical and biological engineering at Northwestern's McCormick School of Engineering and Applied Science.

"This is a major breakthrough in nanotechnology, showing you can use it to regulate the immune system," said Shea, also a corresponding author. The paper will be published Nov. 18 in the journal Nature Biotechnology.

Miller and Shea are also members of the Robert H. Lurie Comprehensive Cancer Center of Northwestern University. In addition, Shea is a member of the Institute for BioNanotechnology in Medicine and the Chemistry of Life Processes Institute.

CLINICAL TRIAL FOR MS TESTS SAME APPROACH?WITH KEY DIFFERENCE

The study's method is the same approach now being tested in multiple sclerosis patients in a phase I/II clinical trial?with one key difference. The trial uses a patient's own white blood cells?a costly and labor intensive procedure?to deliver the antigen. The purpose of the new study was to see if nanoparticles could be as effective as the white blood cells as delivery vehicles. They were.

THE BIG NANOPARTICLE ADVANTAGE FOR IMMUNOTHERAPY

Nanoparticles have many advantages; they can be readily produced in a laboratory and standardized for manufacturing. They would make the potential therapy cheaper and more accessible to a general population. In addition, these nanoparticles are made of a polymer called Poly(lactide-co-glycolide) (PLG), which consists of lactic acid and glycolic acid, both natural metabolites in the human body. PLG is most commonly used for biodegradable sutures.

The fact that PLG is already FDA approved for other applications should facilitate translating the research to patients, Shea noted. Miller and Shea tested nanoparticles of various sizes and discovered that 500 nanometers was most effective at modulating the immune response.

"We administered these particles to animals who have a disease very similar to relapsing remitting multiple sclerosis and stopped it in its tracks," Miller said. "We prevented any future relapses for up to 100 days, which is the equivalent of several years in the life of an MS patient."

Shea and Miller also are currently testing the nanoparticles to treat Type one diabetes and airway diseases such as asthma.

FOOL IMMUNE SYSTEM

In the study, researchers attached myelin antigens to the nanoparticles and injected them intravenously into the mice. The particles entered the spleen, which filters the blood and helps the body dispose of aging and dying blood cells. There, the particles were engulfed by macrophages, a type of immune cell, which then displayed the antigens on their cell surface. The immune system viewed the nanoparticles as ordinary dying blood cells and nothing to be concerned about. This created immune tolerance to the antigen by directly inhibiting the activity of myelin responsive T cells and by increasing the numbers of regulatory T cells which further calmed the autoimmune response.

"The key here is that this antigen/particle-based approach to induction of tolerance is selective and targeted. Unlike generalized immunosuppression, which is the current therapy used for autoimmune diseases, this new process does not shut down the whole immune system," said Christine Kelley, National Institute of Biomedical Imaging and Bioengineering director of the division of Discovery Science and Technology at the National Institutes of Health, which supported the research. "This collaborative effort between expertise in immunology and bioengineering is a terrific example of the tremendous advances that can be made with scientifically convergent approaches to biomedical problems."

"We are proud to share our expertise in therapeutics development with Dr. Stephen Miller's stellar team of academic scientists," said Scott Johnson, CEO, president and founder of the Myelin Repair Foundation. "The idea to couple antigens to nanoparticles was conceived in discussions between Dr. Miller's laboratory, the Myelin Repair Foundation's drug discovery advisory board and Dr. Michael Pleiss, a member of the Myelin Repair Foundation's internal research team, and we combined our efforts to focus on patient-oriented, clinically relevant research with broad implications for all autoimmune diseases. Our unique research model is designed to foster and extract the innovation from the academic science that we fund and transition these technologies to commercialization. The overarching goal is to ensure this important therapeutic pathway has its best chance to reach patients, with MS and all autoimmune diseases."

More information: Microparticles bearing encephalitogenic peptides induce T-cell tolerance and ameliorate experimental autoimmune encephalomyelitis, Nature Biotechnology (2012) doi:10.1038/nbt.2434,

