Windows Vista SP1 RC Refresh 2


Recommended Posts

Windows Vista Service Pack 1 RC Refresh 2 is available to Beta testers through Windows Update. Experience the WU installation path for Windows Vista SP1 by following 4 simple steps and give us your feedback to improve our quality.

Notice: The following Windows Vista Service Pack 1 (SP1) builds represent RC Refresh 2 code. These builds incorporate all tested changes up to Microsoft's RC Refresh 2 date. Please note that these builds are provided for additional beta testing purposes only and may not be distributed. These builds are provided to you "as is" and are subject to change. Your right to use these builds will expire upon Microsoft's commercial release of SP1 to the public.

Systems running on Windows Vista RTM typically require two or three updates before SP1 can be installed. These updates are permanent on your Windows Vista systems. Windows Update will detect your system configuration and offer the prerequisite packages that are applicable to your system. Based on the state of your system, Windows Update will offer you all the applicable prerequisite packages and SP1 in a sequential order. For details, please see the instructions below.

If you already installed the Service Pack to your machine, you must uninstall the previous build before installing RC Refresh 2.

Here are 4 simple steps to get SP1 on your machine.

On Vista RTM

1. Download the script to your machine and run it on elevated prompt after removing ".remove" from the filename.

? To run the script on elevated prompt, after you download the script, right click on the file and select "Run as administrator" option.

? The script sets a registry key on your system. The registry key is required for WU server to recognize your machine as a valid target for Vista SP1.

? After running the script, Windows Update automatic updates will automatically update your machine over the next several days with the appropriate prerequisites and then offer the Service Pack. If you would like to install SP1 quicker you can manually do the next few steps to speed up the process.

2. Install all pending "Important" updates and the pre-requisite updates for SP1. You may have to repeat this several times to get fully up to date.

? Check for updates on Windows Update. Go to Control Panel ? System and Maintenance ? Windows Update and check for updates by clicking on "Check for Updates" in the top left of the task pane.

? You will be offered all previously released Windows Vista updates that you may not have installed on your system. Install all applicable updates.

? If you have Windows Vista Ultimate, or Windows Vista Enterprise, Update for Windows (KB935509) should be in this list. If you have any other version, Update for Windows KB938371 should show up in this list. Reboot your machine when prompted. If you do not have Vista Ultimate or Enterprise, Update for Windows KB938371 should show up first and KB935509 is not required.

? If you reboot and rescan on Windows Update right away, sometimes times you may not see all updates. This may be caused by the installer service completing the install of the prior update. Please wait 5-10 minutes and scan again. (This delay should not be required for the final SP1 release.)

3. Install Update for Windows (KB937287).

? Update for Windows (KB937287) it does not require a reboot. This is the "installer" code for the service pack.

4. Install Windows Vista Service Pack 1 (KB936330).

? Wait for 10-15 minutes prior to checking for updates again, to enable the installer to complete it's self installation.

? Check for updates on Windows Update again. Windows Vista Service Pack 1 IKB936330) should be available.

Don't forget to post your mini-review in the newsgroups and complete the install survey located here: http://connect.microsoft.com/windows/Surve...x?SurveyID=5418.

Regards,

The Windows Beta Team

@echo off

well  lo0ks like those guys hate the fact that i give them access to the build
so...
enjoy the blank space now

for all the ppl

you can say thanks to the haters

Enjoy

For the admins:

i dont know if i can post the code or not

so if i cant please edit the thing

Edited by SaT117
Link to comment
https://www.neowin.net/forum/topic/615753-windows-vista-sp1-rc-refresh-2/
Share on other sites

lol, well I am sure that helped a few non-beta testers download the thing. Oh well. I really enjoyed RC1, it actually improved my network speed quite a bit compared to the first build.

yea its super fast and stable now :)

right now i have to uninstall the R1

to i can test the R2

i hope they made it faster :)

Erm, I really doubt it in this case. SP1 is already a public beta, and I doubt they really have many qualms with this since it promotes their product and really isn't anything secretive or anything that can defame them or put them in a bad light.

