Windows Vista: Disabling Services


Recommended Posts

I am not responsible for what you do to your Vista installation.

I suggest we use this thread to suggest to each other which services can be turned off, because we do not need them. This is a work in progress. I did not follow this post 100% and neither should you. Change services according to your computer config. If you do not have one of these services, chances are you already disabled the option in 'Turn Windows features on or off' or you are running a different edition of Windows Vista. Setting an Automatic service to Disabled will make sure it will not start when you boot up. Setting a Manual service to Disabled has no effect on performance and will only stop Vista from launching the service when it the OS believes it is needed.

Note: the default options are for Vista Ultimate. Some are obviously different.

A good application for saving presets of your services is: http://p-nand-q.com/download/pserv_cpl.html

Start > services.msc > Enter

Winkey + R > services.msc > Enter

Application Experience - Default: Automatic (Started)

- Safe: Leave as is

Application Information - Default: Manual (Started)

- Safe: Leave as is

Application Layer Gateway Service - Default: Manual

- Used for certain software services | If this service is started already, leave on Manual (Safe) | If it is not, set to Disabled

Application Management - Default: Manual

- If you don't "deploy software through Group Policy", Set to Disabled

Background Intelligent Transfer Service - Default: Automatic (Delayed Start) (Started)

- Safe: Leave as is (unless you don't use Windows Update)

Base Filtering Engine - Default: Automatic (Started)

- Disabling this service reduces security of the OS (needed for firewall, some unusual protocols, remote access, and internet connection sharing), Safe: Leave as is

Block Level Backup Engine Service - Default: Manual

- Since this service is on manual and does not start, it may be needed at some point, but it isn't a critical service

Certificate Propagation - Default: Manual

- If you don't use Smart Cards, Safe: Set to Disabled

CNG Key Isolation - Default: Manual

- This service may be needed if you are on Wired/Wireless Lan Autoconfig Since and will be using EAP (Extensible Authentication Protocol), Otherwise: Set to Disabled

COM+ Event System - Default: Automatic (Started)

- Responsible for many things including the Backup and Restore Center, Safe: Leave as is

COM+ System Application - Default: Manual

- Since this service is on manual and does not start, it may be needed at some point, but it isn't a critical service

Computer Browser - Default: Automatic

- If you aren't on a network, Safe: Set to Disabled

Cryptographic Services - Default: Automatic (Started)

- Needed for some connections/websites (Microsoft/Windows Update?), confirms signatures of windows files, Safe: Leave as is

DCOM Server Process Launcher - Default: Automatic (Started)

- Safe: Leave as is

Desktop Window Manager Session Manager - Default: Automatic (Started)

- If you don't use the advanced Aero Glass transparency interface, Safe: Set to Disabled

DFS Replication - Default: Manual

- If you aren't on a network, Safe: Set to Disabled

DHCP Client - Default: Automatic (Started)

- Typically needed for most Internet Connections (maybe not if you have a static IP), Safe: Leave as is

Diagnostic Policy Service - Default: Automatic (Started)

- If you don't care for Windows finding solutions to problems (including fixing internet connection problems in vista and ie7), Safe: Set to Disabled

Diagnostic Service Host - Default: Manual

- If you don't care for Windows finding solutions to problems, Safe: Set to Disabled

Diagnostic System Host - Default: Manual (Started)

- If you don't care for Windows finding solutions to problems, Safe: Set to Disabled

Distributed Link Tracking Client - Default: Automatic (Started)

- If you don't have links between NTFS Files, Safe: Set to Disabled

Distributed Transaction Coordinator - Default: Manual

- Since this service is on manual and does not start, it may be needed at some point, but it isn't a critical service (Set to Disabled)

DNS Client - Default: Automatic (Started)

- Needed once in a while, Safe: Leave as is

Extensible Authentication Protocol - Default: Manual

- Disabling this service reduces security of the OS (needed for firewall, some unusual protocols, remote access, and internet connection sharing), Safe: Leave as is

Fax - Default: Manual

- If you don't use a fax or a scanner, Safe: Set to Disabled

Function Discovery Provider Host - Default: Manual (Started)

- If not on a network (needed for certain uncommon network components), Safe: Set to Disabled