http://www.nature.com/nbt/journal/vaop/ncurrent/abs/nbt.2434.html

Provided by Northwestern University

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I notice how you dodged the questions I had about the racism shown by ignorant, gullible, cowardly people when the Poles, like your partner, were the immigrants. Ahem. I wonder how you'd feel if native born Brits suddenly treated you as "dirty crooked immigrant" for being half Trump-American? If they ordered you to leave and "go back to your corrupt country" (on the other side of the Atlantic), would you go? The truth is based on facts as supported by evidence. As requested in your previous posts, I have used the facts in your own post to show everyone the truth.
    • US citizens are paying to their government, who could use that to fund healthcare and tuition and relieve the costs of these for citizens instead of making tax breaks that overwhelmingly favor the rich. I'm not saying that tariffs are the correct solution, but what else would they be used for? What else could Trump have in mind for wanting them, if he hasn't figured out that labor costs are higher in the US?
    • I’m in need of a new chair and it sounds like the backrest cannot be locked? I also sat on a Herman miller and was devastated that it couldn’t be locked also, what is going on with chairs. I want to be able to lock the backrest into any position but not even the Herman’s do that
    • Sihoo Doro C300 Pro V2 Ergonomic Office Chair review: The Ikea of chairs by Steven Parker I've reviewed a few gaming chairs over the past three years or so and generally found them to score well in our reviews. SIHOO reached out asking if I was interested in taking a look at their flagship chair, the Doro C300 Pro V2. I never got the chance to check out its predecessor, but the V2 is described as an "Adaptive Ergonomic Chair." It became available to buy in April of this year. Let's get things rolling with a closer look at the specifications and features. Specifications Doro C300 Pro V2 Model Ergonomic Materials Mesh Back and Seat; Soft PU Coated Armrests Height adjustability 45.5 - 53 cm / 17.5" - 20.9" Seat (w+d) 52 x 43 - 47 cm / 20.5" x 16.9" - 18.5" (adjustable) Backrest 52 – 60 cm / 20.5" - 23.6" (adjustable) Lumbar support Mesh built-in (adjustable) Armrest adjustability 8D Bionic Armrests Rocking angle 105°, 120°, 135° (fixed) Neck support Mesh built-in (adjustable) Net weight 27.3 kg / 59.64 lbs Weight support 150 kg / 330 lbs Colors Black, White Warranty 5 years (upon registering) Price $499.99, $539.99 Introduction At first glance, it looks like a chair that in another life wants to be a Herman Miller; It certainly looks like my Aeron Remastered, but the Doro C300 Pro V2 has quite a few more features and costs quite a bit less. SIHOO says that it is made up of a "DynaCore" system that tracks your movement and synchronizes the headrest, backrest, lumbar support, and armrests as you shift, twist, or recline. They also say that the "SyncroFlex Backrest" molds to your spine, which kind of describes how the mesh fabric works in most ergonomic chairs, but anyway. Below are the meat and potatoes measurements for the chair. Here is the same tech sheet, but in inches. Durability I would be remiss to not talk about the various durability testing this chair underwent before coming to market, as this is claimed on the product page. First of all, the chair is BIFMA-, SGS-, and TÜV-certified. As for durability, the tests undergone were: 100,000 Castor cycles tested 120,000 Armrest cycles tested 120,000 Recline cycles tested 120,000 Gas lift cycles tested 60,000 Armrest durability cycles tested 120,000 Rotation cycles tested Nothing about weights testing, though. Now that's all disclosed, now onto my own personal findings. Assembly The Doro C300 Pro V2 came in two large boxes (1) (2), and everything was packed very well, protecting the different parts of the chair. In the box, there is a folded sheet that explains the 12 steps to assemble it; they are: Remove the bottom cover on the aluminum base; Insert the five legs into the aluminum base and use ten screws to fasten them; Insert the castors into the legs; Replace the bottom cover on the bottom of the aluminum base; Place the Class 4 Hydraulics gas cylinder into the aluminum base; Screw the bottom part of the arm rests, taking care of the orientation using two screws on each side; Use three torx screws to fasten the footrest to the bottom of the seat; Fasten the backrest to the seat using four torx bolts; Fasten the armrests to the backrest using four Torx bolts (two on each side), taking care to note the orientation; Place the chair onto the Class 4 Hydraulics gas cylinder; Insert the headrest into the top of the backrest; Use two torx screws to fasten the headrest to the backrest. There's also an online guide you can refer to. Carefully unpacking the two boxes took around 15 minutes because almost everything is wrapped in plastic and protective foam; the chair assembly itself took around an hour. I say in the above assembly steps to take note of the orientation, because it's not obvious which way around the bottom portion of the armrests go, and although there is an L and R on the bottom of the armrests, it also wasn't clear from the instructions which was actually left or right, facing the chair, or in the seated down orientation? Anyway, I ended up putting the bottom portions on the wrong sides, and after securing one of the armrests, I discovered that although it was on the correct side, the armrest base could rotate a full 360°, but not when bolted to the chair, so I had to remove it, rotate it, and then bolt it back on. Truly an Ikea experience! Also, to complicate things further, although all the parts are labeled from A to X (yes, that's 24 parts) unhelpfully, these letters do not appear on the parts themselves or the package with the bolts, screws, and washers. There's also a pair of protective gloves in the box, but I think they were made for much smaller hands than I have. Even my friend, who is 5.1, had difficulty putting them on. Once assembled, I needed to sit down. Anyway, as I said, it looks quite similar to my Herman Miller. And here is the back of it. If you look at the product page and on Amazon, it seems like a lot of