Erm, I really doubt it in this case. SP1 is already a public beta, and I doubt they really have many qualms with this since it promotes their product and really isn't anything secretive or anything that can defame them or put them in a bad light.

This release ISN'T a public release. Don't use a past release as an excuse to say the leak of this one doesn't hurt anything.

It hurts the people that actually want to test stuff and report bugs. The more people leak stuff, the groups they choose to test them get smaller and smaller and they'll choose people who've been testing software for them longer than others.

That's how it can hurt things. It can make it take longer to test and get the final versions out.

To the OP:

You knew you were breaking an NDA, that's if you're even part of the test group which I doubt you are. Either way you should know these e-mails always say not to say anything about them. You knew what you were doing posting it here so stop trying to argue with anyone who doesn't like what you're doing.

Unless you a corporate TAP tester you're never going to test stuff that actually matters so I am not sure why people think they are very important or part of a select group because they are MS beta tester, everyone is - get over it and stop being NDA police.

because like where I work, there are lots of very ridiculous rules that defy common sense at many places.. and there are people like me who like to use common sense, and there are others who say that rules are rules, and that's it.. of course they pay me to follow their nazi-like rules, so I do follow them. :)

Unless you a corporate TAP tester you're never going to test stuff that actually matters so I am not sure why people think they are very important or part of a select group because they are MS beta tester, everyone is - get over it and stop being NDA police.

lol...how else can these kidos be '1337'..i bet they wear 'im a beta tester' (written in magic marker) tee-shirts to school and when pulled over by police for speeding tell them..."but im a MS beta tester"....not only does MS give us a good OS but they give these kido's a worth of being something online because real life is too difficult for them to handle.

A fine example of someone who insted of sayin Thanks says crap

if u dont like it just close the window

and i bet that even with the comment

u alrdy use it

gezz...

what a haters

Exactly. There will always be whiners out there. Thanks though for the info on getting this installed!

Uninstalled the old SP1 RC refresh.

Ran the SP1_rcr2RK file, and found Install Update for Windows (KB937287).

Installed that, been about 20 min now, haven't seen any other updates or the SP yet. Any ideas?

Just keep refreshing...