Function Discovery Resource Publication - Default: Automatic (Started)

- If not on a network (needed for certain uncommon network components), Safe: Set to Disabled

Group Policy Client - Default: Automatic (Started)

- Safe: Leave as is (can technically be disabled if not used, will look into possible problems later)

Health Key and Certificate Management - Default: Manual

- Safe: Set to Disabled

Human Interface Device Access - Default: Manual

- If you don't use the extra buttons on your keyboard or use the software for it, Safe: Set to Disabled

IKE and AuthIP IPsec Keying Modules - Default: Automatic

- Safe: Set to Disabled

Infrared Monitor service - Default: Automatic (Started)

- If you don't have/use infrared, Safe: Set to Disabled

Interactive Services Detection - Default: Manual

- Since this service is on manual and does not start, it may be needed at some point, but it isn't a critical service (Set to Disabled)

Internet Connection Sharing (ICS) - Default: Disabled

- Possibly not needed (will look into), Safe: Leave as is

IP Helper - Default: Automatic (Started)

- If you don't want IPv6 support, Safe: Set to Disabled

IPsec Policy Agent - Default: Automatic (Started)

- Possibly not needed (will look into), Safe: Leave as is

KtmRM for Distributed Transaction Coordinator - Default: Automatic (Delayed Start)

- Possibly not needed (will look into), Safe: Leave as is

Link-Layer Topology Discovery Mapper - Default: Manual

- Since this service is on manual and does not start, it may be needed at some point, but it isn't a critical service

Microsoft .Net Framework NGEN v.20.50727_X64/X86 - Default: Manual

- Safe: Leave as is

Microsoft iSCSI Initiator Service - Default: Manual

- If you don't use iSCSI, Safe: Set to Disabled

Microsoft Software Shadow Copy Provider - Default: Manual

- Since this service is on manual and does not start, it may be needed at some point, but it isn't a critical service

Multimedia Class Scheduler - Default: Automatic (Started)

- Needed for Windows Audio, Safe: Leave as is

Net.Tcp Port Sharing Service - Default: Disabled

- Safe: Leave as is

Netlogon - Default: Manual

- Since this service is on manual and does not start, it may be needed at some point, but it isn't a critical service (Set to Disabled)

Network Access Protection Agent - Default: Manual

- Safe: Set to Disabled

Network Connections - Default: Manual (Started)

- Unless you aren't using the internet, Safe: Leave as is

Network List Service - Default: Automatic (Started)

- Unless you aren't using the internet, Safe: Leave as is

Network Location Awareness - Default: Automatic (Started)

- Unless you aren't using the internet, Safe: Leave as is

Network Store Interface Service - Default: Automatic (Started)

- Unless you aren't using the internet, Safe: Leave as is

Offline Files - Default: Automatic (Started)

- Unless you use them, Safe: Set to Disabled

Parental Controls - Default: Manual

- Unless you use them, Safe: Set to Disabled

Peer Name Resolution Protocol - Default: Manual

- Unless you use Windows Meetings, Safe: Set to Disabled

Peer Networking Grouping - Default: Manual

- Unless you use such applications, Safe: Set to Disabled

Peer Networking Identity Manger - Default: Manual

- Safe: Set to Disabled

Performance Logs & Alerts - Default: Manual

- Needed for many features of Windows, Safe: Leave as is

Plug and Play - Default: Automatic (Started)

- Unless you don't connect various devices often, Safe: Leave as is

PnP-X IP Bus Enumerator - Default: Manual

- Since this service is on manual and does not start, it may be needed at some point, but it isn't a critical service (Set to Disabled)

PNRP Machine Name Publication Service - Default: Manual

- Safe: Set to Disabled

Portable Device Enumerator Service - Default: Automatic (Started)

- If you do not own a portable device, Safe: Set to Disabled

Print Spooler - Default: Automatic (Started)

- If no printer (including virtual ones) is present on the computer, Safe: Set to Disabled

Problem Reports and Solutions Control Panel Support - Default: Manual

- If you don't use it, Safe: Set to Disabled

Program Compatibility Assistant Service - Default: Automatic (Started)

