Help, using Mac Bluetooth Keyboard on PC?


Recommended Posts

Maybe you should try to switch stack from Microsoft to Widcomm, or vice versa?

585919603[/snapback]

I started with old Widcomm's, was it 1.3xx as it worked with it as I described. I also tried with Xp SP2's stack and it worked the same.

I've tried with widcomm 1.4xx and 3xx and with both the keyb didn't work. The PIN-code sections was grayed out as many ahs described. Haven't tried the version 4 yet, because all those widcomm versions I have tried are provided by Logitech and I haven't gotten any of the cracked versions work. But I'll try the version 4...

Hope it helps.

please help!! i have been trying this for ages and am just about to return the keyboard. i have d-link 120 bluetooth in my pc but it uses the xp sp2 drivers as they knock out the d-link software. is this possible to link with the d-link dongle and the microsoft drivers if so please could someone post a step by step. would be much appreciated as i am at my wits end trying this. the bluetooth finds the keyboard recognises it but thats about it. i tried without a passkey. keyboard didn't work and the pairing ended. help!! :( :no:

hi

i had the same problem with the belkin bluetooth adapter, so i uninstalled the belkin software and let widows xp sp2 find the bluetooth dongle.then i asked it add devices, it found the keyboard so i tried not assignig a passkey but windows told me everything was fine but the keyboard didn't work. so i asked windows to give the keyboard a passkey, i then pressed enter and added the key, works fine now. and looks lovely set up as part of my media centre.

585844389[/snapback]

tried this without passkey. so adding a pass key made it work yeah??

could it be that simple

  • 4 weeks later...

Using a Micro$oft Bluetooth 2.0 adapter and an Apple wireless keyboard was effortless to get to work together. It seems that people must be having problems with M$ Bluetooth 1.? adapters or some other Bluetooth Adapter.

The only problem is that the "=" on the number pad does not work BUT this can be remapped by using Sharpkeys. There is no scroll lock, print screen or pause break key either and all but the pause/break key can be remapped (who needs a scroll lock key anyways?)

Unfortunately, the volume up/down, mute and eject buttons don't work and I cannot find a work around for these.

The "clear" button maps automatically as a number lock key (this can also be remapped by Sharpkeys as well)

Where did i get a 2.0 adapter? ... Ebay of course (the only one I've seen - must of been with a keyboard or mouse combo unit from M$ that the seller didn't want or need).

The personal area network with Bluetooth Network Connection also automatically configured. (M$ must of worked the bugs out ... now they just need to sell the bluetooth usb item by itself).

  • 1 month later...

Boy was this a pain in the neck to figure out... and the solution isn't 100% pretty,

but it sure works well! I've come to the conclusion that the MX900's BT hub is not

that great... and D-Link's DBT-120 USB hub is wonderful! The 3.x WIDCOMM drivers

just don't like the Apple Wireless Keyboard in that it won't pair correctly since

the pairing key is never displayed (as mentioned by previous poster). Funny enough

the 1.x WIDCOMM drivers do infact work.... BUT the Apple Wireless keyboard

fails to connect at login time leaving you without a way to enter a password in

during login if you use the MX900 + WIDCOMM solution. SO in the end here is what

I used :

NO WIDCOMM drivers. I installed Logitech's Setpoint 2.2, but then unistalled WIDCOMM.

Use the DBT-120. That little sucker rocks!

Use Microsoft's Bluetooth stack... ugly windows but works great!

Only plug the MX900 base into the AC adapter and not into the computer...

(this disables the MX900's BT hub, but allows it to recharge the mouse batteries).

The MX900 mouse + Apple's Wireless Keyboard works 100% now.

If you have any questions please feel free to ask!!!

:yes:

I've got an old Epox dongle that's spare since I upgraded my mac's dongle to a DBT-120 (for headset support).

Out of curiosity, I plugged it in.

Windows picked it up and installed its own drivers, and it's ready to go. I disable BT on my mac and turn the keyboard off, then go to add device on the PC. Turn the keyboard on, click search, click add, type in a pairing code, hit next, type in in on the keyboard. Bang, one working apple bluetooth keyboard.

Just to make sure, I rebooted. About 5 seconds after i'm presented the desktop, the keyboard's working.

Typing this with it now :)

  • 3 months later...

Thank God I found this post.