thought has gone into the chair itself and what it's capable of, but there is no mention at all about the castors, and this is an area where I think the chair trips up quite quickly. I found it difficult to move the chair in any direction. I asked a friend who came to visit me earlier this week to test my findings, and she said that the wheels were "no good," so it definitely isn't just me. I am 6'2 myself and a big guy, I work from home and gained a few pounds from mostly staying in and the hell away from other people. However, the Doro C300 Pro V2 is rated for up to 150kg (330lbs), which in my case is used well within its max rating. Ergonomics The number of adjustments you can make, right up to setting it in nap mode — which I haven't fully tested yet — is what you'd expect from a premium chair. Yes, you can go up and down (max 7.5 cm adjustment), rock back and forth (with tilt adjustment), and lock the chair between three stages of 105°, 120°, 135°, which is not quite as flat as the AndaSeat I tested at 160°. Some thought has also gone into the "8D" armrests, too, which are cushioned but quite firm; you'll only know it if you press hard into the PU-covered tops, which give about half a centimeter, but it's enough to ensure your skin won't get awkwardly stuck to it in warmer (or sweatier) conditions. It almost feels like plastic and is very easy to keep clean. However, the armrest positions move far too easily, and I am not sure what that "elbow" function is. Maybe it is good for a short person with short arms, anyway, I never used it and kept it flat at all times. There are eight levels of adjustment for the armrests, they are: backwards, forwards, swing left/right, height up and down, tilt, and 360° rotation, which can be handy for desk clearance. As I said, the armrest pads shift far too easily, which could give off an ergonomic vibe, but who wants the armrest sliding when you are shifting weight? The height adjustability does lock into place when lifting and adjusting. Comfort This is ultimately what it boils down to at the end of the day, right? Quite a lot of reviews praise the comfort of this chair, and I don't disagree that the mesh seating is quite comfortable. I am used to the material from my daily Herman Miller. However, the backrest cannot be locked into place, and this is actually a feature; as you shift or recline yourself on the chair, the backrest moves with your body. It took some getting used to. The lumbar gives ample support, but I would have preferred an adjustable one built into the seat base, as this causes the backrest to move up and down at will. Again, as with my previous chair review, this chair is also rated for tall people, but nowhere in the product documentation does it say how tall. Being 6'2 myself, I'm happy to say that the backrest is tall and wide enough, and thought has been given to being able to adjust the neck rest, but as others have mentioned in their reviews, people as tall as 6.2ft is about the limit for the neckrest. Conclusion What I didn't like The footrest is rated for 15kg (33 lbs), which to me seems a bit light, and after looking online, it seems like a chair footrest for adults must be at least twice that rating. In all honesty, they are just hollow metal tubes, so it is not recommended to let a kid sit on them. I also feel like it doesn't really go out far enough for my height, so that kind of puts the dampener on me being able to use it regularly. I'll just have to continue to use my subwoofer as a footrest! I do not like the armrests being able to shift around as easily as they can, and they are a little too forward-positioned in the chair to comfortably sit close to my desk, because even in the lowest height position, they don't allow me to go under the desk like is possible with my Herman Miller. I also feel like this chair could have been delivered partially constructed, especially the armrests on the seat, and why the aluminum base wasn't already pre-constructed (without the castors) is baffling, considering it would have fit in one of the two boxes that way. The instructions also need to be clearer. On the pamphlet, there's an A to X listing (which is also used in the steps), but none of the physical parts use this lettering system! What I did like I'll be honest, I haven't used it for very long, just one week, and seating comfort is subjective after all! Any spills wiped straight off it, the stitching, and the lines look great, not a fray to be seen or stitch out of place. It looks kind of cool, too. My favorite feature of these seats is the nap mode. While you're not lying completely flat, it leans far back enough to make you easily doze off after a heavy gaming or working session. Overall, this chair offers plenty of comfort features. The MSRP does vary quite a bit depending on the region, at £549.99 in the UK, and €580 in Europe, and $599 before tax in the U.S. However, shipping is free, which is a bonus for such a heavy item. Is it worth it, though? At three years' warranty, I think it's a decent deal. Another firm out of Germany sent me a free replacement hydraulic gas spring for a chair that failed after almost four years, so it was well outside its two-year warranty. My advice is to always try, as you might have the same luck I did. If I could fault it at all, it would be the constant shifting of the armrests and backrest. Where to buy Although the footrest variant normally costs $539.99, it has been discounted to $469.99 on the official website in Black or White. In fact, the non-footrest variant is only $40 cheaper. On Amazon, it currently costs more at $499.99 links below. Sihoo Doro C300 Pro V2 for $469.99 (official website) Sihoo Doro C300 Pro V2 for $499.99 at Amazon US SIHOO provided a free sample without any review or pre-approval. Good to know This Amazon link is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • Conversation Starter
      jessse3334 earned a badge
      Conversation Starter
    • Reacting Well
      JuvenileDelinquent earned a badge
      Reacting Well
    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      506
    2. 2
      +Edouard
      207
    3. 3
      PsYcHoKiLLa
      151
    4. 4
      Steven P.
      73
    5. 5
      macoman
      62
  • Tell a friend

    Love Neowin? Tell a friend!