- If you don't use the Program Compatibility Assistant, Safe: Set to Disabled

Protected Storage - Default: Manual

- If you don't save passwords, Safe: Set to Disabled

Quality Windows Audio Video Experience - Default: Manual

- If you don't need it, Safe: Set to Disabled

ReadyBoost - Default: Automatic (Started)

- If you don't use USB drives as a memory boost, Safe: Set to Disabled

Remote Access Auto Connection Manager - Default: Manual

- If you won't be connecting to your computer remotely, Safe: Set to Disabled

Remote Access Connection Manger - Default: Manual (Started)

- If you won't be connecting to your computer remotely, Safe: Set to Disabled

Remote Procedure Call (RPC) - Default: Automatic (Started)

- Vital, Safe: Leave as is

Remote Procedure Call (RPC) Locator - Default: Manual

- Possibly not needed (will look into), Safe: Leave as is

Remote Registry - Default: Manual

- Recommended: Set to Disabled

Routing and Remote Access - Default: Disabled

- Typically not needed, Safe: Leave as is

Secondary Logon - Default: Automatic (Started)

- If you are only running vista with one user, Safe: Set to Disabled

Security Accounts Manager - Default: Automatic (Started)

- If you don't use Global Policy Editor, Safe: Set to Disabled

Security Center - Default: Automatic (Delayed Start) (Started)

- If you don't use the Security Center, Safe: Set to Disabled

Server - Default: Automatic (Started)

- If you don't plan to send files or print them over a network, Safe: Set to Disabled

Shell Hardware Detection - Default: Automatic (Started)

- If you don't use Autoplay, Safe: Set to Disabled

SL UI Notification Service - Default: Manual

- Not required on most setups (needed for Tablet Input Panel) but may break the control panel, Safe: Leave as is

Smart Card - Default: Manual

- If you don't use Smart Cards, Safe: Set to Disabled

Smart Card Removal Policy - Default: Manual

- If you don't use Smart Cards, Safe: Set to Disabled

SNMP Trap - Default: Manual

- If not on a network with SNMP, Safe: Set to Disabled

Software Licensing - Default: Automatic (Started)

- Needed for the Control Panel and other parts of Windows to function (Tablet Input Panel for Tablets), Safe: Leave as is

SSDP Discovery - Default: Automatic (Started)

- If you don't have such devices, Set to Disabled

Superfetch - Default: Automatic (Started)

- Safe: Leave as is

System Event Notification Service - Default: Automatic (Started)

- Typically not needed (event log may display an error if disabled) Safe: Leave as is

Table PC Input Service - Default: Automatic (Started)

- If you don't have a tablet PC, Safe: Set to Disabled

Task Scheduler - Default: Automatic (Started)

- Needed for various Windows and 3rd Party Programs, Safe: Leave as is

TCP/IP NetBIOS Helper - Default: Automatic (Started)

- If you won't be sharing files between computers, Set to Disabled

Telephony - Default: Manual (Started)

- Needed for dial-up and certain DSL connections, Safe: Leave as is

Terminal Services - Default: Automatic (Started)

- If you don't plan to administer remote computers, Safe: Set to Disabled

Terminal Services Configuration - Default: Manual

- If you don't plan to administer remote computers, Safe: Set to Disabled

Terminal Services UserMode Port Redirector - Default: Manual

- If you don't plan to administer remote computers, Safe: Set to Disabled

Themes - Default: Automatic (Started)

- If you are using Windows Classic, Safe: Set to Disabled

Thread Ordering Server - Default: Manual

- Safe: Leave as is

TPM Base Services - Default: Manual

- Used for hardware certificates, Safe: Leave as is

UPnP Device Host - Default: Automatic (Started)

- If you don't use UPnP, Safe: Set to Disabled

User Profile Service - Default: Automatic (Started)

- Safe: Leave as is

Virtual Disk - Default: Manual

- Since this service is on manual and does not start, it may be needed at some point, but it isn't a critical service

Volume Shadow Copy - Default: Manual

- Needed for some integrated backups, since this service is on manual and does not start, it may be needed at some point, but it isn't a critical service

WebClient - Default: Automatic (Started)

- If you don't use web folders, Safe: Set to Disabled

Windows Audio - Default: Automatic (Started

- Safe: Leave as is

Windows Audio Endpoint Builder - Default: Automatic (Started)