I was close to my harakiri. ;)

I'm having exactly the same problem (the PIN that doesn't show up to be typed).

I'm using in my notebook (Acer Aspire 2012WLMi) an internal BT module from Actiontec (BTM-200). My OS is WinXP SP2. The installed driver is HP 3.0.1.905 (great, except by this little mess); the driver supports HID (human interface device).

I already tried 3.0.1.914 and 4.0.1.2101, both patched (that license file issue)

Keyboard is OK, since I've tested:

1. in several Macs. Flawless. Mac OS generates a PIN (yes, this one is showed on screen) and you just type in the KB.

2. in a desktop PC, with the Microsoft built-in driver (SP2). Same thing as Mac: you choose a PIN, type in KB and everything is working.

3. in a desktop PC, with some other driver versions from Widcomm. Sometimes, driver don't find the KB. Sometimes, finds and allows choosing a PIN (but after typing, you get an error).

In cases [2] e [3] I've tested in a desktop PC with a Olympia Bluetooth dongle (CSR-like). I'm trying to update my Actiontec internal module to use Microsoft's built-in (and very limited) driver, but I can't even choose it from the "Update driver" list. I uninstalled the most recent driver version, but the "Generic Bluetooth Radio" doesn't show up.

Any help would be really appreciated. Thanks in advance.

  • 4 months later...

Hello.

I bought an Apple Wireless Keybaord and a D-Link DBT-120 USB bluetooth dongle to try to use the keyboard with Windows XP. I installed the drivers that came with the

The keyboard is not being recognized.

Can anyone guide me through the proper steps to get the keyboard working?

Thanks,

Avi

Actually, I tried the procedure quoted below, and the Bluetooth Device Manager finds the keyboard, and I get the Add Bluetooth Device Wizard "Windows is Installing Your Device." Then I click finish. But the keyboard doesn't work, and when I close and reopen the Bluetooth Devices control panels, the keyboard does not show up.

Any thoughts??

Thanks,

Avi

I've got an old Epox dongle that's spare since I upgraded my mac's dongle to a DBT-120 (for headset support).

Out of curiosity, I plugged it in.

Windows picked it up and installed its own drivers, and it's ready to go. I disable BT on my mac and turn the keyboard off, then go to add device on the PC. Turn the keyboard on, click search, click add, type in a pairing code, hit next, type in in on the keyboard. Bang, one working apple bluetooth keyboard.

Just to make sure, I rebooted. About 5 seconds after i'm presented the desktop, the keyboard's working.

Typing this with it now :)

  • 1 month later...

Could someone please comment as to whether the "caps lock" led works when using with a PC? (I read somewhere that the Apple Bluetooth does have an onboard caps lock LED...can't say, I've not seen one but I want to buy one because of the small footprint).

Any other comments, specifically....

the keyboard feel

what sucks? (eg I've seen some comments that the keys are too close together etc)

are drops frequent?

Also is the general consensu to go with the D-Link bluetooth adapter?

Many thanks in anticipation.

Hank McSpank

[Yank it, crank it & then rip the knob off]

Im using bluetooth with XP but seem to be having trouble with the Apple BT wireless keyboard pairing.

Im using the D-Link 120 dongle.

Everytime I restart windows i need to pair it again or else it won't work. The keyboard also needs to be switched on and off before re pairing.

Windows recognizes the keyboard after booting but it won't establish two way communication to be able to type. It shows the icon of a checkmark instead of the usual two green arrows and two way comm in widcomm.

It works flawlessly if I dont restart.

Any ideas how to make it work????

Hi!

I've succeeded in getting the Apple Wireless Keyboard to work on XP. Thanx to gunpowda and other helpful posts!

I thought I'd share some tips... It wasn't easy... :rolleyes:

I've been using the wireless keyboard for a couple of days and it works extremely well. Here's what ya get:

  1. Keyboard auto-pairs invisibly before XP login. It just works. No futzing after each restart (that would have been a deal-killer)
  2. Caps lock light works correctly. All keys work, except the 4 multimedia keys top right. Haven't looked into that yet.
  3. In BIOS screens and other very early startup events, the bluetooth of course isn't running yet... :)
  4. So smooth. Nice and fast to type on. Quiet action. No interference or stickyness despite all the other wireless gear I've got running.

This is NOT a definitive how-to, but might inspire...