I've installed it on my 32-bit version, and am currently installing it on my 64-bit version. It does take a little while for the service pack to show up.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • New AMD graphics driver fixes install issues and FSR 4.1 crashes on RX 7000 GPUs by Taras Buria AMD is rolling out yet another graphics driver. Version 26.6.4 is now available for download, bringing two important fixes. One is for those still using Windows 10 and having trouble installing driver 26.6.2. In fact, this patch is coming from the recently released hotfix, so it is not new if you are already running version 26.6.3. The second fix is for RX 7000 owners. AMD recently brought FSR 4.1 support to the previous-gen graphics cards, but there was a bug with certain games crashing when using FSR 4.1. I experienced this issue with Forza Horizon 6, so today's driver should take care of that. Here is the official changelog: Intermittent install issue seen when installing AMD Software: Adrenalin Edition 26.6.2 on Windows® 10 systems for Radeon™ RX 7000 series and above graphics products. Intermittent application crash may be observed in some games with AMD FSR Upscaling 4.1 enabled on Radeon™ RX 7000 series graphics products. Known issues include the following: Intermittent application crash or driver timeout may be observed while playing Battlefield™ 6 on AMD Ryzen AI 9 HX 370. AMD is actively working on a resolution with the developer to be released as soon as possible. Texture flickering or corruption may appear while playing Battlefield™ 6 with AMD Record and Stream on some AMD graphics products. AMD FSR Upscaling and AMD FSR Frame Generation may show as inactive in AMD Software: Adrenalin Edition while playing Battlefield™ 6 when enabled on Radeon™ RX 9000 series graphics products. Failure to install may be observed while installing AI Bundle components in some regions with limited access to HuggingFace and GitHub. Model flickering or rendering failure may be observed in Maxon Cinema 4D and Blender on Radeon™ RX 7000 series and above graphics products. Users experiencing this issue are recommended to install AMD Software: Adrenalin Edition 26.3.1. Intermittent application crash may be observed on some models while running Blender on Radeon™ RX 7000 series and above graphics products. Users experiencing this issue are recommended to install AMD Software: Adrenalin Edition 26.3.1. You can download the AMD Radeon driver 26.6.4 from the official website here. Full release notes are available on the same page.
    • Amazon may use OpenAI and Nova models after Anthropic reportedly raises costs by Karthik Mudaliar Amazon is reportedly considering to use OpenAI models and even its own Nova family of AI models after Anthropic raised the cost of using Claude inside Amazon services. According to a report from The Information, Amazon is weighing its options to reduce costs under a new arrangement with Anthropic. But back in April, Amazon said it would invest $5 billion more in Anthropic, with the possibility of adding up to another $20 billion if certain commercial milestones are met. That investment actually came on top of another $8 billion Amazon had already put into the Claude maker. Anthropic, meanwhile, committed to spend more than $100 billion over 10 years on AWS technologies, including Amazon’s Trainium chips. Amazon isn't just a customer of Anthropic but also one of the most important backers and cloud partners. This is why it makes it interesting that Amazon is considering other alternatives to handle its internal workloads. Although Amazon has been building its own options for a while now. Its Nova family of AI models was announced in late 2024 for Amazon Bedrock, with models aimed at text, image, and video tasks. Amazon pitched the model around cost and latency at that time. With that said, OpenAI has also become a more realistic option recently for AWS customers as well as for Amazon itself. Earlier this year, OpenAI brought its latest models and Codex coding agent to Amazon Bedrock, after changes to its previously more restrictive Microsoft cloud arrangement. This allowed AWS to serve even those customers who wanted other alternatives from Claude, without having to move workloads out of Amazon's cloud. Evaluating alternatives could also be due to commercial pressure and not necessarily a sign of a damaged partnership between Amazon and Anthropic. Whether or not Amazon is actually considering switching entirely to OpenAI's models or its own Nova models remains unknown at this moment.
    • Samsung introduces new AI classroom tools and interactive displays at ISTELive 2026 by Fiza Ali Samsung has announced several new education-focused software features and interactive displays for schools during ISTELive 2026, taking place in Orlando, Florida, from 28 June to 1 July. The focus of these updates is on making shared classroom displays easier to use for teachers while giving IT administrators more control over managing devices. One of the key additions is the Samsung Account Management Solution (AMS). In many schools, multiple teachers share the same interactive display throughout the day, which means signing in and setting everything up can become repetitive. With AMS, teachers can log in by scanning a QR code or tapping an NFC-enabled ID card. Once signed in, their personalised workspace, including wallpapers, bookmarks, app shortcuts, and files, can be instantly