- Safe: Leave as is

Windows Backup - Default: Manual

- If you don't use it, Safe: Set to Disabled, Recommended: Leave as is

Windows CardSpace - Default: Manual

- If you don't use it, Safe: Set to Disabled

Windows Color System - Default: Manual

- Safe: Leave as is

Windows Connect Now - Config Registrat - Default: Manual

- Safe: Set to Disabled

Windows Defender - Default: Automatic (Started)

- If you don't use it, Safe: Set to Disabled, Recommended: Leave as is

Windows Driver Foundation - User-mode Driver Framework - Default: Manual

- Safe: Leave as is

Windows Error Reporting Service - Default: Automatic

- If you don't use it, Safe: Set to Disabled, Recommended: Leave as is

Windows Event Collector - Default: Manual

- Safe: Leave as is

Windows Event Log - Default: Automatic (Started)

- Safe: Leave as is

Windows Firewall - Default: Automatic (Started)

- If you don't use it, Safe: Set to Disabled, Recommended: Leave as is

Windows Image Acquisition (WIA) - Default: Manual

- If you don't have a scanner/camera, Safe: Set to Disabled

Windows Installer - Default: Manual

- Safe: Leave as is

Windows Management Instrumentation - Default: Automatic (Started)

- Safe: Leave as is

Windows Media Center Extender Service - Default: Disabled

- Safe: Leave as is

Windows Media Center Receiver Service - Default: Manual

- If you don't use it, Safe: Set to Disabled

Windows Media Center Scheduler Service - Default: Manual

- If you don't use it, Safe: Set to Disabled

Windows Media Center Service Launcher - Default: Automatic (Delayed Start) (Started)

- If you don't use it, Safe: Set to Disabled

Windows Media Player Network Sharing Service - Default: Manual

- If no portable device is owned, Set to Disabled

Windows Modules Installer - Default: Manual

- Certain Windows Updates require it, Safe: Leave as is

Windows Presentation Foundation Font Cache 3.0.0.0 - Default: Manual

- Safe: Leave as is

Windows Remote Management (WS-Management) - Default: Manual

- If you don't plan to administer remote computers, Safe: Set to Disabled

Windows Search - Default: Automatic (Started)

- If you don't use it, Safe: Set to Disabled, Recommended: Leave as is

Windows Time - Default: Automatic (Started)

- If you don't plan to sync the clock with a server, Safe: Set to Disabled

Windows Update - Default: Automatic (Delayed Start) (Started)

- If you don't use it, Safe: Set to Disabled, Recommended: Leave as is

WinHTTP Web Proxy Auto-Discovery Service - Default: Manual

- Almost always not needed, Safe: Set to Disabled

Wired/WLAN AutoConfig - Default: Manual

- If you don't use it, Safe: Set to Disabled

WMI Performance Adapter - Default: Manual

- Safe: Leave as is

Workstation - Default: Automatic (Started)

- Unless you are having a major lag during boot time or if you plan on being on a LAN, Safe: Leave as is

Please inform me about mistakes, what you have found and what you would change :)

Edited by Slimy
Link to comment
https://www.neowin.net/forum/topic/513758-windows-vista-disabling-services/
Share on other sites

I was considering doing that and showing everyone what I disable, but there really is no point. Everyone uses their computer for different things and therefore uses different services. The point of this thread is for anyone to be able to go through the list making their own decisions for each service, based on how they use their computer :)

You could add my At-A-Glance screenshot of how I've set up my services - it turned out very safe and stable for me :)

Those who don't want to read through the entire post for the recommended settings can determine with a simple look at the screenshot if it's safe to turn off that service.

The list is sorted alphabetically by startup type - the first group is "Automatic", the second is "Disabled" and the third is "Manual".

vista-dienste.png

There are some services that don't appear if you don't have the hardware for it, like infrared. I don't have that one either so one less thing for me to disable. I've safely disabled things like Fax, Print Spooler and anything Smart Card related but everything else I've left alone.

There are some services that don't appear if you don't have the hardware for it, like infrared.

Hmm, I didn't know that. I just assumed everything was installed just in case you would be making a hardware upgrade...