I'm using a fairly new Bluetooth USB adapter: "Trust Bluetooth 2.0 EDR USB Adapter, BT-2200Tp"

All the new Widcomm/Broadcom bluetooth stacks (versions 4.1+ and 5.0+) hit you with the grayed out pairing box Gunpowda posted about. It's a brick wall, don't bother trying to get around it.

You need an old Widcomm driver. Version 1.4 did the trick for me, but 1.3 and earlier may work.

1.4 finds the keyboard and prompts you with multiple choices for pairing: autopairing, choose PIN, et c.

Get to that screen and you're golden.

Driver repository: The GSM-HOSTING forum is great for pointers to very old (and v. recent) drivers.

http://forum.gsmhosting.com/vbb/showthread.php?t=106274

All the best -R.

Thanks everyone for your effort. I'm replying this post using apple wireless keyboard.

I'm glad i saw this post and do the right thing beofore i stepped out to buy BT adapter.

I'm using windows xp sp2 and DBT-120 adapter. The main issue i encounter is still replacing the MS BT driver with the widcomm driver come with DBT-120.

I found a good cocument teaching you how to:

http://www.e-beam.com/support/Switching_fr..._to_WIDCOMM.pdf

However, I have to do the switching driver thing in "safe mode" . Otherwise, the widcomm driver won't show up in the stack when i update the MS BT driver.

Now, everything works very good. :D

everyone ....strange things happened here.

MS BT generic driver seems working better than widcomm~~ :o

The thing is that i found the keyboard sometimes worked but sometimes didn't when i restarted the computer. I have to mannually disconnect and connect again.

Therefore i decided to uninstall widcomm driver and restart and then reinstall again and see if it can automatically get connected every time i restart.

And then of course the windows generic driver took place aftr i uninstall widcomm and restart the computer.

Then i suddenly had the idea that why don't i just give the generic driver a try before i reinstall widcomm driver and replace MS BT driver.

To my surprise, it works. Now i felt stupid that i spent lots of time yesterday just trying to figure out how to replace it with widcomm. :D

Hello all.

I am using my Apple Keyboard with the new drivers without having to revert to the old drivers.

Its very easy. It took me a while to figure out how, but here is how.

With the regedit modify these two values.

HKEY_CURRENT_USER\Software\Widcomm\BtConfig\General

Set

PinCodeWord

To a value of

1111

Set

UseFixedPin

To a value of

1

Then attempt pairing.

Whne you get to the greyed PIN screen on the Apple Keyboard type

1111

Then Press the Return key on the Apple keyboard

Voila paired.

I have attempted to try other ways subsequentl, but I could never figure out how to UNPAIR the keyboard.

BeDammit

Ok, my UK Mac bluetooth keyboard seems to work just fine with my microsoft bluetooth dongle on XP - nothing special to do ....it just worked.

BUT I have a simple key mapping problem that's driving me potty. ....

by using a british keyboard listed under regional & language input languages, I can either have my ? key mapped to it's correct key (ie above the number 3) BUT unfortunately the @ and " symbols are swapped

OR

by using a US keyboard listed under regional & language input languages, I can have the @ and " symbols on their correct keys BUT then I get a # instead of a pound sign!!

I can't seem to work out a way to get the ?, @ and " symbols on their correct keys! (& even if I did, where would the hash key be?!)

Edited by HankMcSpank
  • 1 month later...

Hello all.

I would like to thanks BeDammit for his brilliant solution.

I' ll add some extra information to help people flawless set up their Apple Bluetooth keyboard on Windows XP.

1. Press Win Start button, choose Run and then type regedit and press enter to access windows registry editor.

2. Into the registry editor search for and select -> HKEY_CURRENT_USER\Software\Widcomm\BtConfig\General

3. Set the key 'PinCodeWord' to a decimal value of 1111

4. Set the key 'UseFixedPin' to a decimal value of 1

5. Then attempt pairing. When you get to the greyed PIN screen type 1111 using OTHER keyboard THAN Apple Bluetooth keyboard.

6. Press the Return key on the Apple keyboard.

7. Enjoy your nice Keyboard.

I think this one is the best solution cause you don't have to mess with windcomm driver version.

Thanks again BeDammit.

Edited by dongaspa
  • 2 weeks later...

Hello to all,

Yeepee I also manged to get my Apple wireless Keyboard to work on my PC very well (4hours non-stop thought).