accessed through Home Personalisation. Samsung has also included a screen lock feature, allowing teachers to lock the display if they need to step away briefly. Furthermore, the company is also updating its Education Portal with new tools designed for school IT administrators. The portal will allow IT administrators to register teachers, enrol devices, and manage user access from a central dashboard. Administrators can also link NFC cards to teacher accounts, making sign-ins quicker across shared displays. Another addition is a Tags feature that lets schools organise displays by building or classroom. Those tags can also be used to send emergency notifications to selected Samsung Interactive Displays through compatible platforms such as InformaCast and Raptor. Moreover, the tech giant's AI Assistant is gaining several new features aimed at supporting everyday classroom tasks such as lesson planning and classroom engagement. One of the features is Circle to Search, which lets teachers circle text or images on the display to quickly find related information, videos, or web results without interrupting the lesson. The content can then be brought into Samsung Whiteboard. Another feature, Live Transcript, converts spoken lessons into real-time captions, which could be useful for students with hearing impairments or those in multilingual classrooms. The AI Assistant also introduces AI Summary and AI Quiz. The summary tool creates summaries of recorded lessons, while AI Quiz generates questions based on lesson content so teachers can quickly check how well students are following along. Teachers signed in through Samsung AMS can also return to their previous AI-generated lesson materials without logging in again. Alongside the software updates, Samsung has expanded its Android-based Interactive Display range with three new models: the WAF-S, WAFX-PS, and WAHX-M. The WAF-S and WAFX-PS ship with Android 16, bringing updates to security, accessibility, and overall usability while maintaining compatibility with Google's education services including Google Classroom and Google Drive through EDLA certification. Meanwhile, the new WAHX-M is the biggest addition to the lineup, introducing a 98-inch display for larger spaces such as lecture halls and conference rooms. It will also be available in 65-inch, 75-inch and 86-inch sizes. Samsung says the WAHX-M further includes on-device AI features such as voice commands, text-to-speech, and an AI calculator, alongside support for Samsung AMS and AI Assistant. Samsung AI Assistant has been available since April, while Samsung AMS and the updated Education Portal will begin rolling out in July.
    • It's been $24 (single) or $89 (4-pack) for many days on both Amazon and Walmart as far as I know. That isn't a big discount. If these end up like the 1st gen, the 4-pack will routinely get down around $80, give or take a dollar. I think they have even hit $69 at times.
    • Microsoft brings Claude to its own Azure infrastructure, powered by Nvidia GB300 Blackwell by Karthik Mudaliar Anthropic's Claude models are now generally available in Microsoft Foundry on Azure and are running on Nvidia's GB300 Blackwell Ultra systems. Nvidia wrote in its announcement that the models are hosted on Microsoft Azure and accelerated by GB300 Blackwell Ultra GPUs, with Quantum-X800 InfiniBand networking used to support larger agentic systems and specialized sub-agents that can operate across business domains. This is great for customers and enterprises that want to build autonomous and domain-specific AI agents using Claude without moving outside Microsoft’s cloud platform. Microsoft currently offers Claude models in Foundry in two forms: “Hosted on Azure,” which runs end-to-end on Azure infrastructure and is generally available, and “Hosted on Anthropic infrastructure,” which remains in preview. This separation is quite important for organizations that have procurement, compliance, data processing, or internal governance requirements tied to Azure. Anthropic currently has 11 Claude models listed in Microsoft Foundry, including Opus 4.8, Sonnet 4.6, and even the unavailable Mythos and Fable models. Billing is handled through Claude Consumption Units (CCUs). Microsoft says CCU is an invoicing unit for Claude models in Foundry, with token usage converted using Anthropic’s published per-model token rates. The usage is billed through Azure Marketplace just like models from other distributors and appears on the customer's Azure invoice, while eligible spend can count against a Microsoft Azure Consumption Commitment. For starters, GB300 NVL72 is a rack-scale, fully liquid-cooled system that combines 72 Blackwell Ultra GPUs and 36 Grace CPUs. Nvidia has listed 37TB of fast memory, 130TB/s of NVLink bandwidth, and FP4 Tensor Core performance of up to 1,440 petaflops with sparsity. The deal is also part of a three-way partnership between Microsoft, Nvidia, and Anthropic. Under the deal, Anthropic has committed to buying $30 billion in Azure compute capacity and contracting additional capacity up to one gigawatt. Nvidia and Microsoft also said they would invest up to $10 billion and $5 billion in Anthropic, respectively.
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      536
    2. 2
      +Edouard
      269
    3. 3
      PsYcHoKiLLa
      150
    4. 4
      Steven P.
      97
    5. 5
      macoman
      65
  • Tell a friend

    Love Neowin? Tell a friend!