I guess my list isn't as complete as I thought it was :pinch:

You could add my At-A-Glance screenshot of how I've set up my services - it turned out very safe and stable for me :)

Those who don't want to read through the entire post for the recommended settings can determine with a simple look at the screenshot if it's safe to turn off that service.

The list is sorted alphabetically by startup type - the first group is "Automatic", the second is "Disabled" and the third is "Manual".

vista-dienste.png

What language is that screenshot in? German?

How many languages is Vista RTM currently available in?

What language is that screenshot in? German?

How many languages is Vista RTM currently available in?

Yes, it's German. I'd say that the Rtm is currently avaiable in English, German and Japanese, just like the RCs, and other languages will take a while to appear. Translating an entire OS takes its time.

  • 3 weeks later...
  • 2 weeks later...

if services are on manual they do not really need to be disabled seeing as they are not active until something needs to use that service therefore not using any resources. Microsoft have actually done a great job on minimizing it down to only what is needed for a typical system, not much needs to be changed.

anyone know which services depend "Help and Support" in the taskbar? it does not work in mine now :(

Go to the Services control panel, right-click on the?"Help and Support" service and select "Properties". On the last tab you can see what services this one depends on. Check that they're not deactivated.

Thanks for the list, Slimy. It's been really useful. I've turned off everything possible. I only have the necessary things to make my system work and connect to the internet. I didn't see much performance difference, but boot time is a lot shorter.