For info I have a BlueTooth USB Dongle running WIDCOMM drivers ver 1.4.2.8

I would just like to add some more info in there :

- 1

Keyboard is OK, since I've tested:

1. in several Macs. Flawless. Mac OS generates a PIN (yes, this one is showed on screen) and you just type in the KB.

2. in a desktop PC, with the Microsoft built-in driver (SP2). Same thing as Mac: you choose a PIN, type in KB and everything is working.

3. in a desktop PC, with some other driver versions from Widcomm. Sometimes, driver don't find the KB. Sometimes, finds and allows choosing a PIN (but after typing, you get an error).

- First of all I've never did install a BlueTooth device before that so I would like to add an important step there.

About point n?2 : you have to use 2 Keyboards, for sure you need your Apple Wireless Keyboard(AWKB) + another one that is working well to type in the PIN when pairing.

About point n?3 : I had exactly this problem but there is a solution after a reboot only when you choose to add a new Bluetooth device, just before clicking on detect, turn on your AWKB, it should be detected properly else go back then turn off your AWKB then try again until it detects your AWKB.

As soon as it is detected do not wait for the search for new devices to end : select the Apple keyboard in the list of detected devices then hit next as speed as possible.

You're now on the screen where you have to pair your AWKB to the computer, you have to be quick (i tried many timings believe me) remove the random number and enter with your other keyboar1111 i>then right after clicking on the button to start the pairing use your Apple Wireless KB to blind inpu1111 Enteri> it should detect it.

If you still have problems I noticed that it's better to input the digits from the numpad on the AWKB (because you have to hold shift to access other digits).

For some reason on some computers the Enter key either is the one from the numpad either it is the main Enter key.

2 - It's important to enter something different that 0000 if you have to login using ctrl+alt+suppr. because you won't be able to put that value in PinCodeWord. I also want to add that PinCodeWord is a Dword value you have to create.

3 - I found a very interesting program named autohotkey (http://www.autohotkey.com/) this one is a little jewel.

Scriptable remapping of all keyboards keys !! Woohoo

You can even have it to turn scripts to executables that mean you don't even have to install the soft to benefit of the remapping.

For now I remapped :

F13 to launch an app

F14 F15 F16 are Mute | Vol- | Vol+

I even phisically switch the F buttons with the Vol buttons so the illusion of controlling sound is perfect.

There's also a small OnScreenDisplay that pops up to show you the volume status each time you push Vol+ or Vol-. I told you thatthing was sweet !!!

= (numpad one) still nothing

Hope it helps,

Answer here if you want to test the my key mapping I'll put the exe online.

Edited by zerofil
  • 1 year later...
  • 3 weeks later...
  • 3 months later...
Hello all.

I would like to thanks BeDammit for his brilliant solution.

I' ll add some extra information to help people flawless set up their Apple Bluetooth keyboard on Windows XP.

1. Press Win Start button, choose Run and then type regedit and press enter to access windows registry editor.

2. Into the registry editor search for and select -> HKEY_CURRENT_USER\Software\Widcomm\BtConfig\General

3. Set the key 'PinCodeWord' to a decimal value of 1111

4. Set the key 'UseFixedPin' to a decimal value of 1

5. Then attempt pairing. When you get to the greyed PIN screen type 1111 using OTHER keyboard THAN Apple Bluetooth keyboard.

6. Press the Return key on the Apple keyboard.

7. Enjoy your nice Keyboard.

I think this one is the best solution cause you don't have to mess with windcomm driver version.

Thanks again BeDammit.

Thanks a lot dongaspa and BeDammit,

I tried for couple of hours to get the keyboard paired, I checked many internet forums until I got to this one.

I did exactly as in the instructions and voila! It works!

I'm extremely happy I got it working, I really love this keyboard for its size, design and functionality.

There is one more step which could be added to the instructions: after changing the registers' values I had to reboot

before successfully pairing the keyboard. But maybe this is common knowledge already :).

By the way, my configuration is Windows XP pro + SP2 and a Belkin BT dongle (driver version 5.0.1).

I should go now to sleep, its 1 a.m. but at least I solved the problem :).

thanks again,

AdiVio

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Amazon may use OpenAI and Nova models after Anthropic reportedly raises costs by Karthik Mudaliar Amazon is reportedly considering to use OpenAI models and even its own Nova family of AI models after Anthropic raised the cost of using Claude inside Amazon services. According to a report from The Information, Amazon is weighing its options to reduce costs under a new arrangement with Anthropic. But back in April, Amazon said it would invest $5 billion more in Anthropic, with the possibility of adding up to another $20 billion if certain commercial milestones are met. That investment actually came on top of another $8 billion Amazon had already put into the Claude maker. Anthropic, meanwhile, committed to spend more than $100 billion over 10 years on AWS technologies, including Amazon’s Trainium chips. Amazon isn't just a customer of Anthropic but also one of the most important backers and cloud partners. This is why it makes it interesting that Amazon is considering other alternatives to handle its internal workloads. Although Amazon has been building its own options for a while now. Its Nova family of AI models was announced in late 2024 for Amazon Bedrock, with models aimed at text, image, and video tasks. Amazon pitched the model around cost and latency at that time. With that said, OpenAI has also become a more realistic option recently for AWS customers as well as for Amazon itself. Earlier this year, OpenAI brought its latest models and Codex coding agent to Amazon Bedrock, after changes to its previously more restrictive Microsoft cloud arrangement. This allowed AWS to serve even those customers who wanted other alternatives from Claude, without having to move workloads out of Amazon's cloud. Evaluating alternatives could also be due to commercial pressure and not necessarily a sign of a damaged partnership between Amazon and Anthropic. Whether or not Amazon is actually considering switching entirely to OpenAI's models or its own Nova models remains unknown at this moment.
    • Samsung introduces new AI classroom tools and interactive displays at ISTELive 2026 by Fiza Ali Samsung has announced several new education-focused software features and interactive displays for schools during ISTELive 2026, taking place in Orlando, Florida, from 28 June to 1 July. The focus of these updates is on making shared classroom displays easier to use for teachers while giving IT administrators more control over managing devices. One of the key additions is the Samsung Account Management Solution (AMS). In many schools, multiple teachers share the same interactive display throughout the day, which means signing in and setting everything up can become repetitive. With AMS, teachers can log in by scanning a QR code or tapping an NFC-enabled ID card. Once signed in, their personalised workspace, including wallpapers, bookmarks, app shortcuts, and files, can be instantly accessed through Home Personalisation. Samsung has also included a screen lock feature, allowing teachers to lock the display if they need to step away briefly. Furthermore, the company is also updating its Education Portal with new tools designed for school IT administrators. The portal will allow IT administrators to register teachers, enrol devices, and manage user access from a central dashboard. Administrators can also link NFC cards to teacher accounts, making sign-ins quicker across shared displays. Another addition is a Tags feature that lets schools organise displays by building or classroom. Those tags can also be used to send emergency notifications to selected Samsung Interactive Displays through compatible platforms such as InformaCast and Raptor. Moreover, the tech giant's AI Assistant is gaining several new features aimed at supporting everyday classroom tasks such as lesson planning and classroom engagement. One of the features is Circle to Search, which lets teachers circle text or images on the display to quickly find related information, videos, or web results without interrupting the lesson. The content can then be brought into Samsung Whiteboard. Another feature, Live Transcript, converts spoken lessons into real-time captions, which could be useful for students with hearing impairments or those in multilingual classrooms. The AI Assistant also introduces AI Summary and AI Quiz. The summary tool creates summaries of recorded lessons, while AI Quiz generates questions based on lesson content so teachers can quickly check how well students are following along. Teachers signed in through Samsung AMS can also return to their previous AI-generated lesson materials without logging in again. Alongside the software updates, Samsung has expanded its Android-based Interactive Display range with three new models: the WAF-S, WAFX-PS, and WAHX-M. The WAF-S and WAFX-PS ship with Android 16, bringing updates to security, accessibility, and overall usability while maintaining compatibility with Google's education services including Google Classroom and Google Drive through EDLA certification. Meanwhile, the new WAHX-M is the biggest addition to the lineup, introducing a 98-inch display for larger spaces such as lecture halls and conference rooms. It will also be available in 65-inch, 75-inch and 86-inch sizes. Samsung says the WAHX-M further includes on-device AI features such as voice commands, text-to-speech, and an AI calculator, alongside support for Samsung AMS and AI Assistant. Samsung AI Assistant has been available since April, while Samsung AMS and the updated Education Portal will begin rolling out in July.