I want to post my settings here to discuss and to give people an idea what can be safely turned off, but I don't know how I can do it easily. How can I export my services settings as a list so I can copy and paste here?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Ummmm that is what is it supposed to do. Just turn if off in settings if you do not want it analyzing your open tabs. Chrome does the same thing with Gemini. Sarfari will do the samething after Apple's AI and even more so with the release of their 27 versions that is now powered by Googles LLM/ML models. Understanding why it is doing it and how it can help you vs jumping to some conspiracy theroy is a much better approach. As long as it can be turned off, all is good. Yes the default should be off but the a lot of people would never discover these features.
    • Just another reason (aside from many others) not to use Edge. Firefox 153.0b5 DEx64 has a similar feature added recently in prior builds that I will turn off at some point when I get around to it. It's the new "Something looks suspicious" page that pops up here and there. It cleverly hides itself between web pages that I've actually visited; as a result, you know, of selecting a web page and telling the browser where to go. The interesting thing is that it does not produce these warnings from pages that I, as the only intelligent user of the browser in my system, have ever directed the browser to open! What seems to be happening is that the browser looks at all the goofy ad links on a web page I do actually open and selects one that "looks suspicious" and then creates the "something looks suspicious" web page, which is neatly inserted, as mentioned, between web pages my RB ("real brain") has directed the browser to load in a session. The thing is, I usually look at links I am considering to follow before I ask the browser to load them, and in cases I have noticed where the link does indeed look suspicious, most of the time I will choose to not follow the link at all. Doesn't everyone do this or something similar? I am picky about what I voluntarily load... (I don't like links that start off fine, with a site designaiton that seems normal enough but then is followed by indecipherable alphanumeric strings many, many lines long, etc. I tend to reject those because they look suspicious. They may not be, but I don't care... I'll stay with Firefox, of course, if for no other reason than they usually let you turn off the junk you don't like. And because it isn't Edge... But at some point Microsoft will come to realize that putting your bookmarks on the left side is a Good Thing for a lot of people, just as Microsoft discovered when it had the bright idea of nailing the Windows taskbar to the bottom of the screen, when for decades Microsoft browsers had left that placement up to the user. They have finally reversed the obscenity of that decision. Finally.
    • Google was using the old CATPCHAs data to train their LLMs. What is the say they won't use this camera data of users to train their LLM? these companies need some strict regulations!
    • Depends on what you need. Might be a bit clearer on what you plan to do with it. Sort of a waste if you get the newest and greatest, but don't know how to use it.
    • NTLite 2026.06.11200 by Razvan Serea NTLite is a Windows configuration tool that allows you to modify your existing Windows install or an image yet to be deployed, remove Windows components, configure and integrate, speed up the Windows deployment process. Reduce Windows footprint on your RAM and storage drive memory. Remove components of your choice, guarded by compatibility safety mechanisms, which speed up finding that sweet spot. Windows Unattended feature support, providing many commonly used options on a single page for easy setup. Easily integrate a single or multiple drivers, update or language packages. Package integration features smart sorting, enabling you to seamlessly add packages for integration and the tool will apply them in the appropriate order, keeping hotfix compatibility in check. One of the important new features of NTLite (compared to its predecessors) is the ability to modify an already installed the operating system, by removing unnecessary components. Supports Windows 11, 10, 8.1 and 7, x86 and x64, live and image. Server editions of the same versions, excluding support for component removals and feature configuration. ARM64 image support in the alpha stage. Does not support Checked/Debug, Embedded, IoT editions, nor Vista or XP. NTLite 2026.06.11200 changelog: New Secure Boot Migration support: Verification, certificate staging, and boot-manager/sector update across the Image, Updates, Apply, and Create-ISO pages (2023 CA migration, optional 2011 revocation, Anti-rollback, Boot sector choice etc) Secure Boot Host Readiness: Live host Secure Boot migration monitor and Servicing-task control Option under Image page - C:\Windows row, or load the host as the target - Updates - Secure Boot Image: 'Sort mounted images first' option for the image list in Menu-Settings UI: Hover description card for Components and Unattended pages, selectable text and quick access to Compatibility options Command line: Relay commands into the already-running instance Enables controlling already running NTLite via ntlite.exe Use /NewInstance to launch an additional instance using CLI operations (premium) UI: 'New instance' option via main menu instead of a secondary ntlite.exe prompt Apply: Hide individual Apply-page notes with a per-note dismiss (X), critical excluded Settings: 'Unsigned RDP file launch warnings' tweak (RDP client), bypassing the April 2026 security-update prompt on RDP connections Upgrade Image: Live OS and deployed image editing now unlocked on free/test licenses, same licensing as images Image: 'Recompress' option in manual dialog Remove Editions to shrink the WIM in one session Image: SWM part size set inline on the Apply page and image dialogs, split-size popup retired Image: Relative 'Last change' dates; editions grouped by build time to reduce noise Image: 'Forget - Missing' on the Edit-cache menu to mass drop entries whose folder is gone Components: Root groups reorganized - user-facing groups first, system/critical last Components: Show filter options to view components by Template or App-type, since Apps are now merged into groups Presets: Delete confirmation now lists the multi-selected preset names UI: Design update propagated to the rest of the tool UI: Filter and search match words in any order and partially, better results filtering Components Unattended: Input-locale language derives from the user locale, with an independent keyboard picker, enables combinations previously unavailable Unattended: Input-locale now allows for a user value override Unattended: Localization OOBE WinPE now can be copied with the new WinPE Copy OOBE localization toggle, enter locale settings once for both stages Updates: Downloader greys and locks updates the image already carries (hotfix and MSIX) Updates: Resume interrupted update downloads Command line: Many upgrades, see /?, now prints help to the console or redirected output UI-Translation: Finnish language added, also thanks for Chinese Traditional (Matt), French (tistou77), Italian (clarensio), Russian (RDS), Swedish (1FF), Vietnamese (Vu Anh Vu) Fix Components: Containers removal breaking Apps deployment Components: Microsoft Account had leftovers when Easy Migrate is kept Image: Export to an existing WIM improvements, Append renamed to Merge Image: Improved 26H1 live removal support Image: No more 'X:\ not accessible' popup for certain drives during image scan Presets: Manual image refresh picks up presets added/removed outside the app Tweaks: Disabled visual-effect animations no longer return after first logon on a new profile Tweaks: Live Visual Effects toggles (animations, drag full windows, font smoothing) now apply correctly Download: NTLite 2026.06.11200 | 20.5 MB (Free, paid upgrade available) Link: NTLite Home Page | NTLite Features | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
    • First Post
      carols23 earned a badge
      First Post
    • One Month Later
      Tom Willson earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      506
    2. 2
      +Edouard
      257
    3. 3
      PsYcHoKiLLa
      151
    4. 4
      Steven P.
      94
    5. 5
      macoman
      67
  • Tell a friend

    Love Neowin? Tell a friend!