    • It's been $24 (single) or $89 (4-pack) for many days on both Amazon and Walmart as far as I know. That isn't a big discount. If these end up like the 1st gen, the 4-pack will routinely get down around $80, give or take a dollar. I think they have even hit $69 at times.
    • Microsoft brings Claude to its own Azure infrastructure, powered by Nvidia GB300 Blackwell by Karthik Mudaliar Anthropic's Claude models are now generally available in Microsoft Foundry on Azure and are running on Nvidia's GB300 Blackwell Ultra systems. Nvidia wrote in its announcement that the models are hosted on Microsoft Azure and accelerated by GB300 Blackwell Ultra GPUs, with Quantum-X800 InfiniBand networking used to support larger agentic systems and specialized sub-agents that can operate across business domains. This is great for customers and enterprises that want to build autonomous and domain-specific AI agents using Claude without moving outside Microsoft’s cloud platform. Microsoft currently offers Claude models in Foundry in two forms: “Hosted on Azure,” which runs end-to-end on Azure infrastructure and is generally available, and “Hosted on Anthropic infrastructure,” which remains in preview. This separation is quite important for organizations that have procurement, compliance, data processing, or internal governance requirements tied to Azure. Anthropic currently has 11 Claude models listed in Microsoft Foundry, including Opus 4.8, Sonnet 4.6, and even the unavailable Mythos and Fable models. Billing is handled through Claude Consumption Units (CCUs). Microsoft says CCU is an invoicing unit for Claude models in Foundry, with token usage converted using Anthropic’s published per-model token rates. The usage is billed through Azure Marketplace just like models from other distributors and appears on the customer's Azure invoice, while eligible spend can count against a Microsoft Azure Consumption Commitment. For starters, GB300 NVL72 is a rack-scale, fully liquid-cooled system that combines 72 Blackwell Ultra GPUs and 36 Grace CPUs. Nvidia has listed 37TB of fast memory, 130TB/s of NVLink bandwidth, and FP4 Tensor Core performance of up to 1,440 petaflops with sparsity. The deal is also part of a three-way partnership between Microsoft, Nvidia, and Anthropic. Under the deal, Anthropic has committed to buying $30 billion in Azure compute capacity and contracting additional capacity up to one gigawatt. Nvidia and Microsoft also said they would invest up to $10 billion and $5 billion in Anthropic, respectively.
    • WhatsApp is getting usernames, and you can reserve your preferred one now by Fiza Ali Sharing your phone number isn't always something you want to do, especially with people you've just met. Whether it's someone from a class, a local community group, or a sports team chat, handing over your number can feel like giving away more personal information than necessary. That's exactly the problem WhatsApp is trying to solve with its upcoming usernames feature. The company has announced that users can now reserve a unique WhatsApp username ahead of the feature's wider rollout later this year. Once usernames become available, they'll let people connect without revealing their phone numbers. It's a change that makes a lot of sense for group chats. Right now, everyone in the group can see your phone number. With usernames enabled, that won't necessarily be the case when someone contacts you for the first time. WhatsApp says it's opening username reservations early because more than three billion people use the app, meaning plenty of people are likely to want the same usernames. Reserving one now gives users a better chance of securing the name they actually want before the feature launches more broadly. If your preferred username is already taken, WhatsApp will also offer a built-in username generator to suggest available alternatives. The feature isn't only aimed at individual users. Creators, businesses, and organisations will be able to claim the same username they already use on Instagram or Facebook, making it easier to keep a consistent identity across Meta's apps. Furthermore, privacy is a big part of how WhatsApp is introducing usernames. There won't be a public directory where people can browse or search for usernames. Instead, people will need to know your exact username before they can start a conversation with you. Additionally, users can also choose to enable a username key, which adds another layer of control by requiring people to enter that key before sending a message. Once the feature rolls out, people who choose to use a username will no longer have their phone number shown when messaging a person or business for the first time. If you want to reserve a username, make sure you're running the latest version of WhatsApp, then head to Settings > Account > Username. The tech giant says usernames will roll out gradually over the coming months, and users will receive an in-app notification when the feature becomes available in their country.
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      536
    2. 2
      +Edouard
      269
    3. 3
      PsYcHoKiLLa
      150
    4. 4
      Steven P.
      98
    5. 5
      macoman
      65
  • Tell a friend

    Love Neowin? Tell a friend!